mt76x0: mcu files

Add mcu files of mt76x0 driver.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h

+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MT76X0U_MCU_H
+#define __MT76X0U_MCU_H
+
+struct mt76x0_dev;
+
+/* Register definitions */
+#define MT_MCU_RESET_CTL		0x070C
+#define MT_MCU_INT_LEVEL		0x0718
+#define MT_MCU_COM_REG0			0x0730
+#define MT_MCU_COM_REG1			0x0734
+#define MT_MCU_COM_REG2			0x0738
+#define MT_MCU_COM_REG3			0x073C
+
+#define MT_MCU_IVB_SIZE			0x40
+#define MT_MCU_DLM_OFFSET		0x80000
+
+#define MT_MCU_MEMMAP_WLAN		0x00410000
+/* We use same space for BBP as for MAC regs
+ * #define MT_MCU_MEMMAP_BBP		0x40000000
+ */
+#define MT_MCU_MEMMAP_RF		0x80000000
+
+#define INBAND_PACKET_MAX_LEN		192
+
+enum mcu_cmd {
+	CMD_FUN_SET_OP = 1,
+	CMD_LOAD_CR = 2,
+	CMD_INIT_GAIN_OP = 3,
+	CMD_DYNC_VGA_OP = 6,
+	CMD_TDLS_CH_SW = 7,
+	CMD_BURST_WRITE = 8,
+	CMD_READ_MODIFY_WRITE = 9,
+	CMD_RANDOM_READ = 10,
+	CMD_BURST_READ = 11,
+	CMD_RANDOM_WRITE = 12,
+	CMD_LED_MODE_OP = 16,
+	CMD_POWER_SAVING_OP = 20,
+	CMD_WOW_CONFIG = 21,
+	CMD_WOW_QUERY = 22,
+	CMD_WOW_FEATURE = 24,
+	CMD_CARRIER_DETECT_OP = 28,
+	CMD_RADOR_DETECT_OP = 29,
+	CMD_SWITCH_CHANNEL_OP = 30,
+	CMD_CALIBRATION_OP = 31,
+	CMD_BEACON_OP = 32,
+	CMD_ANTENNA_OP = 33,
+};
+
+enum mcu_function {
+	Q_SELECT = 1,
+	BW_SETTING = 2,
+	ATOMIC_TSSI_SETTING = 5,
+};
+
+enum mcu_power_mode {
+	RADIO_OFF = 0x30,
+	RADIO_ON = 0x31,
+	RADIO_OFF_AUTO_WAKEUP = 0x32,
+	RADIO_OFF_ADVANCE = 0x33,
+	RADIO_ON_ADVANCE = 0x34,
+};
+
+enum mcu_calibrate {
+	MCU_CAL_R = 1,
+	MCU_CAL_RXDCOC,
+	MCU_CAL_LC,
+	MCU_CAL_LOFT,
+	MCU_CAL_TXIQ,
+	MCU_CAL_BW,
+	MCU_CAL_DPD,
+	MCU_CAL_RXIQ,
+	MCU_CAL_TXDCOC,
+	MCU_CAL_RX_GROUP_DELAY,
+	MCU_CAL_TX_GROUP_DELAY,
+};
+
+int mt76x0_mcu_init(struct mt76x0_dev *dev);
+int mt76x0_mcu_cmd_init(struct mt76x0_dev *dev);
+void mt76x0_mcu_cmd_deinit(struct mt76x0_dev *dev);
+
+int
+mt76x0_mcu_calibrate(struct mt76x0_dev *dev, enum mcu_calibrate cal, u32 val);
+
+int
+mt76x0_mcu_function_select(struct mt76x0_dev *dev, enum mcu_function func, u32 val);
+
+#endif