Commit 59b559d7 authored by Srinidhi Kasagar's avatar Srinidhi Kasagar Committed by Russell King

ARM: 5786/1: Introduce plat-nomadik, MTU code re-organization

Introduce the plat-nomadik folder for ST-Ericsson
machines including the existing nomadik 8815 architecture.
This also moves the existing MTU (MultiTimerUnit)
of nomadik 8815 to the proposed plat-nomadik and adds
HAS_MTU. The patch has been re-based to 2.6.32-rc6
Signed-off-by: default avatarsrinidhi kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: default avatarAlessandro Rubini <rubini@unipv.it>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent a8a8a669
......@@ -787,6 +787,7 @@ source "arch/arm/mach-at91/Kconfig"
source "arch/arm/plat-mxc/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/plat-nomadik/Kconfig"
source "arch/arm/mach-netx/Kconfig"
......
......@@ -176,6 +176,7 @@ machine-$(CONFIG_ARCH_MXC91231) := mxc91231
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
......
......@@ -5,13 +5,13 @@ menu "Nomadik boards"
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
select NOMADIK_8815
select HAS_MTU
endmenu
config NOMADIK_8815
bool
config I2C_BITBANG_8815NHK
tristate "Driver for bit-bang busses found on the 8815 NHK"
depends on I2C && MACH_NOMADIK_8815NHK
......
......@@ -7,7 +7,7 @@
# Object file lists.
obj-y += clock.o timer.o gpio.o
obj-y += clock.o gpio.o
# Cpu revision
obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
......
......@@ -25,11 +25,18 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <plat/mtu.h>
#include <mach/setup.h>
#include <mach/nand.h>
#include <mach/fsmc.h>
#include "clock.h"
/* Initial value for SRC control register: all timers use MXTAL/8 source */
#define SRC_CR_INIT_MASK 0x00007fff
#define SRC_CR_INIT_VAL 0x2aaa8000
/* These adresses span 16MB, so use three individual pages */
static struct resource nhk8815_nand_resources[] = {
{
......@@ -239,6 +246,26 @@ static struct platform_device *nhk8815_platform_devices[] __initdata = {
/* will add more devices */
};
static void __init nomadik_timer_init(void)
{
u32 src_cr;
/* Configure timer sources in "system reset controller" ctrl reg */
src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
src_cr &= SRC_CR_INIT_MASK;
src_cr |= SRC_CR_INIT_VAL;
writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
/* Save global pointer to mtu, used by platform timer code */
mtu_base = io_p2v(NOMADIK_MTU0_BASE);
nmdk_timer_init();
}
static struct sys_timer nomadik_timer = {
.init = nomadik_timer_init,
};
static void __init nhk8815_platform_init(void)
{
int i;
......
......@@ -15,7 +15,7 @@
extern void cpu8815_map_io(void);
extern void cpu8815_platform_init(void);
extern void cpu8815_init_irq(void);
extern struct sys_timer nomadik_timer;
extern void nmdk_timer_init(void);
#endif /* NOMADIK_8815 */
......
# We keep common IP's here for Nomadik and other similar
# familiy of processors from ST-Ericsson. At the moment we have
# just MTU, others to follow soon.
config PLAT_NOMADIK
bool
depends on ARCH_NOMADIK
default y
help
Common platform code for Nomadik and other ST-Ericsson
platforms.
if PLAT_NOMADIK
config HAS_MTU
bool
help
Support for Multi Timer Unit. MTU provides access
to multiple interrupt generating programmable
32-bit free running decrementing counters.
endif
# arch/arm/plat-nomadik/Makefile
# Copyright 2009 ST-Ericsson
# Licensed under GPLv2
obj-$(CONFIG_HAS_MTU) += timer.o
#ifndef __ASM_ARCH_MTU_H
#define __ASM_ARCH_MTU_H
#ifndef __PLAT_MTU_H
#define __PLAT_MTU_H
/* should be set by the platform code */
extern void __iomem *mtu_base;
/*
* The MTU device hosts four different counters, with 4 set of
......@@ -41,5 +44,5 @@
#define MTU_PCELL2 0xff8
#define MTU_PCELL3 0xffC
#endif /* __ASM_ARCH_MTU_H */
#endif /* __PLAT_MTU_H */
......@@ -15,19 +15,14 @@
#include <linux/clockchips.h>
#include <linux/jiffies.h>
#include <asm/mach/time.h>
#include <mach/mtu.h>
#define TIMER_CTRL 0x80 /* No divisor */
#define TIMER_PERIODIC 0x40
#define TIMER_SZ32BIT 0x02
/* Initial value for SRC control register: all timers use MXTAL/8 source */
#define SRC_CR_INIT_MASK 0x00007fff
#define SRC_CR_INIT_VAL 0x2aaa8000
#include <plat/mtu.h>
static u32 nmdk_count; /* accumulated count */
static u32 nmdk_cycle; /* write-once */
static __iomem void *mtu_base;
/* setup by the platform code */
void __iomem *mtu_base;
/*
* clocksource: the MTU device is a decrementing counters, so we negate
......@@ -93,7 +88,7 @@ static struct clock_event_device nmdk_clkevt = {
static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
{
/* ack: "interrupt clear register" */
writel( 1 << 0, mtu_base + MTU_ICR);
writel(1 << 0, mtu_base + MTU_ICR);
/* we can't count lost ticks, unfortunately */
nmdk_count += nmdk_cycle;
......@@ -125,24 +120,14 @@ static void nmdk_timer_reset(void)
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
}
static void __init nmdk_timer_init(void)
void __init nmdk_timer_init(void)
{
u32 src_cr;
unsigned long rate;
int bits;
rate = CLOCK_TICK_RATE; /* 2.4MHz */
nmdk_cycle = (rate + HZ/2) / HZ;
/* Configure timer sources in "system reset controller" ctrl reg */
src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
src_cr &= SRC_CR_INIT_MASK;
src_cr |= SRC_CR_INIT_VAL;
writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
/* Save global pointer to mtu, used by functions above */
mtu_base = io_p2v(NOMADIK_MTU0_BASE);
/* Init the timer and register clocksource */
nmdk_timer_reset();
......@@ -150,7 +135,9 @@ static void __init nmdk_timer_init(void)
bits = 8*sizeof(nmdk_count);
nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
clocksource_register(&nmdk_clksrc);
if (clocksource_register(&nmdk_clksrc))
printk(KERN_ERR "timer: failed to initialize clock "
"source %s\n", nmdk_clksrc.name);
/* Register irq and clockevents */
setup_irq(IRQ_MTU0, &nmdk_timer_irq);
......@@ -158,7 +145,3 @@ static void __init nmdk_timer_init(void)
nmdk_clkevt.cpumask = cpumask_of(0);
clockevents_register_device(&nmdk_clkevt);
}
struct sys_timer nomadik_timer = {
.init = nmdk_timer_init,
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment