Commit 54032b86 authored by Rafael J. Wysocki's avatar Rafael J. Wysocki

Merge branches 'pm-sleep' and 'pm-cpufreq'

* pm-sleep:
  Documentation: PM: sleep: Document system-wide suspend code flows
  PM: sleep: Add pm_debug_messages kernel command line option
  PM: sleep: core: Drop racy and redundant checks from device_prepare()
  PM: hibernate: Propagate the return value of hibernation_restore()

* pm-cpufreq:
  cpufreq: Select schedutil when using big.LITTLE
  cpufreq: intel_pstate: Select schedutil as the default governor
...@@ -3719,6 +3719,9 @@ ...@@ -3719,6 +3719,9 @@
Override pmtimer IOPort with a hex value. Override pmtimer IOPort with a hex value.
e.g. pmtmr=0x508 e.g. pmtmr=0x508
pm_debug_messages [SUSPEND,KNL]
Enable suspend/resume debug messages during boot up.
pnp.debug=1 [PNP] pnp.debug=1 [PNP]
Enable PNP debug messages (depends on the Enable PNP debug messages (depends on the
CONFIG_PNP_DEBUG_MESSAGES option). Change at run-time CONFIG_PNP_DEBUG_MESSAGES option). Change at run-time
......
.. SPDX-License-Identifier: GPL-2.0
.. include:: <isonum.txt>
=========================
System Suspend Code Flows
=========================
:Copyright: |copy| 2020 Intel Corporation
:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
At least one global system-wide transition needs to be carried out for the
system to get from the working state into one of the supported
:doc:`sleep states <sleep-states>`. Hibernation requires more than one
transition to occur for this purpose, but the other sleep states, commonly
referred to as *system-wide suspend* (or simply *system suspend*) states, need
only one.
For those sleep states, the transition from the working state of the system into
the target sleep state is referred to as *system suspend* too (in the majority
of cases, whether this means a transition or a sleep state of the system should
be clear from the context) and the transition back from the sleep state into the
working state is referred to as *system resume*.
The kernel code flows associated with the suspend and resume transitions for
different sleep states of the system are quite similar, but there are some
significant differences between the :ref:`suspend-to-idle <s2idle>` code flows
and the code flows related to the :ref:`suspend-to-RAM <s2ram>` and
:ref:`standby <standby>` sleep states.
The :ref:`suspend-to-RAM <s2ram>` and :ref:`standby <standby>` sleep states
cannot be implemented without platform support and the difference between them
boils down to the platform-specific actions carried out by the suspend and
resume hooks that need to be provided by the platform driver to make them
available. Apart from that, the suspend and resume code flows for these sleep
states are mostly identical, so they both together will be referred to as
*platform-dependent suspend* states in what follows.
.. _s2idle_suspend:
Suspend-to-idle Suspend Code Flow
=================================
The following steps are taken in order to transition the system from the working
state to the :ref:`suspend-to-idle <s2idle>` sleep state:
1. Invoking system-wide suspend notifiers.
Kernel subsystems can register callbacks to be invoked when the suspend
transition is about to occur and when the resume transition has finished.
That allows them to prepare for the change of the system state and to clean
up after getting back to the working state.
2. Freezing tasks.
Tasks are frozen primarily in order to avoid unchecked hardware accesses
from user space through MMIO regions or I/O registers exposed directly to
it and to prevent user space from entering the kernel while the next step
of the transition is in progress (which might have been problematic for
various reasons).
All user space tasks are intercepted as though they were sent a signal and
put into uninterruptible sleep until the end of the subsequent system resume
transition.
The kernel threads that choose to be frozen during system suspend for
specific reasons are frozen subsequently, but they are not intercepted.
Instead, they are expected to periodically check whether or not they need
to be frozen and to put themselves into uninterruptible sleep if so. [Note,
however, that kernel threads can use locking and other concurrency controls
available in kernel space to synchronize themselves with system suspend and
resume, which can be much more precise than the freezing, so the latter is
not a recommended option for kernel threads.]
3. Suspending devices and reconfiguring IRQs.
Devices are suspended in four phases called *prepare*, *suspend*,
*late suspend* and *noirq suspend* (see :ref:`driverapi_pm_devices` for more
information on what exactly happens in each phase).
Every device is visited in each phase, but typically it is not physically
accessed in more than two of them.
The runtime PM API is disabled for every device during the *late* suspend
phase and high-level ("action") interrupt handlers are prevented from being
invoked before the *noirq* suspend phase.
Interrupts are still handled after that, but they are only acknowledged to
interrupt controllers without performing any device-specific actions that
would be triggered in the working state of the system (those actions are
deferred till the subsequent system resume transition as described
`below <s2idle_resume_>`_).
IRQs associated with system wakeup devices are "armed" so that the resume
transition of the system is started when one of them signals an event.
4. Freezing the scheduler tick and suspending timekeeping.
When all devices have been suspended, CPUs enter the idle loop and are put
into the deepest available idle state. While doing that, each of them
"freezes" its own scheduler tick so that the timer events associated with
the tick do not occur until the CPU is woken up by another interrupt source.
The last CPU to enter the idle state also stops the timekeeping which
(among other things) prevents high resolution timers from triggering going
forward until the first CPU that is woken up restarts the timekeeping.
That allows the CPUs to stay in the deep idle state relatively long in one
go.
From this point on, the CPUs can only be woken up by non-timer hardware
interrupts. If that happens, they go back to the idle state unless the
interrupt that woke up one of them comes from an IRQ that has been armed for
system wakeup, in which case the system resume transition is started.
.. _s2idle_resume:
Suspend-to-idle Resume Code Flow
================================
The following steps are taken in order to transition the system from the
:ref:`suspend-to-idle <s2idle>` sleep state into the working state:
1. Resuming timekeeping and unfreezing the scheduler tick.
When one of the CPUs is woken up (by a non-timer hardware interrupt), it
leaves the idle state entered in the last step of the preceding suspend
transition, restarts the timekeeping (unless it has been restarted already
by another CPU that woke up earlier) and the scheduler tick on that CPU is
unfrozen.
If the interrupt that has woken up the CPU was armed for system wakeup,
the system resume transition begins.
2. Resuming devices and restoring the working-state configuration of IRQs.
Devices are resumed in four phases called *noirq resume*, *early resume*,
*resume* and *complete* (see :ref:`driverapi_pm_devices` for more
information on what exactly happens in each phase).
Every device is visited in each phase, but typically it is not physically
accessed in more than two of them.
The working-state configuration of IRQs is restored after the *noirq* resume
phase and the runtime PM API is re-enabled for every device whose driver
supports it during the *early* resume phase.
3. Thawing tasks.
Tasks frozen in step 2 of the preceding `suspend <s2idle_suspend_>`_
transition are "thawed", which means that they are woken up from the
uninterruptible sleep that they went into at that time and user space tasks
are allowed to exit the kernel.
4. Invoking system-wide resume notifiers.
This is analogous to step 1 of the `suspend <s2idle_suspend_>`_ transition
and the same set of callbacks is invoked at this point, but a different
"notification type" parameter value is passed to them.
Platform-dependent Suspend Code Flow
====================================
The following steps are taken in order to transition the system from the working
state to platform-dependent suspend state:
1. Invoking system-wide suspend notifiers.
This step is the same as step 1 of the suspend-to-idle suspend transition
described `above <s2idle_suspend_>`_.
2. Freezing tasks.
This step is the same as step 2 of the suspend-to-idle suspend transition
described `above <s2idle_suspend_>`_.
3. Suspending devices and reconfiguring IRQs.
This step is analogous to step 3 of the suspend-to-idle suspend transition
described `above <s2idle_suspend_>`_, but the arming of IRQs for system
wakeup generally does not have any effect on the platform.
There are platforms that can go into a very deep low-power state internally
when all CPUs in them are in sufficiently deep idle states and all I/O
devices have been put into low-power states. On those platforms,
suspend-to-idle can reduce system power very effectively.
On the other platforms, however, low-level components (like interrupt
controllers) need to be turned off in a platform-specific way (implemented
in the hooks provided by the platform driver) to achieve comparable power
reduction.
That usually prevents in-band hardware interrupts from waking up the system,
which must be done in a special platform-dependent way. Then, the
configuration of system wakeup sources usually starts when system wakeup
devices are suspended and is finalized by the platform suspend hooks later
on.
4. Disabling non-boot CPUs.
On some platforms the suspend hooks mentioned above must run in a one-CPU
configuration of the system (in particular, the hardware cannot be accessed
by any code running in parallel with the platform suspend hooks that may,
and often do, trap into the platform firmware in order to finalize the
suspend transition).
For this reason, the CPU offline/online (CPU hotplug) framework is used
to take all of the CPUs in the system, except for one (the boot CPU),
offline (typically, the CPUs that have been taken offline go into deep idle
states).
This means that all tasks are migrated away from those CPUs and all IRQs are
rerouted to the only CPU that remains online.
5. Suspending core system components.
This prepares the core system components for (possibly) losing power going
forward and suspends the timekeeping.
6. Platform-specific power removal.
This is expected to remove power from all of the system components except
for the memory controller and RAM (in order to preserve the contents of the
latter) and some devices designated for system wakeup.
In many cases control is passed to the platform firmware which is expected
to finalize the suspend transition as needed.
Platform-dependent Resume Code Flow
===================================
The following steps are taken in order to transition the system from a
platform-dependent suspend state into the working state:
1. Platform-specific system wakeup.
The platform is woken up by a signal from one of the designated system
wakeup devices (which need not be an in-band hardware interrupt) and
control is passed back to the kernel (the working configuration of the
platform may need to be restored by the platform firmware before the
kernel gets control again).
2. Resuming core system components.
The suspend-time configuration of the core system components is restored and
the timekeeping is resumed.
3. Re-enabling non-boot CPUs.
The CPUs disabled in step 4 of the preceding suspend transition are taken
back online and their suspend-time configuration is restored.
4. Resuming devices and restoring the working-state configuration of IRQs.
This step is the same as step 2 of the suspend-to-idle suspend transition
described `above <s2idle_resume_>`_.
5. Thawing tasks.
This step is the same as step 3 of the suspend-to-idle suspend transition
described `above <s2idle_resume_>`_.
6. Invoking system-wide resume notifiers.
This step is the same as step 4 of the suspend-to-idle suspend transition
described `above <s2idle_resume_>`_.
...@@ -8,3 +8,4 @@ System-Wide Power Management ...@@ -8,3 +8,4 @@ System-Wide Power Management
:maxdepth: 2 :maxdepth: 2
sleep-states sleep-states
suspend-flows
...@@ -1922,10 +1922,6 @@ static int device_prepare(struct device *dev, pm_message_t state) ...@@ -1922,10 +1922,6 @@ static int device_prepare(struct device *dev, pm_message_t state)
if (dev->power.syscore) if (dev->power.syscore)
return 0; return 0;
WARN_ON(!pm_runtime_enabled(dev) &&
dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND |
DPM_FLAG_LEAVE_SUSPENDED));
/* /*
* If a device's parent goes into runtime suspend at the wrong time, * If a device's parent goes into runtime suspend at the wrong time,
* it won't be possible to resume the device. To prevent this we * it won't be possible to resume the device. To prevent this we
...@@ -1973,8 +1969,7 @@ static int device_prepare(struct device *dev, pm_message_t state) ...@@ -1973,8 +1969,7 @@ static int device_prepare(struct device *dev, pm_message_t state)
*/ */
spin_lock_irq(&dev->power.lock); spin_lock_irq(&dev->power.lock);
dev->power.direct_complete = state.event == PM_EVENT_SUSPEND && dev->power.direct_complete = state.event == PM_EVENT_SUSPEND &&
((pm_runtime_suspended(dev) && ret > 0) || (ret > 0 || dev->power.no_pm_callbacks) &&
dev->power.no_pm_callbacks) &&
!dev_pm_test_driver_flags(dev, DPM_FLAG_NEVER_SKIP); !dev_pm_test_driver_flags(dev, DPM_FLAG_NEVER_SKIP);
spin_unlock_irq(&dev->power.lock); spin_unlock_irq(&dev->power.lock);
return 0; return 0;
......
...@@ -37,10 +37,12 @@ config CPU_FREQ_STAT ...@@ -37,10 +37,12 @@ config CPU_FREQ_STAT
choice choice
prompt "Default CPUFreq governor" prompt "Default CPUFreq governor"
default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ
default CPU_FREQ_DEFAULT_GOV_SCHEDUTIL if BIG_LITTLE
default CPU_FREQ_DEFAULT_GOV_SCHEDUTIL if X86_INTEL_PSTATE && SMP
default CPU_FREQ_DEFAULT_GOV_PERFORMANCE default CPU_FREQ_DEFAULT_GOV_PERFORMANCE
help help
This option sets which CPUFreq governor shall be loaded at This option sets which CPUFreq governor shall be loaded at
startup. If in doubt, select 'performance'. startup. If in doubt, use the default setting.
config CPU_FREQ_DEFAULT_GOV_PERFORMANCE config CPU_FREQ_DEFAULT_GOV_PERFORMANCE
bool "performance" bool "performance"
......
...@@ -8,6 +8,8 @@ config X86_INTEL_PSTATE ...@@ -8,6 +8,8 @@ config X86_INTEL_PSTATE
depends on X86 depends on X86
select ACPI_PROCESSOR if ACPI select ACPI_PROCESSOR if ACPI
select ACPI_CPPC_LIB if X86_64 && ACPI && SCHED_MC_PRIO select ACPI_CPPC_LIB if X86_64 && ACPI && SCHED_MC_PRIO
select CPU_FREQ_GOV_PERFORMANCE
select CPU_FREQ_GOV_SCHEDUTIL if SMP
help help
This driver provides a P state for Intel core processors. This driver provides a P state for Intel core processors.
The driver implements an internal governor and will become The driver implements an internal governor and will become
......
...@@ -678,7 +678,7 @@ static int load_image_and_restore(void) ...@@ -678,7 +678,7 @@ static int load_image_and_restore(void)
error = swsusp_read(&flags); error = swsusp_read(&flags);
swsusp_close(FMODE_READ); swsusp_close(FMODE_READ);
if (!error) if (!error)
hibernation_restore(flags & SF_PLATFORM_MODE); error = hibernation_restore(flags & SF_PLATFORM_MODE);
pr_err("Failed to load image, recovering.\n"); pr_err("Failed to load image, recovering.\n");
swsusp_free(); swsusp_free();
......
...@@ -535,6 +535,13 @@ static ssize_t pm_debug_messages_store(struct kobject *kobj, ...@@ -535,6 +535,13 @@ static ssize_t pm_debug_messages_store(struct kobject *kobj,
power_attr(pm_debug_messages); power_attr(pm_debug_messages);
static int __init pm_debug_messages_setup(char *str)
{
pm_debug_messages_on = true;
return 1;
}
__setup("pm_debug_messages", pm_debug_messages_setup);
/** /**
* __pm_pr_dbg - Print a suspend debug message to the kernel log. * __pm_pr_dbg - Print a suspend debug message to the kernel log.
* @defer: Whether or not to use printk_deferred() to print the message. * @defer: Whether or not to use printk_deferred() to print the message.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment