Commit 5ae8cb95 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Staging: wlags49: build fixes

Now that the code actually gets selected in the kernel config
properly, all of the build errors start showing up.

This patch papers over a few of them to get the code to build, I have
no idea if it actually works now or not...

Cc: Henk de Groot <pe1dnn@amsat.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 83e13438
......@@ -286,14 +286,14 @@ int i;
fw->signature[i+1] != (/* HCF_BIG_ENDIAN ? 'B' : */ 'L'))
rc = DHF_ERR_INCOMP_FW;
else { /* Little Endian Binary format */
fw->codep = (CFG_PROG_STRCT FAR*)((PSEUDO_CHARP)fw->codep + (hcf_32)fw);
fw->identity = (CFG_IDENTITY_STRCT FAR*)((PSEUDO_CHARP)fw->identity + (hcf_32)fw);
fw->compat = (CFG_RANGE20_STRCT FAR*)((PSEUDO_CHARP)fw->compat + (hcf_32)fw);
fw->codep = (CFG_PROG_STRCT FAR*)((char *)fw->codep + (hcf_32)fw);
fw->identity = (CFG_IDENTITY_STRCT FAR*)((char *)fw->identity + (hcf_32)fw);
fw->compat = (CFG_RANGE20_STRCT FAR*)((char *)fw->compat + (hcf_32)fw);
for (i = 0; fw->p[i]; i++)
fw->p[i] = ((PSEUDO_CHARP)fw->p[i] + (hcf_32)fw);
fw->p[i] = ((char *)fw->p[i] + (hcf_32)fw);
p = fw->codep;
while (p->len) {
p->host_addr = (PSEUDO_CHARP)p->host_addr + (hcf_32)fw;
p->host_addr = (char *)p->host_addr + (hcf_32)fw;
p++;
}
}
......
......@@ -157,14 +157,14 @@ static int wl_adapter_attach(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
link->io.IOAddrLines = 6;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
// link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
link->irq.Handler = &wl_isr;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 5;
link->conf.Present = PRESENT_OPTION;
link->priv = link->irq.Instance = dev;
link->priv = dev;
lp = wl_priv(dev);
lp->link = link;
......@@ -317,15 +317,15 @@ void wl_adapter_insert( struct pcmcia_device *link )
/* Do we need to allocate an interrupt? */
link->conf.Attributes |= CONF_ENABLE_IRQ;
CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
// CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
// CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
// CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
SET_NETDEV_DEV(dev, &handle_to_dev(link));
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
printk("%s: register_netdev() failed\n", MODULE_NAME);
goto failed;
......@@ -345,7 +345,7 @@ void wl_adapter_insert( struct pcmcia_device *link )
cs_failed:
cs_error( link, last_fn, last_ret );
// cs_error( link, last_fn, last_ret );
failed:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment