Commit 57a8930a authored by Bartosz Markowski's avatar Bartosz Markowski Committed by Kalle Valo

ath10k: Remove qca98xx hw1.0 support

Since the firmware support is no longer available for hw1.0,
drop all code (especially workarounds) for those units.
Signed-off-by: default avatarBartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
parent c69029b1
......@@ -76,36 +76,7 @@ static inline void ath10k_ce_src_ring_write_index_set(struct ath10k *ar,
u32 ce_ctrl_addr,
unsigned int n)
{
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
void __iomem *indicator_addr;
if (!test_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features)) {
ath10k_pci_write32(ar, ce_ctrl_addr + SR_WR_INDEX_ADDRESS, n);
return;
}
/* workaround for QCA988x_1.0 HW CE */
indicator_addr = ar_pci->mem + ce_ctrl_addr + DST_WATERMARK_ADDRESS;
if (ce_ctrl_addr == ath10k_ce_base_address(CDC_WAR_DATA_CE)) {
iowrite32((CDC_WAR_MAGIC_STR | n), indicator_addr);
} else {
unsigned long irq_flags;
local_irq_save(irq_flags);
iowrite32(1, indicator_addr);
/*
* PCIE write waits for ACK in IPQ8K, there is no
* need to read back value.
*/
(void)ioread32(indicator_addr);
(void)ioread32(indicator_addr); /* conservative */
ath10k_pci_write32(ar, ce_ctrl_addr + SR_WR_INDEX_ADDRESS, n);
iowrite32(0, indicator_addr);
local_irq_restore(irq_flags);
}
}
static inline u32 ath10k_ce_src_ring_write_index_get(struct ath10k *ar,
......
......@@ -38,17 +38,6 @@ MODULE_PARM_DESC(uart_print, "Uart target debugging");
MODULE_PARM_DESC(p2p, "Enable ath10k P2P support");
static const struct ath10k_hw_params ath10k_hw_params_list[] = {
{
.id = QCA988X_HW_1_0_VERSION,
.name = "qca988x hw1.0",
.patch_load_addr = QCA988X_HW_1_0_PATCH_LOAD_ADDR,
.fw = {
.dir = QCA988X_HW_1_0_FW_DIR,
.fw = QCA988X_HW_1_0_FW_FILE,
.otp = QCA988X_HW_1_0_OTP_FILE,
.board = QCA988X_HW_1_0_BOARD_DATA_FILE,
},
},
{
.id = QCA988X_HW_2_0_VERSION,
.name = "qca988x hw2.0",
......
......@@ -26,14 +26,6 @@
#define SUPPORTED_FW_RELEASE 0
#define SUPPORTED_FW_BUILD 629
/* QCA988X 1.0 definitions */
#define QCA988X_HW_1_0_VERSION 0x4000002c
#define QCA988X_HW_1_0_FW_DIR "ath10k/QCA988X/hw1.0"
#define QCA988X_HW_1_0_FW_FILE "firmware.bin"
#define QCA988X_HW_1_0_OTP_FILE "otp.bin"
#define QCA988X_HW_1_0_BOARD_DATA_FILE "board.bin"
#define QCA988X_HW_1_0_PATCH_LOAD_ADDR 0x1234
/* QCA988X 2.0 definitions */
#define QCA988X_HW_2_0_VERSION 0x4100016c
#define QCA988X_HW_2_0_FW_DIR "ath10k/QCA988X/hw2.0"
......
......@@ -36,11 +36,9 @@ static unsigned int ath10k_target_ps;
module_param(ath10k_target_ps, uint, 0644);
MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option");
#define QCA988X_1_0_DEVICE_ID (0xabcd)
#define QCA988X_2_0_DEVICE_ID (0x003c)
static DEFINE_PCI_DEVICE_TABLE(ath10k_pci_id_table) = {
{ PCI_VDEVICE(ATHEROS, QCA988X_1_0_DEVICE_ID) }, /* PCI-E QCA988X V1 */
{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
{0}
};
......@@ -2269,9 +2267,6 @@ static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci)
case ATH10K_PCI_FEATURE_MSI_X:
ath10k_dbg(ATH10K_DBG_PCI, "device supports MSI-X\n");
break;
case ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND:
ath10k_dbg(ATH10K_DBG_PCI, "QCA988X_1.0 workaround enabled\n");
break;
case ATH10K_PCI_FEATURE_SOC_POWER_SAVE:
ath10k_dbg(ATH10K_DBG_PCI, "QCA98XX SoC power save enabled\n");
break;
......@@ -2298,9 +2293,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
ar_pci->dev = &pdev->dev;
switch (pci_dev->device) {
case QCA988X_1_0_DEVICE_ID:
set_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features);
break;
case QCA988X_2_0_DEVICE_ID:
set_bit(ATH10K_PCI_FEATURE_MSI_X, ar_pci->features);
break;
......@@ -2322,10 +2314,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
goto err_ar_pci;
}
/* Enable QCA988X_1.0 HW workarounds */
if (test_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features))
spin_lock_init(&ar_pci->hw_v1_workaround_lock);
ar_pci->ar = ar;
ar_pci->fw_indicator_address = FW_INDICATOR_ADDRESS;
atomic_set(&ar_pci->keep_awake_count, 0);
......@@ -2483,9 +2471,6 @@ module_exit(ath10k_pci_exit);
MODULE_AUTHOR("Qualcomm Atheros");
MODULE_DESCRIPTION("Driver support for Atheros QCA988X PCIe devices");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_FW_FILE);
MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_OTP_FILE);
MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_BOARD_DATA_FILE);
MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_FILE);
MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_OTP_FILE);
MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE);
......@@ -152,8 +152,7 @@ struct service_to_pipe {
enum ath10k_pci_features {
ATH10K_PCI_FEATURE_MSI_X = 0,
ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND = 1,
ATH10K_PCI_FEATURE_SOC_POWER_SAVE = 2,
ATH10K_PCI_FEATURE_SOC_POWER_SAVE = 1,
/* keep last */
ATH10K_PCI_FEATURE_COUNT
......@@ -234,9 +233,6 @@ struct ath10k_pci {
/* Map CE id to ce_state */
struct ce_state *ce_id_to_state[CE_COUNT_MAX];
/* makes sure that dummy reads are atomic */
spinlock_t hw_v1_workaround_lock;
};
static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar)
......@@ -310,23 +306,8 @@ static inline void ath10k_pci_write32(struct ath10k *ar, u32 offset,
u32 value)
{
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
void __iomem *addr = ar_pci->mem;
if (test_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features)) {
unsigned long irq_flags;
spin_lock_irqsave(&ar_pci->hw_v1_workaround_lock, irq_flags);
ioread32(addr+offset+4); /* 3rd read prior to write */
ioread32(addr+offset+4); /* 2nd read prior to write */
ioread32(addr+offset+4); /* 1st read prior to write */
iowrite32(value, addr+offset);
spin_unlock_irqrestore(&ar_pci->hw_v1_workaround_lock,
irq_flags);
} else {
iowrite32(value, addr+offset);
}
iowrite32(value, ar_pci->mem + offset);
}
static inline u32 ath10k_pci_read32(struct ath10k *ar, u32 offset)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment