Commit 591eb85e authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
  [ARM] 3389/1: typo and grammar fix
  [ARM] 3386/1: AT91RM9200 Clock update
  [ARM] 3384/1: AT91RM9200: Timer
  [ARM] 3382/1: ixp2000: unify defconfigs
  [ARM] 3381/1: ixp2000: fix slowport write timing control register fields
  [ARM] 3380/1: ixp2000: simplify ixdp2x00_master_npu() check
  [ARM] 3379/1: ixp2000: use generic 8250 debug macros
  [ARM] 3378/1: ixp2000: fix gpio interrupt handling
  [ARM] Quieten spurious IRQ detection
  [ARM] Use kcalloc to allocate counter_config array rather than kmalloc
  [ARM] Oprofile: dynamically allocate counter_config
  [ARM] Oprofile: Convert semaphore to mutex
  [ARM] 3376/2: S3C2410 - update defconfig
  [ARM] 3375/1: S3C2440 - fix osiris machine build
  [ARM] 3374/1: ep93xx: gpio interrupt support
  [ARM] 3361/1: S3C24XX - add USB bus clock source
  [ARM] 3360/1: S3C2440 - add set rate methods and camera clock
  [ARM] 3359/1: S3C24XX - add support for clk_set_rate
  [ARM] Convert kmalloc+memset to kzalloc
  [ARM] 3373/1: move uengine loader to arch/arm/common
  ...
parents 4658f79b 3a2916aa
......@@ -10,6 +10,8 @@ Introduction
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410 and
the S3C2440 are supported CPUs.
Support for the S3C2400 series is in progress.
Configuration
-------------
......@@ -32,6 +34,11 @@ Machines
A general purpose development board, see EB2410ITX.txt for further
details
Simtec Electronics IM2440D20 (Osiris)
CPU Module from Simtec Electronics, with a S3C2440A CPU, nand flash
and a PCMCIA controller.
Samsung SMDK2410
Samsung's own development board, geared for PDA work.
......@@ -85,6 +92,26 @@ Adding New Machines
mailing list information.
I2C
---
The hardware I2C core in the CPU is supported in single master
mode, and can be configured via platform data.
RTC
---
Support for the onboard RTC unit, including alarm function.
Watchdog
--------
The onchip watchdog is available via the standard watchdog
interface.
NAND
----
......@@ -121,6 +148,15 @@ Clock Management
various clock units
Suspend to RAM
--------------
For boards that provide support for suspend to RAM, the
system can be placed into low power suspend.
See Suspend.txt for more information.
Platform Data
-------------
......@@ -158,6 +194,7 @@ Platform Data
exported outside arch/arm/mach-s3c2410/, or exported to
modules via EXPORT_SYMBOL() and related functions.
Port Contributors
-----------------
......@@ -188,8 +225,11 @@ Document Changes
08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction
08 Mar 2005 - BJD - Added section on adding machines
09 Sep 2005 - BJD - Added section on platform data
11 Feb 2006 - BJD - Added I2C, RTC and Watchdog sections
11 Feb 2006 - BJD - Added Osiris machine, and S3C2400 information
Document Author
---------------
Ben Dooks, (c) 2004-2005 Simtec Electronics
Ben Dooks, (c) 2004-2005,2006 Simtec Electronics
......@@ -108,6 +108,13 @@ config ARCH_EBSA110
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
config ARCH_EP93XX
bool "EP93xx-based"
select ARM_AMBA
select ARM_VIC
help
This enables support for the Cirrus EP93xx series of CPUs.
config ARCH_FOOTBRIDGE
bool "FootBridge"
select FOOTBRIDGE
......@@ -250,6 +257,8 @@ endchoice
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-ep93xx/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
......@@ -434,6 +443,13 @@ config NO_IDLE_HZ
Currently at least OMAP, PXA2xx and SA11x0 platforms are known
to have accurate timekeeping with dynamic tick.
config HZ
int
default 128 if ARCH_L7200
default 200 if ARCH_EBSA110 || ARCH_S3C2410
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default 100
config AEABI
bool "Use the ARM EABI to compile the kernel"
help
......
......@@ -105,6 +105,7 @@ endif
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
......
......@@ -15,3 +15,4 @@ obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
obj-$(CONFIG_ARCH_IXP2000) += uengine.o
......@@ -5,7 +5,7 @@
* limited DMA windows. These functions utilize bounce buffers to
* copy data to/from buffers located outside the DMA region. This
* only works for systems in which DMA memory is at the bottom of
* RAM and the remainder of memory is at the top an the DMA memory
* RAM, the remainder of memory is at the top and the DMA memory
* can be marked as ZONE_DMA. Anything beyond that such as discontigous
* DMA windows will require custom implementations that reserve memory
* areas at early bootup.
......
......@@ -60,7 +60,7 @@ struct locomo {
unsigned long phys;
unsigned int irq;
spinlock_t lock;
void *base;
void __iomem *base;
};
struct locomo_dev_info {
......@@ -162,7 +162,7 @@ static void locomo_handler(unsigned int irq, struct irqdesc *desc,
{
int req, i;
struct irqdesc *d;
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
/* Acknowledge the parent IRQ */
desc->chip->ack(irq);
......@@ -189,7 +189,7 @@ static void locomo_ack_irq(unsigned int irq)
static void locomo_mask_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_ICR);
r &= ~(0x0010 << (irq - LOCOMO_IRQ_START));
......@@ -198,7 +198,7 @@ static void locomo_mask_irq(unsigned int irq)
static void locomo_unmask_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_ICR);
r |= (0x0010 << (irq - LOCOMO_IRQ_START));
......@@ -215,7 +215,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc,
struct pt_regs *regs)
{
struct irqdesc *d;
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
d = irq_desc + LOCOMO_IRQ_KEY_START;
......@@ -225,7 +225,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc,
static void locomo_key_ack_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START));
......@@ -234,7 +234,7 @@ static void locomo_key_ack_irq(unsigned int irq)
static void locomo_key_mask_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START));
......@@ -243,7 +243,7 @@ static void locomo_key_mask_irq(unsigned int irq)
static void locomo_key_unmask_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START));
......@@ -261,7 +261,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc,
{
int req, i;
struct irqdesc *d;
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
req = locomo_readl(mapbase + LOCOMO_GIR) &
locomo_readl(mapbase + LOCOMO_GPD) &
......@@ -280,7 +280,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc,
static void locomo_gpio_ack_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_GWE);
r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
......@@ -297,7 +297,7 @@ static void locomo_gpio_ack_irq(unsigned int irq)
static void locomo_gpio_mask_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_GIE);
r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
......@@ -306,7 +306,7 @@ static void locomo_gpio_mask_irq(unsigned int irq)
static void locomo_gpio_unmask_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_GIE);
r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
......@@ -323,7 +323,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc,
struct pt_regs *regs)
{
struct irqdesc *d;
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
d = irq_desc + LOCOMO_IRQ_LT_START;
......@@ -333,7 +333,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc,
static void locomo_lt_ack_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_LTINT);
r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START));
......@@ -342,7 +342,7 @@ static void locomo_lt_ack_irq(unsigned int irq)
static void locomo_lt_mask_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_LTINT);
r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START));
......@@ -351,7 +351,7 @@ static void locomo_lt_mask_irq(unsigned int irq)
static void locomo_lt_unmask_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_LTINT);
r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START));
......@@ -369,7 +369,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc,
{
int req, i;
struct irqdesc *d;
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
req = locomo_readl(mapbase + LOCOMO_SPIIR) & 0x000F;
if (req) {
......@@ -386,7 +386,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc,
static void locomo_spi_ack_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_SPIWE);
r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
......@@ -403,7 +403,7 @@ static void locomo_spi_ack_irq(unsigned int irq)
static void locomo_spi_mask_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_SPIIE);
r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
......@@ -412,7 +412,7 @@ static void locomo_spi_mask_irq(unsigned int irq)
static void locomo_spi_unmask_irq(unsigned int irq)
{
void *mapbase = get_irq_chipdata(irq);
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_SPIIE);
r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
......@@ -428,7 +428,7 @@ static struct irqchip locomo_spi_chip = {
static void locomo_setup_irq(struct locomo *lchip)
{
int irq;
void *irqbase = lchip->base;
void __iomem *irqbase = lchip->base;
/*
* Install handler for IRQ_LOCOMO_HW.
......@@ -501,12 +501,11 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
struct locomo_dev *dev;
int ret;
dev = kmalloc(sizeof(struct locomo_dev), GFP_KERNEL);
dev = kzalloc(sizeof(struct locomo_dev), GFP_KERNEL);
if (!dev) {
ret = -ENOMEM;
goto out;
}
memset(dev, 0, sizeof(struct locomo_dev));
strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id));
/*
......@@ -664,12 +663,10 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
unsigned long r;
int i, ret = -ENODEV;
lchip = kmalloc(sizeof(struct locomo), GFP_KERNEL);
lchip = kzalloc(sizeof(struct locomo), GFP_KERNEL);
if (!lchip)
return -ENOMEM;
memset(lchip, 0, sizeof(struct locomo));
spin_lock_init(&lchip->lock);
lchip->dev = me;
......
......@@ -26,6 +26,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
......@@ -36,10 +37,6 @@
#include <asm/hardware/sa1111.h>
#ifdef CONFIG_ARCH_PXA
#include <asm/arch/pxa-regs.h>
#endif
extern void __init sa1110_mb_enable(void);
/*
......@@ -51,6 +48,7 @@ extern void __init sa1110_mb_enable(void);
*/
struct sa1111 {
struct device *dev;
struct clk *clk;
unsigned long phys;
int irq;
spinlock_t lock;
......@@ -451,19 +449,7 @@ static void sa1111_wake(struct sa1111 *sachip)
spin_lock_irqsave(&sachip->lock, flags);
#ifdef CONFIG_ARCH_SA1100
/*
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
* (SA-1110 Developer's Manual, section 9.1.2.1)
*/
GAFR |= GPIO_32_768kHz;
GPDR |= GPIO_32_768kHz;
TUCR = TUCR_3_6864MHz;
#elif CONFIG_ARCH_PXA
pxa_gpio_mode(GPIO11_3_6MHz_MD);
#else
#error missing clock setup
#endif
clk_enable(sachip->clk);
/*
* Turn VCO on, and disable PLL Bypass.
......@@ -555,12 +541,11 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
struct sa1111_dev *dev;
int ret;
dev = kmalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
if (!dev) {
ret = -ENOMEM;
goto out;
}
memset(dev, 0, sizeof(struct sa1111_dev));
snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
"%4.4lx", info->offset);
......@@ -635,11 +620,15 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
unsigned int has_devs, val;
int i, ret = -ENODEV;
sachip = kmalloc(sizeof(struct sa1111), GFP_KERNEL);
sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
if (!sachip)
return -ENOMEM;
memset(sachip, 0, sizeof(struct sa1111));
sachip->clk = clk_get(me, "GPIO27_CLK");
if (!sachip->clk) {
ret = PTR_ERR(sachip->clk);
goto err_free;
}
spin_lock_init(&sachip->lock);
......@@ -656,7 +645,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
if (!sachip->base) {
ret = -ENOMEM;
goto out;
goto err_clkput;
}
/*
......@@ -666,7 +655,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
ret = -ENODEV;
goto unmap;
goto err_unmap;
}
printk(KERN_INFO "SA1111 Microprocessor Companion Chip: "
......@@ -726,9 +715,11 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
return 0;
unmap:
err_unmap:
iounmap(sachip->base);
out:
err_clkput:
clk_put(sachip->clk);
err_free:
kfree(sachip);
return ret;
}
......@@ -751,6 +742,8 @@ static void __sa1111_remove(struct sa1111 *sachip)
sa1111_writel(0, irqbase + SA1111_WAKEEN0);
sa1111_writel(0, irqbase + SA1111_WAKEEN1);
clk_disable(sachip->clk);
if (sachip->irq != NO_IRQ) {
set_irq_chained_handler(sachip->irq, NULL);
set_irq_data(sachip->irq, NULL);
......@@ -759,6 +752,7 @@ static void __sa1111_remove(struct sa1111 *sachip)
}
iounmap(sachip->base);
clk_put(sachip->clk);
kfree(sachip);
}
......@@ -857,6 +851,8 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
sa1111_writel(0, sachip->base + SA1111_SKPWM0);
sa1111_writel(0, sachip->base + SA1111_SKPWM1);
clk_disable(sachip->clk);
spin_unlock_irqrestore(&sachip->lock, flags);
return 0;
......
......@@ -132,12 +132,10 @@ int __init scoop_probe(struct platform_device *pdev)
if (!mem)
return -EINVAL;
devptr = kmalloc(sizeof(struct scoop_dev), GFP_KERNEL);
devptr = kzalloc(sizeof(struct scoop_dev), GFP_KERNEL);
if (!devptr)
return -ENOMEM;
memset(devptr, 0, sizeof(struct scoop_dev));
spin_lock_init(&devptr->scoop_lock);
inf = pdev->dev.platform_data;
......
......@@ -19,7 +19,7 @@
#include <linux/string.h>
#include <asm/hardware.h>
#include <asm/arch/ixp2000-regs.h>
#include <asm/arch/uengine.h>
#include <asm/hardware/uengine.h>
#include <asm/io.h>
#define USTORE_ADDRESS 0x000
......
......@@ -22,22 +22,21 @@
#include <linux/list.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
static void __iomem *vic_base;
static void vic_mask_irq(unsigned int irq)
{
irq -= IRQ_VIC_START;
writel(1 << irq, vic_base + VIC_INT_ENABLE_CLEAR);
void __iomem *base = get_irq_chipdata(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
}
static void vic_unmask_irq(unsigned int irq)
{
irq -= IRQ_VIC_START;
writel(1 << irq, vic_base + VIC_INT_ENABLE);
void __iomem *base = get_irq_chipdata(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE);
}
static struct irqchip vic_chip = {
......@@ -46,43 +45,49 @@ static struct irqchip vic_chip = {
.unmask = vic_unmask_irq,
};
void __init vic_init(void __iomem *base, u32 vic_sources)
/**
* vic_init - initialise a vectored interrupt controller
* @base: iomem base address
* @irq_start: starting interrupt number, must be muliple of 32
* @vic_sources: bitmask of interrupt sources to allow
*/
void __init vic_init(void __iomem *base, unsigned int irq_start,
u32 vic_sources)
{
unsigned int i;
vic_base = base;
/* Disable all interrupts initially. */
writel(0, vic_base + VIC_INT_SELECT);
writel(0, vic_base + VIC_INT_ENABLE);
writel(~0, vic_base + VIC_INT_ENABLE_CLEAR);
writel(0, vic_base + VIC_IRQ_STATUS);
writel(0, vic_base + VIC_ITCR);
writel(~0, vic_base + VIC_INT_SOFT_CLEAR);
writel(0, base + VIC_INT_SELECT);
writel(0, base + VIC_INT_ENABLE);
writel(~0, base + VIC_INT_ENABLE_CLEAR);
writel(0, base + VIC_IRQ_STATUS);
writel(0, base + VIC_ITCR);
writel(~0, base + VIC_INT_SOFT_CLEAR);
/*
* Make sure we clear all existing interrupts
*/
writel(0, vic_base + VIC_VECT_ADDR);
writel(0, base + VIC_VECT_ADDR);
for (i = 0; i < 19; i++) {
unsigned int value;
value = readl(vic_base + VIC_VECT_ADDR);
writel(value, vic_base + VIC_VECT_ADDR);
value = readl(base + VIC_VECT_ADDR);
writel(value, base + VIC_VECT_ADDR);
}
for (i = 0; i < 16; i++) {
void __iomem *reg = vic_base + VIC_VECT_CNTL0 + (i * 4);
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(VIC_VECT_CNTL_ENABLE | i, reg);
}
writel(32, vic_base + VIC_DEF_VECT_ADDR);
writel(32, base + VIC_DEF_VECT_ADDR);
for (i = 0; i < 32; i++) {
unsigned int irq = IRQ_VIC_START + i;
unsigned int irq = irq_start + i;
set_irq_chip(irq, &vic_chip);
set_irq_chipdata(irq, base);
if (vic_sources & (1 << i)) {
set_irq_handler(irq, do_level_IRQ);
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:12:48 2005
# Linux kernel version: 2.6.16
# Mon Mar 20 14:54:51 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
......@@ -13,7 +12,6 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
......@@ -25,38 +23,42 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
......@@ -70,14 +72,14 @@ CONFIG_KMOD=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_DEFAULT_IOSCHED="deadline"
#
# System Type
......@@ -86,11 +88,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
CONFIG_ARCH_EP93XX=y
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
......@@ -104,46 +107,44 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
# CONFIG_ARCH_AT91RM9200 is not set
#
# Intel IXP2400/2800 Implementation Options
# Cirrus EP93xx Implementation Options
#
CONFIG_CRUNCH=y
#
# IXP2400/2800 Platforms
# EP93xx Platforms
#
CONFIG_ARCH_ENP2611=y
# CONFIG_ARCH_IXDP2400 is not set
# CONFIG_ARCH_IXDP2800 is not set
# CONFIG_ARCH_IXDP2401 is not set
# CONFIG_ARCH_IXDP2801 is not set
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
CONFIG_MACH_GESBC9312=y
CONFIG_MACH_TS72XX=y
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_ARM920T=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_XSCALE_PMU=y
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
CONFIG_ARM_VIC=y
#
# Bus support
#
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ARM_AMBA=y
#
# PCCARD (PCMCIA/CardBus) support
......@@ -155,6 +156,8 @@ CONFIG_PCI_LEGACY_PROC=y
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
......@@ -171,7 +174,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
# CONFIG_XIP_KERNEL is not set
#
......@@ -197,6 +200,7 @@ CONFIG_BINFMT_ELF=y
# Power management options
#
# CONFIG_PM is not set
# CONFIG_APM is not set
#
# Networking
......@@ -206,10 +210,13 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
......@@ -242,6 +249,11 @@ CONFIG_TCP_CONG_BIC=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
......@@ -259,7 +271,6 @@ CONFIG_TCP_CONG_BIC=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -278,21 +289,26 @@ CONFIG_TCP_CONG_BIC=y
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
......@@ -312,7 +328,11 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
......@@ -323,29 +343,31 @@ CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_AMDSTD_RETRY=0
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_XIP is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
......@@ -362,7 +384,11 @@ CONFIG_MTD_IXP2000=y
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
#
# OneNAND Flash Device Drivers
......@@ -381,19 +407,12 @@ CONFIG_MTD_IXP2000=y
#
# Block devices
#
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
......@@ -401,7 +420,40 @@ CONFIG_BLK_DEV_INITRD=y
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
......@@ -416,27 +468,20 @@ CONFIG_BLK_DEV_INITRD=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
......@@ -447,66 +492,20 @@ CONFIG_DUMMY=y
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
......@@ -516,29 +515,7 @@ CONFIG_EEPRO100=y
#
# Wan interfaces
#
CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300 is not set
# CONFIG_FARSYNC is not set
CONFIG_DLCI=y
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
......@@ -554,28 +531,7 @@ CONFIG_DLCI_MAX=8
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_INPUT is not set
#
# Hardware I/O ports
......@@ -592,20 +548,18 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
......@@ -622,23 +576,19 @@ CONFIG_WATCHDOG=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_IXP2000_WATCHDOG=y
#
# PCI-based Watchdog Cards
# USB-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
......@@ -663,27 +613,8 @@ CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
......@@ -691,17 +622,28 @@ CONFIG_I2C_IXP2000=y
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
......@@ -716,6 +658,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
......@@ -733,10 +676,8 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
......@@ -776,13 +717,143 @@ CONFIG_HWMON=y
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
......@@ -797,21 +868,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
......@@ -830,8 +897,11 @@ CONFIG_DNOTIFY=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
......@@ -843,6 +913,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
......@@ -911,12 +982,52 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
......@@ -927,13 +1038,14 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
......@@ -941,9 +1053,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_WAITQ=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
......@@ -969,6 +1082,6 @@ CONFIG_DEBUG_LL=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:14:50 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
# Intel IXP2400/2800 Implementation Options
#
#
# IXP2400/2800 Platforms
#
# CONFIG_ARCH_ENP2611 is not set
# CONFIG_ARCH_IXDP2400 is not set
# CONFIG_ARCH_IXDP2800 is not set
CONFIG_ARCH_IXDP2401=y
# CONFIG_ARCH_IXDP2801 is not set
CONFIG_ARCH_IXDP2X01=y
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_XSCALE_PMU=y
#
# Bus support
#
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_CS89x0=y
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300 is not set
# CONFIG_FARSYNC is not set
CONFIG_DLCI=y
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=3
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_IXP2000_WATCHDOG=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:14:56 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
# Intel IXP2400/2800 Implementation Options
#
#
# IXP2400/2800 Platforms
#
# CONFIG_ARCH_ENP2611 is not set
# CONFIG_ARCH_IXDP2400 is not set
CONFIG_ARCH_IXDP2800=y
CONFIG_ARCH_IXDP2X00=y
# CONFIG_ARCH_IXDP2401 is not set
# CONFIG_ARCH_IXDP2801 is not set
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_XSCALE_PMU=y
#
# Bus support
#
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300 is not set
# CONFIG_FARSYNC is not set
CONFIG_DLCI=y
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_IXP2000_WATCHDOG=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:15:03 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
# Intel IXP2400/2800 Implementation Options
#
#
# IXP2400/2800 Platforms
#
# CONFIG_ARCH_ENP2611 is not set
# CONFIG_ARCH_IXDP2400 is not set
# CONFIG_ARCH_IXDP2800 is not set
# CONFIG_ARCH_IXDP2401 is not set
CONFIG_ARCH_IXDP2801=y
CONFIG_ARCH_IXDP2X01=y
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_XSCALE_PMU=y
#
# Bus support
#
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_CS89x0=y
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300 is not set
# CONFIG_FARSYNC is not set
CONFIG_DLCI=y
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=3
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_IXP2000_WATCHDOG=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-git13
# Thu Nov 10 15:14:13 2005
# Linux kernel version: 2.6.16-rc2
# Wed Feb 8 04:49:11 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
......@@ -29,27 +28,31 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
......@@ -104,6 +107,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
......@@ -113,12 +117,13 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
# IXP2400/2800 Platforms
#
# CONFIG_ARCH_ENP2611 is not set
CONFIG_ARCH_ENP2611=y
CONFIG_ARCH_IXDP2400=y
# CONFIG_ARCH_IXDP2800 is not set
CONFIG_ARCH_IXDP2800=y
CONFIG_ARCH_IXDP2X00=y
# CONFIG_ARCH_IXDP2401 is not set
# CONFIG_ARCH_IXDP2801 is not set
CONFIG_ARCH_IXDP2401=y
CONFIG_ARCH_IXDP2801=y
CONFIG_ARCH_IXDP2X01=y
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
#
......@@ -141,7 +146,6 @@ CONFIG_XSCALE_PMU=y
#
# Bus support
#
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
......@@ -156,6 +160,7 @@ CONFIG_PCI_LEGACY_PROC=y
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
......@@ -198,6 +203,7 @@ CONFIG_BINFMT_ELF=y
# Power management options
#
# CONFIG_PM is not set
# CONFIG_APM is not set
#
# Networking
......@@ -243,6 +249,11 @@ CONFIG_TCP_CONG_BIC=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
......@@ -260,7 +271,6 @@ CONFIG_TCP_CONG_BIC=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -283,6 +293,11 @@ CONFIG_STANDALONE=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
......@@ -331,6 +346,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
# CONFIG_MTD_XIP is not set
#
......@@ -466,6 +482,7 @@ CONFIG_NET_PCI=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_CS89x0=y
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
......@@ -486,12 +503,14 @@ CONFIG_EEPRO100=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
CONFIG_ENP2611_MSF_NET=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
......@@ -595,7 +614,8 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_NR_UARTS=3
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
......@@ -603,7 +623,6 @@ CONFIG_SERIAL_8250_NR_UARTS=1
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
......@@ -704,6 +723,12 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Hardware Monitoring support
#
......@@ -738,6 +763,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
......@@ -813,6 +839,7 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
......@@ -844,6 +871,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
......@@ -912,6 +940,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
......@@ -928,12 +957,13 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
......@@ -942,6 +972,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc2
# Mon Feb 6 11:17:23 2006
# Linux kernel version: 2.6.16
# Mon Mar 20 20:36:02 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
......@@ -12,7 +12,6 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
......@@ -87,6 +86,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......@@ -111,6 +111,7 @@ CONFIG_ARCH_S3C2410=y
# S3C24XX Implementations
#
CONFIG_MACH_ANUBIS=y
CONFIG_MACH_OSIRIS=y
CONFIG_ARCH_BAST=y
CONFIG_BAST_PC104_IRQ=y
CONFIG_ARCH_H1940=y
......@@ -175,6 +176,7 @@ CONFIG_ISA=y
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=200
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
......@@ -230,6 +232,7 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
......@@ -364,7 +367,6 @@ CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
......@@ -431,6 +433,7 @@ CONFIG_PARPORT_1284=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
......@@ -623,7 +626,6 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
......@@ -686,6 +688,11 @@ CONFIG_S3C2410_WATCHDOG=y
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_S3C2410_RTC=y
......@@ -750,6 +757,11 @@ CONFIG_SENSORS_EEPROM=m
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
......@@ -763,6 +775,7 @@ CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
......@@ -850,16 +863,138 @@ CONFIG_FONT_8x16=y
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
#
# MMC/SD Card support
......
......@@ -357,10 +357,8 @@ static int apm_open(struct inode * inode, struct file * filp)
{
struct apm_user *as;
as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL);
as = (struct apm_user *)kzalloc(sizeof(*as), GFP_KERNEL);
if (as) {
memset(as, 0, sizeof(*as));
/*
* XXX - this is a tiny bit broken, when we consider BSD
* process accounting. If the device is opened by root, we
......
......@@ -540,12 +540,10 @@ static void __init pcibios_init_hw(struct hw_pci *hw)
int nr, busnr;
for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
sys = kmalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
if (!sys)
panic("PCI: unable to allocate sys data!");
memset(sys, 0, sizeof(struct pci_sys_data));
sys->hw = hw;
sys->busnr = busnr;
sys->swizzle = hw->swizzle;
......
......@@ -11,7 +11,6 @@
*/
#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/hardware.h>
.text
......
......@@ -807,14 +807,12 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
unsigned long base;
int i;
ec = kmalloc(sizeof(ecard_t), GFP_KERNEL);
ec = kzalloc(sizeof(ecard_t), GFP_KERNEL);
if (!ec) {
ec = ERR_PTR(-ENOMEM);
goto nomem;
}
memset(ec, 0, sizeof(ecard_t));
ec->slot_no = slot;
ec->type = type;
ec->irq = NO_IRQ;
......
......@@ -484,7 +484,6 @@ call_fpe:
movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1)
bcs iwmmxt_task_enable
#endif
enable_irq
add pc, pc, r8, lsr #6
mov r0, r0
......@@ -511,6 +510,7 @@ call_fpe:
mov pc, lr @ CP#15 (Control)
do_fpe:
enable_irq
ldr r4, .LCfp
add r10, r10, #TI_FPSTATE @ r10 = workspace
ldr pc, [r4] @ Call FP module USR entry point
......
......@@ -28,10 +28,9 @@
#define PROCINFO_INITFUNC 12
#define MACHINFO_TYPE 0
#define MACHINFO_PHYSRAM 4
#define MACHINFO_PHYSIO 8
#define MACHINFO_PGOFFIO 12
#define MACHINFO_NAME 16
#define MACHINFO_PHYSIO 4
#define MACHINFO_PGOFFIO 8
#define MACHINFO_NAME 12
#define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET)
......
......@@ -305,14 +305,19 @@ report_bad_irq(unsigned int irq, struct pt_regs *regs, struct irqdesc *desc, int
static int count = 100;
struct irqaction *action;
if (!count || noirqdebug)
if (noirqdebug)
return;
count--;
if (ret != IRQ_HANDLED && ret != IRQ_NONE) {
if (!count)
return;
count--;
printk("irq%u: bogus retval mask %x\n", irq, ret);
} else {
desc->irqs_unhandled++;
if (desc->irqs_unhandled <= 99900)
return;
desc->irqs_unhandled = 0;
printk("irq%u: nobody cared\n", irq);
}
show_regs(regs);
......
......@@ -9,28 +9,32 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/param.h>
.text
.LC0: .word loops_per_jiffy
.LC1: .word (2199023*HZ)>>11
/*
* 0 <= r0 <= 2000
* r0 <= 2000
* lpj <= 0x01ffffff (max. 3355 bogomips)
* HZ <= 1000
*/
ENTRY(__udelay)
mov r2, #0x6800
orr r2, r2, #0x00db
ldr r2, .LC1
mul r0, r2, r0
ENTRY(__const_udelay) @ 0 <= r0 <= 0x01ffffff
ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06
ldr r2, .LC0
ldr r2, [r2] @ max = 0x0fffffff
mov r0, r0, lsr #11 @ max = 0x00003fff
mov r2, r2, lsr #11 @ max = 0x0003ffff
ldr r2, [r2] @ max = 0x01ffffff
mov r0, r0, lsr #14 @ max = 0x0001ffff
mov r2, r2, lsr #10 @ max = 0x00007fff
mul r0, r2, r0 @ max = 2^32-1
movs r0, r0, lsr #6
RETINSTR(moveq,pc,lr)
/*
* loops = (r0 * 0x10c6 * 100 * loops_per_jiffy) / 2^32
* loops = r0 * HZ * loops_per_jiffy / 1000000
*
* Oh, if only we had a cycle counter...
*/
......
......@@ -12,7 +12,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/hardware.h>
.text
.align
......
......@@ -201,6 +201,54 @@ static struct clk ohci_clk = {
.pmc_mask = 1 << AT91_ID_UHP,
.mode = pmc_periph_mode,
};
static struct clk ether_clk = {
.name = "ether_clk",
.parent = &mck,
.pmc_mask = 1 << AT91_ID_EMAC,
.mode = pmc_periph_mode,
};
static struct clk mmc_clk = {
.name = "mci_clk",
.parent = &mck,
.pmc_mask = 1 << AT91_ID_MCI,
.mode = pmc_periph_mode,
};
static struct clk twi_clk = {
.name = "twi_clk",
.parent = &mck,
.pmc_mask = 1 << AT91_ID_TWI,
.mode = pmc_periph_mode,
};
static struct clk usart0_clk = {
.name = "usart0_clk",
.parent = &mck,
.pmc_mask = 1 << AT91_ID_US0,
.mode = pmc_periph_mode,
};
static struct clk usart1_clk = {
.name = "usart1_clk",
.parent = &mck,
.pmc_mask = 1 << AT91_ID_US1,
.mode = pmc_periph_mode,
};
static struct clk usart2_clk = {
.name = "usart2_clk",
.parent = &mck,
.pmc_mask = 1 << AT91_ID_US2,
.mode = pmc_periph_mode,
};
static struct clk usart3_clk = {
.name = "usart3_clk",
.parent = &mck,
.pmc_mask = 1 << AT91_ID_US3,
.mode = pmc_periph_mode,
};
static struct clk spi_clk = {
.name = "spi0_clk",
.parent = &mck,
.pmc_mask = 1 << AT91_ID_SPI,
.mode = pmc_periph_mode,
};
static struct clk *const clock_list[] = {
/* four primary clocks -- MUST BE FIRST! */
......@@ -223,15 +271,18 @@ static struct clk *const clock_list[] = {
/* MCK and peripherals */
&mck,
// usart0..usart3
// mmc
&usart0_clk,
&usart1_clk,
&usart2_clk,
&usart3_clk,
&mmc_clk,
&udc_clk,
// i2c
// spi
&twi_clk,
&spi_clk,
// ssc0..ssc2
// tc0..tc5
&ohci_clk,
// ether
&ether_clk,
};
......@@ -360,7 +411,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
u32 pckr;
pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
pckr &= 0x03;
pckr &= AT91_PMC_CSS_PLLB; /* clock selection */
pckr |= prescale << 2;
at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
clk->rate_hz = actual;
......@@ -440,7 +491,7 @@ static int at91_clk_show(struct seq_file *s, void *unused)
else
state = "";
seq_printf(s, "%-10s users=%d %-3s %9ld Hz %s\n",
seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
clk->name, clk->users, state, clk_get_rate(clk),
clk->parent ? clk->parent->name : "");
}
......@@ -483,8 +534,15 @@ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
freq *= mul + 1;
} else
freq = 0;
if (pll == &pllb && (reg & (1 << 28)))
freq /= 2;
return freq;
}
static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg)
{
if (pll == &pllb && (reg & AT91_PMC_USB96M))
return freq / 2;
else
return freq;
}
......@@ -550,8 +608,8 @@ int __init at91_clock_init(unsigned long main_clock)
if (!main_clock) {
do {
tmp = at91_sys_read(AT91_CKGR_MCFR);
} while (!(tmp & 0x10000));
main_clock = (tmp & 0xffff) * (AT91_SLOW_CLOCK / 16);
} while (!(tmp & AT91_PMC_MAINRDY));
main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
}
main_clk.rate_hz = main_clock;
......@@ -566,13 +624,16 @@ int __init at91_clock_init(unsigned long main_clock)
*
* REVISIT: assumes MCK doesn't derive from PLLB!
*/
at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | 0x10000000;
at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
at91_sys_write(AT91_PMC_PCDR, (1 << AT91_ID_UHP) | (1 << AT91_ID_UDP));
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP);
at91_sys_write(AT91_CKGR_PLLBR, 0);
at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP);
udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
/*
* MCK and CPU derive from one of those primary clocks.
* For now, assume this parentage won't change.
......
......@@ -261,7 +261,7 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
void __iomem *pio;
u32 isr;
pio = (void __force __iomem *) desc->chipdata;
pio = desc->base;
/* temporarily mask (level sensitive) parent IRQ */
desc->chip->ack(irq);
......@@ -312,7 +312,7 @@ void __init at91_gpio_irq_setup(unsigned banks)
__raw_writel(~0, controller + PIO_IDR);
set_irq_data(id, (void *) pin);
set_irq_chipdata(id, (void __force *) controller);
set_irq_chipdata(id, controller);
for (i = 0; i < 32; i++, pin++) {
set_irq_chip(pin, &gpio_irqchip);
......
......@@ -71,11 +71,11 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_r
if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */
write_seqlock(&xtime_lock);
do {
while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH) {
timer_tick(regs);
rtar = (at91_sys_read(AT91_ST_RTAR) + LATCH) & AT91_ST_ALMV;
at91_sys_write(AT91_ST_RTAR, rtar);
} while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH);
}
write_sequnlock(&xtime_lock);
......
if ARCH_EP93XX
menu "Cirrus EP93xx Implementation Options"
comment "EP93xx Platforms"
config MACH_GESBC9312
bool "Support Glomation GESBC-9312-sx"
help
Say 'Y' here if you want your kernel to support the Glomation
GESBC-9312-sx board.
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
help
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
endmenu
endif
#
# Makefile for the linux kernel.
#
obj-y := core.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
/*
* arch/arm/mach-ep93xx/core.c
* Core routines for Cirrus EP93xx chips.
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* Thanks go to Michael Burian and Ray Lehtiniemi for their key
* role in the ep93xx linux community.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
#include <linux/mm.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/delay.h>
#include <linux/amba/bus.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
#include <asm/pgtable.h>
#include <asm/io.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/arch/gpio.h>
#include <asm/hardware/vic.h>
/*************************************************************************
* Static I/O mappings that are needed for all EP93xx platforms
*************************************************************************/
static struct map_desc ep93xx_io_desc[] __initdata = {
{
.virtual = EP93XX_AHB_VIRT_BASE,
.pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
.length = EP93XX_AHB_SIZE,
.type = MT_DEVICE,
}, {
.virtual = EP93XX_APB_VIRT_BASE,
.pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE),
.length = EP93XX_APB_SIZE,
.type = MT_DEVICE,
},
};
void __init ep93xx_map_io(void)
{
iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
}
/*************************************************************************
* Timer handling for EP93xx
*************************************************************************
* The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and
* 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
* an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz,
* is free-running, and can't generate interrupts.
*
* The 508 kHz timers are ideal for use for the timer interrupt, as the
* most common values of HZ divide 508 kHz nicely. We pick one of the 16
* bit timers (timer 1) since we don't need more than 16 bits of reload
* value as long as HZ >= 8.
*
* The higher clock rate of timer 4 makes it a better choice than the
* other timers for use in gettimeoffset(), while the fact that it can't
* generate interrupts means we don't have to worry about not being able
* to use this timer for something else. We also use timer 4 for keeping
* track of lost jiffies.
*/
static unsigned int last_jiffy_time;
#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
static int ep93xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
write_seqlock(&xtime_lock);
__raw_writel(1, EP93XX_TIMER1_CLEAR);
while (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time
>= TIMER4_TICKS_PER_JIFFY) {
last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
timer_tick(regs);
}
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
static struct irqaction ep93xx_timer_irq = {
.name = "ep93xx timer",
.flags = SA_INTERRUPT | SA_TIMER,
.handler = ep93xx_timer_interrupt,
};
static void __init ep93xx_timer_init(void)
{
/* Enable periodic HZ timer. */
__raw_writel(0x48, EP93XX_TIMER1_CONTROL);
__raw_writel((508000 / HZ) - 1, EP93XX_TIMER1_LOAD);
__raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
/* Enable lost jiffy timer. */
__raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
}
static unsigned long ep93xx_gettimeoffset(void)
{
int offset;
offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
/* Calculate (1000000 / 983040) * offset. */
return offset + (53 * offset / 3072);
}
struct sys_timer ep93xx_timer = {
.init = ep93xx_timer_init,
.offset = ep93xx_gettimeoffset,
};
/*************************************************************************
* GPIO handling for EP93xx
*************************************************************************/
static unsigned char gpio_int_enable[2];
static unsigned char gpio_int_type1[2];
static unsigned char gpio_int_type2[2];
static void update_gpio_ab_int_params(int port)
{
if (port == 0) {
__raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
__raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
__raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
__raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
} else if (port == 1) {
__raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
__raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
__raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
__raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
}
}
static unsigned char data_register_offset[8] = {
0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40,
};
static unsigned char data_direction_register_offset[8] = {
0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44,
};
void gpio_line_config(int line, int direction)
{
unsigned int data_direction_register;
unsigned long flags;
unsigned char v;
data_direction_register =
EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]);
local_irq_save(flags);
if (direction == GPIO_OUT) {
if (line >= 0 && line < 16) {
gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
update_gpio_ab_int_params(line >> 3);
}
v = __raw_readb(data_direction_register);
v |= 1 << (line & 7);
__raw_writeb(v, data_direction_register);
} else if (direction == GPIO_IN) {
v = __raw_readb(data_direction_register);
v &= ~(1 << (line & 7));
__raw_writeb(v, data_direction_register);
}
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_line_config);
int gpio_line_get(int line)
{
unsigned int data_register;
data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
return !!(__raw_readb(data_register) & (1 << (line & 7)));
}
EXPORT_SYMBOL(gpio_line_get);
void gpio_line_set(int line, int value)
{
unsigned int data_register;
unsigned long flags;
unsigned char v;
data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
local_irq_save(flags);
if (value == EP93XX_GPIO_HIGH) {
v = __raw_readb(data_register);
v |= 1 << (line & 7);
__raw_writeb(v, data_register);
} else if (value == EP93XX_GPIO_LOW) {
v = __raw_readb(data_register);
v &= ~(1 << (line & 7));
__raw_writeb(v, data_register);
}
local_irq_restore(flags);
}
EXPORT_SYMBOL(gpio_line_set);
/*************************************************************************
* EP93xx IRQ handling
*************************************************************************/
static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
struct irqdesc *desc, struct pt_regs *regs)
{
unsigned char status;
int i;
status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
desc = irq_desc + IRQ_EP93XX_GPIO(0) + i;
desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc, regs);
}
}
status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
desc = irq_desc + IRQ_EP93XX_GPIO(8) + i;
desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc, regs);
}
}
}
static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq)
{
int line = irq - IRQ_EP93XX_GPIO(0);
int port = line >> 3;
gpio_int_enable[port] &= ~(1 << (line & 7));
update_gpio_ab_int_params(port);
if (line >> 3) {
__raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
} else {
__raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
}
}
static void ep93xx_gpio_ab_irq_mask(unsigned int irq)
{
int line = irq - IRQ_EP93XX_GPIO(0);
int port = line >> 3;
gpio_int_enable[port] &= ~(1 << (line & 7));
update_gpio_ab_int_params(port);
}
static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
{
int line = irq - IRQ_EP93XX_GPIO(0);
int port = line >> 3;
gpio_int_enable[port] |= 1 << (line & 7);
update_gpio_ab_int_params(port);
}
/*
* gpio_int_type1 controls whether the interrupt is level (0) or
* edge (1) triggered, while gpio_int_type2 controls whether it
* triggers on low/falling (0) or high/rising (1).
*/
static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
{
int port;
int line;
line = irq - IRQ_EP93XX_GPIO(0);
gpio_line_config(line, GPIO_IN);
port = line >> 3;
line &= 7;
if (type & IRQT_RISING) {
gpio_int_type1[port] |= 1 << line;
gpio_int_type2[port] |= 1 << line;
} else if (type & IRQT_FALLING) {
gpio_int_type1[port] |= 1 << line;
gpio_int_type2[port] &= ~(1 << line);
} else if (type & IRQT_HIGH) {
gpio_int_type1[port] &= ~(1 << line);
gpio_int_type2[port] |= 1 << line;
} else if (type & IRQT_LOW) {
gpio_int_type1[port] &= ~(1 << line);
gpio_int_type2[port] &= ~(1 << line);
}
update_gpio_ab_int_params(port);
return 0;
}
static struct irqchip ep93xx_gpio_ab_irq_chip = {
.ack = ep93xx_gpio_ab_irq_mask_ack,
.mask = ep93xx_gpio_ab_irq_mask,
.unmask = ep93xx_gpio_ab_irq_unmask,
.set_type = ep93xx_gpio_ab_irq_type,
};
void __init ep93xx_init_irq(void)
{
int irq;
vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
set_irq_handler(irq, do_level_IRQ);
set_irq_flags(irq, IRQF_VALID);
}
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
}
/*************************************************************************
* EP93xx peripheral handling
*************************************************************************/
void __init ep93xx_init_devices(void)
{
unsigned int v;
/*
* Disallow access to MaverickCrunch initially.
*/
v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
}
/*
* arch/arm/mach-ep93xx/gesbc9312.c
* Glomation GESBC-9312-sx support.
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/mtd/physmap.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static void __init gesbc9312_init_machine(void)
{
ep93xx_init_devices();
physmap_configure(0x60000000, 0x00800000, 4, NULL);
}
MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = gesbc9312_init_machine,
MACHINE_END
/*
* arch/arm/mach-ep93xx/ts72xx.c
* Technologic Systems TS72xx SBC support.
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/mtd/physmap.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
static struct map_desc ts72xx_io_desc[] __initdata = {
{
.virtual = TS72XX_MODEL_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
.length = TS72XX_MODEL_SIZE,
.type = MT_DEVICE,
}, {
.virtual = TS72XX_OPTIONS_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
.length = TS72XX_OPTIONS_SIZE,
.type = MT_DEVICE,
}, {
.virtual = TS72XX_OPTIONS2_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
.length = TS72XX_OPTIONS2_SIZE,
.type = MT_DEVICE,
}
};
static struct map_desc ts72xx_nand_io_desc[] __initdata = {
{
.virtual = TS72XX_NAND_DATA_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_NAND1_DATA_PHYS_BASE),
.length = TS72XX_NAND_DATA_SIZE,
.type = MT_DEVICE,
}, {
.virtual = TS72XX_NAND_CONTROL_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_NAND1_CONTROL_PHYS_BASE),
.length = TS72XX_NAND_CONTROL_SIZE,
.type = MT_DEVICE,
}, {
.virtual = TS72XX_NAND_BUSY_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_NAND1_BUSY_PHYS_BASE),
.length = TS72XX_NAND_BUSY_SIZE,
.type = MT_DEVICE,
}
};
static struct map_desc ts72xx_alternate_nand_io_desc[] __initdata = {
{
.virtual = TS72XX_NAND_DATA_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_NAND2_DATA_PHYS_BASE),
.length = TS72XX_NAND_DATA_SIZE,
.type = MT_DEVICE,
}, {
.virtual = TS72XX_NAND_CONTROL_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_NAND2_CONTROL_PHYS_BASE),
.length = TS72XX_NAND_CONTROL_SIZE,
.type = MT_DEVICE,
}, {
.virtual = TS72XX_NAND_BUSY_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_NAND2_BUSY_PHYS_BASE),
.length = TS72XX_NAND_BUSY_SIZE,
.type = MT_DEVICE,
}
};
static void __init ts72xx_map_io(void)
{
ep93xx_map_io();
iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
/*
* The TS-7200 has NOR flash, the other models have NAND flash.
*/
if (!board_is_ts7200()) {
if (is_ts9420_installed()) {
iotable_init(ts72xx_alternate_nand_io_desc,
ARRAY_SIZE(ts72xx_alternate_nand_io_desc));
} else {
iotable_init(ts72xx_nand_io_desc,
ARRAY_SIZE(ts72xx_nand_io_desc));
}
}
}
static void __init ts72xx_init_machine(void)
{
ep93xx_init_devices();
if (board_is_ts7200())
physmap_configure(TS72XX_NOR_PHYS_BASE, 0x01000000, 1, NULL);
}
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = ts72xx_init_machine,
MACHINE_END
......@@ -255,14 +255,12 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
if (nr || !footbridge_cfn_mode())
return 0;
res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
if (!res) {
printk("out of memory for root bus resources");
return 0;
}
memset(res, 0, sizeof(struct resource) * 2);
res[0].flags = IORESOURCE_MEM;
res[0].name = "Footbridge non-prefetch";
res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
......
......@@ -355,12 +355,11 @@ static int impd1_probe(struct lm_device *dev)
if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers"))
return -EBUSY;
impd1 = kmalloc(sizeof(struct impd1_module), GFP_KERNEL);
impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL);
if (!impd1) {
ret = -ENOMEM;
goto release_lm;
}
memset(impd1, 0, sizeof(struct impd1_module));
impd1->base = ioremap(dev->resource.start, SZ_4K);
if (!impd1->base) {
......@@ -389,12 +388,10 @@ static int impd1_probe(struct lm_device *dev)
pc_base = dev->resource.start + idev->offset;
d = kmalloc(sizeof(struct amba_device), GFP_KERNEL);
d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
if (!d)
continue;
memset(d, 0, sizeof(struct amba_device));
snprintf(d->dev.bus_id, sizeof(d->dev.bus_id),
"lm%x:%5.5lx", dev->id, idev->offset >> 12);
......
......@@ -319,12 +319,10 @@ static void __init ap_init(void)
if ((sc_dec & (16 << i)) == 0)
continue;
lmdev = kmalloc(sizeof(struct lm_device), GFP_KERNEL);
lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
if (!lmdev)
continue;
memset(lmdev, 0, sizeof(struct lm_device));
lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
lmdev->resource.flags = IORESOURCE_MEM;
......
......@@ -74,12 +74,10 @@ static int iq31244_setup(int nr, struct pci_sys_data *sys)
if(nr != 0)
return 0;
res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
if (!res)
panic("PCI: unable to alloc resources");
memset(res, 0, sizeof(struct resource) * 2);
res[0].start = IOP321_PCI_LOWER_IO_VA;
res[0].end = IOP321_PCI_UPPER_IO_VA;
res[0].name = "IQ31244 PCI I/O Space";
......
......@@ -68,12 +68,10 @@ static int iq80321_setup(int nr, struct pci_sys_data *sys)
if(nr != 0)
return 0;
res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
if (!res)
panic("PCI: unable to alloc resources");
memset(res, 0, sizeof(struct resource) * 2);
res[0].start = IOP321_PCI_LOWER_IO_VA;
res[0].end = IOP321_PCI_UPPER_IO_VA;
res[0].name = "IQ80321 PCI I/O Space";
......
......@@ -64,12 +64,10 @@ static int iq80331_setup(int nr, struct pci_sys_data *sys)
if(nr != 0)
return 0;
res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
if (!res)
panic("PCI: unable to alloc resources");
memset(res, 0, sizeof(struct resource) * 2);
res[0].start = IOP331_PCI_LOWER_IO_VA;
res[0].end = IOP331_PCI_UPPER_IO_VA;
res[0].name = "IQ80331 PCI I/O Space";
......
......@@ -70,12 +70,10 @@ static int iq80332_setup(int nr, struct pci_sys_data *sys)
if(nr != 0)
return 0;
res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
if (!res)
panic("PCI: unable to alloc resources");
memset(res, 0, sizeof(struct resource) * 2);
res[0].start = IOP331_PCI_LOWER_IO_VA;
res[0].end = IOP331_PCI_UPPER_IO_VA;
res[0].name = "IQ80332 PCI I/O Space";
......
......@@ -43,12 +43,17 @@ config ARCH_IXDP2401
this platform, see <file:Documentation/arm/IXP2000>.
config ARCH_IXDP2801
bool "Support Intel IXDP2801"
bool "Support Intel IXDP2801 and IXDP28x5"
help
Say 'Y' here if you want your kernel to support the Intel
IXDP2801 reference platform. For more information on
IXDP2801/2805/2855 reference platforms. For more information on
this platform, see <file:Documentation/arm/IXP2000>.
config MACH_IXDP28X5
bool
depends on ARCH_IXDP2801
default y
config ARCH_IXDP2X01
bool
depends on ARCH_IXDP2401 || ARCH_IXDP2801
......
#
# Makefile for the linux kernel.
#
obj-y := core.o pci.o uengine.o
obj-y := core.o pci.o
obj-m :=
obj-n :=
obj- :=
......
......@@ -288,8 +288,6 @@ void gpio_line_config(int line, int direction)
local_irq_save(flags);
if (direction == GPIO_OUT) {
irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0;
/* if it's an output, it ain't an interrupt anymore */
GPIO_IRQ_falling_edge &= ~(1 << line);
GPIO_IRQ_rising_edge &= ~(1 << line);
......@@ -351,11 +349,6 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
GPIO_IRQ_level_high &= ~(1 << line);
update_gpio_int_csrs();
/*
* Finally, mark the corresponding IRQ as valid.
*/
irq_desc[irq].valid = 1;
return 0;
}
......@@ -506,14 +499,10 @@ void __init ixp2000_init_irq(void)
}
set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
/*
* GPIO IRQs are invalid until someone sets the interrupt mode
* by calling set_irq_type().
*/
for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
set_irq_chip(irq, &ixp2000_GPIO_irq_chip);
set_irq_handler(irq, do_level_IRQ);
set_irq_flags(irq, 0);
set_irq_flags(irq, IRQF_VALID);
}
set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler);
......
......@@ -284,7 +284,7 @@ static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys)
{
sys->mem_offset = 0xe0000000;
if (machine_is_ixdp2801())
if (machine_is_ixdp2801() || machine_is_ixdp28x5())
sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16);
return ixp2000_pci_setup(nr, sys);
......@@ -300,7 +300,8 @@ struct hw_pci ixdp2x01_pci __initdata = {
int __init ixdp2x01_pci_init(void)
{
if (machine_is_ixdp2401() || machine_is_ixdp2801())
if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\
machine_is_ixdp28x5())
pci_common_init(&ixdp2x01_pci);
return 0;
......@@ -400,6 +401,21 @@ MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
.timer = &ixdp2x01_timer,
.init_machine = ixdp2x01_init_machine,
MACHINE_END
/*
* IXDP28x5 is basically an IXDP2801 with a different CPU but Intel
* changed the machine ID in the bootloader
*/
MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.phys_io = IXP2000_UART_PHYS_BASE,
.io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
.init_machine = ixdp2x01_init_machine,
MACHINE_END
#endif
......@@ -463,7 +463,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
if (nr >= 1)
return 0;
res = kmalloc(sizeof(*res) * 2, GFP_KERNEL);
res = kzalloc(sizeof(*res) * 2, GFP_KERNEL);
if (res == NULL) {
/*
* If we're out of memory this early, something is wrong,
......@@ -471,7 +471,6 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
*/
panic("PCI: unable to allocate resources?\n");
}
memset(res, 0, sizeof(*res) * 2);
local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
......
......@@ -91,7 +91,7 @@ static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
/*
* IRQ -> GPIO mapping table
*/
static int irq2gpio[32] = {
static char irq2gpio[32] = {
-1, -1, -1, -1, -1, -1, 0, 1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, 2, 3, 4, 5, 6,
......@@ -153,6 +153,9 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
/* Set the new style */
*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
/* Configure the line as an input */
gpio_line_config(line, IXP4XX_GPIO_IN);
return 0;
}
......
......@@ -12,5 +12,6 @@ extern struct sys_timer lh7a40x_timer;
extern void lh7a400_init_irq (void);
extern void lh7a404_init_irq (void);
extern void lh7a40x_init_board_irq (void);
#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs)
......@@ -16,6 +16,7 @@
#include <asm/mach/hardware.h>
#include <asm/mach/irqs.h>
#include "common.h"
/* KEV7a400 CPLD IRQ handling */
......
......@@ -16,9 +16,9 @@
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/arch/irq.h>
#include <asm/arch/irqs.h>
#include "common.h"
/* CPU IRQ handling */
......
......@@ -16,9 +16,10 @@
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/arch/irq.h>
#include <asm/arch/irqs.h>
#include "common.h"
#define USE_PRIORITIES
/* See Documentation/arm/Sharp-LH/VectoredInterruptController for more
......
......@@ -19,6 +19,7 @@
#include <asm/mach/irq.h>
#include <asm/arch/irqs.h>
#include "common.h"
static void lh7a40x_ack_cpld_irq (u32 irq)
{
......
......@@ -3,7 +3,7 @@
#
# Common support (must be linked before board specific support)
obj-y += generic.o irq.o dma.o time.o
obj-y += clock.o generic.o irq.o dma.o time.o
obj-$(CONFIG_PXA25x) += pxa25x.o
obj-$(CONFIG_PXA27x) += pxa27x.o
......
/*
* linux/arch/arm/mach-sa1100/clock.c
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
#include <linux/spinlock.h>
#include <asm/arch/pxa-regs.h>
#include <asm/hardware.h>
#include <asm/semaphore.h>
struct clk {
struct list_head node;
unsigned long rate;
struct module *owner;
const char *name;
unsigned int enabled;
void (*enable)(void);
void (*disable)(void);
};
static LIST_HEAD(clocks);
static DECLARE_MUTEX(clocks_sem);
static DEFINE_SPINLOCK(clocks_lock);
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
down(&clocks_sem);
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
up(&clocks_sem);
return clk;
}
EXPORT_SYMBOL(clk_get);
void clk_put(struct clk *clk)
{
module_put(clk->owner);
}
EXPORT_SYMBOL(clk_put);
int clk_enable(struct clk *clk)
{
unsigned long flags;
spin_lock_irqsave(&clocks_lock, flags);
if (clk->enabled++ == 0)
clk->enable();
spin_unlock_irqrestore(&clocks_lock, flags);
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
unsigned long flags;
WARN_ON(clk->enabled == 0);
spin_lock_irqsave(&clocks_lock, flags);
if (--clk->enabled == 0)
clk->disable();
spin_unlock_irqrestore(&clocks_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
static void clk_gpio27_enable(void)
{
pxa_gpio_mode(GPIO11_3_6MHz_MD);
}
static void clk_gpio27_disable(void)
{
}
static struct clk clk_gpio27 = {
.name = "GPIO27_CLK",
.rate = 3686400,
.enable = clk_gpio27_enable,
.disable = clk_gpio27_disable,
};
int clk_register(struct clk *clk)
{
down(&clocks_sem);
list_add(&clk->node, &clocks);
up(&clocks_sem);
return 0;
}
EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
down(&clocks_sem);
list_del(&clk->node);
up(&clocks_sem);
}
EXPORT_SYMBOL(clk_unregister);
static int __init clk_init(void)
{
clk_register(&clk_gpio27);
return 0;
}
arch_initcall(clk_init);
......@@ -32,7 +32,6 @@
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/irq.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
......
......@@ -29,7 +29,6 @@
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/irq.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
#include <asm/arch/irda.h>
......
......@@ -33,7 +33,6 @@
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/irq.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/ohci.h>
......
......@@ -34,7 +34,6 @@
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/irq.h>
#include <asm/arch/tosa.h>
#include <asm/hardware/scoop.h>
......
......@@ -9,6 +9,13 @@ config MACH_ANUBIS
Say Y gere if you are using the Simtec Electronics ANUBIS
development system
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
......
......@@ -38,6 +38,7 @@ obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
# machine specific support
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
obj-$(CONFIG_MACH_N30) += mach-n30.o
......
......@@ -38,12 +38,14 @@
#include <linux/ioport.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
#include "clock.h"
#include "cpu.h"
......@@ -51,7 +53,8 @@
/* clock information */
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
DEFINE_MUTEX(clocks_mutex);
/* old functions */
......@@ -178,12 +181,24 @@ unsigned long clk_get_rate(struct clk *clk)
long clk_round_rate(struct clk *clk, unsigned long rate)
{
if (!IS_ERR(clk) && clk->round_rate)
return (clk->round_rate)(clk, rate);
return rate;
}
int clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret;
if (IS_ERR(clk))
return -EINVAL;
mutex_lock(&clocks_mutex);
ret = (clk->set_rate)(clk, rate);
mutex_unlock(&clocks_mutex);
return ret;
}
struct clk *clk_get_parent(struct clk *clk)
......@@ -191,6 +206,23 @@ struct clk *clk_get_parent(struct clk *clk)
return clk->parent;
}
int clk_set_parent(struct clk *clk, struct clk *parent)
{
int ret = 0;
if (IS_ERR(clk))
return -EINVAL;
mutex_lock(&clocks_mutex);
if (clk->set_parent)
ret = (clk->set_parent)(clk, parent);
mutex_unlock(&clocks_mutex);
return ret;
}
EXPORT_SYMBOL(clk_get);
EXPORT_SYMBOL(clk_put);
EXPORT_SYMBOL(clk_enable);
......@@ -199,6 +231,29 @@ EXPORT_SYMBOL(clk_get_rate);
EXPORT_SYMBOL(clk_round_rate);
EXPORT_SYMBOL(clk_set_rate);
EXPORT_SYMBOL(clk_get_parent);
EXPORT_SYMBOL(clk_set_parent);
/* base clock enable */
static int s3c24xx_upll_enable(struct clk *clk, int enable)
{
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
unsigned long orig = clkslow;
if (enable)
clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
else
clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
__raw_writel(clkslow, S3C2410_CLKSLOW);
/* if we started the UPLL, then allow to settle */
if (enable && !(orig & S3C2410_CLKSLOW_UCLK_OFF))
udelay(200);
return 0;
}
/* base clocks */
......@@ -210,6 +265,14 @@ static struct clk clk_xtal = {
.ctrlbit = 0,
};
static struct clk clk_upll = {
.name = "upll",
.id = -1,
.parent = NULL,
.enable = s3c24xx_upll_enable,
.ctrlbit = 0,
};
static struct clk clk_f = {
.name = "fclk",
.id = -1,
......@@ -234,26 +297,124 @@ static struct clk clk_p = {
.ctrlbit = 0,
};
struct clk clk_usb_bus = {
.name = "usb-bus",
.id = -1,
.rate = 0,
.parent = &clk_upll,
};
/* clocks that could be registered by external code */
static int s3c24xx_dclk_enable(struct clk *clk, int enable)
{
unsigned long dclkcon = __raw_readl(S3C2410_DCLKCON);
if (enable)
dclkcon |= clk->ctrlbit;
else
dclkcon &= ~clk->ctrlbit;
__raw_writel(dclkcon, S3C2410_DCLKCON);
return 0;
}
static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
{
unsigned long dclkcon;
unsigned int uclk;
if (parent == &clk_upll)
uclk = 1;
else if (parent == &clk_p)
uclk = 0;
else
return -EINVAL;
clk->parent = parent;
dclkcon = __raw_readl(S3C2410_DCLKCON);
if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
if (uclk)
dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
else
dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
} else {
if (uclk)
dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
else
dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
}
__raw_writel(dclkcon, S3C2410_DCLKCON);
return 0;
}
static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
{
unsigned long mask;
unsigned long source;
/* calculate the MISCCR setting for the clock */
if (parent == &clk_xtal)
source = S3C2410_MISCCR_CLK0_MPLL;
else if (parent == &clk_upll)
source = S3C2410_MISCCR_CLK0_UPLL;
else if (parent == &clk_f)
source = S3C2410_MISCCR_CLK0_FCLK;
else if (parent == &clk_p)
source = S3C2410_MISCCR_CLK0_PCLK;
else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
source = S3C2410_MISCCR_CLK0_DCLK0;
else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
source = S3C2410_MISCCR_CLK0_DCLK0;
else
return -EINVAL;
if (clk == &s3c24xx_dclk0)
mask = S3C2410_MISCCR_CLK0_MASK;
else {
source <<= 4;
mask = S3C2410_MISCCR_CLK1_MASK;
}
s3c2410_modify_misccr(mask, source);
return 0;
}
/* external clock definitions */
struct clk s3c24xx_dclk0 = {
.name = "dclk0",
.id = -1,
.ctrlbit = S3C2410_DCLKCON_DCLK0EN,
.enable = s3c24xx_dclk_enable,
.set_parent = s3c24xx_dclk_setparent,
};
struct clk s3c24xx_dclk1 = {
.name = "dclk1",
.id = -1,
.ctrlbit = S3C2410_DCLKCON_DCLK0EN,
.enable = s3c24xx_dclk_enable,
.set_parent = s3c24xx_dclk_setparent,
};
struct clk s3c24xx_clkout0 = {
.name = "clkout0",
.id = -1,
.set_parent = s3c24xx_clkout_setparent,
};
struct clk s3c24xx_clkout1 = {
.name = "clkout1",
.id = -1,
.set_parent = s3c24xx_clkout_setparent,
};
struct clk s3c24xx_uclk = {
......@@ -262,7 +423,7 @@ struct clk s3c24xx_uclk = {
};
/* clock definitions */
/* standard clock definitions */
static struct clk init_clocks[] = {
{
......@@ -374,7 +535,7 @@ int s3c24xx_register_clock(struct clk *clk)
/* if this is a standard clock, set the usage state */
if (clk->ctrlbit) {
if (clk->ctrlbit && clk->enable == s3c24xx_clkcon_enable) {
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0;
......@@ -396,6 +557,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
unsigned long hclk,
unsigned long pclk)
{
unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
struct clk *clkp = init_clocks;
int ptr;
......@@ -406,6 +568,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
/* initialise the main system clocks */
clk_xtal.rate = xtal;
clk_upll.rate = s3c2410_get_pll(upllcon, xtal);
clk_h.rate = hclk;
clk_p.rate = pclk;
......@@ -439,6 +602,9 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
if (s3c24xx_register_clock(&clk_xtal) < 0)
printk(KERN_ERR "failed to register master xtal\n");
if (s3c24xx_register_clock(&clk_upll) < 0)
printk(KERN_ERR "failed to register upll clock\n");
if (s3c24xx_register_clock(&clk_f) < 0)
printk(KERN_ERR "failed to register cpu fclk\n");
......@@ -448,6 +614,10 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
if (s3c24xx_register_clock(&clk_p) < 0)
printk(KERN_ERR "failed to register cpu pclk\n");
if (s3c24xx_register_clock(&clk_usb_bus) < 0)
printk(KERN_ERR "failed to register usb bus clock\n");
/* register clocks from clock array */
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
......
......@@ -19,7 +19,11 @@ struct clk {
int usage;
unsigned long rate;
unsigned long ctrlbit;
int (*enable)(struct clk *, int enable);
int (*set_rate)(struct clk *c, unsigned long rate);
unsigned long (*round_rate)(struct clk *c, unsigned long rate);
int (*set_parent)(struct clk *c, struct clk *parent);
};
/* other clocks which may be registered by board support */
......@@ -30,11 +34,15 @@ extern struct clk s3c24xx_clkout0;
extern struct clk s3c24xx_clkout1;
extern struct clk s3c24xx_uclk;
extern struct clk clk_usb_bus;
/* exports for arch/arm/mach-s3c2410
*
* Please DO NOT use these outside of arch/arm/mach-s3c2410
*/
extern struct mutex clocks_mutex;
extern int s3c24xx_clkcon_enable(struct clk *clk, int enable);
extern int s3c24xx_register_clock(struct clk *clk);
......
/* linux/arch/arm/mach-s3c2410/mach-osiris.c
*
* Copyright (c) 2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/osiris-map.h>
#include <asm/arch/osiris-cpld.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/nand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include "clock.h"
#include "devs.h"
#include "cpu.h"
/* onboard perihpheral map */
static struct map_desc osiris_iodesc[] __initdata = {
/* ISA IO areas (may be over-written later) */
{
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = __phys_to_pfn(S3C2410_CS5),
.length = SZ_16M,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = __phys_to_pfn(S3C2410_CS5),
.length = SZ_16M,
.type = MT_DEVICE,
},
/* CPLD control registers */
{
.virtual = (u32)OSIRIS_VA_CTRL1,
.pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
.length = SZ_16K,
.type = MT_DEVICE
}, {
.virtual = (u32)OSIRIS_VA_CTRL2,
.pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
.length = SZ_16K,
.type = MT_DEVICE
},
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
[0] = {
.name = "uclk",
.divisor = 1,
.min_baud = 0,
.max_baud = 0,
},
[1] = {
.name = "pclk",
.divisor = 1,
.min_baud = 0,
.max_baud = 0.
}
};
static struct s3c2410_uartcfg osiris_uartcfgs[] = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = osiris_serial_clocks,
.clocks_size = ARRAY_SIZE(osiris_serial_clocks)
},
[1] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = osiris_serial_clocks,
.clocks_size = ARRAY_SIZE(osiris_serial_clocks)
},
};
/* NAND Flash on Osiris board */
static int external_map[] = { 2 };
static int chip0_map[] = { 0 };
static int chip1_map[] = { 1 };
static struct mtd_partition osiris_default_nand_part[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_16K,
.offset = 0
},
[1] = {
.name = "/boot",
.size = SZ_4M - SZ_16K,
.offset = SZ_16K,
},
[2] = {
.name = "user1",
.offset = SZ_4M,
.size = SZ_32M - SZ_4M,
},
[3] = {
.name = "user2",
.offset = SZ_32M,
.size = MTDPART_SIZ_FULL,
}
};
/* the Osiris has 3 selectable slots for nand-flash, the two
* on-board chip areas, as well as the external slot.
*
* Note, there is no current hot-plug support for the External
* socket.
*/
static struct s3c2410_nand_set osiris_nand_sets[] = {
[1] = {
.name = "External",
.nr_chips = 1,
.nr_map = external_map,
.nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
.partitions = osiris_default_nand_part
},
[0] = {
.name = "chip0",
.nr_chips = 1,
.nr_map = chip0_map,
.nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
.partitions = osiris_default_nand_part
},
[2] = {
.name = "chip1",
.nr_chips = 1,
.nr_map = chip1_map,
.nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
.partitions = osiris_default_nand_part
},
};
static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
{
unsigned int tmp;
slot = set->nr_map[slot] & 3;
pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
slot, set, set->nr_map);
tmp = __raw_readb(OSIRIS_VA_CTRL1);
tmp &= ~OSIRIS_CTRL1_NANDSEL;
tmp |= slot;
pr_debug("osiris_nand: ctrl1 now %02x\n", tmp);
__raw_writeb(tmp, OSIRIS_VA_CTRL1);
}
static struct s3c2410_platform_nand osiris_nand_info = {
.tacls = 25,
.twrph0 = 60,
.twrph1 = 60,
.nr_sets = ARRAY_SIZE(osiris_nand_sets),
.sets = osiris_nand_sets,
.select_chip = osiris_nand_select,
};
/* PCMCIA control and configuration */
static struct resource osiris_pcmcia_resource[] = {
[0] = {
.start = 0x0f000000,
.end = 0x0f100000,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 0x0c000000,
.end = 0x0c100000,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device osiris_pcmcia = {
.name = "osiris-pcmcia",
.id = -1,
.num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
.resource = osiris_pcmcia_resource,
};
/* Standard Osiris devices */
static struct platform_device *osiris_devices[] __initdata = {
&s3c_device_i2c,
&s3c_device_nand,
&osiris_pcmcia,
};
static struct clk *osiris_clocks[] = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
&s3c24xx_clkout0,
&s3c24xx_clkout1,
&s3c24xx_uclk,
};
static struct s3c24xx_board osiris_board __initdata = {
.devices = osiris_devices,
.devices_count = ARRAY_SIZE(osiris_devices),
.clocks = osiris_clocks,
.clocks_count = ARRAY_SIZE(osiris_clocks)
};
static void __init osiris_map_io(void)
{
unsigned long flags;
/* initialise the clocks */
s3c24xx_dclk0.parent = NULL;
s3c24xx_dclk0.rate = 12*1000*1000;
s3c24xx_dclk1.parent = NULL;
s3c24xx_dclk1.rate = 24*1000*1000;
s3c24xx_clkout0.parent = &s3c24xx_dclk0;
s3c24xx_clkout1.parent = &s3c24xx_dclk1;
s3c24xx_uclk.parent = &s3c24xx_clkout1;
s3c_device_nand.dev.platform_data = &osiris_nand_info;
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
s3c24xx_set_board(&osiris_board);
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
local_irq_save(flags);
__raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
local_irq_restore(flags);
/* write-protect line to the NAND */
s3c2410_gpio_setpin(S3C2410_GPA0, 1);
}
MACHINE_START(OSIRIS, "Simtec-OSIRIS")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = osiris_map_io,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
MACHINE_END
......@@ -31,6 +31,7 @@
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mutex.h>
#include <linux/clk.h>
#include <asm/hardware.h>
......@@ -45,10 +46,47 @@
/* S3C2440 extended clock support */
static struct clk s3c2440_clk_upll = {
.name = "upll",
.id = -1,
};
static unsigned long s3c2440_camif_upll_round(struct clk *clk,
unsigned long rate)
{
unsigned long parent_rate = clk_get_rate(clk->parent);
int div;
if (rate > parent_rate)
return parent_rate;
/* note, we remove the +/- 1 calculations for the divisor */
div = (parent_rate / rate) / 2;
if (div < 1)
div = 1;
else if (div > 16)
div = 16;
return parent_rate / (div * 2);
}
static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
{
unsigned long parent_rate = clk_get_rate(clk->parent);
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
rate = s3c2440_camif_upll_round(clk, rate);
camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
if (rate != parent_rate) {
camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
camdivn |= (((parent_rate / rate) / 2) - 1);
}
__raw_writel(camdivn, S3C2440_CAMDIVN);
return 0;
}
/* Extra S3C2440 clocks */
static struct clk s3c2440_clk_cam = {
.name = "camif",
......@@ -57,6 +95,13 @@ static struct clk s3c2440_clk_cam = {
.ctrlbit = S3C2440_CLKCON_CAMERA,
};
static struct clk s3c2440_clk_cam_upll = {
.name = "camif-upll",
.id = -1,
.set_rate = s3c2440_camif_upll_setrate,
.round_rate = s3c2440_camif_upll_round,
};
static struct clk s3c2440_clk_ac97 = {
.name = "ac97",
.id = -1,
......@@ -66,38 +111,46 @@ static struct clk s3c2440_clk_ac97 = {
static int s3c2440_clk_add(struct sys_device *sysdev)
{
unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
unsigned long clkdivn;
struct clk *clk_h;
struct clk *clk_p;
struct clk *clk_xtal;
struct clk *clk_upll;
clk_xtal = clk_get(NULL, "xtal");
if (IS_ERR(clk_xtal)) {
printk(KERN_ERR "S3C2440: Failed to get clk_xtal\n");
return -EINVAL;
}
s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate);
printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz, DVS %s\n",
print_mhz(s3c2440_clk_upll.rate),
printk("S3C2440: Clock Support, DVS %s\n",
(camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
clk_p = clk_get(NULL, "pclk");
clk_h = clk_get(NULL, "hclk");
clk_upll = clk_get(NULL, "upll");
if (IS_ERR(clk_p) || IS_ERR(clk_h)) {
if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) {
printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
return -EINVAL;
}
/* check rate of UPLL, and if it is near 96MHz, then change
* to using half the UPLL rate for the system */
if (clk_get_rate(clk_upll) > (94 * MHZ)) {
clk_usb_bus.rate = clk_get_rate(clk_upll) / 2;
mutex_lock(&clocks_mutex);
clkdivn = __raw_readl(S3C2410_CLKDIVN);
clkdivn |= S3C2440_CLKDIVN_UCLK;
__raw_writel(camdivn, S3C2410_CLKDIVN);
mutex_unlock(&clocks_mutex);
}
s3c2440_clk_cam.parent = clk_h;
s3c2440_clk_ac97.parent = clk_p;
s3c2440_clk_cam_upll.parent = clk_upll;
s3c24xx_register_clock(&s3c2440_clk_ac97);
s3c24xx_register_clock(&s3c2440_clk_cam);
s3c24xx_register_clock(&s3c2440_clk_upll);
s3c24xx_register_clock(&s3c2440_clk_cam_upll);
clk_disable(&s3c2440_clk_ac97);
clk_disable(&s3c2440_clk_cam);
......
......@@ -142,6 +142,12 @@ static struct irqaction s3c2410_timer_irq = {
.handler = s3c2410_timer_interrupt,
};
#define use_tclk1_12() ( \
machine_is_bast() || \
machine_is_vr1000() || \
machine_is_anubis() || \
machine_is_osiris() )
/*
* Set up timer interrupt, and return the current time in seconds.
*
......@@ -165,7 +171,7 @@ static void s3c2410_timer_setup (void)
/* configure the system for whichever machine is in use */
if (machine_is_bast() || machine_is_vr1000() || machine_is_anubis()) {
if (use_tclk1_12()) {
/* timer is at 12MHz, scaler is 1 */
timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
tcnt = 12000000 / HZ;
......
......@@ -3,7 +3,7 @@
#
# Common support
obj-y := generic.o irq.o dma.o time.o
obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
obj-m :=
obj-n :=
obj- :=
......
/*
* linux/arch/arm/mach-sa1100/clock.c
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
#include <linux/spinlock.h>
#include <asm/hardware.h>
#include <asm/semaphore.h>
struct clk {
struct list_head node;
unsigned long rate;
struct module *owner;
const char *name;
unsigned int enabled;
void (*enable)(void);
void (*disable)(void);
};
static LIST_HEAD(clocks);
static DECLARE_MUTEX(clocks_sem);
static DEFINE_SPINLOCK(clocks_lock);
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
down(&clocks_sem);
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
up(&clocks_sem);
return clk;
}
EXPORT_SYMBOL(clk_get);
void clk_put(struct clk *clk)
{
module_put(clk->owner);
}
EXPORT_SYMBOL(clk_put);
int clk_enable(struct clk *clk)
{
unsigned long flags;
spin_lock_irqsave(&clocks_lock, flags);
if (clk->enabled++ == 0)
clk->enable();
spin_unlock_irqrestore(&clocks_lock, flags);
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
unsigned long flags;
WARN_ON(clk->enabled == 0);
spin_lock_irqsave(&clocks_lock, flags);
if (--clk->enabled == 0)
clk->disable();
spin_unlock_irqrestore(&clocks_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
static void clk_gpio27_enable(void)
{
/*
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
* (SA-1110 Developer's Manual, section 9.1.2.1)
*/
GAFR |= GPIO_32_768kHz;
GPDR |= GPIO_32_768kHz;
TUCR = TUCR_3_6864MHz;
}
static void clk_gpio27_disable(void)
{
TUCR = 0;
GPDR &= ~GPIO_32_768kHz;
GAFR &= ~GPIO_32_768kHz;
}
static struct clk clk_gpio27 = {
.name = "GPIO27_CLK",
.rate = 3686400,
.enable = clk_gpio27_enable,
.disable = clk_gpio27_disable,
};
int clk_register(struct clk *clk)
{
down(&clocks_sem);
list_add(&clk->node, &clocks);
up(&clocks_sem);
return 0;
}
EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
down(&clocks_sem);
list_del(&clk->node);
up(&clocks_sem);
}
EXPORT_SYMBOL(clk_unregister);
static int __init clk_init(void)
{
clk_register(&clk_gpio27);
return 0;
}
arch_initcall(clk_init);
......@@ -112,7 +112,7 @@ void __init versatile_init_irq(void)
{
unsigned int i;
vic_init(VA_VIC_BASE, ~(1 << 31));
vic_init(VA_VIC_BASE, IRQ_VIC_START, ~(1 << 31));
set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq);
enable_irq(IRQ_VICSOURCE31);
......
......@@ -62,7 +62,7 @@ config CPU_ARM720T
# ARM920T
config CPU_ARM920T
bool "Support ARM920T processor" if !ARCH_S3C2410
depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
depends on ARCH_EP93XX || ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
default y if ARCH_S3C2410 || ARCH_AT91RM9200
select CPU_32v4
select CPU_ABRT_EV4T
......
......@@ -19,7 +19,6 @@
#include <linux/initrd.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/setup.h>
#include <asm/tlb.h>
......
......@@ -26,7 +26,6 @@
#include <linux/vmalloc.h>
#include <asm/cacheflush.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
......
......@@ -32,7 +32,6 @@
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/hardware.h>
/*
* This is the maximum size of an area which will be invalidated
......
......@@ -32,7 +32,6 @@
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/hardware.h>
/*
* This is the maximum size of an area which will be invalidated
......
......@@ -37,7 +37,6 @@
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/hardware.h>
/*
* Function: arm720_proc_init (void)
......
......@@ -30,7 +30,6 @@
#include <asm/assembler.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/hardware.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
......
......@@ -31,7 +31,6 @@
#include <asm/assembler.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/hardware.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
......
......@@ -53,7 +53,6 @@
#include <asm/assembler.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/hardware.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
......
......@@ -30,7 +30,6 @@
#include <asm/assembler.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/hardware.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
......
......@@ -24,7 +24,6 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/procinfo.h>
#include <asm/hardware.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/ptrace.h>
......
......@@ -10,17 +10,18 @@
#include <linux/init.h>
#include <linux/oprofile.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/sysdev.h>
#include <asm/semaphore.h>
#include <linux/mutex.h>
#include "op_counter.h"
#include "op_arm_model.h"
static struct op_arm_model_spec *op_arm_model;
static int op_arm_enabled;
static struct semaphore op_arm_sem;
static DEFINE_MUTEX(op_arm_mutex);
struct op_counter_config counter_config[OP_MAX_COUNTER];
struct op_counter_config *counter_config;
static int op_arm_create_files(struct super_block *sb, struct dentry *root)
{
......@@ -28,7 +29,7 @@ static int op_arm_create_files(struct super_block *sb, struct dentry *root)
for (i = 0; i < op_arm_model->num_counters; i++) {
struct dentry *dir;
char buf[2];
char buf[4];
snprintf(buf, sizeof buf, "%d", i);
dir = oprofilefs_mkdir(sb, root, buf);
......@@ -57,40 +58,40 @@ static int op_arm_start(void)
{
int ret = -EBUSY;
down(&op_arm_sem);
mutex_lock(&op_arm_mutex);
if (!op_arm_enabled) {
ret = op_arm_model->start();
op_arm_enabled = !ret;
}
up(&op_arm_sem);
mutex_unlock(&op_arm_mutex);
return ret;
}
static void op_arm_stop(void)
{
down(&op_arm_sem);
mutex_lock(&op_arm_mutex);
if (op_arm_enabled)
op_arm_model->stop();
op_arm_enabled = 0;
up(&op_arm_sem);
mutex_unlock(&op_arm_mutex);
}
#ifdef CONFIG_PM
static int op_arm_suspend(struct sys_device *dev, pm_message_t state)
{
down(&op_arm_sem);
mutex_lock(&op_arm_mutex);
if (op_arm_enabled)
op_arm_model->stop();
up(&op_arm_sem);
mutex_unlock(&op_arm_mutex);
return 0;
}
static int op_arm_resume(struct sys_device *dev)
{
down(&op_arm_sem);
mutex_lock(&op_arm_mutex);
if (op_arm_enabled && op_arm_model->start())
op_arm_enabled = 0;
up(&op_arm_sem);
mutex_unlock(&op_arm_mutex);
return 0;
}
......@@ -135,12 +136,15 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
#endif
if (spec) {
init_MUTEX(&op_arm_sem);
ret = spec->init();
if (ret < 0)
return ret;
counter_config = kcalloc(spec->num_counters, sizeof(struct op_counter_config),
GFP_KERNEL);
if (!counter_config)
return -ENOMEM;
op_arm_model = spec;
init_driverfs();
ops->create_files = op_arm_create_files;
......@@ -162,5 +166,5 @@ void oprofile_arch_exit(void)
exit_driverfs();
op_arm_model = NULL;
}
kfree(counter_config);
}
......@@ -24,6 +24,6 @@ struct op_counter_config {
unsigned long user;
};
extern struct op_counter_config counter_config[];
extern struct op_counter_config *counter_config;
#endif /* OP_COUNTER_H */
......@@ -22,6 +22,7 @@
.globl do_vfp
do_vfp:
enable_irq
ldr r4, .LCvfp
add r10, r10, #TI_VFPSTATE @ r10 = workspace
ldr pc, [r4] @ call VFP entry point
......
......@@ -16,7 +16,7 @@
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <asm/arch/uengine.h>
#include <asm/hardware/uengine.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include "ixpdev.h"
......
......@@ -16,7 +16,7 @@
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <asm/arch/uengine.h>
#include <asm/hardware/uengine.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include "ixp2400_rx.ucode"
......
/*
* linux/include/asm-arm/arch-aaec2000/param.h
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_PARAM_H
#define __ASM_ARCH_PARAM_H
#endif /* __ASM_ARCH_PARAM_H */
/*
* include/asm-arm/arch-at91rm9200/param.h
*
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_PARAM_H
#define __ASM_ARCH_PARAM_H
/*
* We use default params
*/
#endif
......@@ -17,15 +17,5 @@
orr \rx, \rx, #0x00000be0
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
.endm
.macro waituart,rd,rx
1001: ldrb \rd, [\rx, #0x14]
tst \rd, #0x20
beq 1001b
.endm
#define UART_SHIFT 2
#include <asm/hardware/debug-8250.S>
/*
* linux/include/asm-arm/arch-cl7500/param.h
*
* Copyright (C) 1999 Nexus Electronics Ltd
*/
/*
* linux/include/asm-arm/arch-clps711x/param.h
*
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
......@@ -16,19 +16,6 @@
orr \rx, \rx, #0x00000be0
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1002: ldrb \rd, [\rx, #0x14]
and \rd, \rd, #0x60
teq \rd, #0x60
bne 1002b
.endm
.macro waituart,rd,rx
1001: ldrb \rd, [\rx, #0x18]
tst \rd, #0x10
beq 1001b
.endm
#define UART_SHIFT 2
#define FLOW_CONTROL
#include <asm/hardware/debug-8250.h>
/*
* linux/include/asm-arm/arch-ebsa110/param.h
*/
#define HZ 200
......@@ -23,22 +23,10 @@
orr \rx, \rx, #0x000003f8
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
#define UART_SHIFT 0
#define FLOW_CONTROL
#include <asm/hardware/debug-8250.S>
.macro busyuart,rd,rx
1002: ldrb \rd, [\rx, #0x5]
and \rd, \rd, #0x60
teq \rd, #0x60
bne 1002b
.endm
.macro waituart,rd,rx
1001: ldrb \rd, [\rx, #0x6]
tst \rd, #0x10
beq 1001b
.endm
#else
/* For EBSA285 debugging */
.equ dc21285_high, ARMCSR_BASE & 0xff000000
......
/*
* linux/include/asm-arm/arch-ebsa285/param.h
*/
/*
* linux/include/asm-arm/arch-ep93xx/debug-macro.S
* Debugging macro include header
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <asm/arch/ep93xx-regs.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base
ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base
orr \rx, \rx, #0x000c0000
.endm
#include <asm/hardware/debug-pl01x.S>
/*
* linux/include/asm-arm/arch-ep93xx/dma.h
*/
/*
* linux/include/asm-arm/arch-ep93xx/entry-macro.S
* IRQ demultiplexing for EP93xx
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <asm/arch/ep93xx-regs.h>
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =(EP93XX_AHB_VIRT_BASE)
orr \base, \base, #0x000b0000
mov \irqnr, #0
ldr \irqstat, [\base] @ lower 32 interrupts
cmp \irqstat, #0
bne 1001f
eor \base, \base, #0x00070000
ldr \irqstat, [\base] @ upper 32 interrupts
cmp \irqstat, #0
beq 1002f
mov \irqnr, #0x20
1001:
movs \tmp, \irqstat, lsl #16
movne \irqstat, \tmp
addeq \irqnr, \irqnr, #16
movs \tmp, \irqstat, lsl #8
movne \irqstat, \tmp
addeq \irqnr, \irqnr, #8
movs \tmp, \irqstat, lsl #4
movne \irqstat, \tmp
addeq \irqnr, \irqnr, #4
movs \tmp, \irqstat, lsl #2
movne \irqstat, \tmp
addeq \irqnr, \irqnr, #2
movs \tmp, \irqstat, lsl #1
addeq \irqnr, \irqnr, #1
orrs \base, \base, #1
1002:
.endm
/*
* linux/include/asm-arm/arch-ep93xx/ep93xx-regs.h
*/
#ifndef __ASM_ARCH_EP93XX_REGS_H
#define __ASM_ARCH_EP93XX_REGS_H
/*
* EP93xx linux memory map:
*
* virt phys size
* fe800000 5M per-platform mappings
* fed00000 80800000 2M APB
* fef00000 80000000 1M AHB
*/
#define EP93XX_AHB_PHYS_BASE 0x80000000
#define EP93XX_AHB_VIRT_BASE 0xfef00000
#define EP93XX_AHB_SIZE 0x00100000
#define EP93XX_APB_PHYS_BASE 0x80800000
#define EP93XX_APB_VIRT_BASE 0xfed00000
#define EP93XX_APB_SIZE 0x00200000
/* AHB peripherals */
#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000)
#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000)
#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000)
#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000)
#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000)
#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000)
#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000)
#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000)
#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000)
#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000)
/* APB peripherals */
#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000)
#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000)
#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000)
#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c)
#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac)
#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0)
#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4)
#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000)
#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000)
#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000)
#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000)
#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000)
#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000)
#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000)
#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04)
#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000
#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
#endif
/*
* linux/include/asm-arm/arch-ep93xx/gesbc9312.h
*/
/*
* linux/include/asm-arm/arch-ep93xx/gpio.h
*/
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
#define GPIO_IN 0
#define GPIO_OUT 1
#define EP93XX_GPIO_LOW 0
#define EP93XX_GPIO_HIGH 1
extern void gpio_line_config(int line, int direction);
extern int gpio_line_get(int line);
extern void gpio_line_set(int line, int value);
/* GPIO port A. */
#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)
#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1)
#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2)
#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3)
#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4)
#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5)
#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6)
#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7)
/* GPIO port B. */
#define EP93XX_GPIO_LINE_B(x) ((x) + 8)
#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0)
#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1)
#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2)
#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3)
#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4)
#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5)
#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6)
#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7)
/* GPIO port C. */
#define EP93XX_GPIO_LINE_C(x) ((x) + 16)
#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0)
#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1)
#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2)
#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3)
#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4)
#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5)
#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6)
#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7)
/* GPIO port D. */
#define EP93XX_GPIO_LINE_D(x) ((x) + 24)
#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0)
#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1)
#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2)
#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3)
#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4)
#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5)
#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6)
#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7)
/* GPIO port E. */
#define EP93XX_GPIO_LINE_E(x) ((x) + 32)
#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0)
#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1)
#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2)
#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3)
#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4)
#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5)
#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6)
#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7)
/* GPIO port F. */
#define EP93XX_GPIO_LINE_F(x) ((x) + 40)
#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0)
#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1)
#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2)
#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3)
#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4)
#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5)
#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6)
#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7)
/* GPIO port G. */
#define EP93XX_GPIO_LINE_G(x) ((x) + 48)
#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0)
#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1)
#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2)
#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3)
#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4)
#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5)
#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6)
#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7)
/* GPIO port H. */
#define EP93XX_GPIO_LINE_H(x) ((x) + 56)
#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0)
#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1)
#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2)
#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3)
#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4)
#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5)
#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6)
#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7)
#endif
/*
* linux/include/asm-arm/arch-ep93xx/hardware.h
*/
#include "ep93xx-regs.h"
#define pcibios_assign_all_busses() 0
#include "platform.h"
#include "gesbc9312.h"
#include "ts72xx.h"
/*
* linux/include/asm-arm/arch-ep93xx/io.h
*/
#define IO_SPACE_LIMIT 0xffffffff
#define __io(p) ((void __iomem *)(p))
#define __mem_pci(p) (p)
/*
* linux/include/asm-arm/arch-ep93xx/irqs.h
*/
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
#define IRQ_EP93XX_COMMRX 2
#define IRQ_EP93XX_COMMTX 3
#define IRQ_EP93XX_TIMER1 4
#define IRQ_EP93XX_TIMER2 5
#define IRQ_EP93XX_AACINTR 6
#define IRQ_EP93XX_DMAM2P0 7
#define IRQ_EP93XX_DMAM2P1 8
#define IRQ_EP93XX_DMAM2P2 9
#define IRQ_EP93XX_DMAM2P3 10
#define IRQ_EP93XX_DMAM2P4 11
#define IRQ_EP93XX_DMAM2P5 12
#define IRQ_EP93XX_DMAM2P6 13
#define IRQ_EP93XX_DMAM2P7 14
#define IRQ_EP93XX_DMAM2P8 15
#define IRQ_EP93XX_DMAM2P9 16
#define IRQ_EP93XX_DMAM2M0 17
#define IRQ_EP93XX_DMAM2M1 18
#define IRQ_EP93XX_GPIO0MUX 20
#define IRQ_EP93XX_GPIO1MUX 21
#define IRQ_EP93XX_GPIO2MUX 22
#define IRQ_EP93XX_GPIO3MUX 22
#define IRQ_EP93XX_UART1RX 23
#define IRQ_EP93XX_UART1TX 24
#define IRQ_EP93XX_UART2RX 25
#define IRQ_EP93XX_UART2TX 26
#define IRQ_EP93XX_UART3RX 27
#define IRQ_EP93XX_UART3TX 28
#define IRQ_EP93XX_KEY 29
#define IRQ_EP93XX_TOUCH 30
#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc
#define IRQ_EP93XX_EXT0 32
#define IRQ_EP93XX_EXT1 33
#define IRQ_EP93XX_EXT2 34
#define IRQ_EP93XX_64HZ 35
#define IRQ_EP93XX_WATCHDOG 36
#define IRQ_EP93XX_RTC 37
#define IRQ_EP93XX_IRDA 38
#define IRQ_EP93XX_ETHERNET 39
#define IRQ_EP93XX_EXT3 40
#define IRQ_EP93XX_PROG 41
#define IRQ_EP93XX_1HZ 42
#define IRQ_EP93XX_VSYNC 43
#define IRQ_EP93XX_VIDEO_FIFO 44
#define IRQ_EP93XX_SSP1RX 45
#define IRQ_EP93XX_SSP1TX 46
#define IRQ_EP93XX_GPIO4MUX 47
#define IRQ_EP93XX_GPIO5MUX 48
#define IRQ_EP93XX_GPIO6MUX 49
#define IRQ_EP93XX_GPIO7MUX 50
#define IRQ_EP93XX_TIMER3 51
#define IRQ_EP93XX_UART1 52
#define IRQ_EP93XX_SSP 53
#define IRQ_EP93XX_UART2 54
#define IRQ_EP93XX_UART3 55
#define IRQ_EP93XX_USB 56
#define IRQ_EP93XX_ETHERNET_PME 57
#define IRQ_EP93XX_DSP 58
#define IRQ_EP93XX_GPIO_AB 59
#define IRQ_EP93XX_SAI 60
#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff
#define IRQ_EP93XX_GPIO(x) (64 + (x))
#define NR_EP93XX_IRQS IRQ_EP93XX_GPIO(16)
#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
#define EP93XX_BOARD_IRQS 32
#define NR_IRQS (NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
#endif
/*
* linux/include/asm-arm/arch-ep93xx/memory.h
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#define __bus_to_virt(x) __phys_to_virt(x)
#define __virt_to_bus(x) __virt_to_phys(x)
#endif
/*
* linux/include/asm-arm/arch-ep93xx/platform.h
*/
#ifndef __ASSEMBLY__
void ep93xx_map_io(void);
void ep93xx_init_irq(void);
void ep93xx_init_time(unsigned long);
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
#endif
/*
* linux/include/asm-arm/arch-ep93xx/system.h
*/
#include <asm/hardware.h>
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode)
{
u32 devicecfg;
local_irq_disable();
devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
while (1)
;
}
/*
* linux/include/asm-arm/arch-ep93xx/timex.h
*/
#define CLOCK_TICK_RATE 983040
/*
* linux/include/asm-arm/arch-ep93xx/ts72xx.h
*/
/*
* TS72xx memory map:
*
* virt phys size
* febff000 22000000 4K model number register
* febfe000 22400000 4K options register
* febfd000 22800000 4K options register #2
* febfc000 [67]0000000 4K NAND data register
* febfb000 [67]0400000 4K NAND control register
* febfa000 [67]0800000 4K NAND busy register
*/
#define TS72XX_MODEL_PHYS_BASE 0x22000000
#define TS72XX_MODEL_VIRT_BASE 0xfebff000
#define TS72XX_MODEL_SIZE 0x00001000
#define TS72XX_MODEL_TS7200 0x00
#define TS72XX_MODEL_TS7250 0x01
#define TS72XX_MODEL_TS7260 0x02
#define TS72XX_OPTIONS_PHYS_BASE 0x22400000
#define TS72XX_OPTIONS_VIRT_BASE 0xfebfe000
#define TS72XX_OPTIONS_SIZE 0x00001000
#define TS72XX_OPTIONS_COM2_RS485 0x02
#define TS72XX_OPTIONS_MAX197 0x01
#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000
#define TS72XX_OPTIONS2_VIRT_BASE 0xfebfd000
#define TS72XX_OPTIONS2_SIZE 0x00001000
#define TS72XX_OPTIONS2_TS9420 0x04
#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
#define TS72XX_NOR_PHYS_BASE 0x60000000
#define TS72XX_NOR2_PHYS_BASE 0x62000000
#define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000
#define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000
#define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000
#define TS72XX_NAND_DATA_SIZE 0x00001000
#define TS72XX_NAND1_CONTROL_PHYS_BASE 0x60400000
#define TS72XX_NAND2_CONTROL_PHYS_BASE 0x70400000
#define TS72XX_NAND_CONTROL_VIRT_BASE 0xfebfb000
#define TS72XX_NAND_CONTROL_SIZE 0x00001000
#define TS72XX_NAND1_BUSY_PHYS_BASE 0x60800000
#define TS72XX_NAND2_BUSY_PHYS_BASE 0x70800000
#define TS72XX_NAND_BUSY_VIRT_BASE 0xfebfa000
#define TS72XX_NAND_BUSY_SIZE 0x00001000
#ifndef __ASSEMBLY__
#include <asm/io.h>
static inline int board_is_ts7200(void)
{
return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
}
static inline int board_is_ts7250(void)
{
return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
}
static inline int board_is_ts7260(void)
{
return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
}
static inline int is_max197_installed(void)
{
return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
TS72XX_OPTIONS_MAX197);
}
static inline int is_ts9420_installed(void)
{
return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
TS72XX_OPTIONS2_TS9420);
}
#endif
/*
* linux/include/asm-arm/arch-ep93xx/uncompress.h
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <asm/arch/ep93xx-regs.h>
static unsigned char __raw_readb(unsigned int ptr)
{
return *((volatile unsigned char *)ptr);
}
static void __raw_writeb(unsigned char value, unsigned int ptr)
{
*((volatile unsigned char *)ptr) = value;
}
#define PHYS_UART1_DATA 0x808c0000
#define PHYS_UART1_FLAG 0x808c0018
#define UART1_FLAG_TXFF 0x20
static __inline__ void putc(char c)
{
int i;
for (i = 0; i < 1000; i++) {
/* Transmit fifo not full? */
if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
break;
}
__raw_writeb(c, PHYS_UART1_DATA);
}
static void putstr(const char *s)
{
while (*s) {
putc(*s);
if (*s == '\n')
putc('\r');
s++;
}
}
#define arch_decomp_setup()
#define arch_decomp_wdog()
/*
* linux/include/asm-arm/arch-ep93xx/vmalloc.h
*/
#define VMALLOC_END 0xfe800000
/*
* include/asm-arm/arch-h720x/irq.h
*
* Copyright (C) 2000-2002 Jungjun Kim
* (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
* (C) 2003 Thomas Gleixner <tglx@linutronix.de>
*/
#ifndef __ASM_ARCH_IRQ_H
#define __ASM_ARCH_IRQ_H
extern void __init h720x_init_irq (void);
#endif /* __ASM_ARCH_IRQ_H */
/*
* linux/include/asm-arm/arch-h720x/param.h
*
* Copyright (C) 2000 Jungjun Kim
*/
#ifndef __ASM_ARCH_PARAM_H
#define __ASM_ARCH_PARAM_H
#endif
/*
* linux/include/asm-arm/arch-imxads/irq.h
*
* Copyright (C) 1999 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define fixup_irq(i) (i)
/*
* linux/include/asm-arm/arch-imx/param.h
*
* Copyright (C) 1999 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
......@@ -11,8 +11,6 @@
*
*/
#include <linux/amba/serial.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
......@@ -21,18 +19,4 @@
addne \rx, \rx, #0x16000000 >> 4
.endm
.macro senduart,rd,rx
strb \rd, [\rx, #UART01x_DR]
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
bne 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
bne 1001b
.endm
#include <asm/hardware/debug-pl01x.S>
/*
* linux/include/asm-arm/arch-integrator/param.h
*
* Copyright (C) 1999 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
......@@ -28,21 +28,8 @@
#endif
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1002: ldrb \rd, [\rx, #0x5]
and \rd, \rd, #0x60
teq \rd, #0x60
bne 1002b
.endm
.macro waituart,rd,rx
#if !defined(CONFIG_ARCH_IQ80321) || !defined(CONFIG_ARCH_IQ31244) || !defined(CONFIG_ARCH_IQ80331)
1001: ldrb \rd, [\rx, #0x6]
tst \rd, #0x10
beq 1001b
#define FLOW_CONTROL
#endif
.endm
#define UART_SHIFT 0
#include <asm/hardware/debug-8250.S>
/*
* linux/include/asm-arm/arch-iop3xx/param.h
*/
......@@ -23,18 +23,5 @@
#endif
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1002: ldrb \rd, [\rx, #0x14]
tst \rd, #0x20
beq 1002b
.endm
.macro waituart,rd,rx
nop
nop
nop
.endm
#define UART_SHIFT 2
#include <asm/hardware/debug-8250.S>
/*
* linux/include/asm-arm/arch-ixp2000/irq.h
*
* Copyright (C) 2002 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define fixup_irq(irq) (irq)
......@@ -72,12 +72,11 @@
#ifndef __ASSEMBLY__
/*
* Master NPU will always have flash and be PCI master.
* Slave NPU may or may not have flash but will never be PCI master.
* The master NPU is always PCI master.
*/
static inline unsigned int ixdp2x00_master_npu(void)
{
return ((ixp2000_has_flash()) && (ixp2000_is_pcimaster()));
return !!ixp2000_is_pcimaster();
}
/*
......
......@@ -353,8 +353,8 @@
* Masks and shifts for various fields in the WTC and RTC registers.
*/
#define SLOWPORT_WRTC_MASK_HD 0x0003
#define SLOWPORT_WRTC_MASK_SU 0x003c
#define SLOWPORT_WRTC_MASK_PW 0x03c0
#define SLOWPORT_WRTC_MASK_PW 0x003c
#define SLOWPORT_WRTC_MASK_SU 0x03c0
#define SLOWPORT_WRTC_SHIFT_HD 0x00
#define SLOWPORT_WRTC_SHIFT_SU 0x02
......
/*
* linux/include/asm-arm/arch-ixp2000/param.h
*/
......@@ -37,7 +37,7 @@ static inline void arch_reset(char mode)
* to cause a complete reset of the CPU and all external devices
* and move the flash bank register back to 0.
*/
if (machine_is_ixdp2801()) {
if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
......
......@@ -20,16 +20,5 @@
@ byte writes used - Big Endian.
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro waituart,rd,rx
1002: ldrb \rd, [\rx, #0x14]
and \rd, \rd, #0x60 @ check THRE and TEMT bits
teq \rd, #0x60
bne 1002b
.endm
.macro busyuart,rd,rx
.endm
#define UART_SHIFT 2
#include <asm/hardware/debug-8250.S>
/*
* irq.h
*
* Copyright (C) 2002 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#define fixup_irq(irq) (irq)
/*
* linux/include/asm-arm/arch-ixp4xx/param.h
*/
......@@ -38,6 +38,33 @@ extern unsigned long ixp4xx_exp_bus_size;
#define IXP4XX_EXP_BUS_BASE(region)\
(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
#define IXP4XX_EXP_BUS_END(region)\
(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
/* Those macros can be used to adjust timing and configure
* other features for each region.
*/
#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16)
#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20)
#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22)
#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26)
#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28)
#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10)
#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14)
#define IXP4XX_EXP_BUS_CS_EN (1L << 31)
#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6)
#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5)
#define IXP4XX_EXP_BUS_MUX_EN (1L << 4)
#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3)
#define IXP4XX_EXP_BUS_WR_EN (1L << 1)
#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0)
#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00
#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01
#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02
#define IXP4XX_FLASH_WRITABLE (0x2)
#define IXP4XX_FLASH_DEFAULT (0xbcd23c40)
#define IXP4XX_FLASH_WRITE (0xbcd23c42)
......
/*
* linux/include/asm-arm/arch-l7200/param.h
*
* Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
* Steve Hill (sjhill@cotw.com)
*
* This file contains the hardware definitions for the
* LinkUp Systems L7200 SOC development board.
*
* Changelog:
* 04-21-2000 RS Created L7200 version
* 04-25-2000 SJH Cleaned up file
* 05-03-2000 SJH Change comments and rate
*/
/*
* See 'time.h' for how the RTC HZ rate is set
*/
#define HZ 128
/* include/asm-arm/arch-lh7a40x/irq.h
*
* Copyright (C) 2004 Logic Product Development
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*/
void __init lh7a40x_init_board_irq (void);
/* include/asm-arm/arch-lh7a40x/param.h
*
* Copyright (C) 2004 Coastal Environmental Systems
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*/
/*
* linux/include/asm-arm/arch-omap/param.h
*
*/
#ifdef CONFIG_OMAP_32K_TIMER_HZ
#define HZ CONFIG_OMAP_32K_TIMER_HZ
#endif
......@@ -21,18 +21,5 @@
orr \rx, \rx, #0x00100000
.endm
.macro senduart,rd,rx
str \rd, [\rx, #0]
.endm
.macro busyuart,rd,rx
1002: ldr \rd, [\rx, #0x14]
tst \rd, #(1 << 6)
beq 1002b
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x14]
tst \rd, #(1 << 5)
beq 1001b
.endm
#define UART_SHIFT 2
#include <asm/hardware/debug-8250.S>
/*
* linux/include/asm-arm/arch-pxa/irq.h
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define fixup_irq(x) (x)
/*
* linux/include/asm-arm/arch-pxa/param.h
*/
......@@ -11,8 +11,6 @@
*
*/
#include <linux/amba/serial.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
......@@ -21,18 +19,4 @@
orr \rx, \rx, #0x00009000
.endm
.macro senduart,rd,rx
strb \rd, [\rx, #UART01x_DR]
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
bne 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
bne 1001b
.endm
#include <asm/hardware/debug-pl01x.S>
/*
* linux/include/asm-arm/arch-realview/param.h
*
* Copyright (C) 2002 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
......@@ -20,19 +20,6 @@
orr \rx, \rx, #0x00000fe0
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
1001: ldrb \rd, [\rx, #0x14]
and \rd, \rd, #0x60
teq \rd, #0x60
bne 1001b
.endm
.macro waituart,rd,rx
1001: ldrb \rd, [\rx, #0x18]
tst \rd, #0x10
beq 1001b
.endm
#define UART_SHIFT 2
#define FLOW_CONTROL
#include <asm/hardware/debug-8250.S>
/*
* linux/include/asm-arm/arch-rpc/param.h
*/
/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h
*
* (c) 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
* OSIRIS - CPLD control constants
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_OSIRISCPLD_H
#define __ASM_ARCH_OSIRISCPLD_H
/* CTRL1 - NAND WP control */
#define OSIRIS_CTRL1_NANDSEL (0x3)
#define OSIRIS_CTRL1_BOOT_INT (1<<3)
#define OSIRIS_CTRL1_PCMCIA (1<<4)
#define OSIRIS_CTRL1_PCMCIA_nWAIT (1<<6)
#define OSIRIS_CTRL1_PCMCIA_nIOIS16 (1<<7)
#endif /* __ASM_ARCH_OSIRISCPLD_H */
/* linux/include/asm-arm/arch-s3c2410/osiris-map.h
*
* (c) 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
* OSIRIS - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
*/
/* needs arch/map.h including with this */
#ifndef __ASM_ARCH_OSIRISMAP_H
#define __ASM_ARCH_OSIRISMAP_H
/* start peripherals off after the S3C2410 */
#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x05000000))
#define OSIRIS_PA_CPLD (S3C2410_CS1 | (3<<25))
/* we put the CPLD registers next, to get them out of the way */
#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00000000) /* 0x01300000 */
#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD)
#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00100000) /* 0x01400000 */
#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (1<<24))
#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00200000) /* 0x01500000 */
#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<24))
#define OSIRIS_VA_CTRL4 OSIRIS_IOADDR(0x00300000) /* 0x01600000 */
#define OSIRIS_PA_CTRL4 (OSIRIS_PA_CPLD + (3<<24))
#endif /* __ASM_ARCH_OSIRISMAP_H */
/* linux/include/asm-arm/arch-s3c2410/param.h
*
* (c) 2003 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - Machine parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 02-Sep-2003 BJD Created file
* 12-Mar-2004 BJD Added include protection
*/
#ifndef __ASM_ARCH_PARAM_H
#define __ASM_ARCH_PARAM_H
/* we cannot get our timer down to 100Hz with the setup as is, but we can
* manage 200 clock ticks per second... if this is a problem, we can always
* add a software pre-scaler to the evil timer systems.
*/
#define HZ 200
#endif /* __ASM_ARCH_PARAM_H */
......@@ -979,6 +979,7 @@
#define S3C2410_MISCCR_CLK0_HCLK (3<<4)
#define S3C2410_MISCCR_CLK0_PCLK (4<<4)
#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4)
#define S3C2410_MISCCR_CLK0_MASK (7<<4)
#define S3C2410_MISCCR_CLK1_MPLL (0<<8)
#define S3C2410_MISCCR_CLK1_UPLL (1<<8)
......@@ -986,6 +987,7 @@
#define S3C2410_MISCCR_CLK1_HCLK (3<<8)
#define S3C2410_MISCCR_CLK1_PCLK (4<<8)
#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8)
#define S3C2410_MISCCR_CLK1_MASK (7<<8)
#define S3C2410_MISCCR_USBSUSPND0 (1<<12)
#define S3C2410_MISCCR_USBSUSPND1 (1<<13)
......
......@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*
*/
#include <asm/hardware.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
......
/*
* linux/include/asm-arm/arch-sa1100/param.h
*/
/*
* linux/include/asm-arm/arch-shark/param.h
*
* by Alexander Schulz
*/
......@@ -11,8 +11,6 @@
*
*/
#include <linux/amba/serial.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
......@@ -22,18 +20,4 @@
orr \rx, \rx, #0x00001000
.endm
.macro senduart,rd,rx
strb \rd, [\rx, #UART01x_DR]
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
bne 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
bne 1001b
.endm
#include <asm/hardware/debug-pl01x.S>
/*
* linux/include/asm-arm/arch-versatile/param.h
*
* Copyright (C) 2002 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
......@@ -6,6 +6,8 @@
#ifndef __ASM_ARM_DELAY_H
#define __ASM_ARM_DELAY_H
#include <asm/param.h> /* HZ */
extern void __delay(int loops);
/*
......@@ -13,7 +15,7 @@ extern void __delay(int loops);
* it, it means that you're calling udelay() with an out of range value.
*
* With currently imposed limits, this means that we support a max delay
* of 2000us and 671 bogomips
* of 2000us. Further limits: HZ<=1000 and bogomips<=3355
*/
extern void __bad_udelay(void);
......@@ -35,7 +37,7 @@ extern void __const_udelay(unsigned long);
#define udelay(n) \
(__builtin_constant_p(n) ? \
((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \
__const_udelay((n) * 0x68dbul)) : \
__const_udelay((n) * ((2199023U*HZ)>>11))) : \
__udelay(n))
#endif /* defined(_ARM_DELAY_H) */
......
/*
* linux/include/asm-arm/hardware/debug-8250.h
*
* Copyright (C) 1994-1999 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/serial_reg.h>
.macro senduart,rd,rx
strb \rd, [\rx, #UART_TX << UART_SHIFT]
.endm
.macro busyuart,rd,rx
1002: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
bne 1002b
.endm
.macro waituart,rd,rx
#ifdef FLOW_CONTROL
1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
tst \rd, #UART_MSR_CTS
beq 1001b
#endif
.endm
/* linux/include/asm-arm/arch-integrator/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/amba/serial.h>
.macro senduart,rd,rx
strb \rd, [\rx, #UART01x_DR]
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #UART01x_FR]
tst \rd, #UART01x_FR_TXFF
bne 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #UART01x_FR]
tst \rd, #UART01x_FR_BUSY
bne 1001b
.endm
......@@ -39,7 +39,7 @@
#define VIC_VECT_CNTL_ENABLE (1 << 5)
#ifndef __ASSEMBLY__
void vic_init(void __iomem *base, u32 vic_sources);
void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
#endif
#endif
......@@ -10,19 +10,16 @@
#ifndef __ASSEMBLY__
#include <linux/compiler.h>
struct tag;
struct meminfo;
struct sys_timer;
struct machine_desc {
/*
* Note! The first five elements are used
* Note! The first four elements are used
* by assembler code in head-armv.S
*/
unsigned int nr; /* architecture number */
unsigned int __deprecated phys_ram; /* start of physical ram */
unsigned int phys_io; /* start of physical io */
unsigned int io_pg_offst; /* byte offset for io
* page tabe entry */
......
......@@ -61,7 +61,7 @@ struct irqdesc {
struct irqchip *chip;
struct irqaction *action;
struct list_head pend;
void *chipdata;
void __iomem *base;
void *data;
unsigned int disable_depth;
......@@ -74,6 +74,7 @@ struct irqdesc {
unsigned int noautoenable : 1; /* don't automatically enable IRQ */
unsigned int unused :25;
unsigned int irqs_unhandled;
struct proc_dir_entry *procdir;
#ifdef CONFIG_SMP
......@@ -113,8 +114,8 @@ void __set_irq_handler(unsigned int irq, irq_handler_t, int);
#define set_irq_handler(irq,handler) __set_irq_handler(irq,handler,0)
#define set_irq_chained_handler(irq,handler) __set_irq_handler(irq,handler,1)
#define set_irq_data(irq,d) do { irq_desc[irq].data = d; } while (0)
#define set_irq_chipdata(irq,d) do { irq_desc[irq].chipdata = d; } while (0)
#define get_irq_chipdata(irq) (irq_desc[irq].chipdata)
#define set_irq_chipdata(irq,d) do { irq_desc[irq].base = d; } while (0)
#define get_irq_chipdata(irq) (irq_desc[irq].base)
void set_irq_chip(unsigned int irq, struct irqchip *);
void set_irq_flags(unsigned int irq, unsigned int flags);
......
......@@ -11,12 +11,7 @@
#define __ASM_PARAM_H
#ifdef __KERNEL__
# include <asm/arch/param.h> /* for kernel version of HZ */
# ifndef HZ
# define HZ 100 /* Internal kernel timer frequency */
# endif
# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* User interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment