Merge tag 'mmc-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:

   - Fix partition switch time for eMMC

  MMC host:

   - mmci: Enforce R1B response to fix busy detection for
     the stm32 variants

   - cqhci: Fix crash when removing mmc module/card"

* tag 'mmc-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: cqhci: Fix random crash when remove mmc module/card
  mmc: core: Fix partition switch time for eMMC
  mmc: mmci: Add MMC_CAP_NEED_RSP_BUSY for the stm32 variants

drivers/mmc/core/bus.c

@@ -399,11 +399,6 @@ void mmc_remove_card(struct mmc_card *card)
 	mmc_remove_card_debugfs(card);
 #endif
 
-	if (host->cqe_enabled) {
-		host->cqe_ops->cqe_disable(host);
-		host->cqe_enabled = false;
-	}
-
 	if (mmc_card_present(card)) {
 		if (mmc_host_is_spi(card->host)) {
 			pr_info("%s: SPI card removed\n",
@@ -416,6 +411,10 @@ void mmc_remove_card(struct mmc_card *card)
 		of_node_put(card->dev.of_node);
 	}
 
+	if (host->cqe_enabled) {
+		host->cqe_ops->cqe_disable(host);
+		host->cqe_enabled = false;
+	}
+
 	put_device(&card->dev);
 }
-

drivers/mmc/core/mmc.c

@@ -423,10 +423,6 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
 
 		/* EXT_CSD value is in units of 10ms, but we store in ms */
 		card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME];
-		/* Some eMMC set the value too low so set a minimum */
-		if (card->ext_csd.part_time &&
-		    card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME)
-			card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME;
 
 		/* Sleep / awake timeout in 100ns units */
 		if (sa_shift > 0 && sa_shift <= 0x17)
@@ -616,6 +612,17 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		card->ext_csd.data_sector_size = 512;
 	}
 
+	/*
+	 * GENERIC_CMD6_TIME is to be used "unless a specific timeout is defined
+	 * when accessing a specific field", so use it here if there is no
+	 * PARTITION_SWITCH_TIME.
+	 */
+	if (!card->ext_csd.part_time)
+		card->ext_csd.part_time = card->ext_csd.generic_cmd6_time;
+	/* Some eMMC set the value too low so set a minimum */
+	if (card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME)
+		card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME;
+
 	/* eMMC v5 or later */
 	if (card->ext_csd.rev >= 7) {
 		memcpy(card->ext_csd.fwrev, &ext_csd[EXT_CSD_FIRMWARE_VERSION],

drivers/mmc/host/mmci.c

@@ -1242,7 +1242,11 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
 		if (!cmd->busy_timeout)
 			cmd->busy_timeout = 10 * MSEC_PER_SEC;
 
+		if (cmd->busy_timeout > host->mmc->max_busy_timeout)
+			clks = (unsigned long long)host->mmc->max_busy_timeout * host->cclk;
+		else
 			clks = (unsigned long long)cmd->busy_timeout * host->cclk;
+
 		do_div(clks, MSEC_PER_SEC);
 		writel_relaxed(clks, host->base + MMCIDATATIMER);
 	}
@@ -2151,6 +2155,10 @@ static int mmci_probe(struct amba_device *dev,
 		mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
 	}
 
+	/* Variants with mandatory busy timeout in HW needs R1B responses. */
+	if (variant->busy_timeout)
+		mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
+
 	/* Prepare a CMD12 - needed to clear the DPSM on some variants. */
 	host->stop_abort.opcode = MMC_STOP_TRANSMISSION;
 	host->stop_abort.arg = 0;