Skip to content

L
linux
Commit 5bb575bc authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 

Pull ARM SoC fixes from Olof Johansson:
 "Here's the first batch of fixes for this release cycle.

  Main diffstat here is the re-deletion of netx. I messed up and most
  likely didn't remove the files from the index when I test-merged this
  and saw conflicts, and from there on out 'git rerere' remembered the
  mistake and I missed checking it. Here it's done again as expected.

  Besides that:

   - A defconfig refresh + enabling of new drivers for u8500

   - i.MX fixlets for i2c/SAI/pinmux

   - sleep.S build fix for Davinci

   - Broadcom devicetree build/warning fix"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: defconfig: u8500: Add new drivers
  ARM: defconfig: u8500: Refresh defconfig
  ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux
  ARM: davinci: fix sleep.S build error on ARMv4
  arm64: dts: imx8mq: fix SAI compatible
  arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
  ARM: dts: imx6ul: fix clock frequency property name of I2C buses
  ARM: Delete netx a second time
  ARM: dts: imx7ulp: Fix usb-phy unit address format
parents a9815a4f 7bd9d465
Hide whitespace changes
Inline Side-by-side
Showing with 33 additions and 1886 deletions
arch/arm/Kconfig.debug
View file @ 5bb575bc
...@@ -1535,7 +1535,6 @@ config DEBUG_LL_INCLUDE ...@@ -1535,7 +1535,6 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX7D_UART DEBUG_IMX7D_UART
default "debug/ks8695.S" if DEBUG_KS8695_UART default "debug/ks8695.S" if DEBUG_KS8695_UART
default "debug/msm.S" if DEBUG_QCOM_UARTDM default "debug/msm.S" if DEBUG_QCOM_UARTDM
default "debug/netx.S" if DEBUG_NETX_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
...@@ -1575,7 +1574,6 @@ config DEBUG_UART_8250 ...@@ -1575,7 +1574,6 @@ config DEBUG_UART_8250
config DEBUG_UART_PHYS config DEBUG_UART_PHYS
hex "Physical base address of debug UART" hex "Physical base address of debug UART"
default 0x00100a00 if DEBUG_NETX_UART
default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
default 0x01c28000 if DEBUG_SUNXI_UART0 default 0x01c28000 if DEBUG_SUNXI_UART0
default 0x01c28400 if DEBUG_SUNXI_UART1 default 0x01c28400 if DEBUG_SUNXI_UART1
...@@ -1700,7 +1698,6 @@ config DEBUG_UART_PHYS ...@@ -1700,7 +1698,6 @@ config DEBUG_UART_PHYS
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \ DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
...@@ -1717,7 +1714,6 @@ config DEBUG_UART_VIRT ...@@ -1717,7 +1714,6 @@ config DEBUG_UART_VIRT
default 0xc881f000 if DEBUG_RV1108_UART2 default 0xc881f000 if DEBUG_RV1108_UART2
default 0xc8821000 if DEBUG_RV1108_UART1 default 0xc8821000 if DEBUG_RV1108_UART1
default 0xc8912000 if DEBUG_RV1108_UART0 default 0xc8912000 if DEBUG_RV1108_UART0
default 0xe0000a00 if DEBUG_NETX_UART
default 0xe0010fe0 if ARCH_RPC default 0xe0010fe0 if ARCH_RPC
default 0xf0000be0 if ARCH_EBSA110 default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART default 0xf0010000 if DEBUG_ASM9260_UART
...@@ -1822,7 +1818,6 @@ config DEBUG_UART_VIRT ...@@ -1822,7 +1818,6 @@ config DEBUG_UART_VIRT
default DEBUG_UART_PHYS if !MMU default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
DEBUG_S3C64XX_UART || \ DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
......
arch/arm/boot/dts/bcm47094-linksys-panamera.dts
View file @ 5bb575bc
...@@ -124,6 +124,9 @@ bluebar8 { ...@@ -124,6 +124,9 @@ bluebar8 {
}; };
mdio-bus-mux { mdio-bus-mux {
#address-cells = <1>;
#size-cells = <0>;
/* BIT(9) = 1 => external mdio */ /* BIT(9) = 1 => external mdio */
mdio_ext: mdio@200 { mdio_ext: mdio@200 {
reg = <0x200>; reg = <0x200>;
......
arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
View file @ 5bb575bc
...@@ -112,7 +112,7 @@ &clks { ...@@ -112,7 +112,7 @@ &clks {
}; };
&i2c2 { &i2c2 {
clock_frequency = <100000>; clock-frequency = <100000>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>; pinctrl-0 = <&pinctrl_i2c2>;
status = "okay"; status = "okay";
......
arch/arm/boot/dts/imx6ul-geam.dts
View file @ 5bb575bc
...@@ -156,7 +156,7 @@ sgtl5000: codec@a { ...@@ -156,7 +156,7 @@ sgtl5000: codec@a {
}; };
&i2c2 { &i2c2 {
clock_frequency = <100000>; clock-frequency = <100000>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>; pinctrl-0 = <&pinctrl_i2c2>;
status = "okay"; status = "okay";
......
arch/arm/boot/dts/imx6ul-isiot.dtsi
View file @ 5bb575bc
...@@ -148,7 +148,7 @@ stmpe: touchscreen { ...@@ -148,7 +148,7 @@ stmpe: touchscreen {
}; };
&i2c2 { &i2c2 {
clock_frequency = <100000>; clock-frequency = <100000>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>; pinctrl-0 = <&pinctrl_i2c2>;
status = "okay"; status = "okay";
......
arch/arm/boot/dts/imx6ul-pico-hobbit.dts
View file @ 5bb575bc
...@@ -43,7 +43,7 @@ sys_mclk: clock-sys-mclk { ...@@ -43,7 +43,7 @@ sys_mclk: clock-sys-mclk {
}; };
&i2c2 { &i2c2 {
clock_frequency = <100000>; clock-frequency = <100000>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>; pinctrl-0 = <&pinctrl_i2c2>;
status = "okay"; status = "okay";
......
arch/arm/boot/dts/imx6ul-pico-pi.dts
View file @ 5bb575bc
...@@ -43,7 +43,7 @@ sys_mclk: clock-sys-mclk { ...@@ -43,7 +43,7 @@ sys_mclk: clock-sys-mclk {
}; };
&i2c2 { &i2c2 {
clock_frequency = <100000>; clock-frequency = <100000>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>; pinctrl-0 = <&pinctrl_i2c2>;
status = "okay"; status = "okay";
...@@ -58,7 +58,7 @@ sgtl5000: codec@a { ...@@ -58,7 +58,7 @@ sgtl5000: codec@a {
}; };
&i2c3 { &i2c3 {
clock_frequency = <100000>; clock-frequency = <100000>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>; pinctrl-0 = <&pinctrl_i2c3>;
status = "okay"; status = "okay";
......
arch/arm/boot/dts/imx7ulp.dtsi
View file @ 5bb575bc
...@@ -186,7 +186,7 @@ usbmisc1: usbmisc@40330200 { ...@@ -186,7 +186,7 @@ usbmisc1: usbmisc@40330200 {
reg = <0x40330200 0x200>; reg = <0x40330200 0x200>;
}; };
usbphy1: usb-phy@0x40350000 { usbphy1: usb-phy@40350000 {
compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy"; compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
reg = <0x40350000 0x1000>; reg = <0x40350000 0x1000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
......
arch/arm/configs/u8500_defconfig
View file @ 5bb575bc
...@@ -4,17 +4,9 @@ CONFIG_NO_HZ_IDLE=y ...@@ -4,17 +4,9 @@ CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_U8500=y CONFIG_ARCH_U8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_SMP=y CONFIG_SMP=y
CONFIG_NR_CPUS=2 CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y CONFIG_HIGHMEM=y
CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_ARM_ATAG_DTB_COMPAT=y
...@@ -25,6 +17,11 @@ CONFIG_CPU_IDLE=y ...@@ -25,6 +17,11 @@ CONFIG_CPU_IDLE=y
CONFIG_ARM_U8500_CPUIDLE=y CONFIG_ARM_U8500_CPUIDLE=y
CONFIG_VFP=y CONFIG_VFP=y
CONFIG_NEON=y CONFIG_NEON=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_CMA=y
CONFIG_NET=y CONFIG_NET=y
CONFIG_PACKET=y CONFIG_PACKET=y
CONFIG_UNIX=y CONFIG_UNIX=y
...@@ -47,7 +44,6 @@ CONFIG_SMSC911X=y ...@@ -47,7 +44,6 @@ CONFIG_SMSC911X=y
CONFIG_SMSC_PHY=y CONFIG_SMSC_PHY=y
CONFIG_CW1200=y CONFIG_CW1200=y
CONFIG_CW1200_WLAN_SDIO=y CONFIG_CW1200_WLAN_SDIO=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_GPIO=y
...@@ -63,7 +59,6 @@ CONFIG_RMI4_CORE=y ...@@ -63,7 +59,6 @@ CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y CONFIG_RMI4_I2C=y
CONFIG_RMI4_F11=y CONFIG_RMI4_F11=y
# CONFIG_SERIO is not set # CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set # CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
...@@ -72,6 +67,7 @@ CONFIG_SPI=y ...@@ -72,6 +67,7 @@ CONFIG_SPI=y
CONFIG_SPI_PL022=y CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y CONFIG_GPIO_TC3589X=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_THERMAL=y CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y CONFIG_CPU_THERMAL=y
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
...@@ -79,6 +75,13 @@ CONFIG_MFD_STMPE=y ...@@ -79,6 +75,13 @@ CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y CONFIG_MFD_TC3589X=y
CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_GPIO=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
CONFIG_DRM_LIMA=y
CONFIG_DRM_MCDE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_LOGO=y
CONFIG_SOUND=y CONFIG_SOUND=y
CONFIG_SND=y CONFIG_SND=y
CONFIG_SND_SOC=y CONFIG_SND_SOC=y
...@@ -87,6 +90,7 @@ CONFIG_SND_SOC_UX500_MACH_MOP500=y ...@@ -87,6 +90,7 @@ CONFIG_SND_SOC_UX500_MACH_MOP500=y
CONFIG_USB=y CONFIG_USB=y
CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_UX500=y CONFIG_USB_MUSB_UX500=y
CONFIG_MUSB_PIO_ONLY=y
CONFIG_AB8500_USB=y CONFIG_AB8500_USB=y
CONFIG_USB_GADGET=y CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m CONFIG_USB_ETH=m
...@@ -103,6 +107,7 @@ CONFIG_RTC_DRV_AB8500=y ...@@ -103,6 +107,7 @@ CONFIG_RTC_DRV_AB8500=y
CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_PL031=y
CONFIG_DMADEVICES=y CONFIG_DMADEVICES=y
CONFIG_STE_DMA40=y CONFIG_STE_DMA40=y
CONFIG_HWSPINLOCK=y
CONFIG_HSEM_U8500=y CONFIG_HSEM_U8500=y
CONFIG_IIO=y CONFIG_IIO=y
CONFIG_IIO_SW_TRIGGER=y CONFIG_IIO_SW_TRIGGER=y
...@@ -126,20 +131,19 @@ CONFIG_NFS_FS=y ...@@ -126,20 +131,19 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_1=y
CONFIG_CRYPTO_DEV_UX500=y
CONFIG_CRYPTO_DEV_UX500_CRYP=y
CONFIG_CRYPTO_DEV_UX500_HASH=y
CONFIG_CRYPTO_DEV_UX500_DEBUG=y
CONFIG_PRINTK_TIME=y CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set # CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y CONFIG_DEBUG_USER=y
CONFIG_CORESIGHT=y CONFIG_CORESIGHT=y
CONFIG_CORESIGHT_SINK_TPIU=y CONFIG_CORESIGHT_SINK_TPIU=y
CONFIG_CORESIGHT_SINK_ETBV10=y CONFIG_CORESIGHT_SINK_ETBV10=y
CONFIG_CORESIGHT_SOURCE_ETM3X=y CONFIG_CORESIGHT_SOURCE_ETM3X=y
CONFIG_CRYPTO_DEV_UX500=y
CONFIG_CRYPTO_DEV_UX500_CRYP=y
CONFIG_CRYPTO_DEV_UX500_HASH=y
CONFIG_CRYPTO_DEV_UX500_DEBUG=y
arch/arm/mach-davinci/sleep.S
View file @ 5bb575bc
...@@ -24,6 +24,7 @@ ...@@ -24,6 +24,7 @@
#define DEEPSLEEP_SLEEPENABLE_BIT BIT(31) #define DEEPSLEEP_SLEEPENABLE_BIT BIT(31)
.text .text
.arch armv5te
/* /*
* Move DaVinci into deep sleep state * Move DaVinci into deep sleep state
* *
......
arch/arm/mach-netx/Kconfig deleted 100644 → 0
View file @ a9815a4f
# SPDX-License-Identifier: GPL-2.0-only
menu "NetX Implementations"
depends on ARCH_NETX
config MACH_NXDKN
bool "Enable Hilscher nxdkn Eval Board support"
help
Board support for the Hilscher NetX Eval Board
config MACH_NXDB500
bool "Enable Hilscher nxdb500 Eval Board support"
select ARM_AMBA
help
Board support for the Hilscher nxdb500 Eval Board
config MACH_NXEB500HMI
bool "Enable Hilscher nxeb500hmi Eval Board support"
select ARM_AMBA
help
Board support for the Hilscher nxeb500hmi Eval Board
endmenu
arch/arm/mach-netx/Makefile deleted 100644 → 0
View file @ a9815a4f
# SPDX-License-Identifier: GPL-2.0-only
#
# Makefile for the linux kernel.
#
# Object file lists.
obj-y += time.o generic.o pfifo.o xc.o
# Specific board support
obj-$(CONFIG_MACH_NXDKN) += nxdkn.o
obj-$(CONFIG_MACH_NXDB500) += nxdb500.o fb.o
obj-$(CONFIG_MACH_NXEB500HMI) += nxeb500hmi.o fb.o
arch/arm/mach-netx/Makefile.boot deleted 100644 → 0
View file @ a9815a4f
# SPDX-License-Identifier: GPL-2.0-only
zreladdr-y += 0x80008000
arch/arm/mach-netx/fb.c deleted 100644 → 0
View file @ a9815a4f
// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-netx/fb.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#include <linux/device.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/err.h>
#include <linux/gfp.h>
#include <asm/irq.h>
#include <mach/netx-regs.h>
#include <mach/hardware.h>
static struct clcd_panel *netx_panel;
void netx_clcd_enable(struct clcd_fb *fb)
{
}
int netx_clcd_setup(struct clcd_fb *fb)
{
dma_addr_t dma;
fb->panel = netx_panel;
fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, 1024 * 1024, &dma,
GFP_KERNEL);
if (!fb->fb.screen_base) {
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
return -ENOMEM;
}
fb->fb.fix.smem_start = dma;
fb->fb.fix.smem_len = 1024*1024;
return 0;
}
int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
fb->fb.fix.smem_start, fb->fb.fix.smem_len);
}
void netx_clcd_remove(struct clcd_fb *fb)
{
dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
fb->fb.fix.smem_start);
}
static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
{
netx_panel = panel;
fb_device.dev.platform_data = board;
return amba_device_register(&fb_device, &iomem_resource);
}
arch/arm/mach-netx/fb.h deleted 100644 → 0
View file @ a9815a4f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-netx/fb.h
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
void netx_clcd_enable(struct clcd_fb *fb);
int netx_clcd_setup(struct clcd_fb *fb);
int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma);
void netx_clcd_remove(struct clcd_fb *fb);
int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel);
arch/arm/mach-netx/generic.c deleted 100644 → 0
View file @ a9815a4f
// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-netx/generic.c
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#include <linux/device.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/irqchip/arm-vic.h>
#include <linux/reboot.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
#include <mach/netx-regs.h>
#include <asm/mach/irq.h>
static struct map_desc netx_io_desc[] __initdata = {
{
.virtual = NETX_IO_VIRT,
.pfn = __phys_to_pfn(NETX_IO_PHYS),
.length = NETX_IO_SIZE,
.type = MT_DEVICE
}
};
void __init netx_map_io(void)
{
iotable_init(netx_io_desc, ARRAY_SIZE(netx_io_desc));
}
static struct resource netx_rtc_resources[] = {
[0] = {
.start = 0x00101200,
.end = 0x00101220,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device netx_rtc_device = {
.name = "netx-rtc",
.id = 0,
.num_resources = ARRAY_SIZE(netx_rtc_resources),
.resource = netx_rtc_resources,
};
static struct platform_device *devices[] __initdata = {
&netx_rtc_device,
};
#if 0
#define DEBUG_IRQ(fmt...) printk(fmt)
#else
#define DEBUG_IRQ(fmt...) while (0) {}
#endif
static void netx_hif_demux_handler(struct irq_desc *desc)
{
unsigned int irq = NETX_IRQ_HIF_CHAINED(0);
unsigned int stat;
stat = ((readl(NETX_DPMAS_INT_EN) &
readl(NETX_DPMAS_INT_STAT)) >> 24) & 0x1f;
while (stat) {
if (stat & 1) {
DEBUG_IRQ("handling irq %d\n", irq);
generic_handle_irq(irq);
}
irq++;
stat >>= 1;
}
}
static int
netx_hif_irq_type(struct irq_data *d, unsigned int type)
{
unsigned int val, irq;
val = readl(NETX_DPMAS_IF_CONF1);
irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
if (type & IRQ_TYPE_EDGE_RISING) {
DEBUG_IRQ("rising edges\n");
val |= (1 << 26) << irq;
}
if (type & IRQ_TYPE_EDGE_FALLING) {
DEBUG_IRQ("falling edges\n");
val &= ~((1 << 26) << irq);
}
if (type & IRQ_TYPE_LEVEL_LOW) {
DEBUG_IRQ("low level\n");
val &= ~((1 << 26) << irq);
}
if (type & IRQ_TYPE_LEVEL_HIGH) {
DEBUG_IRQ("high level\n");
val |= (1 << 26) << irq;
}
writel(val, NETX_DPMAS_IF_CONF1);
return 0;
}
static void
netx_hif_ack_irq(struct irq_data *d)
{
unsigned int val, irq;
irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
writel((1 << 24) << irq, NETX_DPMAS_INT_STAT);
val = readl(NETX_DPMAS_INT_EN);
val &= ~((1 << 24) << irq);
writel(val, NETX_DPMAS_INT_EN);
DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
}
static void
netx_hif_mask_irq(struct irq_data *d)
{
unsigned int val, irq;
irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
val = readl(NETX_DPMAS_INT_EN);
val &= ~((1 << 24) << irq);
writel(val, NETX_DPMAS_INT_EN);
DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
}
static void
netx_hif_unmask_irq(struct irq_data *d)
{
unsigned int val, irq;
irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
val = readl(NETX_DPMAS_INT_EN);
val |= (1 << 24) << irq;
writel(val, NETX_DPMAS_INT_EN);
DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
}
static struct irq_chip netx_hif_chip = {
.irq_ack = netx_hif_ack_irq,
.irq_mask = netx_hif_mask_irq,
.irq_unmask = netx_hif_unmask_irq,
.irq_set_type = netx_hif_irq_type,
};
void __init netx_init_irq(void)
{
int irq;
vic_init(io_p2v(NETX_PA_VIC), NETX_IRQ_VIC_START, ~0, 0);
for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
irq_set_chip_and_handler(irq, &netx_hif_chip,
handle_level_irq);
irq_clear_status_flags(irq, IRQ_NOREQUEST);
}
writel(NETX_DPMAS_INT_EN_GLB_EN, NETX_DPMAS_INT_EN);
irq_set_chained_handler(NETX_IRQ_HIF, netx_hif_demux_handler);
}
static int __init netx_init(void)
{
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
subsys_initcall(netx_init);
void netx_restart(enum reboot_mode mode, const char *cmd)
{
writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
NETX_SYSTEM_RES_CR);
}
arch/arm/mach-netx/generic.h deleted 100644 → 0
View file @ a9815a4f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-netx/generic.h
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#include <linux/reboot.h>
extern void __init netx_map_io(void);
extern void __init netx_init_irq(void);
extern void netx_restart(enum reboot_mode, const char *);
extern void netx_timer_init(void);
arch/arm/mach-netx/include/mach/hardware.h deleted 100644 → 0
View file @ a9815a4f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-netx/include/mach/hardware.h
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#define NETX_IO_PHYS 0x00100000
#define NETX_IO_VIRT 0xe0000000
#define NETX_IO_SIZE 0x00100000
#define SRAM_INTERNAL_PHYS_0 0x00000
#define SRAM_INTERNAL_PHYS_1 0x08000
#define SRAM_INTERNAL_PHYS_2 0x10000
#define SRAM_INTERNAL_PHYS_3 0x18000
#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
#define XPEC_MEM_SIZE 0x4000
#define XMAC_MEM_SIZE 0x1000
#define SRAM_MEM_SIZE 0x8000
#define io_p2v(x) IOMEM((x) - NETX_IO_PHYS + NETX_IO_VIRT)
#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
#endif
arch/arm/mach-netx/include/mach/irqs.h deleted 100644 → 0
View file @ a9815a4f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-netx/include/mach/irqs.h
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#define NETX_IRQ_VIC_START 64
#define NETX_IRQ_SOFTINT (NETX_IRQ_VIC_START + 0)
#define NETX_IRQ_TIMER0 (NETX_IRQ_VIC_START + 1)
#define NETX_IRQ_TIMER1 (NETX_IRQ_VIC_START + 2)
#define NETX_IRQ_TIMER2 (NETX_IRQ_VIC_START + 3)
#define NETX_IRQ_SYSTIME_NS (NETX_IRQ_VIC_START + 4)
#define NETX_IRQ_SYSTIME_S (NETX_IRQ_VIC_START + 5)
#define NETX_IRQ_GPIO_15 (NETX_IRQ_VIC_START + 6)
#define NETX_IRQ_WATCHDOG (NETX_IRQ_VIC_START + 7)
#define NETX_IRQ_UART0 (NETX_IRQ_VIC_START + 8)
#define NETX_IRQ_UART1 (NETX_IRQ_VIC_START + 9)
#define NETX_IRQ_UART2 (NETX_IRQ_VIC_START + 10)
#define NETX_IRQ_USB (NETX_IRQ_VIC_START + 11)
#define NETX_IRQ_SPI (NETX_IRQ_VIC_START + 12)
#define NETX_IRQ_I2C (NETX_IRQ_VIC_START + 13)
#define NETX_IRQ_LCD (NETX_IRQ_VIC_START + 14)
#define NETX_IRQ_HIF (NETX_IRQ_VIC_START + 15)
#define NETX_IRQ_GPIO_0_14 (NETX_IRQ_VIC_START + 16)
#define NETX_IRQ_XPEC0 (NETX_IRQ_VIC_START + 17)
#define NETX_IRQ_XPEC1 (NETX_IRQ_VIC_START + 18)
#define NETX_IRQ_XPEC2 (NETX_IRQ_VIC_START + 19)
#define NETX_IRQ_XPEC3 (NETX_IRQ_VIC_START + 20)
#define NETX_IRQ_XPEC(no) (NETX_IRQ_VIC_START + 17 + (no))
#define NETX_IRQ_MSYNC0 (NETX_IRQ_VIC_START + 21)
#define NETX_IRQ_MSYNC1 (NETX_IRQ_VIC_START + 22)
#define NETX_IRQ_MSYNC2 (NETX_IRQ_VIC_START + 23)
#define NETX_IRQ_MSYNC3 (NETX_IRQ_VIC_START + 24)
#define NETX_IRQ_IRQ_PHY (NETX_IRQ_VIC_START + 25)
#define NETX_IRQ_ISO_AREA (NETX_IRQ_VIC_START + 26)
/* int 27 is reserved */
/* int 28 is reserved */
#define NETX_IRQ_TIMER3 (NETX_IRQ_VIC_START + 29)
#define NETX_IRQ_TIMER4 (NETX_IRQ_VIC_START + 30)
/* int 31 is reserved */
#define NETX_IRQS (NETX_IRQ_VIC_START + 32)
/* for multiplexed irqs on gpio 0..14 */
#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
/* Host interface interrupts */
#define NETX_IRQ_HIF_CHAINED(x) (NETX_IRQ_GPIO_LAST + 1 + (x))
#define NETX_IRQ_HIF_PIO35 NETX_IRQ_HIF_CHAINED(0)
#define NETX_IRQ_HIF_PIO36 NETX_IRQ_HIF_CHAINED(1)
#define NETX_IRQ_HIF_PIO40 NETX_IRQ_HIF_CHAINED(2)
#define NETX_IRQ_HIF_PIO47 NETX_IRQ_HIF_CHAINED(3)
#define NETX_IRQ_HIF_PIO72 NETX_IRQ_HIF_CHAINED(4)
#define NETX_IRQ_HIF_LAST NETX_IRQ_HIF_CHAINED(4)
#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
arch/arm/mach-netx/include/mach/netx-regs.h deleted 100644 → 0
View file @ a9815a4f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-netx/include/mach/netx-regs.h
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#ifndef __ASM_ARCH_NETX_REGS_H
#define __ASM_ARCH_NETX_REGS_H
/* offsets relative to the beginning of the io space */
#define NETX_OFS_SYSTEM 0x00000
#define NETX_OFS_MEMCR 0x00100
#define NETX_OFS_DPMAS 0x03000
#define NETX_OFS_GPIO 0x00800
#define NETX_OFS_PIO 0x00900
#define NETX_OFS_UART0 0x00a00
#define NETX_OFS_UART1 0x00a40
#define NETX_OFS_UART2 0x00a80
#define NETX_OF_MIIMU 0x00b00
#define NETX_OFS_SPI 0x00c00
#define NETX_OFS_I2C 0x00d00
#define NETX_OFS_SYSTIME 0x01100
#define NETX_OFS_RTC 0x01200
#define NETX_OFS_EXTBUS 0x03600
#define NETX_OFS_LCD 0x04000
#define NETX_OFS_USB 0x20000
#define NETX_OFS_XMAC0 0x60000
#define NETX_OFS_XMAC1 0x61000
#define NETX_OFS_XMAC2 0x62000
#define NETX_OFS_XMAC3 0x63000
#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000)
#define NETX_OFS_PFIFO 0x64000
#define NETX_OFS_XPEC0 0x70000
#define NETX_OFS_XPEC1 0x74000
#define NETX_OFS_XPEC2 0x78000
#define NETX_OFS_XPEC3 0x7c000
#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000)
#define NETX_OFS_VIC 0xff000
/* physical addresses */
#define NETX_PA_SYSTEM (NETX_IO_PHYS + NETX_OFS_SYSTEM)
#define NETX_PA_MEMCR (NETX_IO_PHYS + NETX_OFS_MEMCR)
#define NETX_PA_DPMAS (NETX_IO_PHYS + NETX_OFS_DPMAS)
#define NETX_PA_GPIO (NETX_IO_PHYS + NETX_OFS_GPIO)
#define NETX_PA_PIO (NETX_IO_PHYS + NETX_OFS_PIO)
#define NETX_PA_UART0 (NETX_IO_PHYS + NETX_OFS_UART0)
#define NETX_PA_UART1 (NETX_IO_PHYS + NETX_OFS_UART1)
#define NETX_PA_UART2 (NETX_IO_PHYS + NETX_OFS_UART2)
#define NETX_PA_MIIMU (NETX_IO_PHYS + NETX_OF_MIIMU)
#define NETX_PA_SPI (NETX_IO_PHYS + NETX_OFS_SPI)
#define NETX_PA_I2C (NETX_IO_PHYS + NETX_OFS_I2C)
#define NETX_PA_SYSTIME (NETX_IO_PHYS + NETX_OFS_SYSTIME)
#define NETX_PA_RTC (NETX_IO_PHYS + NETX_OFS_RTC)
#define NETX_PA_EXTBUS (NETX_IO_PHYS + NETX_OFS_EXTBUS)
#define NETX_PA_LCD (NETX_IO_PHYS + NETX_OFS_LCD)
#define NETX_PA_USB (NETX_IO_PHYS + NETX_OFS_USB)
#define NETX_PA_XMAC0 (NETX_IO_PHYS + NETX_OFS_XMAC0)
#define NETX_PA_XMAC1 (NETX_IO_PHYS + NETX_OFS_XMAC1)
#define NETX_PA_XMAC2 (NETX_IO_PHYS + NETX_OFS_XMAC2)
#define NETX_PA_XMAC3 (NETX_IO_PHYS + NETX_OFS_XMAC3)
#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no))
#define NETX_PA_PFIFO (NETX_IO_PHYS + NETX_OFS_PFIFO)
#define NETX_PA_XPEC0 (NETX_IO_PHYS + NETX_OFS_XPEC0)
#define NETX_PA_XPEC1 (NETX_IO_PHYS + NETX_OFS_XPEC1)
#define NETX_PA_XPEC2 (NETX_IO_PHYS + NETX_OFS_XPEC2)
#define NETX_PA_XPEC3 (NETX_IO_PHYS + NETX_OFS_XPEC3)
#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no))
#define NETX_PA_VIC (NETX_IO_PHYS + NETX_OFS_VIC)
/* virtual addresses */
#define NETX_VA_SYSTEM (NETX_IO_VIRT + NETX_OFS_SYSTEM)
#define NETX_VA_MEMCR (NETX_IO_VIRT + NETX_OFS_MEMCR)
#define NETX_VA_DPMAS (NETX_IO_VIRT + NETX_OFS_DPMAS)
#define NETX_VA_GPIO (NETX_IO_VIRT + NETX_OFS_GPIO)
#define NETX_VA_PIO (NETX_IO_VIRT + NETX_OFS_PIO)
#define NETX_VA_UART0 (NETX_IO_VIRT + NETX_OFS_UART0)
#define NETX_VA_UART1 (NETX_IO_VIRT + NETX_OFS_UART1)
#define NETX_VA_UART2 (NETX_IO_VIRT + NETX_OFS_UART2)
#define NETX_VA_MIIMU (NETX_IO_VIRT + NETX_OF_MIIMU)
#define NETX_VA_SPI (NETX_IO_VIRT + NETX_OFS_SPI)
#define NETX_VA_I2C (NETX_IO_VIRT + NETX_OFS_I2C)
#define NETX_VA_SYSTIME (NETX_IO_VIRT + NETX_OFS_SYSTIME)
#define NETX_VA_RTC (NETX_IO_VIRT + NETX_OFS_RTC)
#define NETX_VA_EXTBUS (NETX_IO_VIRT + NETX_OFS_EXTBUS)
#define NETX_VA_LCD (NETX_IO_VIRT + NETX_OFS_LCD)
#define NETX_VA_USB (NETX_IO_VIRT + NETX_OFS_USB)
#define NETX_VA_XMAC0 (NETX_IO_VIRT + NETX_OFS_XMAC0)
#define NETX_VA_XMAC1 (NETX_IO_VIRT + NETX_OFS_XMAC1)
#define NETX_VA_XMAC2 (NETX_IO_VIRT + NETX_OFS_XMAC2)
#define NETX_VA_XMAC3 (NETX_IO_VIRT + NETX_OFS_XMAC3)
#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no))
#define NETX_VA_PFIFO (NETX_IO_VIRT + NETX_OFS_PFIFO)
#define NETX_VA_XPEC0 (NETX_IO_VIRT + NETX_OFS_XPEC0)
#define NETX_VA_XPEC1 (NETX_IO_VIRT + NETX_OFS_XPEC1)
#define NETX_VA_XPEC2 (NETX_IO_VIRT + NETX_OFS_XPEC2)
#define NETX_VA_XPEC3 (NETX_IO_VIRT + NETX_OFS_XPEC3)
#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no))
#define NETX_VA_VIC (NETX_IO_VIRT + NETX_OFS_VIC)
/*********************************
* System functions *
*********************************/
/* Registers */
#define NETX_SYSTEM_REG(ofs) IOMEM(NETX_VA_SYSTEM + (ofs))
#define NETX_SYSTEM_BOO_SR NETX_SYSTEM_REG(0x00)
#define NETX_SYSTEM_IOC_CR NETX_SYSTEM_REG(0x04)
#define NETX_SYSTEM_IOC_MR NETX_SYSTEM_REG(0x08)
/* FIXME: Docs are not consistent */
/* #define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x08) */
#define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x0c)
#define NETX_SYSTEM_PHY_CONTROL NETX_SYSTEM_REG(0x10)
#define NETX_SYSTEM_REV NETX_SYSTEM_REG(0x34)
#define NETX_SYSTEM_IOC_ACCESS_KEY NETX_SYSTEM_REG(0x70)
#define NETX_SYSTEM_WDG_TR NETX_SYSTEM_REG(0x200)
#define NETX_SYSTEM_WDG_CTR NETX_SYSTEM_REG(0x204)
#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208)
#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c)
/* Bits */
#define NETX_SYSTEM_RES_CR_RSTIN (1<<0)
#define NETX_SYSTEM_RES_CR_WDG_RES (1<<1)
#define NETX_SYSTEM_RES_CR_HOST_RES (1<<2)
#define NETX_SYSTEM_RES_CR_FIRMW_RES (1<<3)
#define NETX_SYSTEM_RES_CR_XPEC0_RES (1<<4)
#define NETX_SYSTEM_RES_CR_XPEC1_RES (1<<5)
#define NETX_SYSTEM_RES_CR_XPEC2_RES (1<<6)
#define NETX_SYSTEM_RES_CR_XPEC3_RES (1<<7)
#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16)
#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17)
#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18)
#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19)
#define NETX_SYSTEM_RES_CR_FIRMW_FLG0 (1<<20)
#define NETX_SYSTEM_RES_CR_FIRMW_FLG1 (1<<21)
#define NETX_SYSTEM_RES_CR_FIRMW_FLG2 (1<<22)
#define NETX_SYSTEM_RES_CR_FIRMW_FLG3 (1<<23)
#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN (1<<24)
#define NETX_SYSTEM_RES_CR_RSTOUT (1<<25)
#define NETX_SYSTEM_RES_CR_EN_RSTOUT (1<<26)
#define PHY_CONTROL_RESET (1<<31)
#define PHY_CONTROL_SIM_BYP (1<<30)
#define PHY_CONTROL_CLK_XLATIN (1<<29)
#define PHY_CONTROL_PHY1_EN (1<<21)
#define PHY_CONTROL_PHY1_NP_MSG_CODE
#define PHY_CONTROL_PHY1_AUTOMDIX (1<<17)
#define PHY_CONTROL_PHY1_FIXMODE (1<<16)
#define PHY_CONTROL_PHY1_MODE(mode) (((mode) & 0x7) << 13)
#define PHY_CONTROL_PHY0_EN (1<<12)
#define PHY_CONTROL_PHY0_NP_MSG_CODE
#define PHY_CONTROL_PHY0_AUTOMDIX (1<<8)
#define PHY_CONTROL_PHY0_FIXMODE (1<<7)
#define PHY_CONTROL_PHY0_MODE(mode) (((mode) & 0x7) << 4)
#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf)
#define PHY_MODE_10BASE_T_HALF 0
#define PHY_MODE_10BASE_T_FULL 1
#define PHY_MODE_100BASE_TX_FX_FULL 2
#define PHY_MODE_100BASE_TX_FX_HALF 3
#define PHY_MODE_100BASE_TX_HALF 4
#define PHY_MODE_REPEATER 5
#define PHY_MODE_POWER_DOWN 6
#define PHY_MODE_ALL 7
/* Bits */
#define VECT_CNTL_ENABLE (1 << 5)
/*******************************
* GPIO and timer module *
*******************************/
/* Registers */
#define NETX_GPIO_REG(ofs) IOMEM(NETX_VA_GPIO + (ofs))
#define NETX_GPIO_CFG(gpio) NETX_GPIO_REG(0x0 + ((gpio)<<2))
#define NETX_GPIO_THRESHOLD_CAPTURE(gpio) NETX_GPIO_REG(0x40 + ((gpio)<<2))
#define NETX_GPIO_COUNTER_CTRL(counter) NETX_GPIO_REG(0x80 + ((counter)<<2))
#define NETX_GPIO_COUNTER_MAX(counter) NETX_GPIO_REG(0x94 + ((counter)<<2))
#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2))
#define NETX_GPIO_IRQ_ENABLE NETX_GPIO_REG(0xbc)
#define NETX_GPIO_IRQ_DISABLE NETX_GPIO_REG(0xc0)
#define NETX_GPIO_SYSTIME_NS_CMP NETX_GPIO_REG(0xc4)
#define NETX_GPIO_LINE NETX_GPIO_REG(0xc8)
#define NETX_GPIO_IRQ NETX_GPIO_REG(0xd0)
/* Bits */
#define NETX_GPIO_CFG_IOCFG_GP_INPUT (0x0)
#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT (0x1)
#define NETX_GPIO_CFG_IOCFG_GP_UART (0x2)
#define NETX_GPIO_CFG_INV (1<<2)
#define NETX_GPIO_CFG_MODE_INPUT_READ (0<<3)
#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3)
#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3)
#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL (3<<3)
#define NETX_GPIO_CFG_COUNT_REF_COUNTER0 (0<<5)
#define NETX_GPIO_CFG_COUNT_REF_COUNTER1 (1<<5)
#define NETX_GPIO_CFG_COUNT_REF_COUNTER2 (2<<5)
#define NETX_GPIO_CFG_COUNT_REF_COUNTER3 (3<<5)
#define NETX_GPIO_CFG_COUNT_REF_COUNTER4 (4<<5)
#define NETX_GPIO_CFG_COUNT_REF_SYSTIME (7<<5)
#define NETX_GPIO_COUNTER_CTRL_RUN (1<<0)
#define NETX_GPIO_COUNTER_CTRL_SYM (1<<1)
#define NETX_GPIO_COUNTER_CTRL_ONCE (1<<2)
#define NETX_GPIO_COUNTER_CTRL_IRQ_EN (1<<3)
#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT (1<<4)
#define NETX_GPIO_COUNTER_CTRL_RST_EN (1<<5)
#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT (1<<6)
#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */
#define GPIO_BIT(gpio) (1<<(gpio))
#define COUNTER_BIT(counter) ((1<<16)<<(counter))
/*******************************
* PIO *
*******************************/
/* Registers */
#define NETX_PIO_REG(ofs) IOMEM(NETX_VA_PIO + (ofs))
#define NETX_PIO_INPIO NETX_PIO_REG(0x0)
#define NETX_PIO_OUTPIO NETX_PIO_REG(0x4)
#define NETX_PIO_OEPIO NETX_PIO_REG(0x8)
/*******************************
* MII Unit *
*******************************/
/* Registers */
#define NETX_MIIMU IOMEM(NETX_VA_MIIMU)
/* Bits */
#define MIIMU_SNRDY (1<<0)
#define MIIMU_PREAMBLE (1<<1)
#define MIIMU_OPMODE_WRITE (1<<2)
#define MIIMU_MDC_PERIOD (1<<3)
#define MIIMU_PHY_NRES (1<<4)
#define MIIMU_RTA (1<<5)
#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6)
#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11)
#define MIIMU_DATA(data) (((data) & 0xffff) << 16)
/*******************************
* xmac / xpec *
*******************************/
/* XPEC register offsets relative to NETX_VA_XPEC(no) */
#define NETX_XPEC_R0_OFS 0x00
#define NETX_XPEC_R1_OFS 0x04
#define NETX_XPEC_R2_OFS 0x08
#define NETX_XPEC_R3_OFS 0x0c
#define NETX_XPEC_R4_OFS 0x10
#define NETX_XPEC_R5_OFS 0x14
#define NETX_XPEC_R6_OFS 0x18
#define NETX_XPEC_R7_OFS 0x1c
#define NETX_XPEC_RANGE01_OFS 0x20
#define NETX_XPEC_RANGE23_OFS 0x24
#define NETX_XPEC_RANGE45_OFS 0x28
#define NETX_XPEC_RANGE67_OFS 0x2c
#define NETX_XPEC_PC_OFS 0x48
#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2))
#define NETX_XPEC_IRQ_OFS 0x8c
#define NETX_XPEC_SYSTIME_NS_OFS 0x90
#define NETX_XPEC_FIFO_DATA_OFS 0x94
#define NETX_XPEC_SYSTIME_S_OFS 0x98
#define NETX_XPEC_ADC_OFS 0x9c
#define NETX_XPEC_URX_COUNT_OFS 0x40
#define NETX_XPEC_UTX_COUNT_OFS 0x44
#define NETX_XPEC_PC_OFS 0x48
#define NETX_XPEC_ZERO_OFS 0x4c
#define NETX_XPEC_STATCFG_OFS 0x50
#define NETX_XPEC_EC_MASKA_OFS 0x54
#define NETX_XPEC_EC_MASKB_OFS 0x58
#define NETX_XPEC_EC_MASK0_OFS 0x5c
#define NETX_XPEC_EC_MASK8_OFS 0x7c
#define NETX_XPEC_EC_MASK9_OFS 0x80
#define NETX_XPEC_XPU_HOLD_PC_OFS 0x100
#define NETX_XPEC_RAM_START_OFS 0x2000
/* Bits */
#define XPU_HOLD_PC (1<<0)
/* XMAC register offsets relative to NETX_VA_XMAC(no) */
#define NETX_XMAC_RPU_PROGRAM_START_OFS 0x000
#define NETX_XMAC_RPU_PROGRAM_END_OFS 0x3ff
#define NETX_XMAC_TPU_PROGRAM_START_OFS 0x400
#define NETX_XMAC_TPU_PROGRAM_END_OFS 0x7ff
#define NETX_XMAC_RPU_HOLD_PC_OFS 0xa00
#define NETX_XMAC_TPU_HOLD_PC_OFS 0xa04
#define NETX_XMAC_STATUS_SHARED0_OFS 0x840
#define NETX_XMAC_CONFIG_SHARED0_OFS 0x844
#define NETX_XMAC_STATUS_SHARED1_OFS 0x848
#define NETX_XMAC_CONFIG_SHARED1_OFS 0x84c
#define NETX_XMAC_STATUS_SHARED2_OFS 0x850
#define NETX_XMAC_CONFIG_SHARED2_OFS 0x854
#define NETX_XMAC_STATUS_SHARED3_OFS 0x858
#define NETX_XMAC_CONFIG_SHARED3_OFS 0x85c
#define RPU_HOLD_PC (1<<15)
#define TPU_HOLD_PC (1<<15)
/*******************************
* Pointer FIFO *
*******************************/
/* Registers */
#define NETX_PFIFO_REG(ofs) IOMEM(NETX_VA_PFIFO + (ofs))
#define NETX_PFIFO_BASE(pfifo) NETX_PFIFO_REG(0x00 + ((pfifo)<<2))
#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2))
#define NETX_PFIFO_RESET NETX_PFIFO_REG(0x100)
#define NETX_PFIFO_FULL NETX_PFIFO_REG(0x104)
#define NETX_PFIFO_EMPTY NETX_PFIFO_REG(0x108)
#define NETX_PFIFO_OVEFLOW NETX_PFIFO_REG(0x10c)
#define NETX_PFIFO_UNDERRUN NETX_PFIFO_REG(0x110)
#define NETX_PFIFO_FILL_LEVEL(pfifo) NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
#define NETX_PFIFO_XPEC_ISR(xpec) NETX_PFIFO_REG(0x400 + ((xpec) << 2))
/*******************************
* Memory Controller *
*******************************/
/* Registers */
#define NETX_MEMCR_REG(ofs) IOMEM(NETX_VA_MEMCR + (ofs))
#define NETX_MEMCR_SRAM_CTRL(cs) NETX_MEMCR_REG(0x0 + 4 * (cs)) /* SRAM for CS 0..2 */
#define NETX_MEMCR_SDRAM_CFG_CTRL NETX_MEMCR_REG(0x40)
#define NETX_MEMCR_SDRAM_TIMING_CTRL NETX_MEMCR_REG(0x44)
#define NETX_MEMCR_SDRAM_MODE NETX_MEMCR_REG(0x48)
#define NETX_MEMCR_SDRAM_EXT_MODE NETX_MEMCR_REG(0x4c)
#define NETX_MEMCR_PRIO_TIMESLOT_CTRL NETX_MEMCR_REG(0x80)
#define NETX_MEMCR_PRIO_ACCESS_CTRL NETX_MEMCR_REG(0x84)
/* Bits */
#define NETX_MEMCR_SRAM_CTRL_WIDTHEXTMEM(x) (((x) & 0x3) << 24)
#define NETX_MEMCR_SRAM_CTRL_WSPOSTPAUSEEXTMEM(x) (((x) & 0x3) << 16)
#define NETX_MEMCR_SRAM_CTRL_WSPREPASEEXTMEM(x) (((x) & 0x3) << 8)
#define NETX_MEMCR_SRAM_CTRL_WSEXTMEM(x) (((x) & 0x1f) << 0)
/*******************************
* Dual Port Memory *
*******************************/
/* Registers */
#define NETX_DPMAS_REG(ofs) IOMEM(NETX_VA_DPMAS + (ofs))
#define NETX_DPMAS_SYS_STAT NETX_DPMAS_REG(0x4d8)
#define NETX_DPMAS_INT_STAT NETX_DPMAS_REG(0x4e0)
#define NETX_DPMAS_INT_EN NETX_DPMAS_REG(0x4f0)
#define NETX_DPMAS_IF_CONF0 NETX_DPMAS_REG(0x608)
#define NETX_DPMAS_IF_CONF1 NETX_DPMAS_REG(0x60c)
#define NETX_DPMAS_EXT_CONFIG(cs) NETX_DPMAS_REG(0x610 + 4 * (cs))
#define NETX_DPMAS_IO_MODE0 NETX_DPMAS_REG(0x620) /* I/O 32..63 */
#define NETX_DPMAS_DRV_EN0 NETX_DPMAS_REG(0x624)
#define NETX_DPMAS_DATA0 NETX_DPMAS_REG(0x628)
#define NETX_DPMAS_IO_MODE1 NETX_DPMAS_REG(0x630) /* I/O 64..84 */
#define NETX_DPMAS_DRV_EN1 NETX_DPMAS_REG(0x634)
#define NETX_DPMAS_DATA1 NETX_DPMAS_REG(0x638)
/* Bits */
#define NETX_DPMAS_INT_EN_GLB_EN (1<<31)
#define NETX_DPMAS_INT_EN_MEM_LCK (1<<30)
#define NETX_DPMAS_INT_EN_WDG (1<<29)
#define NETX_DPMAS_INT_EN_PIO72 (1<<28)
#define NETX_DPMAS_INT_EN_PIO47 (1<<27)
#define NETX_DPMAS_INT_EN_PIO40 (1<<26)
#define NETX_DPMAS_INT_EN_PIO36 (1<<25)
#define NETX_DPMAS_INT_EN_PIO35 (1<<24)
#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28)
#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS (1<<28)
#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT (2<<28)
#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28)
#define NETX_DPMAS_IF_CONF0_HIF_IO (4<<28)
#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP (1<<14)
#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD (2<<14)
#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14)
#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26)
#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27)
#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28)
#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29)
#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30)
#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29)
#define NETX_EXT_CONFIG_TADRHOLD(x) (((x) & 0x7) << 26)
#define NETX_EXT_CONFIG_TCSON(x) (((x) & 0x7) << 23)
#define NETX_EXT_CONFIG_TRDON(x) (((x) & 0x7) << 20)
#define NETX_EXT_CONFIG_TWRON(x) (((x) & 0x7) << 17)
#define NETX_EXT_CONFIG_TWROFF(x) (((x) & 0x1f) << 12)
#define NETX_EXT_CONFIG_TRDWRCYC(x) (((x) & 0x1f) << 7)
#define NETX_EXT_CONFIG_WAIT_POL (1<<6)
#define NETX_EXT_CONFIG_WAIT_EN (1<<5)
#define NETX_EXT_CONFIG_NRD_MODE (1<<4)
#define NETX_EXT_CONFIG_DS_MODE (1<<3)
#define NETX_EXT_CONFIG_NWR_MODE (1<<2)
#define NETX_EXT_CONFIG_16BIT (1<<1)
#define NETX_EXT_CONFIG_CS_ENABLE (1<<0)
#define NETX_DPMAS_IO_MODE0_WRL (1<<13)
#define NETX_DPMAS_IO_MODE0_WAIT (1<<14)
#define NETX_DPMAS_IO_MODE0_READY (1<<15)
#define NETX_DPMAS_IO_MODE0_CS0 (1<<19)
#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20)
#define NETX_DPMAS_IO_MODE1_CS2 (1<<15)
#define NETX_DPMAS_IO_MODE1_CS1 (1<<16)
#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR (0<<30)
#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30)
#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30)
#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36 (3<<30)
/*******************************
* I2C *
*******************************/
#define NETX_I2C_REG(ofs) IOMEM(NETX_VA_I2C, (ofs))
#define NETX_I2C_CTRL NETX_I2C_REG(0x0)
#define NETX_I2C_DATA NETX_I2C_REG(0x4)
#endif /* __ASM_ARCH_NETX_REGS_H */
arch/arm/mach-netx/include/mach/pfifo.h deleted 100644 → 0
View file @ a9815a4f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-netx/include/mach/pfifo.h
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#ifndef ASM_ARCH_PFIFO_H
#define ASM_ARCH_PFIFO_H
static inline int pfifo_push(int no, unsigned int pointer)
{
writel(pointer, NETX_PFIFO_BASE(no));
return 0;
}
static inline unsigned int pfifo_pop(int no)
{
return readl(NETX_PFIFO_BASE(no));
}
static inline int pfifo_fill_level(int no)
{
return readl(NETX_PFIFO_FILL_LEVEL(no));
}
static inline int pfifo_full(int no)
{
return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0;
}
static inline int pfifo_empty(int no)
{
return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0;
}
int pfifo_request(unsigned int pfifo_mask);
void pfifo_free(unsigned int pfifo_mask);
#endif /* ASM_ARCH_PFIFO_H */
arch/arm/mach-netx/include/mach/uncompress.h deleted 100644 → 0
View file @ a9815a4f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-netx/include/mach/uncompress.h
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
/*
* The following code assumes the serial port has already been
* initialized by the bootloader. We search for the first enabled
* port in the most probable order. If you didn't setup a port in
* your bootloader then nothing will appear (which might be desired).
*
* This does not append a newline
*/
#define REG(x) (*(volatile unsigned long *)(x))
#define UART1_BASE 0x100a00
#define UART2_BASE 0x100a80
#define UART_DR 0x0
#define UART_CR 0x14
#define CR_UART_EN (1<<0)
#define UART_FR 0x18
#define FR_BUSY (1<<3)
#define FR_TXFF (1<<5)
static inline void putc(char c)
{
unsigned long base;
if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
base = UART1_BASE;
else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
base = UART2_BASE;
else
return;
while (REG(base + UART_FR) & FR_TXFF);
REG(base + UART_DR) = c;
}
static inline void flush(void)
{
unsigned long base;
if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
base = UART1_BASE;
else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
base = UART2_BASE;
else
return;
while (REG(base + UART_FR) & FR_BUSY);
}
/*
* nothing to do
*/
#define arch_decomp_setup()
arch/arm/mach-netx/include/mach/xc.h deleted 100644 → 0
View file @ a9815a4f
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-netx/include/mach/xc.h
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#ifndef __ASM_ARCH_XC_H
#define __ASM_ARCH_XC_H
struct xc {
int no;
unsigned int type;
unsigned int version;
void __iomem *xpec_base;
void __iomem *xmac_base;
void __iomem *sram_base;
int irq;
struct device *dev;
};
int xc_reset(struct xc *x);
int xc_stop(struct xc* x);
int xc_start(struct xc *x);
int xc_running(struct xc *x);
int xc_request_firmware(struct xc* x);
struct xc* request_xc(int xcno, struct device *dev);
void free_xc(struct xc *x);
#endif /* __ASM_ARCH_XC_H */
arch/arm/mach-netx/nxdb500.c deleted 100644 → 0
View file @ a9815a4f
// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-netx/nxdb500.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/mtd/plat-ram.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/netx-regs.h>
#include <linux/platform_data/eth-netx.h>
#include "generic.h"
#include "fb.h"
static struct clcd_panel qvga = {
.mode = {
.name = "QVGA",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 187617,
.left_margin = 6,
.right_margin = 26,
.upper_margin = 0,
.lower_margin = 6,
.hsync_len = 6,
.vsync_len = 1,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = 16,
.cntl = CNTL_LCDTFT | CNTL_BGR,
.bpp = 16,
.grayscale = 0,
};
static inline int nxdb500_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
{
var->green.length = 5;
var->green.msb_right = 0;
return clcdfb_check(fb, var);
}
static int nxdb500_clcd_setup(struct clcd_fb *fb)
{
unsigned int val;
fb->fb.var.green.length = 5;
fb->fb.var.green.msb_right = 0;
/* enable asic control */
val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
writel(3, NETX_SYSTEM_IOC_CR);
val = readl(NETX_PIO_OUTPIO);
writel(val | 1, NETX_PIO_OUTPIO);
val = readl(NETX_PIO_OEPIO);
writel(val | 1, NETX_PIO_OEPIO);
return netx_clcd_setup(fb);
}
static struct clcd_board clcd_data = {
.name = "netX",
.check = nxdb500_check,
.decode = clcdfb_decode,
.enable = netx_clcd_enable,
.setup = nxdb500_clcd_setup,
.mmap = netx_clcd_mmap,
.remove = netx_clcd_remove,
};
static struct netxeth_platform_data eth0_platform_data = {
.xcno = 0,
};
static struct platform_device netx_eth0_device = {
.name = "netx-eth",
.id = 0,
.num_resources = 0,
.resource = NULL,
.dev = {
.platform_data = &eth0_platform_data,
}
};
static struct netxeth_platform_data eth1_platform_data = {
.xcno = 1,
};
static struct platform_device netx_eth1_device = {
.name = "netx-eth",
.id = 1,
.num_resources = 0,
.resource = NULL,
.dev = {
.platform_data = &eth1_platform_data,
}
};
static struct resource netx_uart0_resources[] = {
[0] = {
.start = 0x00100A00,
.end = 0x00100A3F,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (NETX_IRQ_UART0),
.end = (NETX_IRQ_UART0),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device netx_uart0_device = {
.name = "netx-uart",
.id = 0,
.num_resources = ARRAY_SIZE(netx_uart0_resources),
.resource = netx_uart0_resources,
};
static struct resource netx_uart1_resources[] = {
[0] = {
.start = 0x00100A40,
.end = 0x00100A7F,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (NETX_IRQ_UART1),
.end = (NETX_IRQ_UART1),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device netx_uart1_device = {
.name = "netx-uart",
.id = 1,
.num_resources = ARRAY_SIZE(netx_uart1_resources),
.resource = netx_uart1_resources,
};
static struct resource netx_uart2_resources[] = {
[0] = {
.start = 0x00100A80,
.end = 0x00100ABF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (NETX_IRQ_UART2),
.end = (NETX_IRQ_UART2),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device netx_uart2_device = {
.name = "netx-uart",
.id = 2,
.num_resources = ARRAY_SIZE(netx_uart2_resources),
.resource = netx_uart2_resources,
};
static struct platform_device *devices[] __initdata = {
&netx_eth0_device,
&netx_eth1_device,
&netx_uart0_device,
&netx_uart1_device,
&netx_uart2_device,
};
static void __init nxdb500_init(void)
{
netx_fb_init(&clcd_data, &qvga);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(NXDB500, "Hilscher nxdb500")
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.init_time = netx_timer_init,
.init_machine = nxdb500_init,
.restart = netx_restart,
MACHINE_END
arch/arm/mach-netx/nxdkn.c deleted 100644 → 0
View file @ a9815a4f
// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-netx/nxdkn.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/mtd/plat-ram.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/netx-regs.h>
#include <linux/platform_data/eth-netx.h>
#include "generic.h"
static struct netxeth_platform_data eth0_platform_data = {
.xcno = 0,
};
static struct platform_device nxdkn_eth0_device = {
.name = "netx-eth",
.id = 0,
.num_resources = 0,
.resource = NULL,
.dev = {
.platform_data = &eth0_platform_data,
}
};
static struct netxeth_platform_data eth1_platform_data = {
.xcno = 1,
};
static struct platform_device nxdkn_eth1_device = {
.name = "netx-eth",
.id = 1,
.num_resources = 0,
.resource = NULL,
.dev = {
.platform_data = &eth1_platform_data,
}
};
static struct resource netx_uart0_resources[] = {
[0] = {
.start = 0x00100A00,
.end = 0x00100A3F,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (NETX_IRQ_UART0),
.end = (NETX_IRQ_UART0),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device netx_uart0_device = {
.name = "netx-uart",
.id = 0,
.num_resources = ARRAY_SIZE(netx_uart0_resources),
.resource = netx_uart0_resources,
};
static struct platform_device *devices[] __initdata = {
&nxdkn_eth0_device,
&nxdkn_eth1_device,
&netx_uart0_device,
};
static void __init nxdkn_init(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(NXDKN, "Hilscher nxdkn")
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.init_time = netx_timer_init,
.init_machine = nxdkn_init,
.restart = netx_restart,
MACHINE_END
arch/arm/mach-netx/nxeb500hmi.c deleted 100644 → 0
View file @ a9815a4f
// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-netx/nxeb500hmi.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/mtd/plat-ram.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/netx-regs.h>
#include <linux/platform_data/eth-netx.h>
#include "generic.h"
#include "fb.h"
static struct clcd_panel qvga = {
.mode = {
.name = "QVGA",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 187617,
.left_margin = 6,
.right_margin = 26,
.upper_margin = 0,
.lower_margin = 6,
.hsync_len = 6,
.vsync_len = 1,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = 16,
.cntl = CNTL_LCDTFT | CNTL_BGR,
.bpp = 16,
.grayscale = 0,
};
static inline int nxeb500hmi_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
{
var->green.length = 5;
var->green.msb_right = 0;
return clcdfb_check(fb, var);
}
static int nxeb500hmi_clcd_setup(struct clcd_fb *fb)
{
unsigned int val;
fb->fb.var.green.length = 5;
fb->fb.var.green.msb_right = 0;
/* enable asic control */
val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
writel(3, NETX_SYSTEM_IOC_CR);
/* GPIO 14 is used for display enable on newer boards */
writel(9, NETX_GPIO_CFG(14));
val = readl(NETX_PIO_OUTPIO);
writel(val | 1, NETX_PIO_OUTPIO);
val = readl(NETX_PIO_OEPIO);
writel(val | 1, NETX_PIO_OEPIO);
return netx_clcd_setup(fb);
}
static struct clcd_board clcd_data = {
.name = "netX",
.check = nxeb500hmi_check,
.decode = clcdfb_decode,
.enable = netx_clcd_enable,
.setup = nxeb500hmi_clcd_setup,
.mmap = netx_clcd_mmap,
.remove = netx_clcd_remove,
};
static struct netxeth_platform_data eth0_platform_data = {
.xcno = 0,
};
static struct platform_device netx_eth0_device = {
.name = "netx-eth",
.id = 0,
.num_resources = 0,
.resource = NULL,
.dev = {
.platform_data = &eth0_platform_data,
}
};
static struct netxeth_platform_data eth1_platform_data = {
.xcno = 1,
};
static struct platform_device netx_eth1_device = {
.name = "netx-eth",
.id = 1,
.num_resources = 0,
.resource = NULL,
.dev = {
.platform_data = &eth1_platform_data,
}
};
static struct resource netx_cf_resources[] = {
[0] = {
.start = 0x20000000,
.end = 0x25ffffff,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
},
};
static struct platform_device netx_cf_device = {
.name = "netx-cf",
.id = 0,
.resource = netx_cf_resources,
.num_resources = ARRAY_SIZE(netx_cf_resources),
};
static struct resource netx_uart0_resources[] = {
[0] = {
.start = 0x00100A00,
.end = 0x00100A3F,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = (NETX_IRQ_UART0),
.end = (NETX_IRQ_UART0),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device netx_uart0_device = {
.name = "netx-uart",
.id = 0,
.num_resources = ARRAY_SIZE(netx_uart0_resources),
.resource = netx_uart0_resources,
};
static struct platform_device *devices[] __initdata = {
&netx_eth0_device,
&netx_eth1_device,
&netx_cf_device,
&netx_uart0_device,
};
static void __init nxeb500hmi_init(void)
{
netx_fb_init(&clcd_data, &qvga);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
.atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.init_time = netx_timer_init,
.init_machine = nxeb500hmi_init,
.restart = netx_restart,
MACHINE_END
arch/arm/mach-netx/pfifo.c deleted 100644 → 0
View file @ a9815a4f
// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-netx/pfifo.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/netx-regs.h>
#include <mach/pfifo.h>
static DEFINE_MUTEX(pfifo_lock);
static unsigned int pfifo_used = 0;
int pfifo_request(unsigned int pfifo_mask)
{
int err = 0;
unsigned int val;
mutex_lock(&pfifo_lock);
if (pfifo_mask & pfifo_used) {
err = -EBUSY;
goto out;
}
pfifo_used |= pfifo_mask;
val = readl(NETX_PFIFO_RESET);
writel(val | pfifo_mask, NETX_PFIFO_RESET);
writel(val, NETX_PFIFO_RESET);
out:
mutex_unlock(&pfifo_lock);
return err;
}
void pfifo_free(unsigned int pfifo_mask)
{
mutex_lock(&pfifo_lock);
pfifo_used &= ~pfifo_mask;
mutex_unlock(&pfifo_lock);
}
EXPORT_SYMBOL(pfifo_push);
EXPORT_SYMBOL(pfifo_pop);
EXPORT_SYMBOL(pfifo_fill_level);
EXPORT_SYMBOL(pfifo_empty);
EXPORT_SYMBOL(pfifo_request);
EXPORT_SYMBOL(pfifo_free);
arch/arm/mach-netx/time.c deleted 100644 → 0
View file @ a9815a4f
// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-netx/time.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
#include <mach/netx-regs.h>
#define NETX_CLOCK_FREQ 100000000
#define NETX_LATCH DIV_ROUND_CLOSEST(NETX_CLOCK_FREQ, HZ)
#define TIMER_CLOCKEVENT 0
#define TIMER_CLOCKSOURCE 1
static inline void timer_shutdown(struct clock_event_device *evt)
{
/* disable timer */
writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
}
static int netx_shutdown(struct clock_event_device *evt)
{
timer_shutdown(evt);
return 0;
}
static int netx_set_oneshot(struct clock_event_device *evt)
{
u32 tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN;
timer_shutdown(evt);
writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
return 0;
}
static int netx_set_periodic(struct clock_event_device *evt)
{
u32 tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN;
timer_shutdown(evt);
writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
return 0;
}
static int netx_set_next_event(unsigned long evt,
struct clock_event_device *clk)
{
writel(0 - evt, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKEVENT));
return 0;
}
static struct clock_event_device netx_clockevent = {
.name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = netx_set_next_event,
.set_state_shutdown = netx_shutdown,
.set_state_periodic = netx_set_periodic,
.set_state_oneshot = netx_set_oneshot,
.tick_resume = netx_shutdown,
};
/*
* IRQ handler for the timer
*/
static irqreturn_t
netx_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &netx_clockevent;
/* acknowledge interrupt */
writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction netx_timer_irq = {
.name = "NetX Timer Tick",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = netx_timer_interrupt,
};
/*
* Set up timer interrupt
*/
void __init netx_timer_init(void)
{
/* disable timer initially */
writel(0, NETX_GPIO_COUNTER_CTRL(0));
/* Reset the timer value to zero */
writel(0, NETX_GPIO_COUNTER_CURRENT(0));
writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(0));
/* acknowledge interrupt */
writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
/* Enable the interrupt in the specific timer
* register and start timer
*/
writel(COUNTER_BIT(0), NETX_GPIO_IRQ_ENABLE);
writel(NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN,
NETX_GPIO_COUNTER_CTRL(0));
setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq);
/* Setup timer one for clocksource */
writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
writel(0, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
writel(0xffffffff, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKSOURCE));
writel(NETX_GPIO_COUNTER_CTRL_RUN,
NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
"netx_timer", NETX_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up);
/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
* Adding some safety ... */
netx_clockevent.cpumask = cpumask_of(0);
clockevents_config_and_register(&netx_clockevent, NETX_CLOCK_FREQ,
0xa00, 0xfffffffe);
}
arch/arm/mach-netx/xc.c deleted 100644 → 0
View file @ a9815a4f
// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-netx/xc.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*/
#include <linux/init.h>
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/export.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/netx-regs.h>
#include <mach/xc.h>
static DEFINE_MUTEX(xc_lock);
static int xc_in_use = 0;
struct fw_desc {
unsigned int ofs;
unsigned int size;
unsigned int patch_ofs;
unsigned int patch_entries;
};
struct fw_header {
unsigned int magic;
unsigned int type;
unsigned int version;
unsigned int reserved[5];
struct fw_desc fw_desc[3];
} __attribute__ ((packed));
int xc_stop(struct xc *x)
{
writel(RPU_HOLD_PC, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS);
writel(TPU_HOLD_PC, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS);
writel(XPU_HOLD_PC, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS);
return 0;
}
int xc_start(struct xc *x)
{
writel(0, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS);
writel(0, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS);
writel(0, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS);
return 0;
}
int xc_running(struct xc *x)
{
return (readl(x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS) & RPU_HOLD_PC)
|| (readl(x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS) & TPU_HOLD_PC)
|| (readl(x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS) & XPU_HOLD_PC) ?
0 : 1;
}
int xc_reset(struct xc *x)
{
writel(0, x->xpec_base + NETX_XPEC_PC_OFS);
return 0;
}
static int xc_check_ptr(struct xc *x, unsigned long adr, unsigned int size)
{
if (adr >= NETX_PA_XMAC(x->no) &&
adr + size < NETX_PA_XMAC(x->no) + XMAC_MEM_SIZE)
return 0;
if (adr >= NETX_PA_XPEC(x->no) &&
adr + size < NETX_PA_XPEC(x->no) + XPEC_MEM_SIZE)
return 0;
dev_err(x->dev, "Illegal pointer in firmware found. aborting\n");
return -1;
}
static int xc_patch(struct xc *x, const void *patch, int count)
{
unsigned int val, adr;
const unsigned int *data = patch;
int i;
for (i = 0; i < count; i++) {
adr = *data++;
val = *data++;
if (xc_check_ptr(x, adr, 4) < 0)
return -EINVAL;
writel(val, (void __iomem *)io_p2v(adr));
}
return 0;
}
int xc_request_firmware(struct xc *x)
{
int ret;
char name[16];
const struct firmware *fw;
struct fw_header *head;
unsigned int size;
int i;
const void *src;
unsigned long dst;
sprintf(name, "xc%d.bin", x->no);
ret = request_firmware(&fw, name, x->dev);
if (ret < 0) {
dev_err(x->dev, "request_firmware failed\n");
return ret;
}
head = (struct fw_header *)fw->data;
if (head->magic != 0x4e657458) {
if (head->magic == 0x5874654e) {
dev_err(x->dev,
"firmware magic is 'XteN'. Endianness problems?\n");
ret = -ENODEV;
goto exit_release_firmware;
}
dev_err(x->dev, "unrecognized firmware magic 0x%08x\n",
head->magic);
ret = -ENODEV;
goto exit_release_firmware;
}
x->type = head->type;
x->version = head->version;
ret = -EINVAL;
for (i = 0; i < 3; i++) {
src = fw->data + head->fw_desc[i].ofs;
dst = *(unsigned int *)src;
src += sizeof (unsigned int);
size = head->fw_desc[i].size - sizeof (unsigned int);
if (xc_check_ptr(x, dst, size))
goto exit_release_firmware;
memcpy((void *)io_p2v(dst), src, size);
src = fw->data + head->fw_desc[i].patch_ofs;
size = head->fw_desc[i].patch_entries;
ret = xc_patch(x, src, size);
if (ret < 0)
goto exit_release_firmware;
}
ret = 0;
exit_release_firmware:
release_firmware(fw);
return ret;
}
struct xc *request_xc(int xcno, struct device *dev)
{
struct xc *x = NULL;
mutex_lock(&xc_lock);
if (xcno > 3)
goto exit;
if (xc_in_use & (1 << xcno))
goto exit;
x = kmalloc(sizeof (struct xc), GFP_KERNEL);
if (!x)
goto exit;
if (!request_mem_region
(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(&dev->kobj)))
goto exit_free;
if (!request_mem_region
(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(&dev->kobj)))
goto exit_release_1;
if (!request_mem_region
(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(&dev->kobj)))
goto exit_release_2;
x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno));
x->xmac_base = (void * __iomem)io_p2v(NETX_PA_XMAC(xcno));
x->sram_base = ioremap(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
if (!x->sram_base)
goto exit_release_3;
x->irq = NETX_IRQ_XPEC(xcno);
x->no = xcno;
x->dev = dev;
xc_in_use |= (1 << xcno);
goto exit;
exit_release_3:
release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
exit_release_2:
release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE);
exit_release_1:
release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE);
exit_free:
kfree(x);
x = NULL;
exit:
mutex_unlock(&xc_lock);
return x;
}
void free_xc(struct xc *x)
{
int xcno = x->no;
mutex_lock(&xc_lock);
iounmap(x->sram_base);
release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE);
release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE);
xc_in_use &= ~(1 << x->no);
kfree(x);
mutex_unlock(&xc_lock);
}
EXPORT_SYMBOL(free_xc);
EXPORT_SYMBOL(request_xc);
EXPORT_SYMBOL(xc_request_firmware);
EXPORT_SYMBOL(xc_reset);
EXPORT_SYMBOL(xc_running);
EXPORT_SYMBOL(xc_start);
EXPORT_SYMBOL(xc_stop);
arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
View file @ 5bb575bc
...@@ -462,7 +462,7 @@ ...@@ -462,7 +462,7 @@
#define MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0 0x1CC 0x434 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0 0x1CC 0x434 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CAPTURE2 0x1D0 0x438 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK 0x1D0 0x438 0x000 0x1 0x0
#define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 #define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2
#define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0
...@@ -472,7 +472,7 @@ ...@@ -472,7 +472,7 @@
#define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CLK 0x1D8 0x440 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x000 0x1 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2
#define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0
#define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0
......
arch/arm64/boot/dts/freescale/imx8mq.dtsi
View file @ 5bb575bc
...@@ -715,8 +715,7 @@ uart2: serial@30890000 { ...@@ -715,8 +715,7 @@ uart2: serial@30890000 {
sai2: sai@308b0000 { sai2: sai@308b0000 {
#sound-dai-cells = <0>; #sound-dai-cells = <0>;
compatible = "fsl,imx8mq-sai", compatible = "fsl,imx8mq-sai";
"fsl,imx6sx-sai";
reg = <0x308b0000 0x10000>; reg = <0x308b0000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7