Merge tag 'for-linus-20181115' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - Discard loop fix, caused by integer overflow (Dave)

 - Blacklist of Samsung drive that hangs with power management (Diego)

 - Copy bio priority when cloning it (Hannes)

 - Fix race condition exposed in floppy (me)

 - Fix SCSI queue cleanup regression. While elusive, it caused oopses in
   queue running (Ming)

 - Fix bad string copy in kyber tracing (Omar)

* tag 'for-linus-20181115' of git://git.kernel.dk/linux-block:
  SCSI: fix queue cleanup race before queue initialization is done
  block: fix 32 bit overflow in __blkdev_issue_discard()
  libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD
  block: copy ioprio in __bio_clone_fast() and bounce
  kyber: fix wrong strlcpy() size in trace_kyber_latency()
  floppy: fix race condition in __floppy_read_block_0()

block/bio.c

@@ -605,6 +605,7 @@ void __bio_clone_fast(struct bio *bio, struct bio *bio_src)
 	if (bio_flagged(bio_src, BIO_THROTTLED))
 		bio_set_flag(bio, BIO_THROTTLED);
 	bio->bi_opf = bio_src->bi_opf;
+	bio->bi_ioprio = bio_src->bi_ioprio;
 	bio->bi_write_hint = bio_src->bi_write_hint;
 	bio->bi_iter = bio_src->bi_iter;
 	bio->bi_io_vec = bio_src->bi_io_vec;

block/blk-core.c

@@ -798,9 +798,8 @@ void blk_cleanup_queue(struct request_queue *q)
 	 * dispatch may still be in-progress since we dispatch requests
 	 * from more than one contexts.
 	 *
-	 * No need to quiesce queue if it isn't initialized yet since
-	 * blk_freeze_queue() should be enough for cases of passthrough
-	 * request.
+	 * We rely on driver to deal with the race in case that queue
+	 * initialization isn't done.
 	 */
 	if (q->mq_ops && blk_queue_init_done(q))
 		blk_mq_quiesce_queue(q);

block/blk-lib.c

@@ -55,9 +55,11 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 		return -EINVAL;
 
 	while (nr_sects) {
-		unsigned int req_sects = min_t(unsigned int, nr_sects,
+		sector_t req_sects = min_t(sector_t, nr_sects,
 				bio_allowed_max_sectors(q));
 
+		WARN_ON_ONCE((req_sects << 9) > UINT_MAX);
+
 		bio = blk_next_bio(bio, 0, gfp_mask);
 		bio->bi_iter.bi_sector = sector;
 		bio_set_dev(bio, bdev);

block/bounce.c

@@ -248,6 +248,7 @@ static struct bio *bounce_clone_bio(struct bio *bio_src, gfp_t gfp_mask,
 		return NULL;
 	bio->bi_disk		= bio_src->bi_disk;
 	bio->bi_opf		= bio_src->bi_opf;
+	bio->bi_ioprio		= bio_src->bi_ioprio;
 	bio->bi_write_hint	= bio_src->bi_write_hint;
 	bio->bi_iter.bi_sector	= bio_src->bi_iter.bi_sector;
 	bio->bi_iter.bi_size	= bio_src->bi_iter.bi_size;

drivers/ata/libata-core.c

@@ -4553,7 +4553,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	/* These specific Samsung models/firmware-revs do not handle LPM well */
 	{ "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },
 	{ "SAMSUNG SSD PM830 mSATA *",  "CXM13D1Q", ATA_HORKAGE_NOLPM, },
-	{ "SAMSUNG MZ7TD256HAFV-000L9", "DXT02L5Q", ATA_HORKAGE_NOLPM, },
+	{ "SAMSUNG MZ7TD256HAFV-000L9", NULL,       ATA_HORKAGE_NOLPM, },
 
 	/* devices that don't properly handle queued TRIM commands */
 	{ "Micron_M500IT_*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |

drivers/block/floppy.c

@@ -4148,10 +4148,11 @@ static int __floppy_read_block_0(struct block_device *bdev, int drive)
 	bio.bi_end_io = floppy_rb0_cb;
 	bio_set_op_attrs(&bio, REQ_OP_READ, 0);
 
+	init_completion(&cbdata.complete);
+
 	submit_bio(&bio);
 	process_fd_request();
 
-	init_completion(&cbdata.complete);
 	wait_for_completion(&cbdata.complete);
 
 	__free_page(page);

drivers/scsi/scsi_lib.c

@@ -697,6 +697,12 @@ static bool scsi_end_request(struct request *req, blk_status_t error,
 		 */
 		scsi_mq_uninit_cmd(cmd);
 
+		/*
+		 * queue is still alive, so grab the ref for preventing it
+		 * from being cleaned up during running queue.
+		 */
+		percpu_ref_get(&q->q_usage_counter);
+
 		__blk_mq_end_request(req, error);
 
 		if (scsi_target(sdev)->single_lun ||
@@ -704,6 +710,8 @@ static bool scsi_end_request(struct request *req, blk_status_t error,
 			kblockd_schedule_work(&sdev->requeue_work);
 		else
 			blk_mq_run_hw_queues(q, true);
+
+		percpu_ref_put(&q->q_usage_counter);
 	} else {
 		unsigned long flags;
 

include/trace/events/kyber.h

@@ -31,8 +31,8 @@ TRACE_EVENT(kyber_latency,
 
 	TP_fast_assign(
 		__entry->dev		= disk_devt(dev_to_disk(kobj_to_dev(q->kobj.parent)));
-		strlcpy(__entry->domain, domain, DOMAIN_LEN);
-		strlcpy(__entry->type, type, DOMAIN_LEN);
+		strlcpy(__entry->domain, domain, sizeof(__entry->domain));
+		strlcpy(__entry->type, type, sizeof(__entry->type));
 		__entry->percentile	= percentile;
 		__entry->numerator	= numerator;
 		__entry->denominator	= denominator;
@@ -60,7 +60,7 @@ TRACE_EVENT(kyber_adjust,
 
 	TP_fast_assign(
 		__entry->dev		= disk_devt(dev_to_disk(kobj_to_dev(q->kobj.parent)));
-		strlcpy(__entry->domain, domain, DOMAIN_LEN);
+		strlcpy(__entry->domain, domain, sizeof(__entry->domain));
 		__entry->depth		= depth;
 	),
 
@@ -82,7 +82,7 @@ TRACE_EVENT(kyber_throttled,
 
 	TP_fast_assign(
 		__entry->dev		= disk_devt(dev_to_disk(kobj_to_dev(q->kobj.parent)));
-		strlcpy(__entry->domain, domain, DOMAIN_LEN);
+		strlcpy(__entry->domain, domain, sizeof(__entry->domain));
 	),
 
 	TP_printk("%d,%d %s", MAJOR(__entry->dev), MINOR(__entry->dev),