pinctrl: meson-gxl: add tsin_a pins

Add Tsin A pins to bank DV and X.
We don't have a driver for the tsin yet but since the tsin A pinmux is
enabled by default at boot time, declaring this pinmux is required to
properly operate on GPIOX.

Without this change, GPIOX 8, 9, 10 and 11 can't be driven as GPIO output
as the tsin A seems to have priority.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/meson/pinctrl-meson-gxl.c

@@ -243,6 +243,25 @@ static const unsigned int spdif_out_h_pins[]	= { PIN(GPIOH_4, EE_OFF) };
 static const unsigned int eth_link_led_pins[]	= { PIN(GPIOZ_14, EE_OFF) };
 static const unsigned int eth_act_led_pins[]	= { PIN(GPIOZ_15, EE_OFF) };
 
+static const unsigned int tsin_a_d0_pins[]	= { PIN(GPIODV_0, EE_OFF) };
+static const unsigned int tsin_a_d0_x_pins[]	= { PIN(GPIOX_10, EE_OFF) };
+static const unsigned int tsin_a_clk_pins[]	= { PIN(GPIODV_8, EE_OFF) };
+static const unsigned int tsin_a_clk_x_pins[]	= { PIN(GPIOX_11, EE_OFF) };
+static const unsigned int tsin_a_sop_pins[]	= { PIN(GPIODV_9, EE_OFF) };
+static const unsigned int tsin_a_sop_x_pins[]	= { PIN(GPIOX_8, EE_OFF) };
+static const unsigned int tsin_a_d_valid_pins[]	= { PIN(GPIODV_10, EE_OFF) };
+static const unsigned int tsin_a_d_valid_x_pins[] = { PIN(GPIOX_9, EE_OFF) };
+static const unsigned int tsin_a_fail_pins[]	= { PIN(GPIODV_11, EE_OFF) };
+static const unsigned int tsin_a_dp_pins[] = {
+	PIN(GPIODV_1, EE_OFF),
+	PIN(GPIODV_2, EE_OFF),
+	PIN(GPIODV_3, EE_OFF),
+	PIN(GPIODV_4, EE_OFF),
+	PIN(GPIODV_5, EE_OFF),
+	PIN(GPIODV_6, EE_OFF),
+	PIN(GPIODV_7, EE_OFF),
+};
+
 static const struct pinctrl_pin_desc meson_gxl_aobus_pins[] = {
 	MESON_PIN(GPIOAO_0, 0),
 	MESON_PIN(GPIOAO_1, 0),
@@ -421,6 +440,10 @@ static struct meson_pmx_group meson_gxl_periphs_groups[] = {
 	GROUP(spi_miso,		5,	2),
 	GROUP(spi_ss0,		5,	1),
 	GROUP(spi_sclk,		5,	0),
+	GROUP(tsin_a_sop_x,	6,	3),
+	GROUP(tsin_a_d_valid_x,	6,	2),
+	GROUP(tsin_a_d0_x,	6,	1),
+	GROUP(tsin_a_clk_x,	6,	0),
 
 	/* Bank Z */
 	GROUP(eth_mdio,		4,	23),
@@ -469,6 +492,12 @@ static struct meson_pmx_group meson_gxl_periphs_groups[] = {
 	GROUP(i2c_sck_c,	1,	10),
 	GROUP(pwm_b,		2,	11),
 	GROUP(pwm_d,		2,	12),
+	GROUP(tsin_a_d0,	2,	4),
+	GROUP(tsin_a_dp,	2,	3),
+	GROUP(tsin_a_clk,	2,	2),
+	GROUP(tsin_a_sop,	2,	1),
+	GROUP(tsin_a_d_valid,	2,	0),
+	GROUP(tsin_a_fail,	1,	31),
 
 	/* Bank BOOT */
 	GROUP(emmc_nand_d07,	7,	31),
@@ -675,6 +704,12 @@ static const char * const eth_led_groups[] = {
 	"eth_link_led", "eth_act_led",
 };
 
+static const char * const tsin_a_groups[] = {
+	"tsin_a_clk", "tsin_a_clk_x", "tsin_a_sop", "tsin_a_sop_x",
+	"tsin_a_d_valid", "tsin_a_d_valid_x", "tsin_a_d0", "tsin_a_d0_x",
+	"tsin_a_dp", "tsin_a_fail",
+};
+
 static const char * const gpio_aobus_groups[] = {
 	"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
 	"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -747,6 +782,7 @@ static struct meson_pmx_func meson_gxl_periphs_functions[] = {
 	FUNCTION(i2s_out),
 	FUNCTION(spdif_out),
 	FUNCTION(eth_led),
+	FUNCTION(tsin_a),
 };
 
 static struct meson_pmx_func meson_gxl_aobus_functions[] = {