Commit 59200df5 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

Staging: dt3155: fix wait_ibsyclr function

The wait_ibsyclr function is supposed to return the status of the I2C
cycle.  Currently it will always return FALSE because the IIC_CSR2
register is not re-read in order to update the cached register value.
This results in the NEW_CYCLE bit still being 1.

The current code actually works correctly only because the return
value of {Read|Write}I2C is not checked in the driver.

Fix wait_ibsyclr by actually reading the IIC_CSR2 register to get the
updated status.  While here, change the return type to be an actual
errno instead of the private TRUE/FALSE define and remove the now
obvious comments about the return value.

Also, remove the local variable 'writestat' in WriteI2C and just
return the result of wait_ibsyclr.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 09a3c4ae
......@@ -74,23 +74,22 @@ u8 i2c_pm_lut_data;
* wait_ibsyclr()
*
* This function handles read/write timing and r/w timeout error
*
* Returns TRUE if NEW_CYCLE clears
* Returns FALSE if NEW_CYCLE doesn't clear in roughly 3 msecs, otherwise
* returns 0
*/
static int wait_ibsyclr(u8 *lpReg)
{
/* wait 100 microseconds */
udelay(100L);
/* __delay(loops_per_sec/10000); */
ReadMReg(lpReg + IIC_CSR2, iic_csr2_r.reg);
if (iic_csr2_r.fld.NEW_CYCLE) {
/* if NEW_CYCLE didn't clear */
/* TIMEOUT ERROR */
dt3155_errno = DT_ERR_I2C_TIMEOUT;
return FALSE;
} else
return TRUE; /* no error */
return -ETIMEDOUT;
}
return 0; /* no error */
}
/*
......@@ -101,14 +100,9 @@ static int wait_ibsyclr(u8 *lpReg)
* 1st parameter is pointer to 32-bit register base address
* 2nd parameter is reg. index;
* 3rd is value to be written
*
* Returns TRUE - Successful completion
* FALSE - Timeout error - cycle did not complete!
*/
int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal)
{
int writestat; /* status for return */
/* read 32 bit IIC_CSR2 register data into union */
ReadMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
......@@ -126,8 +120,7 @@ int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal)
WriteMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
/* wait for IIC cycle to finish */
writestat = wait_ibsyclr(lpReg);
return writestat;
return wait_ibsyclr(lpReg);
}
/*
......@@ -138,9 +131,6 @@ int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal)
* 1st parameter is pointer to 32-bit register base address
* 2nd parameter is reg. index;
* 3rd is adrs of value to be read
*
* Returns TRUE - Successful completion
* FALSE - Timeout error - cycle did not complete!
*/
int ReadI2C(u8 *lpReg, u_short wIregIndex, u8 *byVal)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment