video: udlfb: Switch from the pr_*() to the dev_*() logging functions

Use dev_err() and dev_info() instead of pr_err() and pr_info().
USB device is used as argument to dev_*() functions for probe
and urb manipulation, FB device for framebuffer related info.

Also noisy device probe output was partly removed as idVendor,
idProduct, name and serial are already printed by usb core,
and partly turned into debug output.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

drivers/video/fbdev/udlfb.c

@@ -16,8 +16,6 @@
  * from Florian Echtler, Henrik Bjerregaard Pedersen, and others.
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -333,7 +331,7 @@ static int dlfb_ops_mmap(struct fb_info *info, struct vm_area_struct *vma)
 
 	pos = (unsigned long)info->fix.smem_start + offset;
 
-	pr_notice("mmap() framebuffer addr:%lu size:%lu\n",
+	dev_dbg(info->dev, "mmap() framebuffer addr:%lu size:%lu\n",
 		pos, size);
 
 	while (size > 0) {
@@ -757,8 +755,7 @@ static void dlfb_dpy_deferred_io(struct fb_info *info,
 
 static int dlfb_get_edid(struct dlfb_data *dlfb, char *edid, int len)
 {
-	int i;
-	int ret;
+	int i, ret;
 	char *rbuf;
 
 	rbuf = kmalloc(2, GFP_KERNEL);
@@ -771,7 +768,8 @@ static int dlfb_get_edid(struct dlfb_data *dlfb, char *edid, int len)
 				      (0x80 | (0x02 << 5)), i << 8, 0xA1,
 				      rbuf, 2, USB_CTRL_GET_TIMEOUT);
 		if (ret < 2) {
-			pr_err("Read EDID byte %d failed: %d\n", i, ret);
+			dev_err(&dlfb->udev->dev,
+				"Read EDID byte %d failed: %d\n", i, ret);
 			i--;
 			break;
 		}
@@ -905,8 +903,8 @@ static int dlfb_ops_open(struct fb_info *info, int user)
 		fb_deferred_io_init(info);
 	}
 
-	pr_notice("open /dev/fb%d user=%d fb_info=%p count=%d\n",
-	    info->node, user, info, dlfb->fb_count);
+	dev_dbg(info->dev, "open, user=%d fb_info=%p count=%d\n",
+		user, info, dlfb->fb_count);
 
 	return 0;
 }
@@ -984,8 +982,7 @@ static int dlfb_ops_release(struct fb_info *info, int user)
 		info->fbops->fb_mmap = dlfb_ops_mmap;
 	}
 
-	pr_warn("released /dev/fb%d user=%d count=%d\n",
-		  info->node, user, dlfb->fb_count);
+	dev_dbg(info->dev, "release, user=%d count=%d\n", user, dlfb->fb_count);
 
 	kref_put(&dlfb->kref, dlfb_free);
 
@@ -996,19 +993,10 @@ static int dlfb_ops_release(struct fb_info *info, int user)
  * Check whether a video mode is supported by the DisplayLink chip
  * We start from monitor's modes, so don't need to filter that here
  */
-static int dlfb_is_valid_mode(struct fb_videomode *mode,
-		struct fb_info *info)
+static int dlfb_is_valid_mode(struct fb_videomode *mode, struct dlfb_data *dlfb)
 {
-	struct dlfb_data *dlfb = info->par;
-
-	if (mode->xres * mode->yres > dlfb->sku_pixel_limit) {
-		pr_warn("%dx%d beyond chip capabilities\n",
-		       mode->xres, mode->yres);
+	if (mode->xres * mode->yres > dlfb->sku_pixel_limit)
 		return 0;
-	}
-
-	pr_info("%dx%d @ %d Hz valid mode\n", mode->xres, mode->yres,
-		mode->refresh);
 
 	return 1;
 }
@@ -1029,6 +1017,7 @@ static int dlfb_ops_check_var(struct fb_var_screeninfo *var,
 				struct fb_info *info)
 {
 	struct fb_videomode mode;
+	struct dlfb_data *dlfb = info->par;
 
 	/* TODO: support dynamically changing framebuffer size */
 	if ((var->xres * var->yres * 2) > info->fix.smem_len)
@@ -1039,7 +1028,7 @@ static int dlfb_ops_check_var(struct fb_var_screeninfo *var,
 
 	fb_var_to_videomode(&mode, var);
 
-	if (!dlfb_is_valid_mode(&mode, info))
+	if (!dlfb_is_valid_mode(&mode, dlfb))
 		return -EINVAL;
 
 	return 0;
@@ -1093,8 +1082,8 @@ static int dlfb_ops_blank(int blank_mode, struct fb_info *info)
 	char *bufptr;
 	struct urb *urb;
 
-	pr_debug("/dev/fb%d FB_BLANK mode %d --> %d\n",
-		 info->node, dlfb->blank_mode, blank_mode);
+	dev_dbg(info->dev, "blank, mode %d --> %d\n",
+		dlfb->blank_mode, blank_mode);
 
 	if ((dlfb->blank_mode == FB_BLANK_POWERDOWN) &&
 	    (blank_mode != FB_BLANK_POWERDOWN)) {
@@ -1162,7 +1151,7 @@ static int dlfb_realloc_framebuffer(struct dlfb_data *dlfb, struct fb_info *info
 		 */
 		new_fb = vmalloc(new_len);
 		if (!new_fb) {
-			pr_err("Virtual framebuffer alloc failed\n");
+			dev_err(info->dev, "Virtual framebuffer alloc failed\n");
 			goto error;
 		}
 
@@ -1185,7 +1174,8 @@ static int dlfb_realloc_framebuffer(struct dlfb_data *dlfb, struct fb_info *info
 		if (shadow)
 			new_back = vzalloc(new_len);
 		if (!new_back)
-			pr_info("No shadow/backing buffer allocated\n");
+			dev_info(info->dev,
+				 "No shadow/backing buffer allocated\n");
 		else {
 			vfree(dlfb->backing_buffer);
 			dlfb->backing_buffer = new_back;
@@ -1216,14 +1206,18 @@ static int dlfb_setup_modes(struct dlfb_data *dlfb,
 			   struct fb_info *info,
 			   char *default_edid, size_t default_edid_size)
 {
-	int i;
-	const struct fb_videomode *default_vmode = NULL;
-	int result = 0;
 	char *edid;
-	int tries = 3;
+	int i, result = 0, tries = 3;
+	struct device *dev = info->device;
+	struct fb_videomode *mode;
+	const struct fb_videomode *default_vmode = NULL;
 
-	if (info->dev) /* only use mutex if info has been registered */
+	if (info->dev) {
+		/* only use mutex if info has been registered */
 		mutex_lock(&info->lock);
+		/* parent device is used otherwise */
+		dev = info->dev;
+	}
 
 	edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
 	if (!edid) {
@@ -1255,13 +1249,12 @@ static int dlfb_setup_modes(struct dlfb_data *dlfb,
 
 	/* If that fails, use a previously returned EDID if available */
 	if (info->monspecs.modedb_len == 0) {
-
-		pr_err("Unable to get valid EDID from device/display\n");
+		dev_err(dev, "Unable to get valid EDID from device/display\n");
 
 		if (dlfb->edid) {
 			fb_edid_to_monspecs(dlfb->edid, &info->monspecs);
 			if (info->monspecs.modedb_len > 0)
-				pr_err("Using previously queried EDID\n");
+				dev_err(dev, "Using previously queried EDID\n");
 		}
 	}
 
@@ -1273,7 +1266,7 @@ static int dlfb_setup_modes(struct dlfb_data *dlfb,
 				memcpy(edid, default_edid, default_edid_size);
 				dlfb->edid = edid;
 				dlfb->edid_size = default_edid_size;
-				pr_err("Using default/backup EDID\n");
+				dev_err(dev, "Using default/backup EDID\n");
 			}
 		}
 	}
@@ -1282,10 +1275,12 @@ static int dlfb_setup_modes(struct dlfb_data *dlfb,
 	if (info->monspecs.modedb_len > 0) {
 
 		for (i = 0; i < info->monspecs.modedb_len; i++) {
-			if (dlfb_is_valid_mode(&info->monspecs.modedb[i], info))
-				fb_add_videomode(&info->monspecs.modedb[i],
-					&info->modelist);
-			else {
+			mode = &info->monspecs.modedb[i];
+			if (dlfb_is_valid_mode(mode, dlfb)) {
+				fb_add_videomode(mode, &info->modelist);
+			} else {
+				dev_dbg(dev, "Specified mode %dx%d too big\n",
+					mode->xres, mode->yres);
 				if (i == 0)
 					/* if we've removed top/best mode */
 					info->monspecs.misc
@@ -1309,10 +1304,12 @@ static int dlfb_setup_modes(struct dlfb_data *dlfb,
 		 * But at least the user has a chance to choose
 		 */
 		for (i = 0; i < VESA_MODEDB_SIZE; i++) {
-			if (dlfb_is_valid_mode((struct fb_videomode *)
-						&vesa_modes[i], info))
-				fb_add_videomode(&vesa_modes[i],
-						 &info->modelist);
+			mode = (struct fb_videomode *)&vesa_modes[i];
+			if (dlfb_is_valid_mode(mode, dlfb))
+				fb_add_videomode(mode, &info->modelist);
+			else
+				dev_dbg(dev, "VESA mode %dx%d too big\n",
+					mode->xres, mode->yres);
 		}
 
 		/*
@@ -1492,7 +1489,7 @@ static int dlfb_select_std_channel(struct dlfb_data *dlfb)
 }
 
 static int dlfb_parse_vendor_descriptor(struct dlfb_data *dlfb,
-					struct usb_interface *interface)
+					struct usb_interface *intf)
 {
 	char *desc;
 	char *buf;
@@ -1504,20 +1501,21 @@ static int dlfb_parse_vendor_descriptor(struct dlfb_data *dlfb,
 		return false;
 	desc = buf;
 
-	total_len = usb_get_descriptor(interface_to_usbdev(interface),
+	total_len = usb_get_descriptor(interface_to_usbdev(intf),
 					0x5f, /* vendor specific */
 					0, desc, MAX_VENDOR_DESCRIPTOR_SIZE);
 
 	/* if not found, look in configuration descriptor */
 	if (total_len < 0) {
-		if (0 == usb_get_extra_descriptor(interface->cur_altsetting,
+		if (0 == usb_get_extra_descriptor(intf->cur_altsetting,
 			0x5f, &desc))
 			total_len = (int) desc[0];
 	}
 
 	if (total_len > 5) {
-		pr_info("vendor descriptor length:%x data:%11ph\n", total_len,
-			desc);
+		dev_info(&intf->dev,
+			 "vendor descriptor length: %d data: %11ph\n",
+			 total_len, desc);
 
 		if ((desc[0] != total_len) || /* descriptor length */
 		    (desc[1] != 0x5f) ||   /* vendor descriptor type */
@@ -1542,7 +1540,8 @@ static int dlfb_parse_vendor_descriptor(struct dlfb_data *dlfb,
 			case 0x0200: { /* max_area */
 				u32 max_area;
 				max_area = le32_to_cpu(*((u32 *)desc));
-				pr_warn("DL chip limited to %d pixel modes\n",
+				dev_warn(&intf->dev,
+					 "DL chip limited to %d pixel modes\n",
 					 max_area);
 				dlfb->sku_pixel_limit = max_area;
 				break;
@@ -1553,14 +1552,15 @@ static int dlfb_parse_vendor_descriptor(struct dlfb_data *dlfb,
 			desc += length;
 		}
 	} else {
-		pr_info("vendor descriptor not available (%d)\n", total_len);
+		dev_info(&intf->dev, "vendor descriptor not available (%d)\n",
+			 total_len);
 	}
 
 	goto success;
 
 unrecognized:
 	/* allow udlfb to load for now even if firmware unrecognized */
-	pr_err("Unrecognized vendor firmware descriptor\n");
+	dev_err(&intf->dev, "Unrecognized vendor firmware descriptor\n");
 
 success:
 	kfree(buf);
@@ -1569,48 +1569,40 @@ static int dlfb_parse_vendor_descriptor(struct dlfb_data *dlfb,
 
 static void dlfb_init_framebuffer_work(struct work_struct *work);
 
-static int dlfb_usb_probe(struct usb_interface *interface,
+static int dlfb_usb_probe(struct usb_interface *intf,
 			  const struct usb_device_id *id)
 {
-	struct usb_device *usbdev;
 	struct dlfb_data *dlfb;
 	int retval = -ENOMEM;
+	struct usb_device *usbdev = interface_to_usbdev(intf);
 
 	/* usb initialization */
-
-	usbdev = interface_to_usbdev(interface);
-
 	dlfb = kzalloc(sizeof(*dlfb), GFP_KERNEL);
-	if (dlfb == NULL) {
-		dev_err(&interface->dev, "dlfb_usb_probe: failed alloc of dev struct\n");
+	if (!dlfb) {
+		dev_err(&intf->dev, "%s: failed to allocate dlfb\n", __func__);
 		goto error;
 	}
 
 	kref_init(&dlfb->kref); /* matching kref_put in usb .disconnect fn */
 
 	dlfb->udev = usbdev;
-	usb_set_intfdata(interface, dlfb);
-
-	pr_info("%s %s - serial #%s\n",
-		usbdev->manufacturer, usbdev->product, usbdev->serial);
-	pr_info("vid_%04x&pid_%04x&rev_%04x driver's dlfb_data struct at %p\n",
-		le16_to_cpu(usbdev->descriptor.idVendor),
-		le16_to_cpu(usbdev->descriptor.idProduct),
-		le16_to_cpu(usbdev->descriptor.bcdDevice), dlfb);
-	pr_info("console enable=%d\n", console);
-	pr_info("fb_defio enable=%d\n", fb_defio);
-	pr_info("shadow enable=%d\n", shadow);
+	usb_set_intfdata(intf, dlfb);
+
+	dev_dbg(&intf->dev, "console enable=%d\n", console);
+	dev_dbg(&intf->dev, "fb_defio enable=%d\n", fb_defio);
+	dev_dbg(&intf->dev, "shadow enable=%d\n", shadow);
 
 	dlfb->sku_pixel_limit = 2048 * 1152; /* default to maximum */
 
-	if (!dlfb_parse_vendor_descriptor(dlfb, interface)) {
-		pr_err("firmware not recognized. Assume incompatible device\n");
+	if (!dlfb_parse_vendor_descriptor(dlfb, intf)) {
+		dev_err(&intf->dev,
+			"firmware not recognized, incompatible device?\n");
 		goto error;
 	}
 
 	if (pixel_limit) {
-		pr_warn("DL chip limit of %d overridden"
-			" by module param to %d\n",
+		dev_warn(&intf->dev,
+			 "DL chip limit of %d overridden to %d\n",
 			 dlfb->sku_pixel_limit, pixel_limit);
 		dlfb->sku_pixel_limit = pixel_limit;
 	}
@@ -1618,7 +1610,7 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 
 	if (!dlfb_alloc_urb_list(dlfb, WRITES_IN_FLIGHT, MAX_TRANSFER)) {
 		retval = -ENOMEM;
-		pr_err("dlfb_alloc_urb_list failed\n");
+		dev_err(&intf->dev, "unable to allocate urb list\n");
 		goto error;
 	}
 
@@ -1646,16 +1638,16 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 
 static void dlfb_init_framebuffer_work(struct work_struct *work)
 {
+	int i, retval;
+	struct fb_info *info;
+	const struct device_attribute *attr;
 	struct dlfb_data *dlfb = container_of(work, struct dlfb_data,
 					     init_framebuffer_work.work);
-	struct fb_info *info;
-	int retval;
-	int i;
 
 	/* allocates framebuffer driver structure, not framebuffer memory */
 	info = framebuffer_alloc(0, &dlfb->udev->dev);
 	if (!info) {
-		pr_err("framebuffer_alloc failed\n");
+		dev_err(&dlfb->udev->dev, "framebuffer_alloc failed\n");
 		goto error;
 	}
 
@@ -1666,7 +1658,7 @@ static void dlfb_init_framebuffer_work(struct work_struct *work)
 
 	retval = fb_alloc_cmap(&info->cmap, 256, 0);
 	if (retval < 0) {
-		pr_err("fb_alloc_cmap failed %x\n", retval);
+		dev_err(info->device, "cmap allocation failed: %d\n", retval);
 		goto error;
 	}
 
@@ -1677,7 +1669,8 @@ static void dlfb_init_framebuffer_work(struct work_struct *work)
 
 	retval = dlfb_setup_modes(dlfb, info, NULL, 0);
 	if (retval != 0) {
-		pr_err("unable to find common mode for display and adapter\n");
+		dev_err(info->device,
+			"unable to find common mode for display and adapter\n");
 		goto error;
 	}
 
@@ -1691,25 +1684,28 @@ static void dlfb_init_framebuffer_work(struct work_struct *work)
 
 	retval = register_framebuffer(info);
 	if (retval < 0) {
-		pr_err("register_framebuffer failed %d\n", retval);
+		dev_err(info->device, "unable to register framebuffer: %d\n",
+			retval);
 		goto error;
 	}
 
 	for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++) {
-		retval = device_create_file(info->dev, &fb_device_attrs[i]);
-		if (retval) {
-			pr_warn("device_create_file failed %d\n", retval);
-		}
+		attr = &fb_device_attrs[i];
+		retval = device_create_file(info->dev, attr);
+		if (retval)
+			dev_warn(info->device,
+				 "failed to create '%s' attribute: %d\n",
+				 attr->attr.name, retval);
 	}
 
 	retval = device_create_bin_file(info->dev, &edid_attr);
-	if (retval) {
-		pr_warn("device_create_bin_file failed %d\n", retval);
-	}
+	if (retval)
+		dev_warn(info->device, "failed to create '%s' attribute: %d\n",
+			 edid_attr.attr.name, retval);
 
-	pr_info("DisplayLink USB device /dev/fb%d attached. %dx%d resolution."
-			" Using %dK framebuffer memory\n", info->node,
-			info->var.xres, info->var.yres,
+	dev_info(info->device,
+		 "%s is DisplayLink USB device (%dx%d, %dK framebuffer memory)\n",
+		 dev_name(info->dev), info->var.xres, info->var.yres,
 		 ((dlfb->backing_buffer) ?
 		 info->fix.smem_len * 2 : info->fix.smem_len) >> 10);
 	return;
@@ -1718,16 +1714,16 @@ static void dlfb_init_framebuffer_work(struct work_struct *work)
 	dlfb_free_framebuffer(dlfb);
 }
 
-static void dlfb_usb_disconnect(struct usb_interface *interface)
+static void dlfb_usb_disconnect(struct usb_interface *intf)
 {
 	struct dlfb_data *dlfb;
 	struct fb_info *info;
 	int i;
 
-	dlfb = usb_get_intfdata(interface);
+	dlfb = usb_get_intfdata(intf);
 	info = dlfb->info;
 
-	pr_info("USB disconnect starting\n");
+	dev_dbg(&intf->dev, "USB disconnect starting\n");
 
 	/* we virtualize until all fb clients release. Then we free */
 	dlfb->virtualized = true;
@@ -1746,7 +1742,7 @@ static void dlfb_usb_disconnect(struct usb_interface *interface)
 		unlink_framebuffer(info);
 	}
 
-	usb_set_intfdata(interface, NULL);
+	usb_set_intfdata(intf, NULL);
 	dlfb->udev = NULL;
 
 	/* if clients still have us open, will be freed on last close */
@@ -1774,15 +1770,21 @@ static void dlfb_urb_completion(struct urb *urb)
 	struct dlfb_data *dlfb = unode->dlfb;
 	unsigned long flags;
 
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
 		/* sync/async unlink faults aren't errors */
-	if (urb->status) {
-		if (!(urb->status == -ENOENT ||
-		    urb->status == -ECONNRESET ||
-		    urb->status == -ESHUTDOWN)) {
-			pr_err("%s - nonzero write bulk status received: %d\n",
+		break;
+	default:
+		dev_err(&dlfb->udev->dev,
+			"%s - nonzero write bulk status received: %d\n",
 			__func__, urb->status);
 		atomic_set(&dlfb->lost_pixels, 1);
-		}
+		break;
 	}
 
 	urb->transfer_buffer_length = dlfb->urbs.size; /* reset to actual */
@@ -1903,7 +1905,8 @@ static struct urb *dlfb_get_urb(struct dlfb_data *dlfb)
 	ret = down_timeout(&dlfb->urbs.limit_sem, GET_URB_TIMEOUT);
 	if (ret) {
 		atomic_set(&dlfb->lost_pixels, 1);
-		pr_warn("wait for urb interrupted: %x available: %d\n",
+		dev_warn(&dlfb->udev->dev,
+			 "wait for urb interrupted: %d available: %d\n",
 			 ret, dlfb->urbs.available);
 		return NULL;
 	}
@@ -1932,7 +1935,7 @@ static int dlfb_submit_urb(struct dlfb_data *dlfb, struct urb *urb, size_t len)
 	if (ret) {
 		dlfb_urb_completion(urb); /* because no one else will */
 		atomic_set(&dlfb->lost_pixels, 1);
-		pr_err("usb_submit_urb error %x\n", ret);
+		dev_err(&dlfb->udev->dev, "submit urb error: %d\n", ret);
 	}
 	return ret;
 }