PCI: add pci_swizzle_interrupt_pin()

This patch adds pci_swizzle_interrupt_pin(), which implements the
INTx swizzling algorithm specified in Table 9-1 of the "PCI-to-PCI
Bridge Architecture Specification," revision 1.2.

There are many architecture-specific implementations of this
swizzle that can be replaced by this common one.
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

drivers/pci/pci.c

@@ -1366,6 +1366,20 @@ void pci_enable_ari(struct pci_dev *dev)
 	bridge->ari_enabled = 1;
 }
 
+/**
+ * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
+ * @dev: the PCI device
+ * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTD, 4=INTD)
+ *
+ * Perform INTx swizzling for a device behind one level of bridge.  This is
+ * required by section 9.1 of the PCI-to-PCI bridge specification for devices
+ * behind bridges on add-in cards.
+ */
+u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin)
+{
+	return (((pin - 1) + PCI_SLOT(dev->devfn)) % 4) + 1;
+}
+
 int
 pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
 {
@@ -1376,7 +1390,7 @@ pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
 		return -1;
 
 	while (dev->bus->self) {
-		pin = (((pin - 1) + PCI_SLOT(dev->devfn)) % 4) + 1;
+		pin = pci_swizzle_interrupt_pin(dev, pin);
 		dev = dev->bus->self;
 	}
 	*bridge = dev;

include/linux/pci.h

@@ -532,6 +532,7 @@ int __must_check pci_bus_add_device(struct pci_dev *dev);
 void pci_read_bridge_bases(struct pci_bus *child);
 struct resource *pci_find_parent_resource(const struct pci_dev *dev,
 					  struct resource *res);
+u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin);
 int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge);
 extern struct pci_dev *pci_dev_get(struct pci_dev *dev);
 extern void pci_dev_put(struct pci_dev *dev);