Skip to content

L
linux
Commit 5bbc1722 authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge branch 'davem-next' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

parents 30902dc3 ae7b6487
Hide whitespace changes
Inline Side-by-side
Showing with 2118 additions and 8116 deletions
Documentation/networking/bonding.txt
View file @ 5bbc1722
...@@ -376,7 +376,8 @@ max_bonds ...@@ -376,7 +376,8 @@ max_bonds
Specifies the number of bonding devices to create for this Specifies the number of bonding devices to create for this
instance of the bonding driver. E.g., if max_bonds is 3, and instance of the bonding driver. E.g., if max_bonds is 3, and
the bonding driver is not already loaded, then bond0, bond1 the bonding driver is not already loaded, then bond0, bond1
and bond2 will be created. The default value is 1. and bond2 will be created. The default value is 1. Specifying
a value of 0 will load bonding, but will not create any devices.
miimon miimon
...@@ -539,6 +540,17 @@ mode ...@@ -539,6 +540,17 @@ mode
swapped with the new curr_active_slave that was swapped with the new curr_active_slave that was
chosen. chosen.
num_grat_arp
Specifies the number of gratuitous ARPs to be issued after a
failover event. One gratuitous ARP is issued immediately after
the failover, subsequent ARPs are sent at a rate of one per link
monitor interval (arp_interval or miimon, whichever is active).
The valid range is 0 - 255; the default value is 1. This option
affects only the active-backup mode. This option was added for
bonding version 3.3.0.
primary primary
A string (eth0, eth2, etc) specifying which slave is the A string (eth0, eth2, etc) specifying which slave is the
......
MAINTAINERS
View file @ 5bbc1722
...@@ -2147,6 +2147,8 @@ P: Jesse Brandeburg ...@@ -2147,6 +2147,8 @@ P: Jesse Brandeburg
M: jesse.brandeburg@intel.com M: jesse.brandeburg@intel.com
P: Bruce Allan P: Bruce Allan
M: bruce.w.allan@intel.com M: bruce.w.allan@intel.com
P: PJ Waskiewicz
M: peter.p.waskiewicz.jr@intel.com
P: John Ronciak P: John Ronciak
M: john.ronciak@intel.com M: john.ronciak@intel.com
L: e1000-devel@lists.sourceforge.net L: e1000-devel@lists.sourceforge.net
...@@ -2690,12 +2692,10 @@ L: libertas-dev@lists.infradead.org ...@@ -2690,12 +2692,10 @@ L: libertas-dev@lists.infradead.org
S: Maintained S: Maintained
MARVELL MV643XX ETHERNET DRIVER MARVELL MV643XX ETHERNET DRIVER
P: Dale Farnsworth P: Lennert Buytenhek
M: dale@farnsworth.org M: buytenh@marvell.com
P: Manish Lachwani
M: mlachwani@mvista.com
L: netdev@vger.kernel.org L: netdev@vger.kernel.org
S: Odd Fixes for 2.4; Maintained for 2.6. S: Supported
MATROX FRAMEBUFFER DRIVER MATROX FRAMEBUFFER DRIVER
P: Petr Vandrovec P: Petr Vandrovec
...@@ -3233,14 +3233,6 @@ L: linux-kernel@vger.kernel.org ...@@ -3233,14 +3233,6 @@ L: linux-kernel@vger.kernel.org
T: git git.infradead.org/battery-2.6.git T: git git.infradead.org/battery-2.6.git
S: Maintained S: Maintained
POWERPC 4xx EMAC DRIVER
P: Eugene Surovegin
M: ebs@ebshome.net
W: http://kernel.ebshome.net/emac/
L: linuxppc-dev@ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
PNP SUPPORT PNP SUPPORT
P: Adam Belay P: Adam Belay
M: ambx1@neo.rr.com M: ambx1@neo.rr.com
......
drivers/net/Kconfig
View file @ 5bbc1722
...@@ -1255,7 +1255,6 @@ config IBMVETH ...@@ -1255,7 +1255,6 @@ config IBMVETH
To compile this driver as a module, choose M here. The module will To compile this driver as a module, choose M here. The module will
be called ibmveth. be called ibmveth.
source "drivers/net/ibm_emac/Kconfig"
source "drivers/net/ibm_newemac/Kconfig" source "drivers/net/ibm_newemac/Kconfig"
config NET_PCI config NET_PCI
......
drivers/net/Makefile
View file @ 5bbc1722
...@@ -4,7 +4,6 @@ ...@@ -4,7 +4,6 @@
obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_E1000E) += e1000e/ obj-$(CONFIG_E1000E) += e1000e/
obj-$(CONFIG_IBM_EMAC) += ibm_emac/
obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/ obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
obj-$(CONFIG_IGB) += igb/ obj-$(CONFIG_IGB) += igb/
obj-$(CONFIG_IXGBE) += ixgbe/ obj-$(CONFIG_IXGBE) += ixgbe/
......
drivers/net/bonding/bond_main.c
View file @ 5bbc1722
...@@ -1189,22 +1189,21 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active) ...@@ -1189,22 +1189,21 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
if (new_active) { if (new_active) {
bond_set_slave_active_flags(new_active); bond_set_slave_active_flags(new_active);
}
if (new_active && bond->params.fail_over_mac) if (bond->params.fail_over_mac)
bond_do_fail_over_mac(bond, new_active, old_active); bond_do_fail_over_mac(bond, new_active,
old_active);
bond->send_grat_arp = bond->params.num_grat_arp; bond->send_grat_arp = bond->params.num_grat_arp;
if (bond->curr_active_slave && bond_send_gratuitous_arp(bond);
test_bit(__LINK_STATE_LINKWATCH_PENDING,
&bond->curr_active_slave->dev->state)) { write_unlock_bh(&bond->curr_slave_lock);
dprintk("delaying gratuitous arp on %s\n", read_unlock(&bond->lock);
bond->curr_active_slave->dev->name);
} else { netdev_bonding_change(bond->dev);
if (bond->send_grat_arp > 0) {
bond_send_gratuitous_arp(bond); read_lock(&bond->lock);
bond->send_grat_arp--; write_lock_bh(&bond->curr_slave_lock);
}
} }
} }
} }
...@@ -2235,17 +2234,6 @@ static int __bond_mii_monitor(struct bonding *bond, int have_locks) ...@@ -2235,17 +2234,6 @@ static int __bond_mii_monitor(struct bonding *bond, int have_locks)
* program could monitor the link itself if needed. * program could monitor the link itself if needed.
*/ */
if (bond->send_grat_arp) {
if (bond->curr_active_slave && test_bit(__LINK_STATE_LINKWATCH_PENDING,
&bond->curr_active_slave->dev->state))
dprintk("Needs to send gratuitous arp but not yet\n");
else {
dprintk("sending delayed gratuitous arp on on %s\n",
bond->curr_active_slave->dev->name);
bond_send_gratuitous_arp(bond);
bond->send_grat_arp--;
}
}
read_lock(&bond->curr_slave_lock); read_lock(&bond->curr_slave_lock);
oldcurrent = bond->curr_active_slave; oldcurrent = bond->curr_active_slave;
read_unlock(&bond->curr_slave_lock); read_unlock(&bond->curr_slave_lock);
...@@ -2486,6 +2474,13 @@ void bond_mii_monitor(struct work_struct *work) ...@@ -2486,6 +2474,13 @@ void bond_mii_monitor(struct work_struct *work)
read_unlock(&bond->lock); read_unlock(&bond->lock);
return; return;
} }
if (bond->send_grat_arp) {
read_lock(&bond->curr_slave_lock);
bond_send_gratuitous_arp(bond);
read_unlock(&bond->curr_slave_lock);
}
if (__bond_mii_monitor(bond, 0)) { if (__bond_mii_monitor(bond, 0)) {
read_unlock(&bond->lock); read_unlock(&bond->lock);
rtnl_lock(); rtnl_lock();
...@@ -2651,6 +2646,8 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave) ...@@ -2651,6 +2646,8 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
/* /*
* Kick out a gratuitous ARP for an IP on the bonding master plus one * Kick out a gratuitous ARP for an IP on the bonding master plus one
* for each VLAN above us. * for each VLAN above us.
*
* Caller must hold curr_slave_lock for read or better
*/ */
static void bond_send_gratuitous_arp(struct bonding *bond) static void bond_send_gratuitous_arp(struct bonding *bond)
{ {
...@@ -2660,9 +2657,13 @@ static void bond_send_gratuitous_arp(struct bonding *bond) ...@@ -2660,9 +2657,13 @@ static void bond_send_gratuitous_arp(struct bonding *bond)
dprintk("bond_send_grat_arp: bond %s slave %s\n", bond->dev->name, dprintk("bond_send_grat_arp: bond %s slave %s\n", bond->dev->name,
slave ? slave->dev->name : "NULL"); slave ? slave->dev->name : "NULL");
if (!slave)
if (!slave || !bond->send_grat_arp ||
test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
return; return;
bond->send_grat_arp--;
if (bond->master_ip) { if (bond->master_ip) {
bond_arp_send(slave->dev, ARPOP_REPLY, bond->master_ip, bond_arp_send(slave->dev, ARPOP_REPLY, bond->master_ip,
bond->master_ip, 0); bond->master_ip, 0);
...@@ -3166,6 +3167,12 @@ void bond_activebackup_arp_mon(struct work_struct *work) ...@@ -3166,6 +3167,12 @@ void bond_activebackup_arp_mon(struct work_struct *work)
if (bond->slave_cnt == 0) if (bond->slave_cnt == 0)
goto re_arm; goto re_arm;
if (bond->send_grat_arp) {
read_lock(&bond->curr_slave_lock);
bond_send_gratuitous_arp(bond);
read_unlock(&bond->curr_slave_lock);
}
if (bond_ab_arp_inspect(bond, delta_in_ticks)) { if (bond_ab_arp_inspect(bond, delta_in_ticks)) {
read_unlock(&bond->lock); read_unlock(&bond->lock);
rtnl_lock(); rtnl_lock();
...@@ -3840,6 +3847,7 @@ static int bond_close(struct net_device *bond_dev) ...@@ -3840,6 +3847,7 @@ static int bond_close(struct net_device *bond_dev)
write_lock_bh(&bond->lock); write_lock_bh(&bond->lock);
bond->send_grat_arp = 0;
/* signal timers not to re-arm */ /* signal timers not to re-arm */
bond->kill_timers = 1; bond->kill_timers = 1;
...@@ -4742,11 +4750,11 @@ static int bond_check_params(struct bond_params *params) ...@@ -4742,11 +4750,11 @@ static int bond_check_params(struct bond_params *params)
} }
} }
if (max_bonds < 1 || max_bonds > INT_MAX) { if (max_bonds < 0 || max_bonds > INT_MAX) {
printk(KERN_WARNING DRV_NAME printk(KERN_WARNING DRV_NAME
": Warning: max_bonds (%d) not in range %d-%d, so it " ": Warning: max_bonds (%d) not in range %d-%d, so it "
"was reset to BOND_DEFAULT_MAX_BONDS (%d)\n", "was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
max_bonds, 1, INT_MAX, BOND_DEFAULT_MAX_BONDS); max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
max_bonds = BOND_DEFAULT_MAX_BONDS; max_bonds = BOND_DEFAULT_MAX_BONDS;
} }
...@@ -4945,7 +4953,7 @@ static int bond_check_params(struct bond_params *params) ...@@ -4945,7 +4953,7 @@ static int bond_check_params(struct bond_params *params)
printk("\n"); printk("\n");
} else { } else if (max_bonds) {
/* miimon and arp_interval not set, we need one so things /* miimon and arp_interval not set, we need one so things
* work as expected, see bonding.txt for details * work as expected, see bonding.txt for details
*/ */
......
drivers/net/bonding/bond_sysfs.c
View file @ 5bbc1722
...@@ -53,7 +53,6 @@ extern struct bond_parm_tbl arp_validate_tbl[]; ...@@ -53,7 +53,6 @@ extern struct bond_parm_tbl arp_validate_tbl[];
extern struct bond_parm_tbl fail_over_mac_tbl[]; extern struct bond_parm_tbl fail_over_mac_tbl[];
static int expected_refcount = -1; static int expected_refcount = -1;
static struct class *netdev_class;
/*--------------------------- Data Structures -----------------------------*/ /*--------------------------- Data Structures -----------------------------*/
/* Bonding sysfs lock. Why can't we just use the subsystem lock? /* Bonding sysfs lock. Why can't we just use the subsystem lock?
...@@ -1447,19 +1446,9 @@ static struct attribute_group bonding_group = { ...@@ -1447,19 +1446,9 @@ static struct attribute_group bonding_group = {
*/ */
int bond_create_sysfs(void) int bond_create_sysfs(void)
{ {
int ret = 0; int ret;
struct bonding *firstbond;
/* get the netdev class pointer */
firstbond = container_of(bond_dev_list.next, struct bonding, bond_list);
if (!firstbond)
return -ENODEV;
netdev_class = firstbond->dev->dev.class;
if (!netdev_class)
return -ENODEV;
ret = class_create_file(netdev_class, &class_attr_bonding_masters); ret = netdev_class_create_file(&class_attr_bonding_masters);
/* /*
* Permit multiple loads of the module by ignoring failures to * Permit multiple loads of the module by ignoring failures to
* create the bonding_masters sysfs file. Bonding devices * create the bonding_masters sysfs file. Bonding devices
...@@ -1478,10 +1467,6 @@ int bond_create_sysfs(void) ...@@ -1478,10 +1467,6 @@ int bond_create_sysfs(void)
printk(KERN_ERR printk(KERN_ERR
"network device named %s already exists in sysfs", "network device named %s already exists in sysfs",
class_attr_bonding_masters.attr.name); class_attr_bonding_masters.attr.name);
else {
netdev_class = NULL;
return 0;
}
} }
return ret; return ret;
...@@ -1493,8 +1478,7 @@ int bond_create_sysfs(void) ...@@ -1493,8 +1478,7 @@ int bond_create_sysfs(void)
*/ */
void bond_destroy_sysfs(void) void bond_destroy_sysfs(void)
{ {
if (netdev_class) netdev_class_remove_file(&class_attr_bonding_masters);
class_remove_file(netdev_class, &class_attr_bonding_masters);
} }
/* /*
......
drivers/net/bonding/bonding.h
View file @ 5bbc1722
...@@ -22,8 +22,8 @@ ...@@ -22,8 +22,8 @@
#include "bond_3ad.h" #include "bond_3ad.h"
#include "bond_alb.h" #include "bond_alb.h"
#define DRV_VERSION "3.2.5" #define DRV_VERSION "3.3.0"
#define DRV_RELDATE "March 21, 2008" #define DRV_RELDATE "June 10, 2008"
#define DRV_NAME "bonding" #define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver" #define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
......
drivers/net/ibm_emac/Kconfig deleted 100644 → 0
View file @ 30902dc3
config IBM_EMAC
tristate "PowerPC 4xx on-chip Ethernet support"
depends on 4xx && !PPC_MERGE
help
This driver supports the PowerPC 4xx EMAC family of on-chip
Ethernet controllers.
config IBM_EMAC_RXB
int "Number of receive buffers"
depends on IBM_EMAC
default "128"
config IBM_EMAC_TXB
int "Number of transmit buffers"
depends on IBM_EMAC
default "64"
config IBM_EMAC_POLL_WEIGHT
int "MAL NAPI polling weight"
depends on IBM_EMAC
default "32"
config IBM_EMAC_RX_COPY_THRESHOLD
int "RX skb copy threshold (bytes)"
depends on IBM_EMAC
default "256"
config IBM_EMAC_RX_SKB_HEADROOM
int "Additional RX skb headroom (bytes)"
depends on IBM_EMAC
default "0"
help
Additional receive skb headroom. Note, that driver
will always reserve at least 2 bytes to make IP header
aligned, so usually there is no need to add any additional
headroom.
If unsure, set to 0.
config IBM_EMAC_PHY_RX_CLK_FIX
bool "PHY Rx clock workaround"
depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
help
Enable this if EMAC attached to a PHY which doesn't generate
RX clock if there is no link, if this is the case, you will
see "TX disable timeout" or "RX disable timeout" in the system
log.
If unsure, say N.
config IBM_EMAC_DEBUG
bool "Debugging"
depends on IBM_EMAC
default n
config IBM_EMAC_ZMII
bool
depends on IBM_EMAC && (NP405H || NP405L || 44x)
default y
config IBM_EMAC_RGMII
bool
depends on IBM_EMAC && 440GX
default y
config IBM_EMAC_TAH
bool
depends on IBM_EMAC && 440GX
default y
drivers/net/ibm_emac/Makefile deleted 100644 → 0
View file @ 30902dc3
#
# Makefile for the PowerPC 4xx on-chip ethernet driver
#
obj-$(CONFIG_IBM_EMAC) += ibm_emac.o
ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o
ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += ibm_emac_zmii.o
ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += ibm_emac_rgmii.o
ibm_emac-$(CONFIG_IBM_EMAC_TAH) += ibm_emac_tah.o
ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += ibm_emac_debug.o
drivers/net/ibm_emac/ibm_emac.h deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac.h
*
* Register definitions for PowerPC 4xx on-chip ethernet contoller
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* Based on original work by
* Matt Porter <mporter@kernel.crashing.org>
* Armin Kuster <akuster@mvista.com>
* Copyright 2002-2004 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __IBM_EMAC_H_
#define __IBM_EMAC_H_
#include <linux/types.h>
/* This is a simple check to prevent use of this driver on non-tested SoCs */
#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \
!defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \
!defined(CONFIG_440EP) && !defined(CONFIG_NP405H) && !defined(CONFIG_440SPE) && \
!defined(CONFIG_440GR)
#error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK"
#endif
/* EMAC registers Write Access rules */
struct emac_regs {
u32 mr0; /* special */
u32 mr1; /* Reset */
u32 tmr0; /* special */
u32 tmr1; /* special */
u32 rmr; /* Reset */
u32 isr; /* Always */
u32 iser; /* Reset */
u32 iahr; /* Reset, R, T */
u32 ialr; /* Reset, R, T */
u32 vtpid; /* Reset, R, T */
u32 vtci; /* Reset, R, T */
u32 ptr; /* Reset, T */
u32 iaht1; /* Reset, R */
u32 iaht2; /* Reset, R */
u32 iaht3; /* Reset, R */
u32 iaht4; /* Reset, R */
u32 gaht1; /* Reset, R */
u32 gaht2; /* Reset, R */
u32 gaht3; /* Reset, R */
u32 gaht4; /* Reset, R */
u32 lsah;
u32 lsal;
u32 ipgvr; /* Reset, T */
u32 stacr; /* special */
u32 trtr; /* special */
u32 rwmr; /* Reset */
u32 octx;
u32 ocrx;
u32 ipcr;
};
#if !defined(CONFIG_IBM_EMAC4)
#define EMAC_ETHTOOL_REGS_VER 0
#define EMAC_ETHTOOL_REGS_SIZE (sizeof(struct emac_regs) - sizeof(u32))
#else
#define EMAC_ETHTOOL_REGS_VER 1
#define EMAC_ETHTOOL_REGS_SIZE sizeof(struct emac_regs)
#endif
/* EMACx_MR0 */
#define EMAC_MR0_RXI 0x80000000
#define EMAC_MR0_TXI 0x40000000
#define EMAC_MR0_SRST 0x20000000
#define EMAC_MR0_TXE 0x10000000
#define EMAC_MR0_RXE 0x08000000
#define EMAC_MR0_WKE 0x04000000
/* EMACx_MR1 */
#define EMAC_MR1_FDE 0x80000000
#define EMAC_MR1_ILE 0x40000000
#define EMAC_MR1_VLE 0x20000000
#define EMAC_MR1_EIFC 0x10000000
#define EMAC_MR1_APP 0x08000000
#define EMAC_MR1_IST 0x01000000
#define EMAC_MR1_MF_MASK 0x00c00000
#define EMAC_MR1_MF_10 0x00000000
#define EMAC_MR1_MF_100 0x00400000
#if !defined(CONFIG_IBM_EMAC4)
#define EMAC_MR1_MF_1000 0x00000000
#define EMAC_MR1_MF_1000GPCS 0x00000000
#define EMAC_MR1_MF_IPPA(id) 0x00000000
#else
#define EMAC_MR1_MF_1000 0x00800000
#define EMAC_MR1_MF_1000GPCS 0x00c00000
#define EMAC_MR1_MF_IPPA(id) (((id) & 0x1f) << 6)
#endif
#define EMAC_TX_FIFO_SIZE 2048
#if !defined(CONFIG_IBM_EMAC4)
#define EMAC_MR1_RFS_4K 0x00300000
#define EMAC_MR1_RFS_16K 0x00000000
#define EMAC_RX_FIFO_SIZE(gige) 4096
#define EMAC_MR1_TFS_2K 0x00080000
#define EMAC_MR1_TR0_MULT 0x00008000
#define EMAC_MR1_JPSM 0x00000000
#define EMAC_MR1_MWSW_001 0x00000000
#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR0_MULT)
#else
#define EMAC_MR1_RFS_4K 0x00180000
#define EMAC_MR1_RFS_16K 0x00280000
#define EMAC_RX_FIFO_SIZE(gige) ((gige) ? 16384 : 4096)
#define EMAC_MR1_TFS_2K 0x00020000
#define EMAC_MR1_TR 0x00008000
#define EMAC_MR1_MWSW_001 0x00001000
#define EMAC_MR1_JPSM 0x00000800
#define EMAC_MR1_OBCI_MASK 0x00000038
#define EMAC_MR1_OBCI_50 0x00000000
#define EMAC_MR1_OBCI_66 0x00000008
#define EMAC_MR1_OBCI_83 0x00000010
#define EMAC_MR1_OBCI_100 0x00000018
#define EMAC_MR1_OBCI_100P 0x00000020
#define EMAC_MR1_OBCI(freq) ((freq) <= 50 ? EMAC_MR1_OBCI_50 : \
(freq) <= 66 ? EMAC_MR1_OBCI_66 : \
(freq) <= 83 ? EMAC_MR1_OBCI_83 : \
(freq) <= 100 ? EMAC_MR1_OBCI_100 : EMAC_MR1_OBCI_100P)
#define EMAC_MR1_BASE(opb) (EMAC_MR1_TFS_2K | EMAC_MR1_TR | \
EMAC_MR1_OBCI(opb))
#endif
/* EMACx_TMR0 */
#define EMAC_TMR0_GNP 0x80000000
#if !defined(CONFIG_IBM_EMAC4)
#define EMAC_TMR0_DEFAULT 0x00000000
#else
#define EMAC_TMR0_TFAE_2_32 0x00000001
#define EMAC_TMR0_TFAE_4_64 0x00000002
#define EMAC_TMR0_TFAE_8_128 0x00000003
#define EMAC_TMR0_TFAE_16_256 0x00000004
#define EMAC_TMR0_TFAE_32_512 0x00000005
#define EMAC_TMR0_TFAE_64_1024 0x00000006
#define EMAC_TMR0_TFAE_128_2048 0x00000007
#define EMAC_TMR0_DEFAULT EMAC_TMR0_TFAE_2_32
#endif
#define EMAC_TMR0_XMIT (EMAC_TMR0_GNP | EMAC_TMR0_DEFAULT)
/* EMACx_TMR1 */
/* IBM manuals are not very clear here.
* This is my interpretation of how things are. --ebs
*/
#if defined(CONFIG_40x)
#define EMAC_FIFO_ENTRY_SIZE 8
#define EMAC_MAL_BURST_SIZE (16 * 4)
#else
#define EMAC_FIFO_ENTRY_SIZE 16
#define EMAC_MAL_BURST_SIZE (64 * 4)
#endif
#if !defined(CONFIG_IBM_EMAC4)
#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0xff) << 16))
#else
#define EMAC_TMR1(l,h) (((l) << 27) | (((h) & 0x3ff) << 14))
#endif
/* EMACx_RMR */
#define EMAC_RMR_SP 0x80000000
#define EMAC_RMR_SFCS 0x40000000
#define EMAC_RMR_RRP 0x20000000
#define EMAC_RMR_RFP 0x10000000
#define EMAC_RMR_ROP 0x08000000
#define EMAC_RMR_RPIR 0x04000000
#define EMAC_RMR_PPP 0x02000000
#define EMAC_RMR_PME 0x01000000
#define EMAC_RMR_PMME 0x00800000
#define EMAC_RMR_IAE 0x00400000
#define EMAC_RMR_MIAE 0x00200000
#define EMAC_RMR_BAE 0x00100000
#define EMAC_RMR_MAE 0x00080000
#if !defined(CONFIG_IBM_EMAC4)
#define EMAC_RMR_BASE 0x00000000
#else
#define EMAC_RMR_RFAF_2_32 0x00000001
#define EMAC_RMR_RFAF_4_64 0x00000002
#define EMAC_RMR_RFAF_8_128 0x00000003
#define EMAC_RMR_RFAF_16_256 0x00000004
#define EMAC_RMR_RFAF_32_512 0x00000005
#define EMAC_RMR_RFAF_64_1024 0x00000006
#define EMAC_RMR_RFAF_128_2048 0x00000007
#define EMAC_RMR_BASE EMAC_RMR_RFAF_128_2048
#endif
/* EMACx_ISR & EMACx_ISER */
#if !defined(CONFIG_IBM_EMAC4)
#define EMAC_ISR_TXPE 0x00000000
#define EMAC_ISR_RXPE 0x00000000
#define EMAC_ISR_TXUE 0x00000000
#define EMAC_ISR_RXOE 0x00000000
#else
#define EMAC_ISR_TXPE 0x20000000
#define EMAC_ISR_RXPE 0x10000000
#define EMAC_ISR_TXUE 0x08000000
#define EMAC_ISR_RXOE 0x04000000
#endif
#define EMAC_ISR_OVR 0x02000000
#define EMAC_ISR_PP 0x01000000
#define EMAC_ISR_BP 0x00800000
#define EMAC_ISR_RP 0x00400000
#define EMAC_ISR_SE 0x00200000
#define EMAC_ISR_ALE 0x00100000
#define EMAC_ISR_BFCS 0x00080000
#define EMAC_ISR_PTLE 0x00040000
#define EMAC_ISR_ORE 0x00020000
#define EMAC_ISR_IRE 0x00010000
#define EMAC_ISR_SQE 0x00000080
#define EMAC_ISR_TE 0x00000040
#define EMAC_ISR_MOS 0x00000002
#define EMAC_ISR_MOF 0x00000001
/* EMACx_STACR */
#define EMAC_STACR_PHYD_MASK 0xffff
#define EMAC_STACR_PHYD_SHIFT 16
#define EMAC_STACR_OC 0x00008000
#define EMAC_STACR_PHYE 0x00004000
#define EMAC_STACR_STAC_MASK 0x00003000
#define EMAC_STACR_STAC_READ 0x00001000
#define EMAC_STACR_STAC_WRITE 0x00002000
#if !defined(CONFIG_IBM_EMAC4)
#define EMAC_STACR_OPBC_MASK 0x00000C00
#define EMAC_STACR_OPBC_50 0x00000000
#define EMAC_STACR_OPBC_66 0x00000400
#define EMAC_STACR_OPBC_83 0x00000800
#define EMAC_STACR_OPBC_100 0x00000C00
#define EMAC_STACR_OPBC(freq) ((freq) <= 50 ? EMAC_STACR_OPBC_50 : \
(freq) <= 66 ? EMAC_STACR_OPBC_66 : \
(freq) <= 83 ? EMAC_STACR_OPBC_83 : EMAC_STACR_OPBC_100)
#define EMAC_STACR_BASE(opb) EMAC_STACR_OPBC(opb)
#else
#define EMAC_STACR_BASE(opb) 0x00000000
#endif
#define EMAC_STACR_PCDA_MASK 0x1f
#define EMAC_STACR_PCDA_SHIFT 5
#define EMAC_STACR_PRA_MASK 0x1f
/*
* For the 440SPe, AMCC inexplicably changed the polarity of
* the "operation complete" bit in the MII control register.
*/
#if defined(CONFIG_440SPE)
static inline int emac_phy_done(u32 stacr)
{
return !(stacr & EMAC_STACR_OC);
};
#define EMAC_STACR_START EMAC_STACR_OC
#else /* CONFIG_440SPE */
static inline int emac_phy_done(u32 stacr)
{
return stacr & EMAC_STACR_OC;
};
#define EMAC_STACR_START 0
#endif /* !CONFIG_440SPE */
/* EMACx_TRTR */
#if !defined(CONFIG_IBM_EMAC4)
#define EMAC_TRTR_SHIFT 27
#else
#define EMAC_TRTR_SHIFT 24
#endif
#define EMAC_TRTR(size) ((((size) >> 6) - 1) << EMAC_TRTR_SHIFT)
/* EMACx_RWMR */
#if !defined(CONFIG_IBM_EMAC4)
#define EMAC_RWMR(l,h) (((l) << 23) | ( ((h) & 0x1ff) << 7))
#else
#define EMAC_RWMR(l,h) (((l) << 22) | ( ((h) & 0x3ff) << 6))
#endif
/* EMAC specific TX descriptor control fields (write access) */
#define EMAC_TX_CTRL_GFCS 0x0200
#define EMAC_TX_CTRL_GP 0x0100
#define EMAC_TX_CTRL_ISA 0x0080
#define EMAC_TX_CTRL_RSA 0x0040
#define EMAC_TX_CTRL_IVT 0x0020
#define EMAC_TX_CTRL_RVT 0x0010
#define EMAC_TX_CTRL_TAH_CSUM 0x000e
/* EMAC specific TX descriptor status fields (read access) */
#define EMAC_TX_ST_BFCS 0x0200
#define EMAC_TX_ST_LCS 0x0080
#define EMAC_TX_ST_ED 0x0040
#define EMAC_TX_ST_EC 0x0020
#define EMAC_TX_ST_LC 0x0010
#define EMAC_TX_ST_MC 0x0008
#define EMAC_TX_ST_SC 0x0004
#define EMAC_TX_ST_UR 0x0002
#define EMAC_TX_ST_SQE 0x0001
#if !defined(CONFIG_IBM_EMAC_TAH)
#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
EMAC_TX_ST_EC | EMAC_TX_ST_LC | \
EMAC_TX_ST_MC | EMAC_TX_ST_UR))
#else
#define EMAC_IS_BAD_TX(v) ((v) & (EMAC_TX_ST_LCS | EMAC_TX_ST_ED | \
EMAC_TX_ST_EC | EMAC_TX_ST_LC))
#endif
/* EMAC specific RX descriptor status fields (read access) */
#define EMAC_RX_ST_OE 0x0200
#define EMAC_RX_ST_PP 0x0100
#define EMAC_RX_ST_BP 0x0080
#define EMAC_RX_ST_RP 0x0040
#define EMAC_RX_ST_SE 0x0020
#define EMAC_RX_ST_AE 0x0010
#define EMAC_RX_ST_BFCS 0x0008
#define EMAC_RX_ST_PTL 0x0004
#define EMAC_RX_ST_ORE 0x0002
#define EMAC_RX_ST_IRE 0x0001
#define EMAC_RX_TAH_BAD_CSUM 0x0003
#define EMAC_BAD_RX_MASK (EMAC_RX_ST_OE | EMAC_RX_ST_BP | \
EMAC_RX_ST_RP | EMAC_RX_ST_SE | \
EMAC_RX_ST_AE | EMAC_RX_ST_BFCS | \
EMAC_RX_ST_PTL | EMAC_RX_ST_ORE | \
EMAC_RX_ST_IRE )
#endif /* __IBM_EMAC_H_ */
drivers/net/ibm_emac/ibm_emac_core.c deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_core.c
*
* Driver for PowerPC 4xx on-chip ethernet controller.
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* Based on original work by
* Matt Porter <mporter@kernel.crashing.org>
* (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Armin Kuster <akuster@mvista.com>
* Johnnie Peters <jpeters@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/crc32.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/bitops.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/uaccess.h>
#include <asm/ocp.h>
#include "ibm_emac_core.h"
#include "ibm_emac_debug.h"
/*
* Lack of dma_unmap_???? calls is intentional.
*
* API-correct usage requires additional support state information to be
* maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to
* EMAC design (e.g. TX buffer passed from network stack can be split into
* several BDs, dma_map_single/dma_map_page can be used to map particular BD),
* maintaining such information will add additional overhead.
* Current DMA API implementation for 4xx processors only ensures cache coherency
* and dma_unmap_???? routines are empty and are likely to stay this way.
* I decided to omit dma_unmap_??? calls because I don't want to add additional
* complexity just for the sake of following some abstract API, when it doesn't
* add any real benefit to the driver. I understand that this decision maybe
* controversial, but I really tried to make code API-correct and efficient
* at the same time and didn't come up with code I liked :(. --ebs
*/
#define DRV_NAME "emac"
#define DRV_VERSION "3.54"
#define DRV_DESC "PPC 4xx OCP EMAC driver"
MODULE_DESCRIPTION(DRV_DESC);
MODULE_AUTHOR
("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>");
MODULE_LICENSE("GPL");
/* minimum number of free TX descriptors required to wake up TX process */
#define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4)
/* If packet size is less than this number, we allocate small skb and copy packet
* contents into it instead of just sending original big skb up
*/
#define EMAC_RX_COPY_THRESH CONFIG_IBM_EMAC_RX_COPY_THRESHOLD
/* Since multiple EMACs share MDIO lines in various ways, we need
* to avoid re-using the same PHY ID in cases where the arch didn't
* setup precise phy_map entries
*/
static u32 busy_phy_map;
#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && \
(defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR))
/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us
* with PHY RX clock problem.
* 440EP/440GR has more sane SDR0_MFR register implementation than 440GX, which
* also allows controlling each EMAC clock
*/
static inline void EMAC_RX_CLK_TX(int idx)
{
unsigned long flags;
local_irq_save(flags);
#if defined(CONFIG_405EP)
mtdcr(0xf3, mfdcr(0xf3) | (1 << idx));
#else /* CONFIG_440EP || CONFIG_440GR */
SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx));
#endif
local_irq_restore(flags);
}
static inline void EMAC_RX_CLK_DEFAULT(int idx)
{
unsigned long flags;
local_irq_save(flags);
#if defined(CONFIG_405EP)
mtdcr(0xf3, mfdcr(0xf3) & ~(1 << idx));
#else /* CONFIG_440EP */
SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~(0x08000000 >> idx));
#endif
local_irq_restore(flags);
}
#else
#define EMAC_RX_CLK_TX(idx) ((void)0)
#define EMAC_RX_CLK_DEFAULT(idx) ((void)0)
#endif
#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && defined(CONFIG_440GX)
/* We can switch Ethernet clock to the internal source through SDR0_MFR[ECS],
* unfortunately this is less flexible than 440EP case, because it's a global
* setting for all EMACs, therefore we do this clock trick only during probe.
*/
#define EMAC_CLK_INTERNAL SDR_WRITE(DCRN_SDR_MFR, \
SDR_READ(DCRN_SDR_MFR) | 0x08000000)
#define EMAC_CLK_EXTERNAL SDR_WRITE(DCRN_SDR_MFR, \
SDR_READ(DCRN_SDR_MFR) & ~0x08000000)
#else
#define EMAC_CLK_INTERNAL ((void)0)
#define EMAC_CLK_EXTERNAL ((void)0)
#endif
/* I don't want to litter system log with timeout errors
* when we have brain-damaged PHY.
*/
static inline void emac_report_timeout_error(struct ocp_enet_private *dev,
const char *error)
{
#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
DBG("%d: %s" NL, dev->def->index, error);
#else
if (net_ratelimit())
printk(KERN_ERR "emac%d: %s\n", dev->def->index, error);
#endif
}
/* PHY polling intervals */
#define PHY_POLL_LINK_ON HZ
#define PHY_POLL_LINK_OFF (HZ / 5)
/* Graceful stop timeouts in us.
* We should allow up to 1 frame time (full-duplex, ignoring collisions)
*/
#define STOP_TIMEOUT_10 1230
#define STOP_TIMEOUT_100 124
#define STOP_TIMEOUT_1000 13
#define STOP_TIMEOUT_1000_JUMBO 73
/* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */
static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = {
"rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum",
"tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom",
"rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu",
"rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet",
"rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error",
"rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range",
"rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun",
"rx_bad_packet", "rx_runt_packet", "rx_short_event",
"rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long",
"rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors",
"tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral",
"tx_bd_excessive_collisions", "tx_bd_late_collision",
"tx_bd_multple_collisions", "tx_bd_single_collision",
"tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe",
"tx_errors"
};
static irqreturn_t emac_irq(int irq, void *dev_instance);
static void emac_clean_tx_ring(struct ocp_enet_private *dev);
static inline int emac_phy_supports_gige(int phy_mode)
{
return phy_mode == PHY_MODE_GMII ||
phy_mode == PHY_MODE_RGMII ||
phy_mode == PHY_MODE_TBI ||
phy_mode == PHY_MODE_RTBI;
}
static inline int emac_phy_gpcs(int phy_mode)
{
return phy_mode == PHY_MODE_TBI ||
phy_mode == PHY_MODE_RTBI;
}
static inline void emac_tx_enable(struct ocp_enet_private *dev)
{
struct emac_regs __iomem *p = dev->emacp;
unsigned long flags;
u32 r;
local_irq_save(flags);
DBG("%d: tx_enable" NL, dev->def->index);
r = in_be32(&p->mr0);
if (!(r & EMAC_MR0_TXE))
out_be32(&p->mr0, r | EMAC_MR0_TXE);
local_irq_restore(flags);
}
static void emac_tx_disable(struct ocp_enet_private *dev)
{
struct emac_regs __iomem *p = dev->emacp;
unsigned long flags;
u32 r;
local_irq_save(flags);
DBG("%d: tx_disable" NL, dev->def->index);
r = in_be32(&p->mr0);
if (r & EMAC_MR0_TXE) {
int n = dev->stop_timeout;
out_be32(&p->mr0, r & ~EMAC_MR0_TXE);
while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) {
udelay(1);
--n;
}
if (unlikely(!n))
emac_report_timeout_error(dev, "TX disable timeout");
}
local_irq_restore(flags);
}
static void emac_rx_enable(struct ocp_enet_private *dev)
{
struct emac_regs __iomem *p = dev->emacp;
unsigned long flags;
u32 r;
local_irq_save(flags);
if (unlikely(dev->commac.rx_stopped))
goto out;
DBG("%d: rx_enable" NL, dev->def->index);
r = in_be32(&p->mr0);
if (!(r & EMAC_MR0_RXE)) {
if (unlikely(!(r & EMAC_MR0_RXI))) {
/* Wait if previous async disable is still in progress */
int n = dev->stop_timeout;
while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) {
udelay(1);
--n;
}
if (unlikely(!n))
emac_report_timeout_error(dev,
"RX disable timeout");
}
out_be32(&p->mr0, r | EMAC_MR0_RXE);
}
out:
local_irq_restore(flags);
}
static void emac_rx_disable(struct ocp_enet_private *dev)
{
struct emac_regs __iomem *p = dev->emacp;
unsigned long flags;
u32 r;
local_irq_save(flags);
DBG("%d: rx_disable" NL, dev->def->index);
r = in_be32(&p->mr0);
if (r & EMAC_MR0_RXE) {
int n = dev->stop_timeout;
out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) {
udelay(1);
--n;
}
if (unlikely(!n))
emac_report_timeout_error(dev, "RX disable timeout");
}
local_irq_restore(flags);
}
static inline void emac_rx_disable_async(struct ocp_enet_private *dev)
{
struct emac_regs __iomem *p = dev->emacp;
unsigned long flags;
u32 r;
local_irq_save(flags);
DBG("%d: rx_disable_async" NL, dev->def->index);
r = in_be32(&p->mr0);
if (r & EMAC_MR0_RXE)
out_be32(&p->mr0, r & ~EMAC_MR0_RXE);
local_irq_restore(flags);
}
static int emac_reset(struct ocp_enet_private *dev)
{
struct emac_regs __iomem *p = dev->emacp;
unsigned long flags;
int n = 20;
DBG("%d: reset" NL, dev->def->index);
local_irq_save(flags);
if (!dev->reset_failed) {
/* 40x erratum suggests stopping RX channel before reset,
* we stop TX as well
*/
emac_rx_disable(dev);
emac_tx_disable(dev);
}
out_be32(&p->mr0, EMAC_MR0_SRST);
while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n)
--n;
local_irq_restore(flags);
if (n) {
dev->reset_failed = 0;
return 0;
} else {
emac_report_timeout_error(dev, "reset timeout");
dev->reset_failed = 1;
return -ETIMEDOUT;
}
}
static void emac_hash_mc(struct ocp_enet_private *dev)
{
struct emac_regs __iomem *p = dev->emacp;
u16 gaht[4] = { 0 };
struct dev_mc_list *dmi;
DBG("%d: hash_mc %d" NL, dev->def->index, dev->ndev->mc_count);
for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) {
int bit;
DECLARE_MAC_BUF(mac);
DBG2("%d: mc %s" NL,
dev->def->index, print_mac(mac, dmi->dmi_addr));
bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26);
gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f);
}
out_be32(&p->gaht1, gaht[0]);
out_be32(&p->gaht2, gaht[1]);
out_be32(&p->gaht3, gaht[2]);
out_be32(&p->gaht4, gaht[3]);
}
static inline u32 emac_iff2rmr(struct net_device *ndev)
{
u32 r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE |
EMAC_RMR_BASE;
if (ndev->flags & IFF_PROMISC)
r |= EMAC_RMR_PME;
else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32)
r |= EMAC_RMR_PMME;
else if (ndev->mc_count > 0)
r |= EMAC_RMR_MAE;
return r;
}
static inline int emac_opb_mhz(void)
{
return (ocp_sys_info.opb_bus_freq + 500000) / 1000000;
}
/* BHs disabled */
static int emac_configure(struct ocp_enet_private *dev)
{
struct emac_regs __iomem *p = dev->emacp;
struct net_device *ndev = dev->ndev;
int gige;
u32 r;
DBG("%d: configure" NL, dev->def->index);
if (emac_reset(dev) < 0)
return -ETIMEDOUT;
tah_reset(dev->tah_dev);
/* Mode register */
r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST;
if (dev->phy.duplex == DUPLEX_FULL)
r |= EMAC_MR1_FDE | EMAC_MR1_MWSW_001;
dev->stop_timeout = STOP_TIMEOUT_10;
switch (dev->phy.speed) {
case SPEED_1000:
if (emac_phy_gpcs(dev->phy.mode)) {
r |= EMAC_MR1_MF_1000GPCS |
EMAC_MR1_MF_IPPA(dev->phy.address);
/* Put some arbitrary OUI, Manuf & Rev IDs so we can
* identify this GPCS PHY later.
*/
out_be32(&p->ipcr, 0xdeadbeef);
} else
r |= EMAC_MR1_MF_1000;
r |= EMAC_MR1_RFS_16K;
gige = 1;
if (dev->ndev->mtu > ETH_DATA_LEN) {
r |= EMAC_MR1_JPSM;
dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO;
} else
dev->stop_timeout = STOP_TIMEOUT_1000;
break;
case SPEED_100:
r |= EMAC_MR1_MF_100;
dev->stop_timeout = STOP_TIMEOUT_100;
/* Fall through */
default:
r |= EMAC_MR1_RFS_4K;
gige = 0;
break;
}
if (dev->rgmii_dev)
rgmii_set_speed(dev->rgmii_dev, dev->rgmii_input,
dev->phy.speed);
else
zmii_set_speed(dev->zmii_dev, dev->zmii_input, dev->phy.speed);
#if !defined(CONFIG_40x)
/* on 40x erratum forces us to NOT use integrated flow control,
* let's hope it works on 44x ;)
*/
if (dev->phy.duplex == DUPLEX_FULL) {
if (dev->phy.pause)
r |= EMAC_MR1_EIFC | EMAC_MR1_APP;
else if (dev->phy.asym_pause)
r |= EMAC_MR1_APP;
}
#endif
out_be32(&p->mr1, r);
/* Set individual MAC address */
out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]);
out_be32(&p->ialr, (ndev->dev_addr[2] << 24) |
(ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) |
ndev->dev_addr[5]);
/* VLAN Tag Protocol ID */
out_be32(&p->vtpid, 0x8100);
/* Receive mode register */
r = emac_iff2rmr(ndev);
if (r & EMAC_RMR_MAE)
emac_hash_mc(dev);
out_be32(&p->rmr, r);
/* FIFOs thresholds */
r = EMAC_TMR1((EMAC_MAL_BURST_SIZE / EMAC_FIFO_ENTRY_SIZE) + 1,
EMAC_TX_FIFO_SIZE / 2 / EMAC_FIFO_ENTRY_SIZE);
out_be32(&p->tmr1, r);
out_be32(&p->trtr, EMAC_TRTR(EMAC_TX_FIFO_SIZE / 2));
/* PAUSE frame is sent when RX FIFO reaches its high-water mark,
there should be still enough space in FIFO to allow the our link
partner time to process this frame and also time to send PAUSE
frame itself.
Here is the worst case scenario for the RX FIFO "headroom"
(from "The Switch Book") (100Mbps, without preamble, inter-frame gap):
1) One maximum-length frame on TX 1522 bytes
2) One PAUSE frame time 64 bytes
3) PAUSE frame decode time allowance 64 bytes
4) One maximum-length frame on RX 1522 bytes
5) Round-trip propagation delay of the link (100Mb) 15 bytes
----------
3187 bytes
I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes)
low-water mark to RX_FIFO_SIZE / 8 (512 bytes)
*/
r = EMAC_RWMR(EMAC_RX_FIFO_SIZE(gige) / 8 / EMAC_FIFO_ENTRY_SIZE,
EMAC_RX_FIFO_SIZE(gige) / 4 / EMAC_FIFO_ENTRY_SIZE);
out_be32(&p->rwmr, r);
/* Set PAUSE timer to the maximum */
out_be32(&p->ptr, 0xffff);
/* IRQ sources */
out_be32(&p->iser, EMAC_ISR_TXPE | EMAC_ISR_RXPE | /* EMAC_ISR_TXUE |
EMAC_ISR_RXOE | */ EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE |
EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE |
EMAC_ISR_IRE | EMAC_ISR_TE);
/* We need to take GPCS PHY out of isolate mode after EMAC reset */
if (emac_phy_gpcs(dev->phy.mode))
mii_reset_phy(&dev->phy);
return 0;
}
/* BHs disabled */
static void emac_reinitialize(struct ocp_enet_private *dev)
{
DBG("%d: reinitialize" NL, dev->def->index);
if (!emac_configure(dev)) {
emac_tx_enable(dev);
emac_rx_enable(dev);
}
}
/* BHs disabled */
static void emac_full_tx_reset(struct net_device *ndev)
{
struct ocp_enet_private *dev = ndev->priv;
struct ocp_func_emac_data *emacdata = dev->def->additions;
DBG("%d: full_tx_reset" NL, dev->def->index);
emac_tx_disable(dev);
mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
emac_clean_tx_ring(dev);
dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0;
emac_configure(dev);
mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
emac_tx_enable(dev);
emac_rx_enable(dev);
netif_wake_queue(ndev);
}
static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg)
{
struct emac_regs __iomem *p = dev->emacp;
u32 r;
int n;
DBG2("%d: mdio_read(%02x,%02x)" NL, dev->def->index, id, reg);
/* Enable proper MDIO port */
zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
/* Wait for management interface to become idle */
n = 10;
while (!emac_phy_done(in_be32(&p->stacr))) {
udelay(1);
if (!--n)
goto to;
}
/* Issue read command */
out_be32(&p->stacr,
EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ |
(reg & EMAC_STACR_PRA_MASK)
| ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT)
| EMAC_STACR_START);
/* Wait for read to complete */
n = 100;
while (!emac_phy_done(r = in_be32(&p->stacr))) {
udelay(1);
if (!--n)
goto to;
}
if (unlikely(r & EMAC_STACR_PHYE)) {
DBG("%d: mdio_read(%02x, %02x) failed" NL, dev->def->index,
id, reg);
return -EREMOTEIO;
}
r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK);
DBG2("%d: mdio_read -> %04x" NL, dev->def->index, r);
return r;
to:
DBG("%d: MII management interface timeout (read)" NL, dev->def->index);
return -ETIMEDOUT;
}
static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg,
u16 val)
{
struct emac_regs __iomem *p = dev->emacp;
int n;
DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg,
val);
/* Enable proper MDIO port */
zmii_enable_mdio(dev->zmii_dev, dev->zmii_input);
/* Wait for management interface to be idle */
n = 10;
while (!emac_phy_done(in_be32(&p->stacr))) {
udelay(1);
if (!--n)
goto to;
}
/* Issue write command */
out_be32(&p->stacr,
EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE |
(reg & EMAC_STACR_PRA_MASK) |
((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) |
(val << EMAC_STACR_PHYD_SHIFT) | EMAC_STACR_START);
/* Wait for write to complete */
n = 100;
while (!emac_phy_done(in_be32(&p->stacr))) {
udelay(1);
if (!--n)
goto to;
}
return;
to:
DBG("%d: MII management interface timeout (write)" NL, dev->def->index);
}
static int emac_mdio_read(struct net_device *ndev, int id, int reg)
{
struct ocp_enet_private *dev = ndev->priv;
int res;
local_bh_disable();
res = __emac_mdio_read(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
(u8) reg);
local_bh_enable();
return res;
}
static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val)
{
struct ocp_enet_private *dev = ndev->priv;
local_bh_disable();
__emac_mdio_write(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id,
(u8) reg, (u16) val);
local_bh_enable();
}
/* BHs disabled */
static void emac_set_multicast_list(struct net_device *ndev)
{
struct ocp_enet_private *dev = ndev->priv;
struct emac_regs __iomem *p = dev->emacp;
u32 rmr = emac_iff2rmr(ndev);
DBG("%d: multicast %08x" NL, dev->def->index, rmr);
BUG_ON(!netif_running(dev->ndev));
/* I decided to relax register access rules here to avoid
* full EMAC reset.
*
* There is a real problem with EMAC4 core if we use MWSW_001 bit
* in MR1 register and do a full EMAC reset.
* One TX BD status update is delayed and, after EMAC reset, it
* never happens, resulting in TX hung (it'll be recovered by TX
* timeout handler eventually, but this is just gross).
* So we either have to do full TX reset or try to cheat here :)
*
* The only required change is to RX mode register, so I *think* all
* we need is just to stop RX channel. This seems to work on all
* tested SoCs. --ebs
*/
emac_rx_disable(dev);
if (rmr & EMAC_RMR_MAE)
emac_hash_mc(dev);
out_be32(&p->rmr, rmr);
emac_rx_enable(dev);
}
/* BHs disabled */
static int emac_resize_rx_ring(struct ocp_enet_private *dev, int new_mtu)
{
struct ocp_func_emac_data *emacdata = dev->def->additions;
int rx_sync_size = emac_rx_sync_size(new_mtu);
int rx_skb_size = emac_rx_skb_size(new_mtu);
int i, ret = 0;
emac_rx_disable(dev);
mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
if (dev->rx_sg_skb) {
++dev->estats.rx_dropped_resize;
dev_kfree_skb(dev->rx_sg_skb);
dev->rx_sg_skb = NULL;
}
/* Make a first pass over RX ring and mark BDs ready, dropping
* non-processed packets on the way. We need this as a separate pass
* to simplify error recovery in the case of allocation failure later.
*/
for (i = 0; i < NUM_RX_BUFF; ++i) {
if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST)
++dev->estats.rx_dropped_resize;
dev->rx_desc[i].data_len = 0;
dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY |
(i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
}
/* Reallocate RX ring only if bigger skb buffers are required */
if (rx_skb_size <= dev->rx_skb_size)
goto skip;
/* Second pass, allocate new skbs */
for (i = 0; i < NUM_RX_BUFF; ++i) {
struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC);
if (!skb) {
ret = -ENOMEM;
goto oom;
}
BUG_ON(!dev->rx_skb[i]);
dev_kfree_skb(dev->rx_skb[i]);
skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
dev->rx_desc[i].data_ptr =
dma_map_single(dev->ldev, skb->data - 2, rx_sync_size,
DMA_FROM_DEVICE) + 2;
dev->rx_skb[i] = skb;
}
skip:
/* Check if we need to change "Jumbo" bit in MR1 */
if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) {
/* This is to prevent starting RX channel in emac_rx_enable() */
dev->commac.rx_stopped = 1;
dev->ndev->mtu = new_mtu;
emac_full_tx_reset(dev->ndev);
}
mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(new_mtu));
oom:
/* Restart RX */
dev->commac.rx_stopped = dev->rx_slot = 0;
mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
emac_rx_enable(dev);
return ret;
}
/* Process ctx, rtnl_lock semaphore */
static int emac_change_mtu(struct net_device *ndev, int new_mtu)
{
struct ocp_enet_private *dev = ndev->priv;
int ret = 0;
if (new_mtu < EMAC_MIN_MTU || new_mtu > EMAC_MAX_MTU)
return -EINVAL;
DBG("%d: change_mtu(%d)" NL, dev->def->index, new_mtu);
local_bh_disable();
if (netif_running(ndev)) {
/* Check if we really need to reinitalize RX ring */
if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu))
ret = emac_resize_rx_ring(dev, new_mtu);
}
if (!ret) {
ndev->mtu = new_mtu;
dev->rx_skb_size = emac_rx_skb_size(new_mtu);
dev->rx_sync_size = emac_rx_sync_size(new_mtu);
}
local_bh_enable();
return ret;
}
static void emac_clean_tx_ring(struct ocp_enet_private *dev)
{
int i;
for (i = 0; i < NUM_TX_BUFF; ++i) {
if (dev->tx_skb[i]) {
dev_kfree_skb(dev->tx_skb[i]);
dev->tx_skb[i] = NULL;
if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY)
++dev->estats.tx_dropped;
}
dev->tx_desc[i].ctrl = 0;
dev->tx_desc[i].data_ptr = 0;
}
}
static void emac_clean_rx_ring(struct ocp_enet_private *dev)
{
int i;
for (i = 0; i < NUM_RX_BUFF; ++i)
if (dev->rx_skb[i]) {
dev->rx_desc[i].ctrl = 0;
dev_kfree_skb(dev->rx_skb[i]);
dev->rx_skb[i] = NULL;
dev->rx_desc[i].data_ptr = 0;
}
if (dev->rx_sg_skb) {
dev_kfree_skb(dev->rx_sg_skb);
dev->rx_sg_skb = NULL;
}
}
static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot,
gfp_t flags)
{
struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags);
if (unlikely(!skb))
return -ENOMEM;
dev->rx_skb[slot] = skb;
dev->rx_desc[slot].data_len = 0;
skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
dev->rx_desc[slot].data_ptr =
dma_map_single(dev->ldev, skb->data - 2, dev->rx_sync_size,
DMA_FROM_DEVICE) + 2;
barrier();
dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
(slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
return 0;
}
static void emac_print_link_status(struct ocp_enet_private *dev)
{
if (netif_carrier_ok(dev->ndev))
printk(KERN_INFO "%s: link is up, %d %s%s\n",
dev->ndev->name, dev->phy.speed,
dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX",
dev->phy.pause ? ", pause enabled" :
dev->phy.asym_pause ? ", assymetric pause enabled" : "");
else
printk(KERN_INFO "%s: link is down\n", dev->ndev->name);
}
/* Process ctx, rtnl_lock semaphore */
static int emac_open(struct net_device *ndev)
{
struct ocp_enet_private *dev = ndev->priv;
struct ocp_func_emac_data *emacdata = dev->def->additions;
int err, i;
DBG("%d: open" NL, dev->def->index);
/* Setup error IRQ handler */
err = request_irq(dev->def->irq, emac_irq, 0, "EMAC", dev);
if (err) {
printk(KERN_ERR "%s: failed to request IRQ %d\n",
ndev->name, dev->def->irq);
return err;
}
/* Allocate RX ring */
for (i = 0; i < NUM_RX_BUFF; ++i)
if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) {
printk(KERN_ERR "%s: failed to allocate RX ring\n",
ndev->name);
goto oom;
}
local_bh_disable();
dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot =
dev->commac.rx_stopped = 0;
dev->rx_sg_skb = NULL;
if (dev->phy.address >= 0) {
int link_poll_interval;
if (dev->phy.def->ops->poll_link(&dev->phy)) {
dev->phy.def->ops->read_link(&dev->phy);
EMAC_RX_CLK_DEFAULT(dev->def->index);
netif_carrier_on(dev->ndev);
link_poll_interval = PHY_POLL_LINK_ON;
} else {
EMAC_RX_CLK_TX(dev->def->index);
netif_carrier_off(dev->ndev);
link_poll_interval = PHY_POLL_LINK_OFF;
}
mod_timer(&dev->link_timer, jiffies + link_poll_interval);
emac_print_link_status(dev);
} else
netif_carrier_on(dev->ndev);
emac_configure(dev);
mal_poll_add(dev->mal, &dev->commac);
mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan);
mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(ndev->mtu));
mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
emac_tx_enable(dev);
emac_rx_enable(dev);
netif_start_queue(ndev);
local_bh_enable();
return 0;
oom:
emac_clean_rx_ring(dev);
free_irq(dev->def->irq, dev);
return -ENOMEM;
}
/* BHs disabled */
static int emac_link_differs(struct ocp_enet_private *dev)
{
u32 r = in_be32(&dev->emacp->mr1);
int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF;
int speed, pause, asym_pause;
if (r & EMAC_MR1_MF_1000)
speed = SPEED_1000;
else if (r & EMAC_MR1_MF_100)
speed = SPEED_100;
else
speed = SPEED_10;
switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) {
case (EMAC_MR1_EIFC | EMAC_MR1_APP):
pause = 1;
asym_pause = 0;
break;
case EMAC_MR1_APP:
pause = 0;
asym_pause = 1;
break;
default:
pause = asym_pause = 0;
}
return speed != dev->phy.speed || duplex != dev->phy.duplex ||
pause != dev->phy.pause || asym_pause != dev->phy.asym_pause;
}
/* BHs disabled */
static void emac_link_timer(unsigned long data)
{
struct ocp_enet_private *dev = (struct ocp_enet_private *)data;
int link_poll_interval;
DBG2("%d: link timer" NL, dev->def->index);
if (dev->phy.def->ops->poll_link(&dev->phy)) {
if (!netif_carrier_ok(dev->ndev)) {
EMAC_RX_CLK_DEFAULT(dev->def->index);
/* Get new link parameters */
dev->phy.def->ops->read_link(&dev->phy);
if (dev->tah_dev || emac_link_differs(dev))
emac_full_tx_reset(dev->ndev);
netif_carrier_on(dev->ndev);
emac_print_link_status(dev);
}
link_poll_interval = PHY_POLL_LINK_ON;
} else {
if (netif_carrier_ok(dev->ndev)) {
EMAC_RX_CLK_TX(dev->def->index);
#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX)
emac_reinitialize(dev);
#endif
netif_carrier_off(dev->ndev);
emac_print_link_status(dev);
}
/* Retry reset if the previous attempt failed.
* This is needed mostly for CONFIG_IBM_EMAC_PHY_RX_CLK_FIX
* case, but I left it here because it shouldn't trigger for
* sane PHYs anyway.
*/
if (unlikely(dev->reset_failed))
emac_reinitialize(dev);
link_poll_interval = PHY_POLL_LINK_OFF;
}
mod_timer(&dev->link_timer, jiffies + link_poll_interval);
}
/* BHs disabled */
static void emac_force_link_update(struct ocp_enet_private *dev)
{
netif_carrier_off(dev->ndev);
if (timer_pending(&dev->link_timer))
mod_timer(&dev->link_timer, jiffies + PHY_POLL_LINK_OFF);
}
/* Process ctx, rtnl_lock semaphore */
static int emac_close(struct net_device *ndev)
{
struct ocp_enet_private *dev = ndev->priv;
struct ocp_func_emac_data *emacdata = dev->def->additions;
DBG("%d: close" NL, dev->def->index);
local_bh_disable();
if (dev->phy.address >= 0)
del_timer_sync(&dev->link_timer);
netif_stop_queue(ndev);
emac_rx_disable(dev);
emac_tx_disable(dev);
mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan);
mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan);
mal_poll_del(dev->mal, &dev->commac);
local_bh_enable();
emac_clean_tx_ring(dev);
emac_clean_rx_ring(dev);
free_irq(dev->def->irq, dev);
return 0;
}
static inline u16 emac_tx_csum(struct ocp_enet_private *dev,
struct sk_buff *skb)
{
#if defined(CONFIG_IBM_EMAC_TAH)
if (skb->ip_summed == CHECKSUM_PARTIAL) {
++dev->stats.tx_packets_csum;
return EMAC_TX_CTRL_TAH_CSUM;
}
#endif
return 0;
}
static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len)
{
struct emac_regs __iomem *p = dev->emacp;
struct net_device *ndev = dev->ndev;
/* Send the packet out */
out_be32(&p->tmr0, EMAC_TMR0_XMIT);
if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) {
netif_stop_queue(ndev);
DBG2("%d: stopped TX queue" NL, dev->def->index);
}
ndev->trans_start = jiffies;
++dev->stats.tx_packets;
dev->stats.tx_bytes += len;
return 0;
}
/* BHs disabled */
static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
struct ocp_enet_private *dev = ndev->priv;
unsigned int len = skb->len;
int slot;
u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb);
slot = dev->tx_slot++;
if (dev->tx_slot == NUM_TX_BUFF) {
dev->tx_slot = 0;
ctrl |= MAL_TX_CTRL_WRAP;
}
DBG2("%d: xmit(%u) %d" NL, dev->def->index, len, slot);
dev->tx_skb[slot] = skb;
dev->tx_desc[slot].data_ptr = dma_map_single(dev->ldev, skb->data, len,
DMA_TO_DEVICE);
dev->tx_desc[slot].data_len = (u16) len;
barrier();
dev->tx_desc[slot].ctrl = ctrl;
return emac_xmit_finish(dev, len);
}
#if defined(CONFIG_IBM_EMAC_TAH)
static inline int emac_xmit_split(struct ocp_enet_private *dev, int slot,
u32 pd, int len, int last, u16 base_ctrl)
{
while (1) {
u16 ctrl = base_ctrl;
int chunk = min(len, MAL_MAX_TX_SIZE);
len -= chunk;
slot = (slot + 1) % NUM_TX_BUFF;
if (last && !len)
ctrl |= MAL_TX_CTRL_LAST;
if (slot == NUM_TX_BUFF - 1)
ctrl |= MAL_TX_CTRL_WRAP;
dev->tx_skb[slot] = NULL;
dev->tx_desc[slot].data_ptr = pd;
dev->tx_desc[slot].data_len = (u16) chunk;
dev->tx_desc[slot].ctrl = ctrl;
++dev->tx_cnt;
if (!len)
break;
pd += chunk;
}
return slot;
}
/* BHs disabled (SG version for TAH equipped EMACs) */
static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
{
struct ocp_enet_private *dev = ndev->priv;
int nr_frags = skb_shinfo(skb)->nr_frags;
int len = skb->len, chunk;
int slot, i;
u16 ctrl;
u32 pd;
/* This is common "fast" path */
if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE))
return emac_start_xmit(skb, ndev);
len -= skb->data_len;
/* Note, this is only an *estimation*, we can still run out of empty
* slots because of the additional fragmentation into
* MAL_MAX_TX_SIZE-sized chunks
*/
if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF))
goto stop_queue;
ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY |
emac_tx_csum(dev, skb);
slot = dev->tx_slot;
/* skb data */
dev->tx_skb[slot] = NULL;
chunk = min(len, MAL_MAX_TX_SIZE);
dev->tx_desc[slot].data_ptr = pd =
dma_map_single(dev->ldev, skb->data, len, DMA_TO_DEVICE);
dev->tx_desc[slot].data_len = (u16) chunk;
len -= chunk;
if (unlikely(len))
slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags,
ctrl);
/* skb fragments */
for (i = 0; i < nr_frags; ++i) {
struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
len = frag->size;
if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF))
goto undo_frame;
pd = dma_map_page(dev->ldev, frag->page, frag->page_offset, len,
DMA_TO_DEVICE);
slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1,
ctrl);
}
DBG2("%d: xmit_sg(%u) %d - %d" NL, dev->def->index, skb->len,
dev->tx_slot, slot);
/* Attach skb to the last slot so we don't release it too early */
dev->tx_skb[slot] = skb;
/* Send the packet out */
if (dev->tx_slot == NUM_TX_BUFF - 1)
ctrl |= MAL_TX_CTRL_WRAP;
barrier();
dev->tx_desc[dev->tx_slot].ctrl = ctrl;
dev->tx_slot = (slot + 1) % NUM_TX_BUFF;
return emac_xmit_finish(dev, skb->len);
undo_frame:
/* Well, too bad. Our previous estimation was overly optimistic.
* Undo everything.
*/
while (slot != dev->tx_slot) {
dev->tx_desc[slot].ctrl = 0;
--dev->tx_cnt;
if (--slot < 0)
slot = NUM_TX_BUFF - 1;
}
++dev->estats.tx_undo;
stop_queue:
netif_stop_queue(ndev);
DBG2("%d: stopped TX queue" NL, dev->def->index);
return 1;
}
#else
# define emac_start_xmit_sg emac_start_xmit
#endif /* !defined(CONFIG_IBM_EMAC_TAH) */
/* BHs disabled */
static void emac_parse_tx_error(struct ocp_enet_private *dev, u16 ctrl)
{
struct ibm_emac_error_stats *st = &dev->estats;
DBG("%d: BD TX error %04x" NL, dev->def->index, ctrl);
++st->tx_bd_errors;
if (ctrl & EMAC_TX_ST_BFCS)
++st->tx_bd_bad_fcs;
if (ctrl & EMAC_TX_ST_LCS)
++st->tx_bd_carrier_loss;
if (ctrl & EMAC_TX_ST_ED)
++st->tx_bd_excessive_deferral;
if (ctrl & EMAC_TX_ST_EC)
++st->tx_bd_excessive_collisions;
if (ctrl & EMAC_TX_ST_LC)
++st->tx_bd_late_collision;
if (ctrl & EMAC_TX_ST_MC)
++st->tx_bd_multple_collisions;
if (ctrl & EMAC_TX_ST_SC)
++st->tx_bd_single_collision;
if (ctrl & EMAC_TX_ST_UR)
++st->tx_bd_underrun;
if (ctrl & EMAC_TX_ST_SQE)
++st->tx_bd_sqe;
}
static void emac_poll_tx(void *param)
{
struct ocp_enet_private *dev = param;
DBG2("%d: poll_tx, %d %d" NL, dev->def->index, dev->tx_cnt,
dev->ack_slot);
if (dev->tx_cnt) {
u16 ctrl;
int slot = dev->ack_slot, n = 0;
again:
ctrl = dev->tx_desc[slot].ctrl;
if (!(ctrl & MAL_TX_CTRL_READY)) {
struct sk_buff *skb = dev->tx_skb[slot];
++n;
if (skb) {
dev_kfree_skb(skb);
dev->tx_skb[slot] = NULL;
}
slot = (slot + 1) % NUM_TX_BUFF;
if (unlikely(EMAC_IS_BAD_TX(ctrl)))
emac_parse_tx_error(dev, ctrl);
if (--dev->tx_cnt)
goto again;
}
if (n) {
dev->ack_slot = slot;
if (netif_queue_stopped(dev->ndev) &&
dev->tx_cnt < EMAC_TX_WAKEUP_THRESH)
netif_wake_queue(dev->ndev);
DBG2("%d: tx %d pkts" NL, dev->def->index, n);
}
}
}
static inline void emac_recycle_rx_skb(struct ocp_enet_private *dev, int slot,
int len)
{
struct sk_buff *skb = dev->rx_skb[slot];
DBG2("%d: recycle %d %d" NL, dev->def->index, slot, len);
if (len)
dma_map_single(dev->ldev, skb->data - 2,
EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE);
dev->rx_desc[slot].data_len = 0;
barrier();
dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
(slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
}
static void emac_parse_rx_error(struct ocp_enet_private *dev, u16 ctrl)
{
struct ibm_emac_error_stats *st = &dev->estats;
DBG("%d: BD RX error %04x" NL, dev->def->index, ctrl);
++st->rx_bd_errors;
if (ctrl & EMAC_RX_ST_OE)
++st->rx_bd_overrun;
if (ctrl & EMAC_RX_ST_BP)
++st->rx_bd_bad_packet;
if (ctrl & EMAC_RX_ST_RP)
++st->rx_bd_runt_packet;
if (ctrl & EMAC_RX_ST_SE)
++st->rx_bd_short_event;
if (ctrl & EMAC_RX_ST_AE)
++st->rx_bd_alignment_error;
if (ctrl & EMAC_RX_ST_BFCS)
++st->rx_bd_bad_fcs;
if (ctrl & EMAC_RX_ST_PTL)
++st->rx_bd_packet_too_long;
if (ctrl & EMAC_RX_ST_ORE)
++st->rx_bd_out_of_range;
if (ctrl & EMAC_RX_ST_IRE)
++st->rx_bd_in_range;
}
static inline void emac_rx_csum(struct ocp_enet_private *dev,
struct sk_buff *skb, u16 ctrl)
{
#if defined(CONFIG_IBM_EMAC_TAH)
if (!ctrl && dev->tah_dev) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
++dev->stats.rx_packets_csum;
}
#endif
}
static inline int emac_rx_sg_append(struct ocp_enet_private *dev, int slot)
{
if (likely(dev->rx_sg_skb != NULL)) {
int len = dev->rx_desc[slot].data_len;
int tot_len = dev->rx_sg_skb->len + len;
if (unlikely(tot_len + 2 > dev->rx_skb_size)) {
++dev->estats.rx_dropped_mtu;
dev_kfree_skb(dev->rx_sg_skb);
dev->rx_sg_skb = NULL;
} else {
cacheable_memcpy(skb_tail_pointer(dev->rx_sg_skb),
dev->rx_skb[slot]->data, len);
skb_put(dev->rx_sg_skb, len);
emac_recycle_rx_skb(dev, slot, len);
return 0;
}
}
emac_recycle_rx_skb(dev, slot, 0);
return -1;
}
/* BHs disabled */
static int emac_poll_rx(void *param, int budget)
{
struct ocp_enet_private *dev = param;
int slot = dev->rx_slot, received = 0;
DBG2("%d: poll_rx(%d)" NL, dev->def->index, budget);
again:
while (budget > 0) {
int len;
struct sk_buff *skb;
u16 ctrl = dev->rx_desc[slot].ctrl;
if (ctrl & MAL_RX_CTRL_EMPTY)
break;
skb = dev->rx_skb[slot];
barrier();
len = dev->rx_desc[slot].data_len;
if (unlikely(!MAL_IS_SINGLE_RX(ctrl)))
goto sg;
ctrl &= EMAC_BAD_RX_MASK;
if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
emac_parse_rx_error(dev, ctrl);
++dev->estats.rx_dropped_error;
emac_recycle_rx_skb(dev, slot, 0);
len = 0;
goto next;
}
if (len && len < EMAC_RX_COPY_THRESH) {
struct sk_buff *copy_skb =
alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC);
if (unlikely(!copy_skb))
goto oom;
skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2);
cacheable_memcpy(copy_skb->data - 2, skb->data - 2,
len + 2);
emac_recycle_rx_skb(dev, slot, len);
skb = copy_skb;
} else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC)))
goto oom;
skb_put(skb, len);
push_packet:
skb->protocol = eth_type_trans(skb, dev->ndev);
emac_rx_csum(dev, skb, ctrl);
if (unlikely(netif_receive_skb(skb) == NET_RX_DROP))
++dev->estats.rx_dropped_stack;
next:
++dev->stats.rx_packets;
skip:
dev->stats.rx_bytes += len;
slot = (slot + 1) % NUM_RX_BUFF;
--budget;
++received;
continue;
sg:
if (ctrl & MAL_RX_CTRL_FIRST) {
BUG_ON(dev->rx_sg_skb);
if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) {
DBG("%d: rx OOM %d" NL, dev->def->index, slot);
++dev->estats.rx_dropped_oom;
emac_recycle_rx_skb(dev, slot, 0);
} else {
dev->rx_sg_skb = skb;
skb_put(skb, len);
}
} else if (!emac_rx_sg_append(dev, slot) &&
(ctrl & MAL_RX_CTRL_LAST)) {
skb = dev->rx_sg_skb;
dev->rx_sg_skb = NULL;
ctrl &= EMAC_BAD_RX_MASK;
if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) {
emac_parse_rx_error(dev, ctrl);
++dev->estats.rx_dropped_error;
dev_kfree_skb(skb);
len = 0;
} else
goto push_packet;
}
goto skip;
oom:
DBG("%d: rx OOM %d" NL, dev->def->index, slot);
/* Drop the packet and recycle skb */
++dev->estats.rx_dropped_oom;
emac_recycle_rx_skb(dev, slot, 0);
goto next;
}
if (received) {
DBG2("%d: rx %d BDs" NL, dev->def->index, received);
dev->rx_slot = slot;
}
if (unlikely(budget && dev->commac.rx_stopped)) {
struct ocp_func_emac_data *emacdata = dev->def->additions;
barrier();
if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) {
DBG2("%d: rx restart" NL, dev->def->index);
received = 0;
goto again;
}
if (dev->rx_sg_skb) {
DBG2("%d: dropping partial rx packet" NL,
dev->def->index);
++dev->estats.rx_dropped_error;
dev_kfree_skb(dev->rx_sg_skb);
dev->rx_sg_skb = NULL;
}
dev->commac.rx_stopped = 0;
mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan);
emac_rx_enable(dev);
dev->rx_slot = 0;
}
return received;
}
/* BHs disabled */
static int emac_peek_rx(void *param)
{
struct ocp_enet_private *dev = param;
return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY);
}
/* BHs disabled */
static int emac_peek_rx_sg(void *param)
{
struct ocp_enet_private *dev = param;
int slot = dev->rx_slot;
while (1) {
u16 ctrl = dev->rx_desc[slot].ctrl;
if (ctrl & MAL_RX_CTRL_EMPTY)
return 0;
else if (ctrl & MAL_RX_CTRL_LAST)
return 1;
slot = (slot + 1) % NUM_RX_BUFF;
/* I'm just being paranoid here :) */
if (unlikely(slot == dev->rx_slot))
return 0;
}
}
/* Hard IRQ */
static void emac_rxde(void *param)
{
struct ocp_enet_private *dev = param;
++dev->estats.rx_stopped;
emac_rx_disable_async(dev);
}
/* Hard IRQ */
static irqreturn_t emac_irq(int irq, void *dev_instance)
{
struct ocp_enet_private *dev = dev_instance;
struct emac_regs __iomem *p = dev->emacp;
struct ibm_emac_error_stats *st = &dev->estats;
u32 isr = in_be32(&p->isr);
out_be32(&p->isr, isr);
DBG("%d: isr = %08x" NL, dev->def->index, isr);
if (isr & EMAC_ISR_TXPE)
++st->tx_parity;
if (isr & EMAC_ISR_RXPE)
++st->rx_parity;
if (isr & EMAC_ISR_TXUE)
++st->tx_underrun;
if (isr & EMAC_ISR_RXOE)
++st->rx_fifo_overrun;
if (isr & EMAC_ISR_OVR)
++st->rx_overrun;
if (isr & EMAC_ISR_BP)
++st->rx_bad_packet;
if (isr & EMAC_ISR_RP)
++st->rx_runt_packet;
if (isr & EMAC_ISR_SE)
++st->rx_short_event;
if (isr & EMAC_ISR_ALE)
++st->rx_alignment_error;
if (isr & EMAC_ISR_BFCS)
++st->rx_bad_fcs;
if (isr & EMAC_ISR_PTLE)
++st->rx_packet_too_long;
if (isr & EMAC_ISR_ORE)
++st->rx_out_of_range;
if (isr & EMAC_ISR_IRE)
++st->rx_in_range;
if (isr & EMAC_ISR_SQE)
++st->tx_sqe;
if (isr & EMAC_ISR_TE)
++st->tx_errors;
return IRQ_HANDLED;
}
static struct net_device_stats *emac_stats(struct net_device *ndev)
{
struct ocp_enet_private *dev = ndev->priv;
struct ibm_emac_stats *st = &dev->stats;
struct ibm_emac_error_stats *est = &dev->estats;
struct net_device_stats *nst = &dev->nstats;
DBG2("%d: stats" NL, dev->def->index);
/* Compute "legacy" statistics */
local_irq_disable();
nst->rx_packets = (unsigned long)st->rx_packets;
nst->rx_bytes = (unsigned long)st->rx_bytes;
nst->tx_packets = (unsigned long)st->tx_packets;
nst->tx_bytes = (unsigned long)st->tx_bytes;
nst->rx_dropped = (unsigned long)(est->rx_dropped_oom +
est->rx_dropped_error +
est->rx_dropped_resize +
est->rx_dropped_mtu);
nst->tx_dropped = (unsigned long)est->tx_dropped;
nst->rx_errors = (unsigned long)est->rx_bd_errors;
nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun +
est->rx_fifo_overrun +
est->rx_overrun);
nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error +
est->rx_alignment_error);
nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs +
est->rx_bad_fcs);
nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet +
est->rx_bd_short_event +
est->rx_bd_packet_too_long +
est->rx_bd_out_of_range +
est->rx_bd_in_range +
est->rx_runt_packet +
est->rx_short_event +
est->rx_packet_too_long +
est->rx_out_of_range +
est->rx_in_range);
nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors);
nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun +
est->tx_underrun);
nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss;
nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral +
est->tx_bd_excessive_collisions +
est->tx_bd_late_collision +
est->tx_bd_multple_collisions);
local_irq_enable();
return nst;
}
static void emac_remove(struct ocp_device *ocpdev)
{
struct ocp_enet_private *dev = ocp_get_drvdata(ocpdev);
DBG("%d: remove" NL, dev->def->index);
ocp_set_drvdata(ocpdev, NULL);
unregister_netdev(dev->ndev);
tah_fini(dev->tah_dev);
rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
zmii_fini(dev->zmii_dev, dev->zmii_input);
emac_dbg_register(dev->def->index, NULL);
mal_unregister_commac(dev->mal, &dev->commac);
iounmap(dev->emacp);
kfree(dev->ndev);
}
static struct mal_commac_ops emac_commac_ops = {
.poll_tx = &emac_poll_tx,
.poll_rx = &emac_poll_rx,
.peek_rx = &emac_peek_rx,
.rxde = &emac_rxde,
};
static struct mal_commac_ops emac_commac_sg_ops = {
.poll_tx = &emac_poll_tx,
.poll_rx = &emac_poll_rx,
.peek_rx = &emac_peek_rx_sg,
.rxde = &emac_rxde,
};
/* Ethtool support */
static int emac_ethtool_get_settings(struct net_device *ndev,
struct ethtool_cmd *cmd)
{
struct ocp_enet_private *dev = ndev->priv;
cmd->supported = dev->phy.features;
cmd->port = PORT_MII;
cmd->phy_address = dev->phy.address;
cmd->transceiver =
dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL;
local_bh_disable();
cmd->advertising = dev->phy.advertising;
cmd->autoneg = dev->phy.autoneg;
cmd->speed = dev->phy.speed;
cmd->duplex = dev->phy.duplex;
local_bh_enable();
return 0;
}
static int emac_ethtool_set_settings(struct net_device *ndev,
struct ethtool_cmd *cmd)
{
struct ocp_enet_private *dev = ndev->priv;
u32 f = dev->phy.features;
DBG("%d: set_settings(%d, %d, %d, 0x%08x)" NL, dev->def->index,
cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising);
/* Basic sanity checks */
if (dev->phy.address < 0)
return -EOPNOTSUPP;
if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
return -EINVAL;
if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
return -EINVAL;
if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL)
return -EINVAL;
if (cmd->autoneg == AUTONEG_DISABLE) {
switch (cmd->speed) {
case SPEED_10:
if (cmd->duplex == DUPLEX_HALF
&& !(f & SUPPORTED_10baseT_Half))
return -EINVAL;
if (cmd->duplex == DUPLEX_FULL
&& !(f & SUPPORTED_10baseT_Full))
return -EINVAL;
break;
case SPEED_100:
if (cmd->duplex == DUPLEX_HALF
&& !(f & SUPPORTED_100baseT_Half))
return -EINVAL;
if (cmd->duplex == DUPLEX_FULL
&& !(f & SUPPORTED_100baseT_Full))
return -EINVAL;
break;
case SPEED_1000:
if (cmd->duplex == DUPLEX_HALF
&& !(f & SUPPORTED_1000baseT_Half))
return -EINVAL;
if (cmd->duplex == DUPLEX_FULL
&& !(f & SUPPORTED_1000baseT_Full))
return -EINVAL;
break;
default:
return -EINVAL;
}
local_bh_disable();
dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed,
cmd->duplex);
} else {
if (!(f & SUPPORTED_Autoneg))
return -EINVAL;
local_bh_disable();
dev->phy.def->ops->setup_aneg(&dev->phy,
(cmd->advertising & f) |
(dev->phy.advertising &
(ADVERTISED_Pause |
ADVERTISED_Asym_Pause)));
}
emac_force_link_update(dev);
local_bh_enable();
return 0;
}
static void emac_ethtool_get_ringparam(struct net_device *ndev,
struct ethtool_ringparam *rp)
{
rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF;
rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF;
}
static void emac_ethtool_get_pauseparam(struct net_device *ndev,
struct ethtool_pauseparam *pp)
{
struct ocp_enet_private *dev = ndev->priv;
local_bh_disable();
if ((dev->phy.features & SUPPORTED_Autoneg) &&
(dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause)))
pp->autoneg = 1;
if (dev->phy.duplex == DUPLEX_FULL) {
if (dev->phy.pause)
pp->rx_pause = pp->tx_pause = 1;
else if (dev->phy.asym_pause)
pp->tx_pause = 1;
}
local_bh_enable();
}
static u32 emac_ethtool_get_rx_csum(struct net_device *ndev)
{
struct ocp_enet_private *dev = ndev->priv;
return dev->tah_dev != 0;
}
static int emac_get_regs_len(struct ocp_enet_private *dev)
{
return sizeof(struct emac_ethtool_regs_subhdr) + EMAC_ETHTOOL_REGS_SIZE;
}
static int emac_ethtool_get_regs_len(struct net_device *ndev)
{
struct ocp_enet_private *dev = ndev->priv;
return sizeof(struct emac_ethtool_regs_hdr) +
emac_get_regs_len(dev) + mal_get_regs_len(dev->mal) +
zmii_get_regs_len(dev->zmii_dev) +
rgmii_get_regs_len(dev->rgmii_dev) +
tah_get_regs_len(dev->tah_dev);
}
static void *emac_dump_regs(struct ocp_enet_private *dev, void *buf)
{
struct emac_ethtool_regs_subhdr *hdr = buf;
hdr->version = EMAC_ETHTOOL_REGS_VER;
hdr->index = dev->def->index;
memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE);
return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE);
}
static void emac_ethtool_get_regs(struct net_device *ndev,
struct ethtool_regs *regs, void *buf)
{
struct ocp_enet_private *dev = ndev->priv;
struct emac_ethtool_regs_hdr *hdr = buf;
hdr->components = 0;
buf = hdr + 1;
local_irq_disable();
buf = mal_dump_regs(dev->mal, buf);
buf = emac_dump_regs(dev, buf);
if (dev->zmii_dev) {
hdr->components |= EMAC_ETHTOOL_REGS_ZMII;
buf = zmii_dump_regs(dev->zmii_dev, buf);
}
if (dev->rgmii_dev) {
hdr->components |= EMAC_ETHTOOL_REGS_RGMII;
buf = rgmii_dump_regs(dev->rgmii_dev, buf);
}
if (dev->tah_dev) {
hdr->components |= EMAC_ETHTOOL_REGS_TAH;
buf = tah_dump_regs(dev->tah_dev, buf);
}
local_irq_enable();
}
static int emac_ethtool_nway_reset(struct net_device *ndev)
{
struct ocp_enet_private *dev = ndev->priv;
int res = 0;
DBG("%d: nway_reset" NL, dev->def->index);
if (dev->phy.address < 0)
return -EOPNOTSUPP;
local_bh_disable();
if (!dev->phy.autoneg) {
res = -EINVAL;
goto out;
}
dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising);
emac_force_link_update(dev);
out:
local_bh_enable();
return res;
}
static int emac_get_sset_count(struct net_device *ndev, int sset)
{
switch (sset) {
case ETH_SS_STATS:
return EMAC_ETHTOOL_STATS_COUNT;
default:
return -EOPNOTSUPP;
}
}
static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset,
u8 * buf)
{
if (stringset == ETH_SS_STATS)
memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys));
}
static void emac_ethtool_get_ethtool_stats(struct net_device *ndev,
struct ethtool_stats *estats,
u64 * tmp_stats)
{
struct ocp_enet_private *dev = ndev->priv;
local_irq_disable();
memcpy(tmp_stats, &dev->stats, sizeof(dev->stats));
tmp_stats += sizeof(dev->stats) / sizeof(u64);
memcpy(tmp_stats, &dev->estats, sizeof(dev->estats));
local_irq_enable();
}
static void emac_ethtool_get_drvinfo(struct net_device *ndev,
struct ethtool_drvinfo *info)
{
struct ocp_enet_private *dev = ndev->priv;
strcpy(info->driver, "ibm_emac");
strcpy(info->version, DRV_VERSION);
info->fw_version[0] = '\0';
sprintf(info->bus_info, "PPC 4xx EMAC %d", dev->def->index);
info->regdump_len = emac_ethtool_get_regs_len(ndev);
}
static const struct ethtool_ops emac_ethtool_ops = {
.get_settings = emac_ethtool_get_settings,
.set_settings = emac_ethtool_set_settings,
.get_drvinfo = emac_ethtool_get_drvinfo,
.get_regs_len = emac_ethtool_get_regs_len,
.get_regs = emac_ethtool_get_regs,
.nway_reset = emac_ethtool_nway_reset,
.get_ringparam = emac_ethtool_get_ringparam,
.get_pauseparam = emac_ethtool_get_pauseparam,
.get_rx_csum = emac_ethtool_get_rx_csum,
.get_strings = emac_ethtool_get_strings,
.get_sset_count = emac_get_sset_count,
.get_ethtool_stats = emac_ethtool_get_ethtool_stats,
.get_link = ethtool_op_get_link,
};
static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
{
struct ocp_enet_private *dev = ndev->priv;
uint16_t *data = (uint16_t *) & rq->ifr_ifru;
DBG("%d: ioctl %08x" NL, dev->def->index, cmd);
if (dev->phy.address < 0)
return -EOPNOTSUPP;
switch (cmd) {
case SIOCGMIIPHY:
case SIOCDEVPRIVATE:
data[0] = dev->phy.address;
/* Fall through */
case SIOCGMIIREG:
case SIOCDEVPRIVATE + 1:
data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]);
return 0;
case SIOCSMIIREG:
case SIOCDEVPRIVATE + 2:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
emac_mdio_write(ndev, dev->phy.address, data[1], data[2]);
return 0;
default:
return -EOPNOTSUPP;
}
}
static int __init emac_probe(struct ocp_device *ocpdev)
{
struct ocp_func_emac_data *emacdata = ocpdev->def->additions;
struct net_device *ndev;
struct ocp_device *maldev;
struct ocp_enet_private *dev;
int err, i;
DECLARE_MAC_BUF(mac);
DBG("%d: probe" NL, ocpdev->def->index);
if (!emacdata) {
printk(KERN_ERR "emac%d: Missing additional data!\n",
ocpdev->def->index);
return -ENODEV;
}
/* Allocate our net_device structure */
ndev = alloc_etherdev(sizeof(struct ocp_enet_private));
if (!ndev) {
printk(KERN_ERR "emac%d: could not allocate ethernet device!\n",
ocpdev->def->index);
return -ENOMEM;
}
dev = ndev->priv;
dev->ndev = ndev;
dev->ldev = &ocpdev->dev;
dev->def = ocpdev->def;
/* Find MAL device we are connected to */
maldev =
ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_MAL, emacdata->mal_idx);
if (!maldev) {
printk(KERN_ERR "emac%d: unknown mal%d device!\n",
dev->def->index, emacdata->mal_idx);
err = -ENODEV;
goto out;
}
dev->mal = ocp_get_drvdata(maldev);
if (!dev->mal) {
printk(KERN_ERR "emac%d: mal%d hasn't been initialized yet!\n",
dev->def->index, emacdata->mal_idx);
err = -ENODEV;
goto out;
}
/* Register with MAL */
dev->commac.ops = &emac_commac_ops;
dev->commac.dev = dev;
dev->commac.tx_chan_mask = MAL_CHAN_MASK(emacdata->mal_tx_chan);
dev->commac.rx_chan_mask = MAL_CHAN_MASK(emacdata->mal_rx_chan);
err = mal_register_commac(dev->mal, &dev->commac);
if (err) {
printk(KERN_ERR "emac%d: failed to register with mal%d!\n",
dev->def->index, emacdata->mal_idx);
goto out;
}
dev->rx_skb_size = emac_rx_skb_size(ndev->mtu);
dev->rx_sync_size = emac_rx_sync_size(ndev->mtu);
/* Get pointers to BD rings */
dev->tx_desc =
dev->mal->bd_virt + mal_tx_bd_offset(dev->mal,
emacdata->mal_tx_chan);
dev->rx_desc =
dev->mal->bd_virt + mal_rx_bd_offset(dev->mal,
emacdata->mal_rx_chan);
DBG("%d: tx_desc %p" NL, ocpdev->def->index, dev->tx_desc);
DBG("%d: rx_desc %p" NL, ocpdev->def->index, dev->rx_desc);
/* Clean rings */
memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor));
memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor));
/* If we depend on another EMAC for MDIO, check whether it was probed already */
if (emacdata->mdio_idx >= 0 && emacdata->mdio_idx != ocpdev->def->index) {
struct ocp_device *mdiodev =
ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC,
emacdata->mdio_idx);
if (!mdiodev) {
printk(KERN_ERR "emac%d: unknown emac%d device!\n",
dev->def->index, emacdata->mdio_idx);
err = -ENODEV;
goto out2;
}
dev->mdio_dev = ocp_get_drvdata(mdiodev);
if (!dev->mdio_dev) {
printk(KERN_ERR
"emac%d: emac%d hasn't been initialized yet!\n",
dev->def->index, emacdata->mdio_idx);
err = -ENODEV;
goto out2;
}
}
/* Attach to ZMII, if needed */
if ((err = zmii_attach(dev)) != 0)
goto out2;
/* Attach to RGMII, if needed */
if ((err = rgmii_attach(dev)) != 0)
goto out3;
/* Attach to TAH, if needed */
if ((err = tah_attach(dev)) != 0)
goto out4;
/* Map EMAC regs */
dev->emacp = ioremap(dev->def->paddr, sizeof(struct emac_regs));
if (!dev->emacp) {
printk(KERN_ERR "emac%d: could not ioremap device registers!\n",
dev->def->index);
err = -ENOMEM;
goto out5;
}
/* Fill in MAC address */
for (i = 0; i < 6; ++i)
ndev->dev_addr[i] = emacdata->mac_addr[i];
/* Set some link defaults before we can find out real parameters */
dev->phy.speed = SPEED_100;
dev->phy.duplex = DUPLEX_FULL;
dev->phy.autoneg = AUTONEG_DISABLE;
dev->phy.pause = dev->phy.asym_pause = 0;
dev->stop_timeout = STOP_TIMEOUT_100;
init_timer(&dev->link_timer);
dev->link_timer.function = emac_link_timer;
dev->link_timer.data = (unsigned long)dev;
/* Find PHY if any */
dev->phy.dev = ndev;
dev->phy.mode = emacdata->phy_mode;
if (emacdata->phy_map != 0xffffffff) {
u32 phy_map = emacdata->phy_map | busy_phy_map;
u32 adv;
DBG("%d: PHY maps %08x %08x" NL, dev->def->index,
emacdata->phy_map, busy_phy_map);
EMAC_RX_CLK_TX(dev->def->index);
dev->phy.mdio_read = emac_mdio_read;
dev->phy.mdio_write = emac_mdio_write;
/* Configure EMAC with defaults so we can at least use MDIO
* This is needed mostly for 440GX
*/
if (emac_phy_gpcs(dev->phy.mode)) {
/* XXX
* Make GPCS PHY address equal to EMAC index.
* We probably should take into account busy_phy_map
* and/or phy_map here.
*/
dev->phy.address = dev->def->index;
}
emac_configure(dev);
for (i = 0; i < 0x20; phy_map >>= 1, ++i)
if (!(phy_map & 1)) {
int r;
busy_phy_map |= 1 << i;
/* Quick check if there is a PHY at the address */
r = emac_mdio_read(dev->ndev, i, MII_BMCR);
if (r == 0xffff || r < 0)
continue;
if (!mii_phy_probe(&dev->phy, i))
break;
}
if (i == 0x20) {
printk(KERN_WARNING "emac%d: can't find PHY!\n",
dev->def->index);
goto out6;
}
/* Init PHY */
if (dev->phy.def->ops->init)
dev->phy.def->ops->init(&dev->phy);
/* Disable any PHY features not supported by the platform */
dev->phy.def->features &= ~emacdata->phy_feat_exc;
/* Setup initial link parameters */
if (dev->phy.features & SUPPORTED_Autoneg) {
adv = dev->phy.features;
#if !defined(CONFIG_40x)
adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
#endif
/* Restart autonegotiation */
dev->phy.def->ops->setup_aneg(&dev->phy, adv);
} else {
u32 f = dev->phy.def->features;
int speed = SPEED_10, fd = DUPLEX_HALF;
/* Select highest supported speed/duplex */
if (f & SUPPORTED_1000baseT_Full) {
speed = SPEED_1000;
fd = DUPLEX_FULL;
} else if (f & SUPPORTED_1000baseT_Half)
speed = SPEED_1000;
else if (f & SUPPORTED_100baseT_Full) {
speed = SPEED_100;
fd = DUPLEX_FULL;
} else if (f & SUPPORTED_100baseT_Half)
speed = SPEED_100;
else if (f & SUPPORTED_10baseT_Full)
fd = DUPLEX_FULL;
/* Force link parameters */
dev->phy.def->ops->setup_forced(&dev->phy, speed, fd);
}
} else {
emac_reset(dev);
/* PHY-less configuration.
* XXX I probably should move these settings to emacdata
*/
dev->phy.address = -1;
dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII;
dev->phy.pause = 1;
}
/* Fill in the driver function table */
ndev->open = &emac_open;
if (dev->tah_dev) {
ndev->hard_start_xmit = &emac_start_xmit_sg;
ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
} else
ndev->hard_start_xmit = &emac_start_xmit;
ndev->tx_timeout = &emac_full_tx_reset;
ndev->watchdog_timeo = 5 * HZ;
ndev->stop = &emac_close;
ndev->get_stats = &emac_stats;
ndev->set_multicast_list = &emac_set_multicast_list;
ndev->do_ioctl = &emac_ioctl;
if (emac_phy_supports_gige(emacdata->phy_mode)) {
ndev->change_mtu = &emac_change_mtu;
dev->commac.ops = &emac_commac_sg_ops;
}
SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
netif_carrier_off(ndev);
netif_stop_queue(ndev);
err = register_netdev(ndev);
if (err) {
printk(KERN_ERR "emac%d: failed to register net device (%d)!\n",
dev->def->index, err);
goto out6;
}
ocp_set_drvdata(ocpdev, dev);
printk("%s: emac%d, MAC %s\n",
ndev->name, dev->def->index, print_mac(mac, ndev->dev_addr));
if (dev->phy.address >= 0)
printk("%s: found %s PHY (0x%02x)\n", ndev->name,
dev->phy.def->name, dev->phy.address);
emac_dbg_register(dev->def->index, dev);
return 0;
out6:
iounmap(dev->emacp);
out5:
tah_fini(dev->tah_dev);
out4:
rgmii_fini(dev->rgmii_dev, dev->rgmii_input);
out3:
zmii_fini(dev->zmii_dev, dev->zmii_input);
out2:
mal_unregister_commac(dev->mal, &dev->commac);
out:
kfree(ndev);
return err;
}
static struct ocp_device_id emac_ids[] = {
{ .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_EMAC },
{ .vendor = OCP_VENDOR_INVALID}
};
static struct ocp_driver emac_driver = {
.name = "emac",
.id_table = emac_ids,
.probe = emac_probe,
.remove = emac_remove,
};
static int __init emac_init(void)
{
printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n");
DBG(": init" NL);
if (mal_init())
return -ENODEV;
EMAC_CLK_INTERNAL;
if (ocp_register_driver(&emac_driver)) {
EMAC_CLK_EXTERNAL;
ocp_unregister_driver(&emac_driver);
mal_exit();
return -ENODEV;
}
EMAC_CLK_EXTERNAL;
emac_init_debug();
return 0;
}
static void __exit emac_exit(void)
{
DBG(": exit" NL);
ocp_unregister_driver(&emac_driver);
mal_exit();
emac_fini_debug();
}
module_init(emac_init);
module_exit(emac_exit);
drivers/net/ibm_emac/ibm_emac_core.h deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_core.h
*
* Driver for PowerPC 4xx on-chip ethernet controller.
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* Based on original work by
* Armin Kuster <akuster@mvista.com>
* Johnnie Peters <jpeters@mvista.com>
* Copyright 2000, 2001 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __IBM_EMAC_CORE_H_
#define __IBM_EMAC_CORE_H_
#include <linux/netdevice.h>
#include <linux/dma-mapping.h>
#include <asm/ocp.h>
#include "ibm_emac.h"
#include "ibm_emac_phy.h"
#include "ibm_emac_zmii.h"
#include "ibm_emac_rgmii.h"
#include "ibm_emac_mal.h"
#include "ibm_emac_tah.h"
#define NUM_TX_BUFF CONFIG_IBM_EMAC_TXB
#define NUM_RX_BUFF CONFIG_IBM_EMAC_RXB
/* Simple sanity check */
#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
#error Invalid number of buffer descriptors (greater than 256)
#endif
// XXX
#define EMAC_MIN_MTU 46
#define EMAC_MAX_MTU 9000
/* Maximum L2 header length (VLAN tagged, no FCS) */
#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4)
/* RX BD size for the given MTU */
static inline int emac_rx_size(int mtu)
{
if (mtu > ETH_DATA_LEN)
return MAL_MAX_RX_SIZE;
else
return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
}
#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment())
#define EMAC_RX_SKB_HEADROOM \
EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
/* Size of RX skb for the given MTU */
static inline int emac_rx_skb_size(int mtu)
{
int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
}
/* RX DMA sync size */
static inline int emac_rx_sync_size(int mtu)
{
return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
}
/* Driver statistcs is split into two parts to make it more cache friendly:
* - normal statistics (packet count, etc)
* - error statistics
*
* When statistics is requested by ethtool, these parts are concatenated,
* normal one goes first.
*
* Please, keep these structures in sync with emac_stats_keys.
*/
/* Normal TX/RX Statistics */
struct ibm_emac_stats {
u64 rx_packets;
u64 rx_bytes;
u64 tx_packets;
u64 tx_bytes;
u64 rx_packets_csum;
u64 tx_packets_csum;
};
/* Error statistics */
struct ibm_emac_error_stats {
u64 tx_undo;
/* Software RX Errors */
u64 rx_dropped_stack;
u64 rx_dropped_oom;
u64 rx_dropped_error;
u64 rx_dropped_resize;
u64 rx_dropped_mtu;
u64 rx_stopped;
/* BD reported RX errors */
u64 rx_bd_errors;
u64 rx_bd_overrun;
u64 rx_bd_bad_packet;
u64 rx_bd_runt_packet;
u64 rx_bd_short_event;
u64 rx_bd_alignment_error;
u64 rx_bd_bad_fcs;
u64 rx_bd_packet_too_long;
u64 rx_bd_out_of_range;
u64 rx_bd_in_range;
/* EMAC IRQ reported RX errors */
u64 rx_parity;
u64 rx_fifo_overrun;
u64 rx_overrun;
u64 rx_bad_packet;
u64 rx_runt_packet;
u64 rx_short_event;
u64 rx_alignment_error;
u64 rx_bad_fcs;
u64 rx_packet_too_long;
u64 rx_out_of_range;
u64 rx_in_range;
/* Software TX Errors */
u64 tx_dropped;
/* BD reported TX errors */
u64 tx_bd_errors;
u64 tx_bd_bad_fcs;
u64 tx_bd_carrier_loss;
u64 tx_bd_excessive_deferral;
u64 tx_bd_excessive_collisions;
u64 tx_bd_late_collision;
u64 tx_bd_multple_collisions;
u64 tx_bd_single_collision;
u64 tx_bd_underrun;
u64 tx_bd_sqe;
/* EMAC IRQ reported TX errors */
u64 tx_parity;
u64 tx_underrun;
u64 tx_sqe;
u64 tx_errors;
};
#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct ibm_emac_stats) + \
sizeof(struct ibm_emac_error_stats)) \
/ sizeof(u64))
struct ocp_enet_private {
struct net_device *ndev; /* 0 */
struct emac_regs __iomem *emacp;
struct mal_descriptor *tx_desc;
int tx_cnt;
int tx_slot;
int ack_slot;
struct mal_descriptor *rx_desc;
int rx_slot;
struct sk_buff *rx_sg_skb; /* 1 */
int rx_skb_size;
int rx_sync_size;
struct ibm_emac_stats stats;
struct ocp_device *tah_dev;
struct ibm_ocp_mal *mal;
struct mal_commac commac;
struct sk_buff *tx_skb[NUM_TX_BUFF];
struct sk_buff *rx_skb[NUM_RX_BUFF];
struct ocp_device *zmii_dev;
int zmii_input;
struct ocp_enet_private *mdio_dev;
struct ocp_device *rgmii_dev;
int rgmii_input;
struct ocp_def *def;
struct mii_phy phy;
struct timer_list link_timer;
int reset_failed;
int stop_timeout; /* in us */
struct ibm_emac_error_stats estats;
struct net_device_stats nstats;
struct device* ldev;
};
/* Ethtool get_regs complex data.
* We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
* when available.
*
* Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
* MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
* Each register component is preceded with emac_ethtool_regs_subhdr.
* Order of the optional headers follows their relative bit posititions
* in emac_ethtool_regs_hdr.components
*/
#define EMAC_ETHTOOL_REGS_ZMII 0x00000001
#define EMAC_ETHTOOL_REGS_RGMII 0x00000002
#define EMAC_ETHTOOL_REGS_TAH 0x00000004
struct emac_ethtool_regs_hdr {
u32 components;
};
struct emac_ethtool_regs_subhdr {
u32 version;
u32 index;
};
#endif /* __IBM_EMAC_CORE_H_ */
drivers/net/ibm_emac/ibm_emac_debug.c deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_debug.c
*
* Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
*
* Copyright (c) 2004, 2005 Zultys Technologies
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/sysrq.h>
#include <asm/io.h>
#include "ibm_emac_core.h"
static void emac_desc_dump(int idx, struct ocp_enet_private *p)
{
int i;
printk("** EMAC%d TX BDs **\n"
" tx_cnt = %d tx_slot = %d ack_slot = %d\n",
idx, p->tx_cnt, p->tx_slot, p->ack_slot);
for (i = 0; i < NUM_TX_BUFF / 2; ++i)
printk
("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
i, p->tx_desc[i].data_ptr, p->tx_skb[i] ? 'V' : ' ',
p->tx_desc[i].ctrl, p->tx_desc[i].data_len,
NUM_TX_BUFF / 2 + i,
p->tx_desc[NUM_TX_BUFF / 2 + i].data_ptr,
p->tx_skb[NUM_TX_BUFF / 2 + i] ? 'V' : ' ',
p->tx_desc[NUM_TX_BUFF / 2 + i].ctrl,
p->tx_desc[NUM_TX_BUFF / 2 + i].data_len);
printk("** EMAC%d RX BDs **\n"
" rx_slot = %d rx_stopped = %d rx_skb_size = %d rx_sync_size = %d\n"
" rx_sg_skb = 0x%p\n",
idx, p->rx_slot, p->commac.rx_stopped, p->rx_skb_size,
p->rx_sync_size, p->rx_sg_skb);
for (i = 0; i < NUM_RX_BUFF / 2; ++i)
printk
("bd[%2d] 0x%08x %c 0x%04x %4u - bd[%2d] 0x%08x %c 0x%04x %4u\n",
i, p->rx_desc[i].data_ptr, p->rx_skb[i] ? 'V' : ' ',
p->rx_desc[i].ctrl, p->rx_desc[i].data_len,
NUM_RX_BUFF / 2 + i,
p->rx_desc[NUM_RX_BUFF / 2 + i].data_ptr,
p->rx_skb[NUM_RX_BUFF / 2 + i] ? 'V' : ' ',
p->rx_desc[NUM_RX_BUFF / 2 + i].ctrl,
p->rx_desc[NUM_RX_BUFF / 2 + i].data_len);
}
static void emac_mac_dump(int idx, struct ocp_enet_private *dev)
{
struct emac_regs __iomem *p = dev->emacp;
printk("** EMAC%d registers **\n"
"MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n"
"RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n"
"IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n"
"IAHT: 0x%04x 0x%04x 0x%04x 0x%04x "
"GAHT: 0x%04x 0x%04x 0x%04x 0x%04x\n"
"LSA = %04x%08x IPGVR = 0x%04x\n"
"STACR = 0x%08x TRTR = 0x%08x RWMR = 0x%08x\n"
"OCTX = 0x%08x OCRX = 0x%08x IPCR = 0x%08x\n",
idx, in_be32(&p->mr0), in_be32(&p->mr1),
in_be32(&p->tmr0), in_be32(&p->tmr1),
in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser),
in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid),
in_be32(&p->vtci),
in_be32(&p->iaht1), in_be32(&p->iaht2), in_be32(&p->iaht3),
in_be32(&p->iaht4),
in_be32(&p->gaht1), in_be32(&p->gaht2), in_be32(&p->gaht3),
in_be32(&p->gaht4),
in_be32(&p->lsah), in_be32(&p->lsal), in_be32(&p->ipgvr),
in_be32(&p->stacr), in_be32(&p->trtr), in_be32(&p->rwmr),
in_be32(&p->octx), in_be32(&p->ocrx), in_be32(&p->ipcr)
);
emac_desc_dump(idx, dev);
}
static void emac_mal_dump(struct ibm_ocp_mal *mal)
{
struct ocp_func_mal_data *maldata = mal->def->additions;
int i;
printk("** MAL%d Registers **\n"
"CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n"
"TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n"
"RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n",
mal->def->index,
get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR),
get_mal_dcrn(mal, MAL_IER),
get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR),
get_mal_dcrn(mal, MAL_TXEOBISR), get_mal_dcrn(mal, MAL_TXDEIR),
get_mal_dcrn(mal, MAL_RXCASR), get_mal_dcrn(mal, MAL_RXCARR),
get_mal_dcrn(mal, MAL_RXEOBISR), get_mal_dcrn(mal, MAL_RXDEIR)
);
printk("TX|");
for (i = 0; i < maldata->num_tx_chans; ++i) {
if (i && !(i % 4))
printk("\n ");
printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_TXCTPR(i)));
}
printk("\nRX|");
for (i = 0; i < maldata->num_rx_chans; ++i) {
if (i && !(i % 4))
printk("\n ");
printk("CTP%d = 0x%08x ", i, get_mal_dcrn(mal, MAL_RXCTPR(i)));
}
printk("\n ");
for (i = 0; i < maldata->num_rx_chans; ++i) {
u32 r = get_mal_dcrn(mal, MAL_RCBS(i));
if (i && !(i % 3))
printk("\n ");
printk("RCBS%d = 0x%08x (%d) ", i, r, r * 16);
}
printk("\n");
}
static struct ocp_enet_private *__emacs[4];
static struct ibm_ocp_mal *__mals[1];
void emac_dbg_register(int idx, struct ocp_enet_private *dev)
{
unsigned long flags;
if (idx >= ARRAY_SIZE(__emacs)) {
printk(KERN_WARNING
"invalid index %d when registering EMAC for debugging\n",
idx);
return;
}
local_irq_save(flags);
__emacs[idx] = dev;
local_irq_restore(flags);
}
void mal_dbg_register(int idx, struct ibm_ocp_mal *mal)
{
unsigned long flags;
if (idx >= ARRAY_SIZE(__mals)) {
printk(KERN_WARNING
"invalid index %d when registering MAL for debugging\n",
idx);
return;
}
local_irq_save(flags);
__mals[idx] = mal;
local_irq_restore(flags);
}
void emac_dbg_dump_all(void)
{
unsigned int i;
unsigned long flags;
local_irq_save(flags);
for (i = 0; i < ARRAY_SIZE(__mals); ++i)
if (__mals[i])
emac_mal_dump(__mals[i]);
for (i = 0; i < ARRAY_SIZE(__emacs); ++i)
if (__emacs[i])
emac_mac_dump(i, __emacs[i]);
local_irq_restore(flags);
}
#if defined(CONFIG_MAGIC_SYSRQ)
static void emac_sysrq_handler(int key, struct tty_struct *tty)
{
emac_dbg_dump_all();
}
static struct sysrq_key_op emac_sysrq_op = {
.handler = emac_sysrq_handler,
.help_msg = "emaC",
.action_msg = "Show EMAC(s) status",
};
int __init emac_init_debug(void)
{
return register_sysrq_key('c', &emac_sysrq_op);
}
void __exit emac_fini_debug(void)
{
unregister_sysrq_key('c', &emac_sysrq_op);
}
#else
int __init emac_init_debug(void)
{
return 0;
}
void __exit emac_fini_debug(void)
{
}
#endif /* CONFIG_MAGIC_SYSRQ */
drivers/net/ibm_emac/ibm_emac_debug.h deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_debug.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
*
* Copyright (c) 2004, 2005 Zultys Technologies
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __IBM_EMAC_DEBUG_H_
#define __IBM_EMAC_DEBUG_H_
#include <linux/init.h>
#include "ibm_emac_core.h"
#include "ibm_emac_mal.h"
#if defined(CONFIG_IBM_EMAC_DEBUG)
void emac_dbg_register(int idx, struct ocp_enet_private *dev);
void mal_dbg_register(int idx, struct ibm_ocp_mal *mal);
int emac_init_debug(void) __init;
void emac_fini_debug(void) __exit;
void emac_dbg_dump_all(void);
# define DBG_LEVEL 1
#else
# define emac_dbg_register(x,y) ((void)0)
# define mal_dbg_register(x,y) ((void)0)
# define emac_init_debug() ((void)0)
# define emac_fini_debug() ((void)0)
# define emac_dbg_dump_all() ((void)0)
# define DBG_LEVEL 0
#endif
#if DBG_LEVEL > 0
# define DBG(f,x...) printk("emac" f, ##x)
# define MAL_DBG(f,x...) printk("mal" f, ##x)
# define ZMII_DBG(f,x...) printk("zmii" f, ##x)
# define RGMII_DBG(f,x...) printk("rgmii" f, ##x)
# define NL "\n"
#else
# define DBG(f,x...) ((void)0)
# define MAL_DBG(f,x...) ((void)0)
# define ZMII_DBG(f,x...) ((void)0)
# define RGMII_DBG(f,x...) ((void)0)
#endif
#if DBG_LEVEL > 1
# define DBG2(f,x...) DBG(f, ##x)
# define MAL_DBG2(f,x...) MAL_DBG(f, ##x)
# define ZMII_DBG2(f,x...) ZMII_DBG(f, ##x)
# define RGMII_DBG2(f,x...) RGMII_DBG(f, ##x)
#else
# define DBG2(f,x...) ((void)0)
# define MAL_DBG2(f,x...) ((void)0)
# define ZMII_DBG2(f,x...) ((void)0)
# define RGMII_DBG2(f,x...) ((void)0)
#endif
#endif /* __IBM_EMAC_DEBUG_H_ */
drivers/net/ibm_emac/ibm_emac_mal.c deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_mal.c
*
* Memory Access Layer (MAL) support
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* Based on original work by
* Benjamin Herrenschmidt <benh@kernel.crashing.org>,
* David Gibson <hermes@gibson.dropbear.id.au>,
*
* Armin Kuster <akuster@mvista.com>
* Copyright 2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <asm/ocp.h>
#include "ibm_emac_core.h"
#include "ibm_emac_mal.h"
#include "ibm_emac_debug.h"
int __init mal_register_commac(struct ibm_ocp_mal *mal,
struct mal_commac *commac)
{
unsigned long flags;
local_irq_save(flags);
MAL_DBG("%d: reg(%08x, %08x)" NL, mal->def->index,
commac->tx_chan_mask, commac->rx_chan_mask);
/* Don't let multiple commacs claim the same channel(s) */
if ((mal->tx_chan_mask & commac->tx_chan_mask) ||
(mal->rx_chan_mask & commac->rx_chan_mask)) {
local_irq_restore(flags);
printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n",
mal->def->index);
return -EBUSY;
}
mal->tx_chan_mask |= commac->tx_chan_mask;
mal->rx_chan_mask |= commac->rx_chan_mask;
list_add(&commac->list, &mal->list);
local_irq_restore(flags);
return 0;
}
void mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac)
{
unsigned long flags;
local_irq_save(flags);
MAL_DBG("%d: unreg(%08x, %08x)" NL, mal->def->index,
commac->tx_chan_mask, commac->rx_chan_mask);
mal->tx_chan_mask &= ~commac->tx_chan_mask;
mal->rx_chan_mask &= ~commac->rx_chan_mask;
list_del_init(&commac->list);
local_irq_restore(flags);
}
int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size)
{
struct ocp_func_mal_data *maldata = mal->def->additions;
BUG_ON(channel < 0 || channel >= maldata->num_rx_chans ||
size > MAL_MAX_RX_SIZE);
MAL_DBG("%d: set_rbcs(%d, %lu)" NL, mal->def->index, channel, size);
if (size & 0xf) {
printk(KERN_WARNING
"mal%d: incorrect RX size %lu for the channel %d\n",
mal->def->index, size, channel);
return -EINVAL;
}
set_mal_dcrn(mal, MAL_RCBS(channel), size >> 4);
return 0;
}
int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel)
{
struct ocp_func_mal_data *maldata = mal->def->additions;
BUG_ON(channel < 0 || channel >= maldata->num_tx_chans);
return channel * NUM_TX_BUFF;
}
int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel)
{
struct ocp_func_mal_data *maldata = mal->def->additions;
BUG_ON(channel < 0 || channel >= maldata->num_rx_chans);
return maldata->num_tx_chans * NUM_TX_BUFF + channel * NUM_RX_BUFF;
}
void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel)
{
local_bh_disable();
MAL_DBG("%d: enable_tx(%d)" NL, mal->def->index, channel);
set_mal_dcrn(mal, MAL_TXCASR,
get_mal_dcrn(mal, MAL_TXCASR) | MAL_CHAN_MASK(channel));
local_bh_enable();
}
void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel)
{
set_mal_dcrn(mal, MAL_TXCARR, MAL_CHAN_MASK(channel));
MAL_DBG("%d: disable_tx(%d)" NL, mal->def->index, channel);
}
void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel)
{
local_bh_disable();
MAL_DBG("%d: enable_rx(%d)" NL, mal->def->index, channel);
set_mal_dcrn(mal, MAL_RXCASR,
get_mal_dcrn(mal, MAL_RXCASR) | MAL_CHAN_MASK(channel));
local_bh_enable();
}
void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel)
{
set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel));
MAL_DBG("%d: disable_rx(%d)" NL, mal->def->index, channel);
}
void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac)
{
local_bh_disable();
MAL_DBG("%d: poll_add(%p)" NL, mal->def->index, commac);
list_add_tail(&commac->poll_list, &mal->poll_list);
local_bh_enable();
}
void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac)
{
local_bh_disable();
MAL_DBG("%d: poll_del(%p)" NL, mal->def->index, commac);
list_del(&commac->poll_list);
local_bh_enable();
}
/* synchronized by mal_poll() */
static inline void mal_enable_eob_irq(struct ibm_ocp_mal *mal)
{
MAL_DBG2("%d: enable_irq" NL, mal->def->index);
set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE);
}
/* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */
static inline void mal_disable_eob_irq(struct ibm_ocp_mal *mal)
{
set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) & ~MAL_CFG_EOPIE);
MAL_DBG2("%d: disable_irq" NL, mal->def->index);
}
static irqreturn_t mal_serr(int irq, void *dev_instance)
{
struct ibm_ocp_mal *mal = dev_instance;
u32 esr = get_mal_dcrn(mal, MAL_ESR);
/* Clear the error status register */
set_mal_dcrn(mal, MAL_ESR, esr);
MAL_DBG("%d: SERR %08x" NL, mal->def->index, esr);
if (esr & MAL_ESR_EVB) {
if (esr & MAL_ESR_DE) {
/* We ignore Descriptor error,
* TXDE or RXDE interrupt will be generated anyway.
*/
return IRQ_HANDLED;
}
if (esr & MAL_ESR_PEIN) {
/* PLB error, it's probably buggy hardware or
* incorrect physical address in BD (i.e. bug)
*/
if (net_ratelimit())
printk(KERN_ERR
"mal%d: system error, PLB (ESR = 0x%08x)\n",
mal->def->index, esr);
return IRQ_HANDLED;
}
/* OPB error, it's probably buggy hardware or incorrect EBC setup */
if (net_ratelimit())
printk(KERN_ERR
"mal%d: system error, OPB (ESR = 0x%08x)\n",
mal->def->index, esr);
}
return IRQ_HANDLED;
}
static inline void mal_schedule_poll(struct ibm_ocp_mal *mal)
{
if (likely(napi_schedule_prep(&mal->napi))) {
MAL_DBG2("%d: schedule_poll" NL, mal->def->index);
mal_disable_eob_irq(mal);
__napi_schedule(&mal->napi);
} else
MAL_DBG2("%d: already in poll" NL, mal->def->index);
}
static irqreturn_t mal_txeob(int irq, void *dev_instance)
{
struct ibm_ocp_mal *mal = dev_instance;
u32 r = get_mal_dcrn(mal, MAL_TXEOBISR);
MAL_DBG2("%d: txeob %08x" NL, mal->def->index, r);
mal_schedule_poll(mal);
set_mal_dcrn(mal, MAL_TXEOBISR, r);
return IRQ_HANDLED;
}
static irqreturn_t mal_rxeob(int irq, void *dev_instance)
{
struct ibm_ocp_mal *mal = dev_instance;
u32 r = get_mal_dcrn(mal, MAL_RXEOBISR);
MAL_DBG2("%d: rxeob %08x" NL, mal->def->index, r);
mal_schedule_poll(mal);
set_mal_dcrn(mal, MAL_RXEOBISR, r);
return IRQ_HANDLED;
}
static irqreturn_t mal_txde(int irq, void *dev_instance)
{
struct ibm_ocp_mal *mal = dev_instance;
u32 deir = get_mal_dcrn(mal, MAL_TXDEIR);
set_mal_dcrn(mal, MAL_TXDEIR, deir);
MAL_DBG("%d: txde %08x" NL, mal->def->index, deir);
if (net_ratelimit())
printk(KERN_ERR
"mal%d: TX descriptor error (TXDEIR = 0x%08x)\n",
mal->def->index, deir);
return IRQ_HANDLED;
}
static irqreturn_t mal_rxde(int irq, void *dev_instance)
{
struct ibm_ocp_mal *mal = dev_instance;
struct list_head *l;
u32 deir = get_mal_dcrn(mal, MAL_RXDEIR);
MAL_DBG("%d: rxde %08x" NL, mal->def->index, deir);
list_for_each(l, &mal->list) {
struct mal_commac *mc = list_entry(l, struct mal_commac, list);
if (deir & mc->rx_chan_mask) {
mc->rx_stopped = 1;
mc->ops->rxde(mc->dev);
}
}
mal_schedule_poll(mal);
set_mal_dcrn(mal, MAL_RXDEIR, deir);
return IRQ_HANDLED;
}
static int mal_poll(struct napi_struct *napi, int budget)
{
struct ibm_ocp_mal *mal = container_of(napi, struct ibm_ocp_mal, napi);
struct list_head *l;
int received = 0;
MAL_DBG2("%d: poll(%d) %d ->" NL, mal->def->index, *budget,
rx_work_limit);
again:
/* Process TX skbs */
list_for_each(l, &mal->poll_list) {
struct mal_commac *mc =
list_entry(l, struct mal_commac, poll_list);
mc->ops->poll_tx(mc->dev);
}
/* Process RX skbs.
* We _might_ need something more smart here to enforce polling fairness.
*/
list_for_each(l, &mal->poll_list) {
struct mal_commac *mc =
list_entry(l, struct mal_commac, poll_list);
int n = mc->ops->poll_rx(mc->dev, budget);
if (n) {
received += n;
budget -= n;
if (budget <= 0)
goto more_work; // XXX What if this is the last one ?
}
}
/* We need to disable IRQs to protect from RXDE IRQ here */
local_irq_disable();
__napi_complete(napi);
mal_enable_eob_irq(mal);
local_irq_enable();
/* Check for "rotting" packet(s) */
list_for_each(l, &mal->poll_list) {
struct mal_commac *mc =
list_entry(l, struct mal_commac, poll_list);
if (unlikely(mc->ops->peek_rx(mc->dev) || mc->rx_stopped)) {
MAL_DBG2("%d: rotting packet" NL, mal->def->index);
if (napi_reschedule(napi))
mal_disable_eob_irq(mal);
else
MAL_DBG2("%d: already in poll list" NL,
mal->def->index);
if (budget > 0)
goto again;
else
goto more_work;
}
mc->ops->poll_tx(mc->dev);
}
more_work:
MAL_DBG2("%d: poll() %d <- %d" NL, mal->def->index, budget, received);
return received;
}
static void mal_reset(struct ibm_ocp_mal *mal)
{
int n = 10;
MAL_DBG("%d: reset" NL, mal->def->index);
set_mal_dcrn(mal, MAL_CFG, MAL_CFG_SR);
/* Wait for reset to complete (1 system clock) */
while ((get_mal_dcrn(mal, MAL_CFG) & MAL_CFG_SR) && n)
--n;
if (unlikely(!n))
printk(KERN_ERR "mal%d: reset timeout\n", mal->def->index);
}
int mal_get_regs_len(struct ibm_ocp_mal *mal)
{
return sizeof(struct emac_ethtool_regs_subhdr) +
sizeof(struct ibm_mal_regs);
}
void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf)
{
struct emac_ethtool_regs_subhdr *hdr = buf;
struct ibm_mal_regs *regs = (struct ibm_mal_regs *)(hdr + 1);
struct ocp_func_mal_data *maldata = mal->def->additions;
int i;
hdr->version = MAL_VERSION;
hdr->index = mal->def->index;
regs->tx_count = maldata->num_tx_chans;
regs->rx_count = maldata->num_rx_chans;
regs->cfg = get_mal_dcrn(mal, MAL_CFG);
regs->esr = get_mal_dcrn(mal, MAL_ESR);
regs->ier = get_mal_dcrn(mal, MAL_IER);
regs->tx_casr = get_mal_dcrn(mal, MAL_TXCASR);
regs->tx_carr = get_mal_dcrn(mal, MAL_TXCARR);
regs->tx_eobisr = get_mal_dcrn(mal, MAL_TXEOBISR);
regs->tx_deir = get_mal_dcrn(mal, MAL_TXDEIR);
regs->rx_casr = get_mal_dcrn(mal, MAL_RXCASR);
regs->rx_carr = get_mal_dcrn(mal, MAL_RXCARR);
regs->rx_eobisr = get_mal_dcrn(mal, MAL_RXEOBISR);
regs->rx_deir = get_mal_dcrn(mal, MAL_RXDEIR);
for (i = 0; i < regs->tx_count; ++i)
regs->tx_ctpr[i] = get_mal_dcrn(mal, MAL_TXCTPR(i));
for (i = 0; i < regs->rx_count; ++i) {
regs->rx_ctpr[i] = get_mal_dcrn(mal, MAL_RXCTPR(i));
regs->rcbs[i] = get_mal_dcrn(mal, MAL_RCBS(i));
}
return regs + 1;
}
static int __init mal_probe(struct ocp_device *ocpdev)
{
struct ibm_ocp_mal *mal;
struct ocp_func_mal_data *maldata;
int err = 0, i, bd_size;
MAL_DBG("%d: probe" NL, ocpdev->def->index);
maldata = ocpdev->def->additions;
if (maldata == NULL) {
printk(KERN_ERR "mal%d: missing additional data!\n",
ocpdev->def->index);
return -ENODEV;
}
mal = kzalloc(sizeof(struct ibm_ocp_mal), GFP_KERNEL);
if (!mal) {
printk(KERN_ERR
"mal%d: out of memory allocating MAL structure!\n",
ocpdev->def->index);
return -ENOMEM;
}
/* XXX This only works for native dcr for now */
mal->dcrhost = dcr_map(NULL, maldata->dcr_base, 0);
mal->def = ocpdev->def;
INIT_LIST_HEAD(&mal->poll_list);
mal->napi.weight = CONFIG_IBM_EMAC_POLL_WEIGHT;
mal->napi.poll = mal_poll;
INIT_LIST_HEAD(&mal->list);
/* Load power-on reset defaults */
mal_reset(mal);
/* Set the MAL configuration register */
set_mal_dcrn(mal, MAL_CFG, MAL_CFG_DEFAULT | MAL_CFG_PLBB |
MAL_CFG_OPBBL | MAL_CFG_LEA);
mal_enable_eob_irq(mal);
/* Allocate space for BD rings */
BUG_ON(maldata->num_tx_chans <= 0 || maldata->num_tx_chans > 32);
BUG_ON(maldata->num_rx_chans <= 0 || maldata->num_rx_chans > 32);
bd_size = sizeof(struct mal_descriptor) *
(NUM_TX_BUFF * maldata->num_tx_chans +
NUM_RX_BUFF * maldata->num_rx_chans);
mal->bd_virt =
dma_alloc_coherent(&ocpdev->dev, bd_size, &mal->bd_dma, GFP_KERNEL);
if (!mal->bd_virt) {
printk(KERN_ERR
"mal%d: out of memory allocating RX/TX descriptors!\n",
mal->def->index);
err = -ENOMEM;
goto fail;
}
memset(mal->bd_virt, 0, bd_size);
for (i = 0; i < maldata->num_tx_chans; ++i)
set_mal_dcrn(mal, MAL_TXCTPR(i), mal->bd_dma +
sizeof(struct mal_descriptor) *
mal_tx_bd_offset(mal, i));
for (i = 0; i < maldata->num_rx_chans; ++i)
set_mal_dcrn(mal, MAL_RXCTPR(i), mal->bd_dma +
sizeof(struct mal_descriptor) *
mal_rx_bd_offset(mal, i));
err = request_irq(maldata->serr_irq, mal_serr, 0, "MAL SERR", mal);
if (err)
goto fail2;
err = request_irq(maldata->txde_irq, mal_txde, 0, "MAL TX DE", mal);
if (err)
goto fail3;
err = request_irq(maldata->txeob_irq, mal_txeob, 0, "MAL TX EOB", mal);
if (err)
goto fail4;
err = request_irq(maldata->rxde_irq, mal_rxde, 0, "MAL RX DE", mal);
if (err)
goto fail5;
err = request_irq(maldata->rxeob_irq, mal_rxeob, 0, "MAL RX EOB", mal);
if (err)
goto fail6;
/* Enable all MAL SERR interrupt sources */
set_mal_dcrn(mal, MAL_IER, MAL_IER_EVENTS);
/* Advertise this instance to the rest of the world */
ocp_set_drvdata(ocpdev, mal);
mal_dbg_register(mal->def->index, mal);
printk(KERN_INFO "mal%d: initialized, %d TX channels, %d RX channels\n",
mal->def->index, maldata->num_tx_chans, maldata->num_rx_chans);
return 0;
fail6:
free_irq(maldata->rxde_irq, mal);
fail5:
free_irq(maldata->txeob_irq, mal);
fail4:
free_irq(maldata->txde_irq, mal);
fail3:
free_irq(maldata->serr_irq, mal);
fail2:
dma_free_coherent(&ocpdev->dev, bd_size, mal->bd_virt, mal->bd_dma);
fail:
kfree(mal);
return err;
}
static void __exit mal_remove(struct ocp_device *ocpdev)
{
struct ibm_ocp_mal *mal = ocp_get_drvdata(ocpdev);
struct ocp_func_mal_data *maldata = mal->def->additions;
MAL_DBG("%d: remove" NL, mal->def->index);
/* Synchronize with scheduled polling */
napi_disable(&mal->napi);
if (!list_empty(&mal->list)) {
/* This is *very* bad */
printk(KERN_EMERG
"mal%d: commac list is not empty on remove!\n",
mal->def->index);
}
ocp_set_drvdata(ocpdev, NULL);
free_irq(maldata->serr_irq, mal);
free_irq(maldata->txde_irq, mal);
free_irq(maldata->txeob_irq, mal);
free_irq(maldata->rxde_irq, mal);
free_irq(maldata->rxeob_irq, mal);
mal_reset(mal);
mal_dbg_register(mal->def->index, NULL);
dma_free_coherent(&ocpdev->dev,
sizeof(struct mal_descriptor) *
(NUM_TX_BUFF * maldata->num_tx_chans +
NUM_RX_BUFF * maldata->num_rx_chans), mal->bd_virt,
mal->bd_dma);
kfree(mal);
}
/* Structure for a device driver */
static struct ocp_device_id mal_ids[] = {
{ .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_MAL },
{ .vendor = OCP_VENDOR_INVALID}
};
static struct ocp_driver mal_driver = {
.name = "mal",
.id_table = mal_ids,
.probe = mal_probe,
.remove = mal_remove,
};
int __init mal_init(void)
{
MAL_DBG(": init" NL);
return ocp_register_driver(&mal_driver);
}
void __exit mal_exit(void)
{
MAL_DBG(": exit" NL);
ocp_unregister_driver(&mal_driver);
}
drivers/net/ibm_emac/ibm_emac_mal.h deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_mal.h
*
* Memory Access Layer (MAL) support
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* Based on original work by
* Armin Kuster <akuster@mvista.com>
* Copyright 2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __IBM_EMAC_MAL_H_
#define __IBM_EMAC_MAL_H_
#include <linux/init.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include <asm/io.h>
#include <asm/dcr.h>
/*
* These MAL "versions" probably aren't the real versions IBM uses for these
* MAL cores, I assigned them just to make #ifdefs in this file nicer and
* reflect the fact that 40x and 44x have slightly different MALs. --ebs
*/
#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_NP405H)
#define MAL_VERSION 1
#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
defined(CONFIG_440SPE)
#define MAL_VERSION 2
#else
#error "Unknown SoC, please check chip manual and choose MAL 'version'"
#endif
/* MALx DCR registers */
#define MAL_CFG 0x00
#define MAL_CFG_SR 0x80000000
#define MAL_CFG_PLBB 0x00004000
#define MAL_CFG_OPBBL 0x00000080
#define MAL_CFG_EOPIE 0x00000004
#define MAL_CFG_LEA 0x00000002
#define MAL_CFG_SD 0x00000001
#if MAL_VERSION == 1
#define MAL_CFG_PLBP_MASK 0x00c00000
#define MAL_CFG_PLBP_10 0x00800000
#define MAL_CFG_GA 0x00200000
#define MAL_CFG_OA 0x00100000
#define MAL_CFG_PLBLE 0x00080000
#define MAL_CFG_PLBT_MASK 0x00078000
#define MAL_CFG_DEFAULT (MAL_CFG_PLBP_10 | MAL_CFG_PLBT_MASK)
#elif MAL_VERSION == 2
#define MAL_CFG_RPP_MASK 0x00c00000
#define MAL_CFG_RPP_10 0x00800000
#define MAL_CFG_RMBS_MASK 0x00300000
#define MAL_CFG_WPP_MASK 0x000c0000
#define MAL_CFG_WPP_10 0x00080000
#define MAL_CFG_WMBS_MASK 0x00030000
#define MAL_CFG_PLBLE 0x00008000
#define MAL_CFG_DEFAULT (MAL_CFG_RMBS_MASK | MAL_CFG_WMBS_MASK | \
MAL_CFG_RPP_10 | MAL_CFG_WPP_10)
#else
#error "Unknown MAL version"
#endif
#define MAL_ESR 0x01
#define MAL_ESR_EVB 0x80000000
#define MAL_ESR_CIDT 0x40000000
#define MAL_ESR_CID_MASK 0x3e000000
#define MAL_ESR_CID_SHIFT 25
#define MAL_ESR_DE 0x00100000
#define MAL_ESR_OTE 0x00040000
#define MAL_ESR_OSE 0x00020000
#define MAL_ESR_PEIN 0x00010000
#define MAL_ESR_DEI 0x00000010
#define MAL_ESR_OTEI 0x00000004
#define MAL_ESR_OSEI 0x00000002
#define MAL_ESR_PBEI 0x00000001
#if MAL_VERSION == 1
#define MAL_ESR_ONE 0x00080000
#define MAL_ESR_ONEI 0x00000008
#elif MAL_VERSION == 2
#define MAL_ESR_PTE 0x00800000
#define MAL_ESR_PRE 0x00400000
#define MAL_ESR_PWE 0x00200000
#define MAL_ESR_PTEI 0x00000080
#define MAL_ESR_PREI 0x00000040
#define MAL_ESR_PWEI 0x00000020
#else
#error "Unknown MAL version"
#endif
#define MAL_IER 0x02
#define MAL_IER_DE 0x00000010
#define MAL_IER_OTE 0x00000004
#define MAL_IER_OE 0x00000002
#define MAL_IER_PE 0x00000001
#if MAL_VERSION == 1
#define MAL_IER_NWE 0x00000008
#define MAL_IER_SOC_EVENTS MAL_IER_NWE
#elif MAL_VERSION == 2
#define MAL_IER_PT 0x00000080
#define MAL_IER_PRE 0x00000040
#define MAL_IER_PWE 0x00000020
#define MAL_IER_SOC_EVENTS (MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE)
#else
#error "Unknown MAL version"
#endif
#define MAL_IER_EVENTS (MAL_IER_SOC_EVENTS | MAL_IER_OTE | \
MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE)
#define MAL_TXCASR 0x04
#define MAL_TXCARR 0x05
#define MAL_TXEOBISR 0x06
#define MAL_TXDEIR 0x07
#define MAL_RXCASR 0x10
#define MAL_RXCARR 0x11
#define MAL_RXEOBISR 0x12
#define MAL_RXDEIR 0x13
#define MAL_TXCTPR(n) ((n) + 0x20)
#define MAL_RXCTPR(n) ((n) + 0x40)
#define MAL_RCBS(n) ((n) + 0x60)
/* In reality MAL can handle TX buffers up to 4095 bytes long,
* but this isn't a good round number :) --ebs
*/
#define MAL_MAX_TX_SIZE 4080
#define MAL_MAX_RX_SIZE 4080
static inline int mal_rx_size(int len)
{
len = (len + 0xf) & ~0xf;
return len > MAL_MAX_RX_SIZE ? MAL_MAX_RX_SIZE : len;
}
static inline int mal_tx_chunks(int len)
{
return (len + MAL_MAX_TX_SIZE - 1) / MAL_MAX_TX_SIZE;
}
#define MAL_CHAN_MASK(n) (0x80000000 >> (n))
/* MAL Buffer Descriptor structure */
struct mal_descriptor {
u16 ctrl; /* MAL / Commac status control bits */
u16 data_len; /* Max length is 4K-1 (12 bits) */
u32 data_ptr; /* pointer to actual data buffer */
};
/* the following defines are for the MadMAL status and control registers. */
/* MADMAL transmit and receive status/control bits */
#define MAL_RX_CTRL_EMPTY 0x8000
#define MAL_RX_CTRL_WRAP 0x4000
#define MAL_RX_CTRL_CM 0x2000
#define MAL_RX_CTRL_LAST 0x1000
#define MAL_RX_CTRL_FIRST 0x0800
#define MAL_RX_CTRL_INTR 0x0400
#define MAL_RX_CTRL_SINGLE (MAL_RX_CTRL_LAST | MAL_RX_CTRL_FIRST)
#define MAL_IS_SINGLE_RX(ctrl) (((ctrl) & MAL_RX_CTRL_SINGLE) == MAL_RX_CTRL_SINGLE)
#define MAL_TX_CTRL_READY 0x8000
#define MAL_TX_CTRL_WRAP 0x4000
#define MAL_TX_CTRL_CM 0x2000
#define MAL_TX_CTRL_LAST 0x1000
#define MAL_TX_CTRL_INTR 0x0400
struct mal_commac_ops {
void (*poll_tx) (void *dev);
int (*poll_rx) (void *dev, int budget);
int (*peek_rx) (void *dev);
void (*rxde) (void *dev);
};
struct mal_commac {
struct mal_commac_ops *ops;
void *dev;
struct list_head poll_list;
int rx_stopped;
u32 tx_chan_mask;
u32 rx_chan_mask;
struct list_head list;
};
struct ibm_ocp_mal {
dcr_host_t dcrhost;
struct list_head poll_list;
struct napi_struct napi;
struct list_head list;
u32 tx_chan_mask;
u32 rx_chan_mask;
dma_addr_t bd_dma;
struct mal_descriptor *bd_virt;
struct ocp_def *def;
};
static inline u32 get_mal_dcrn(struct ibm_ocp_mal *mal, int reg)
{
return dcr_read(mal->dcrhost, reg);
}
static inline void set_mal_dcrn(struct ibm_ocp_mal *mal, int reg, u32 val)
{
dcr_write(mal->dcrhost, reg, val);
}
/* Register MAL devices */
int mal_init(void) __init;
void mal_exit(void) __exit;
int mal_register_commac(struct ibm_ocp_mal *mal,
struct mal_commac *commac) __init;
void mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac);
int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size);
/* Returns BD ring offset for a particular channel
(in 'struct mal_descriptor' elements)
*/
int mal_tx_bd_offset(struct ibm_ocp_mal *mal, int channel);
int mal_rx_bd_offset(struct ibm_ocp_mal *mal, int channel);
void mal_enable_tx_channel(struct ibm_ocp_mal *mal, int channel);
void mal_disable_tx_channel(struct ibm_ocp_mal *mal, int channel);
void mal_enable_rx_channel(struct ibm_ocp_mal *mal, int channel);
void mal_disable_rx_channel(struct ibm_ocp_mal *mal, int channel);
/* Add/remove EMAC to/from MAL polling list */
void mal_poll_add(struct ibm_ocp_mal *mal, struct mal_commac *commac);
void mal_poll_del(struct ibm_ocp_mal *mal, struct mal_commac *commac);
/* Ethtool MAL registers */
struct ibm_mal_regs {
u32 tx_count;
u32 rx_count;
u32 cfg;
u32 esr;
u32 ier;
u32 tx_casr;
u32 tx_carr;
u32 tx_eobisr;
u32 tx_deir;
u32 rx_casr;
u32 rx_carr;
u32 rx_eobisr;
u32 rx_deir;
u32 tx_ctpr[32];
u32 rx_ctpr[32];
u32 rcbs[32];
};
int mal_get_regs_len(struct ibm_ocp_mal *mal);
void *mal_dump_regs(struct ibm_ocp_mal *mal, void *buf);
#endif /* __IBM_EMAC_MAL_H_ */
drivers/net/ibm_emac/ibm_emac_phy.c deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_phy.c
*
* Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
* Borrowed from sungem_phy.c, though I only kept the generic MII
* driver for now.
*
* This file should be shared with other drivers or eventually
* merged as the "low level" part of miilib
*
* (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
* (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/delay.h>
#include <asm/ocp.h>
#include "ibm_emac_core.h"
#include "ibm_emac_phy.h"
static inline int phy_read(struct mii_phy *phy, int reg)
{
return phy->mdio_read(phy->dev, phy->address, reg);
}
static inline void phy_write(struct mii_phy *phy, int reg, int val)
{
phy->mdio_write(phy->dev, phy->address, reg, val);
}
/*
* polls MII_BMCR until BMCR_RESET bit clears or operation times out.
*
* returns:
* >= 0 => success, value in BMCR returned to caller
* -EBUSY => failure, RESET bit never cleared
* otherwise => failure, lower level PHY read failed
*/
static int mii_spin_reset_complete(struct mii_phy *phy)
{
int val;
int limit = 10000;
while (limit--) {
val = phy_read(phy, MII_BMCR);
if (val >= 0 && !(val & BMCR_RESET))
return val; /* success */
udelay(10);
}
if (val & BMCR_RESET)
val = -EBUSY;
if (net_ratelimit())
printk(KERN_ERR "emac%d: PHY reset timeout (%d)\n",
((struct ocp_enet_private *)phy->dev->priv)->def->index,
val);
return val;
}
int mii_reset_phy(struct mii_phy *phy)
{
int val;
val = phy_read(phy, MII_BMCR);
val &= ~BMCR_ISOLATE;
val |= BMCR_RESET;
phy_write(phy, MII_BMCR, val);
udelay(300);
val = mii_spin_reset_complete(phy);
if (val >= 0 && (val & BMCR_ISOLATE))
phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
return val < 0;
}
static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
{
int ctl, adv;
phy->autoneg = AUTONEG_ENABLE;
phy->speed = SPEED_10;
phy->duplex = DUPLEX_HALF;
phy->pause = phy->asym_pause = 0;
phy->advertising = advertise;
/* Setup standard advertise */
adv = phy_read(phy, MII_ADVERTISE);
if (adv < 0)
return adv;
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
ADVERTISE_PAUSE_ASYM);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
if (advertise & ADVERTISED_10baseT_Full)
adv |= ADVERTISE_10FULL;
if (advertise & ADVERTISED_100baseT_Half)
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
if (advertise & ADVERTISED_Pause)
adv |= ADVERTISE_PAUSE_CAP;
if (advertise & ADVERTISED_Asym_Pause)
adv |= ADVERTISE_PAUSE_ASYM;
phy_write(phy, MII_ADVERTISE, adv);
if (phy->features &
(SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
adv = phy_read(phy, MII_CTRL1000);
if (adv < 0)
return adv;
adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
if (advertise & ADVERTISED_1000baseT_Full)
adv |= ADVERTISE_1000FULL;
if (advertise & ADVERTISED_1000baseT_Half)
adv |= ADVERTISE_1000HALF;
phy_write(phy, MII_CTRL1000, adv);
}
/* Start/Restart aneg */
/* on some PHYs (e.g. National DP83843) a write to MII_ADVERTISE
* causes BMCR_RESET to be set on the next read of MII_BMCR, which
* if not checked for causes the PHY to be reset below */
ctl = mii_spin_reset_complete(phy);
if (ctl < 0)
return ctl;
ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
phy_write(phy, MII_BMCR, ctl);
return 0;
}
static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
{
int ctl;
phy->autoneg = AUTONEG_DISABLE;
phy->speed = speed;
phy->duplex = fd;
phy->pause = phy->asym_pause = 0;
/* First reset the PHY */
mii_reset_phy(phy);
ctl = phy_read(phy, MII_BMCR);
if (ctl < 0)
return ctl;
ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE | BMCR_SPEED1000);
/* Select speed & duplex */
switch (speed) {
case SPEED_10:
break;
case SPEED_100:
ctl |= BMCR_SPEED100;
break;
case SPEED_1000:
ctl |= BMCR_SPEED1000;
break;
default:
return -EINVAL;
}
if (fd == DUPLEX_FULL)
ctl |= BMCR_FULLDPLX;
phy_write(phy, MII_BMCR, ctl);
return 0;
}
static int genmii_poll_link(struct mii_phy *phy)
{
int status;
/* Clear latched value with dummy read */
phy_read(phy, MII_BMSR);
status = phy_read(phy, MII_BMSR);
if (status < 0 || (status & BMSR_LSTATUS) == 0)
return 0;
if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE))
return 0;
return 1;
}
static int genmii_read_link(struct mii_phy *phy)
{
if (phy->autoneg == AUTONEG_ENABLE) {
int glpa = 0;
int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
if (lpa < 0)
return lpa;
if (phy->features &
(SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
int adv = phy_read(phy, MII_CTRL1000);
glpa = phy_read(phy, MII_STAT1000);
if (glpa < 0 || adv < 0)
return adv;
glpa &= adv << 2;
}
phy->speed = SPEED_10;
phy->duplex = DUPLEX_HALF;
phy->pause = phy->asym_pause = 0;
if (glpa & (LPA_1000FULL | LPA_1000HALF)) {
phy->speed = SPEED_1000;
if (glpa & LPA_1000FULL)
phy->duplex = DUPLEX_FULL;
} else if (lpa & (LPA_100FULL | LPA_100HALF)) {
phy->speed = SPEED_100;
if (lpa & LPA_100FULL)
phy->duplex = DUPLEX_FULL;
} else if (lpa & LPA_10FULL)
phy->duplex = DUPLEX_FULL;
if (phy->duplex == DUPLEX_FULL) {
phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
}
} else {
int bmcr = phy_read(phy, MII_BMCR);
if (bmcr < 0)
return bmcr;
if (bmcr & BMCR_FULLDPLX)
phy->duplex = DUPLEX_FULL;
else
phy->duplex = DUPLEX_HALF;
if (bmcr & BMCR_SPEED1000)
phy->speed = SPEED_1000;
else if (bmcr & BMCR_SPEED100)
phy->speed = SPEED_100;
else
phy->speed = SPEED_10;
phy->pause = phy->asym_pause = 0;
}
return 0;
}
/* Generic implementation for most 10/100/1000 PHYs */
static struct mii_phy_ops generic_phy_ops = {
.setup_aneg = genmii_setup_aneg,
.setup_forced = genmii_setup_forced,
.poll_link = genmii_poll_link,
.read_link = genmii_read_link
};
static struct mii_phy_def genmii_phy_def = {
.phy_id = 0x00000000,
.phy_id_mask = 0x00000000,
.name = "Generic MII",
.ops = &generic_phy_ops
};
/* CIS8201 */
#define MII_CIS8201_10BTCSR 0x16
#define TENBTCSR_ECHO_DISABLE 0x2000
#define MII_CIS8201_EPCR 0x17
#define EPCR_MODE_MASK 0x3000
#define EPCR_GMII_MODE 0x0000
#define EPCR_RGMII_MODE 0x1000
#define EPCR_TBI_MODE 0x2000
#define EPCR_RTBI_MODE 0x3000
#define MII_CIS8201_ACSR 0x1c
#define ACSR_PIN_PRIO_SELECT 0x0004
static int cis8201_init(struct mii_phy *phy)
{
int epcr;
epcr = phy_read(phy, MII_CIS8201_EPCR);
if (epcr < 0)
return epcr;
epcr &= ~EPCR_MODE_MASK;
switch (phy->mode) {
case PHY_MODE_TBI:
epcr |= EPCR_TBI_MODE;
break;
case PHY_MODE_RTBI:
epcr |= EPCR_RTBI_MODE;
break;
case PHY_MODE_GMII:
epcr |= EPCR_GMII_MODE;
break;
case PHY_MODE_RGMII:
default:
epcr |= EPCR_RGMII_MODE;
}
phy_write(phy, MII_CIS8201_EPCR, epcr);
/* MII regs override strap pins */
phy_write(phy, MII_CIS8201_ACSR,
phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT);
/* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */
phy_write(phy, MII_CIS8201_10BTCSR,
phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE);
return 0;
}
static struct mii_phy_ops cis8201_phy_ops = {
.init = cis8201_init,
.setup_aneg = genmii_setup_aneg,
.setup_forced = genmii_setup_forced,
.poll_link = genmii_poll_link,
.read_link = genmii_read_link
};
static struct mii_phy_def cis8201_phy_def = {
.phy_id = 0x000fc410,
.phy_id_mask = 0x000ffff0,
.name = "CIS8201 Gigabit Ethernet",
.ops = &cis8201_phy_ops
};
static struct mii_phy_def *mii_phy_table[] = {
&cis8201_phy_def,
&genmii_phy_def,
NULL
};
int mii_phy_probe(struct mii_phy *phy, int address)
{
struct mii_phy_def *def;
int i;
int id;
phy->autoneg = AUTONEG_DISABLE;
phy->advertising = 0;
phy->address = address;
phy->speed = SPEED_10;
phy->duplex = DUPLEX_HALF;
phy->pause = phy->asym_pause = 0;
/* Take PHY out of isolate mode and reset it. */
if (mii_reset_phy(phy))
return -ENODEV;
/* Read ID and find matching entry */
id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
if (id < 0)
return -ENODEV;
for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
if ((id & def->phy_id_mask) == def->phy_id)
break;
/* Should never be NULL (we have a generic entry), but... */
if (!def)
return -ENODEV;
phy->def = def;
/* Determine PHY features if needed */
phy->features = def->features;
if (!phy->features) {
u16 bmsr = phy_read(phy, MII_BMSR);
if (bmsr & BMSR_ANEGCAPABLE)
phy->features |= SUPPORTED_Autoneg;
if (bmsr & BMSR_10HALF)
phy->features |= SUPPORTED_10baseT_Half;
if (bmsr & BMSR_10FULL)
phy->features |= SUPPORTED_10baseT_Full;
if (bmsr & BMSR_100HALF)
phy->features |= SUPPORTED_100baseT_Half;
if (bmsr & BMSR_100FULL)
phy->features |= SUPPORTED_100baseT_Full;
if (bmsr & BMSR_ESTATEN) {
u16 esr = phy_read(phy, MII_ESTATUS);
if (esr & ESTATUS_1000_TFULL)
phy->features |= SUPPORTED_1000baseT_Full;
if (esr & ESTATUS_1000_THALF)
phy->features |= SUPPORTED_1000baseT_Half;
}
phy->features |= SUPPORTED_MII;
}
/* Setup default advertising */
phy->advertising = phy->features;
return 0;
}
MODULE_LICENSE("GPL");
drivers/net/ibm_emac/ibm_emac_phy.h deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_phy.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, PHY support
*
* Benjamin Herrenschmidt <benh@kernel.crashing.org>
* February 2003
*
* Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This file basically duplicates sungem_phy.{c,h} with different PHYs
* supported. I'm looking into merging that in a single mii layer more
* flexible than mii.c
*/
#ifndef _IBM_OCP_PHY_H_
#define _IBM_OCP_PHY_H_
struct mii_phy;
/* Operations supported by any kind of PHY */
struct mii_phy_ops {
int (*init) (struct mii_phy * phy);
int (*suspend) (struct mii_phy * phy, int wol_options);
int (*setup_aneg) (struct mii_phy * phy, u32 advertise);
int (*setup_forced) (struct mii_phy * phy, int speed, int fd);
int (*poll_link) (struct mii_phy * phy);
int (*read_link) (struct mii_phy * phy);
};
/* Structure used to statically define an mii/gii based PHY */
struct mii_phy_def {
u32 phy_id; /* Concatenated ID1 << 16 | ID2 */
u32 phy_id_mask; /* Significant bits */
u32 features; /* Ethtool SUPPORTED_* defines or
0 for autodetect */
int magic_aneg; /* Autoneg does all speed test for us */
const char *name;
const struct mii_phy_ops *ops;
};
/* An instance of a PHY, partially borrowed from mii_if_info */
struct mii_phy {
struct mii_phy_def *def;
u32 advertising; /* Ethtool ADVERTISED_* defines */
u32 features; /* Copied from mii_phy_def.features
or determined automaticaly */
int address; /* PHY address */
int mode; /* PHY mode */
/* 1: autoneg enabled, 0: disabled */
int autoneg;
/* forced speed & duplex (no autoneg)
* partner speed & duplex & pause (autoneg)
*/
int speed;
int duplex;
int pause;
int asym_pause;
/* Provided by host chip */
struct net_device *dev;
int (*mdio_read) (struct net_device * dev, int addr, int reg);
void (*mdio_write) (struct net_device * dev, int addr, int reg,
int val);
};
/* Pass in a struct mii_phy with dev, mdio_read and mdio_write
* filled, the remaining fields will be filled on return
*/
int mii_phy_probe(struct mii_phy *phy, int address);
int mii_reset_phy(struct mii_phy *phy);
#endif /* _IBM_OCP_PHY_H_ */
drivers/net/ibm_emac/ibm_emac_rgmii.c deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_rgmii.c
*
* Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* Based on original work by
* Matt Porter <mporter@kernel.crashing.org>
* Copyright 2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/ethtool.h>
#include <asm/io.h>
#include "ibm_emac_core.h"
#include "ibm_emac_debug.h"
/* RGMIIx_FER */
#define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4))
#define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4))
#define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4))
#define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4))
#define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4))
/* RGMIIx_SSR */
#define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8))
#define RGMII_SSR_100(idx) (0x2 << ((idx) * 8))
#define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8))
/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */
static inline int rgmii_valid_mode(int phy_mode)
{
return phy_mode == PHY_MODE_GMII ||
phy_mode == PHY_MODE_RGMII ||
phy_mode == PHY_MODE_TBI ||
phy_mode == PHY_MODE_RTBI;
}
static inline const char *rgmii_mode_name(int mode)
{
switch (mode) {
case PHY_MODE_RGMII:
return "RGMII";
case PHY_MODE_TBI:
return "TBI";
case PHY_MODE_GMII:
return "GMII";
case PHY_MODE_RTBI:
return "RTBI";
default:
BUG();
}
}
static inline u32 rgmii_mode_mask(int mode, int input)
{
switch (mode) {
case PHY_MODE_RGMII:
return RGMII_FER_RGMII(input);
case PHY_MODE_TBI:
return RGMII_FER_TBI(input);
case PHY_MODE_GMII:
return RGMII_FER_GMII(input);
case PHY_MODE_RTBI:
return RGMII_FER_RTBI(input);
default:
BUG();
}
}
static int __init rgmii_init(struct ocp_device *ocpdev, int input, int mode)
{
struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
struct rgmii_regs *p;
RGMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, mode);
if (!dev) {
dev = kzalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
if (!dev) {
printk(KERN_ERR
"rgmii%d: couldn't allocate device structure!\n",
ocpdev->def->index);
return -ENOMEM;
}
p = (struct rgmii_regs *)ioremap(ocpdev->def->paddr,
sizeof(struct rgmii_regs));
if (!p) {
printk(KERN_ERR
"rgmii%d: could not ioremap device registers!\n",
ocpdev->def->index);
kfree(dev);
return -ENOMEM;
}
dev->base = p;
ocp_set_drvdata(ocpdev, dev);
/* Disable all inputs by default */
out_be32(&p->fer, 0);
} else
p = dev->base;
/* Enable this input */
out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input));
printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
ocpdev->def->index, input, rgmii_mode_name(mode));
++dev->users;
return 0;
}
int __init rgmii_attach(void *emac)
{
struct ocp_enet_private *dev = emac;
struct ocp_func_emac_data *emacdata = dev->def->additions;
/* Check if we need to attach to a RGMII */
if (emacdata->rgmii_idx >= 0 && rgmii_valid_mode(emacdata->phy_mode)) {
dev->rgmii_input = emacdata->rgmii_mux;
dev->rgmii_dev =
ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_RGMII,
emacdata->rgmii_idx);
if (!dev->rgmii_dev) {
printk(KERN_ERR "emac%d: unknown rgmii%d!\n",
dev->def->index, emacdata->rgmii_idx);
return -ENODEV;
}
if (rgmii_init
(dev->rgmii_dev, dev->rgmii_input, emacdata->phy_mode)) {
printk(KERN_ERR
"emac%d: rgmii%d initialization failed!\n",
dev->def->index, emacdata->rgmii_idx);
return -ENODEV;
}
}
return 0;
}
void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
{
struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
u32 ssr = in_be32(&dev->base->ssr) & ~RGMII_SSR_MASK(input);
RGMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
if (speed == SPEED_1000)
ssr |= RGMII_SSR_1000(input);
else if (speed == SPEED_100)
ssr |= RGMII_SSR_100(input);
out_be32(&dev->base->ssr, ssr);
}
void __rgmii_fini(struct ocp_device *ocpdev, int input)
{
struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
BUG_ON(!dev || dev->users == 0);
RGMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
/* Disable this input */
out_be32(&dev->base->fer,
in_be32(&dev->base->fer) & ~RGMII_FER_MASK(input));
if (!--dev->users) {
/* Free everything if this is the last user */
ocp_set_drvdata(ocpdev, NULL);
iounmap((void *)dev->base);
kfree(dev);
}
}
int __rgmii_get_regs_len(struct ocp_device *ocpdev)
{
return sizeof(struct emac_ethtool_regs_subhdr) +
sizeof(struct rgmii_regs);
}
void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf)
{
struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
struct emac_ethtool_regs_subhdr *hdr = buf;
struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1);
hdr->version = 0;
hdr->index = ocpdev->def->index;
memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs));
return regs + 1;
}
drivers/net/ibm_emac/ibm_emac_rgmii.h deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_rgmii.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
*
* Based on ocp_zmii.h/ibm_emac_zmii.h
* Armin Kuster akuster@mvista.com
*
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _IBM_EMAC_RGMII_H_
#define _IBM_EMAC_RGMII_H_
/* RGMII bridge */
struct rgmii_regs {
u32 fer; /* Function enable register */
u32 ssr; /* Speed select register */
};
/* RGMII device */
struct ibm_ocp_rgmii {
struct rgmii_regs __iomem *base;
int users; /* number of EMACs using this RGMII bridge */
};
#ifdef CONFIG_IBM_EMAC_RGMII
int rgmii_attach(void *emac) __init;
void __rgmii_fini(struct ocp_device *ocpdev, int input);
static inline void rgmii_fini(struct ocp_device *ocpdev, int input)
{
if (ocpdev)
__rgmii_fini(ocpdev, input);
}
void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
int __rgmii_get_regs_len(struct ocp_device *ocpdev);
static inline int rgmii_get_regs_len(struct ocp_device *ocpdev)
{
return ocpdev ? __rgmii_get_regs_len(ocpdev) : 0;
}
void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf);
#else
# define rgmii_attach(x) 0
# define rgmii_fini(x,y) ((void)0)
# define rgmii_set_speed(x,y,z) ((void)0)
# define rgmii_get_regs_len(x) 0
# define rgmii_dump_regs(x,buf) (buf)
#endif /* !CONFIG_IBM_EMAC_RGMII */
#endif /* _IBM_EMAC_RGMII_H_ */
drivers/net/ibm_emac/ibm_emac_tah.c deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_tah.c
*
* Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
*
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
* Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <asm/io.h>
#include "ibm_emac_core.h"
static int __init tah_init(struct ocp_device *ocpdev)
{
struct tah_regs *p;
if (ocp_get_drvdata(ocpdev)) {
printk(KERN_ERR "tah%d: already in use!\n", ocpdev->def->index);
return -EBUSY;
}
/* Initialize TAH and enable IPv4 checksum verification, no TSO yet */
p = (struct tah_regs *)ioremap(ocpdev->def->paddr, sizeof(*p));
if (!p) {
printk(KERN_ERR "tah%d: could not ioremap device registers!\n",
ocpdev->def->index);
return -ENOMEM;
}
ocp_set_drvdata(ocpdev, p);
__tah_reset(ocpdev);
return 0;
}
int __init tah_attach(void *emac)
{
struct ocp_enet_private *dev = emac;
struct ocp_func_emac_data *emacdata = dev->def->additions;
/* Check if we need to attach to a TAH */
if (emacdata->tah_idx >= 0) {
dev->tah_dev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
emacdata->tah_idx);
if (!dev->tah_dev) {
printk(KERN_ERR "emac%d: unknown tah%d!\n",
dev->def->index, emacdata->tah_idx);
return -ENODEV;
}
if (tah_init(dev->tah_dev)) {
printk(KERN_ERR
"emac%d: tah%d initialization failed!\n",
dev->def->index, emacdata->tah_idx);
return -ENODEV;
}
}
return 0;
}
void __tah_fini(struct ocp_device *ocpdev)
{
struct tah_regs *p = ocp_get_drvdata(ocpdev);
BUG_ON(!p);
ocp_set_drvdata(ocpdev, NULL);
iounmap((void *)p);
}
void __tah_reset(struct ocp_device *ocpdev)
{
struct tah_regs *p = ocp_get_drvdata(ocpdev);
int n;
/* Reset TAH */
out_be32(&p->mr, TAH_MR_SR);
n = 100;
while ((in_be32(&p->mr) & TAH_MR_SR) && n)
--n;
if (unlikely(!n))
printk(KERN_ERR "tah%d: reset timeout\n", ocpdev->def->index);
/* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
out_be32(&p->mr,
TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
TAH_MR_DIG);
}
int __tah_get_regs_len(struct ocp_device *ocpdev)
{
return sizeof(struct emac_ethtool_regs_subhdr) +
sizeof(struct tah_regs);
}
void *tah_dump_regs(struct ocp_device *ocpdev, void *buf)
{
struct tah_regs *dev = ocp_get_drvdata(ocpdev);
struct emac_ethtool_regs_subhdr *hdr = buf;
struct tah_regs *regs = (struct tah_regs *)(hdr + 1);
hdr->version = 0;
hdr->index = ocpdev->def->index;
memcpy_fromio(regs, dev, sizeof(struct tah_regs));
return regs + 1;
}
drivers/net/ibm_emac/ibm_emac_tah.h deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_tah.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
*
* Copyright 2004 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
* Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _IBM_EMAC_TAH_H
#define _IBM_EMAC_TAH_H
#include <linux/init.h>
#include <asm/ocp.h>
/* TAH */
struct tah_regs {
u32 revid;
u32 pad[3];
u32 mr;
u32 ssr0;
u32 ssr1;
u32 ssr2;
u32 ssr3;
u32 ssr4;
u32 ssr5;
u32 tsr;
};
/* TAH engine */
#define TAH_MR_CVR 0x80000000
#define TAH_MR_SR 0x40000000
#define TAH_MR_ST_256 0x01000000
#define TAH_MR_ST_512 0x02000000
#define TAH_MR_ST_768 0x03000000
#define TAH_MR_ST_1024 0x04000000
#define TAH_MR_ST_1280 0x05000000
#define TAH_MR_ST_1536 0x06000000
#define TAH_MR_TFS_16KB 0x00000000
#define TAH_MR_TFS_2KB 0x00200000
#define TAH_MR_TFS_4KB 0x00400000
#define TAH_MR_TFS_6KB 0x00600000
#define TAH_MR_TFS_8KB 0x00800000
#define TAH_MR_TFS_10KB 0x00a00000
#define TAH_MR_DTFP 0x00100000
#define TAH_MR_DIG 0x00080000
#ifdef CONFIG_IBM_EMAC_TAH
int tah_attach(void *emac) __init;
void __tah_fini(struct ocp_device *ocpdev);
static inline void tah_fini(struct ocp_device *ocpdev)
{
if (ocpdev)
__tah_fini(ocpdev);
}
void __tah_reset(struct ocp_device *ocpdev);
static inline void tah_reset(struct ocp_device *ocpdev)
{
if (ocpdev)
__tah_reset(ocpdev);
}
int __tah_get_regs_len(struct ocp_device *ocpdev);
static inline int tah_get_regs_len(struct ocp_device *ocpdev)
{
return ocpdev ? __tah_get_regs_len(ocpdev) : 0;
}
void *tah_dump_regs(struct ocp_device *ocpdev, void *buf);
#else
# define tah_attach(x) 0
# define tah_fini(x) ((void)0)
# define tah_reset(x) ((void)0)
# define tah_get_regs_len(x) 0
# define tah_dump_regs(x,buf) (buf)
#endif /* !CONFIG_IBM_EMAC_TAH */
#endif /* _IBM_EMAC_TAH_H */
drivers/net/ibm_emac/ibm_emac_zmii.c deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_zmii.c
*
* Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* Based on original work by
* Armin Kuster <akuster@mvista.com>
* Copyright 2001 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/ethtool.h>
#include <asm/io.h>
#include "ibm_emac_core.h"
#include "ibm_emac_debug.h"
/* ZMIIx_FER */
#define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4))
#define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \
ZMII_FER_MDI(2) | ZMII_FER_MDI(3))
#define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4))
#define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4))
#define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4))
/* ZMIIx_SSR */
#define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4))
#define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4))
#define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4))
/* ZMII only supports MII, RMII and SMII
* we also support autodetection for backward compatibility
*/
static inline int zmii_valid_mode(int mode)
{
return mode == PHY_MODE_MII ||
mode == PHY_MODE_RMII ||
mode == PHY_MODE_SMII ||
mode == PHY_MODE_NA;
}
static inline const char *zmii_mode_name(int mode)
{
switch (mode) {
case PHY_MODE_MII:
return "MII";
case PHY_MODE_RMII:
return "RMII";
case PHY_MODE_SMII:
return "SMII";
default:
BUG();
}
}
static inline u32 zmii_mode_mask(int mode, int input)
{
switch (mode) {
case PHY_MODE_MII:
return ZMII_FER_MII(input);
case PHY_MODE_RMII:
return ZMII_FER_RMII(input);
case PHY_MODE_SMII:
return ZMII_FER_SMII(input);
default:
return 0;
}
}
static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode)
{
struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
struct zmii_regs __iomem *p;
ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode);
if (!dev) {
dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
if (!dev) {
printk(KERN_ERR
"zmii%d: couldn't allocate device structure!\n",
ocpdev->def->index);
return -ENOMEM;
}
dev->mode = PHY_MODE_NA;
p = ioremap(ocpdev->def->paddr, sizeof(struct zmii_regs));
if (!p) {
printk(KERN_ERR
"zmii%d: could not ioremap device registers!\n",
ocpdev->def->index);
kfree(dev);
return -ENOMEM;
}
dev->base = p;
ocp_set_drvdata(ocpdev, dev);
/* We may need FER value for autodetection later */
dev->fer_save = in_be32(&p->fer);
/* Disable all inputs by default */
out_be32(&p->fer, 0);
} else
p = dev->base;
if (!zmii_valid_mode(*mode)) {
/* Probably an EMAC connected to RGMII,
* but it still may need ZMII for MDIO
*/
goto out;
}
/* Autodetect ZMII mode if not specified.
* This is only for backward compatibility with the old driver.
* Please, always specify PHY mode in your board port to avoid
* any surprises.
*/
if (dev->mode == PHY_MODE_NA) {
if (*mode == PHY_MODE_NA) {
u32 r = dev->fer_save;
ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL,
ocpdev->def->index, r);
if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1)))
dev->mode = PHY_MODE_MII;
else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1)))
dev->mode = PHY_MODE_RMII;
else
dev->mode = PHY_MODE_SMII;
} else
dev->mode = *mode;
printk(KERN_NOTICE "zmii%d: bridge in %s mode\n",
ocpdev->def->index, zmii_mode_name(dev->mode));
} else {
/* All inputs must use the same mode */
if (*mode != PHY_MODE_NA && *mode != dev->mode) {
printk(KERN_ERR
"zmii%d: invalid mode %d specified for input %d\n",
ocpdev->def->index, *mode, input);
return -EINVAL;
}
}
/* Report back correct PHY mode,
* it may be used during PHY initialization.
*/
*mode = dev->mode;
/* Enable this input */
out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input));
out:
++dev->users;
return 0;
}
int __init zmii_attach(void *emac)
{
struct ocp_enet_private *dev = emac;
struct ocp_func_emac_data *emacdata = dev->def->additions;
if (emacdata->zmii_idx >= 0) {
dev->zmii_input = emacdata->zmii_mux;
dev->zmii_dev =
ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII,
emacdata->zmii_idx);
if (!dev->zmii_dev) {
printk(KERN_ERR "emac%d: unknown zmii%d!\n",
dev->def->index, emacdata->zmii_idx);
return -ENODEV;
}
if (zmii_init
(dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) {
printk(KERN_ERR
"emac%d: zmii%d initialization failed!\n",
dev->def->index, emacdata->zmii_idx);
return -ENODEV;
}
}
return 0;
}
void __zmii_enable_mdio(struct ocp_device *ocpdev, int input)
{
struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL;
ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input);
out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input));
}
void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
{
struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
u32 ssr = in_be32(&dev->base->ssr);
ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
if (speed == SPEED_100)
ssr |= ZMII_SSR_SP(input);
else
ssr &= ~ZMII_SSR_SP(input);
out_be32(&dev->base->ssr, ssr);
}
void __zmii_fini(struct ocp_device *ocpdev, int input)
{
struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
BUG_ON(!dev || dev->users == 0);
ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
/* Disable this input */
out_be32(&dev->base->fer,
in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input));
if (!--dev->users) {
/* Free everything if this is the last user */
ocp_set_drvdata(ocpdev, NULL);
iounmap(dev->base);
kfree(dev);
}
}
int __zmii_get_regs_len(struct ocp_device *ocpdev)
{
return sizeof(struct emac_ethtool_regs_subhdr) +
sizeof(struct zmii_regs);
}
void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf)
{
struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
struct emac_ethtool_regs_subhdr *hdr = buf;
struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1);
hdr->version = 0;
hdr->index = ocpdev->def->index;
memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs));
return regs + 1;
}
drivers/net/ibm_emac/ibm_emac_zmii.h deleted 100644 → 0
View file @ 30902dc3
/*
* drivers/net/ibm_emac/ibm_emac_zmii.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
*
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
* Based on original work by
* Armin Kuster <akuster@mvista.com>
* Copyright 2001 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef _IBM_EMAC_ZMII_H_
#define _IBM_EMAC_ZMII_H_
#include <linux/init.h>
#include <asm/ocp.h>
/* ZMII bridge registers */
struct zmii_regs {
u32 fer; /* Function enable reg */
u32 ssr; /* Speed select reg */
u32 smiirs; /* SMII status reg */
};
/* ZMII device */
struct ibm_ocp_zmii {
struct zmii_regs __iomem *base;
int mode; /* subset of PHY_MODE_XXXX */
int users; /* number of EMACs using this ZMII bridge */
u32 fer_save; /* FER value left by firmware */
};
#ifdef CONFIG_IBM_EMAC_ZMII
int zmii_attach(void *emac) __init;
void __zmii_fini(struct ocp_device *ocpdev, int input);
static inline void zmii_fini(struct ocp_device *ocpdev, int input)
{
if (ocpdev)
__zmii_fini(ocpdev, input);
}
void __zmii_enable_mdio(struct ocp_device *ocpdev, int input);
static inline void zmii_enable_mdio(struct ocp_device *ocpdev, int input)
{
if (ocpdev)
__zmii_enable_mdio(ocpdev, input);
}
void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
static inline void zmii_set_speed(struct ocp_device *ocpdev, int input,
int speed)
{
if (ocpdev)
__zmii_set_speed(ocpdev, input, speed);
}
int __zmii_get_regs_len(struct ocp_device *ocpdev);
static inline int zmii_get_regs_len(struct ocp_device *ocpdev)
{
return ocpdev ? __zmii_get_regs_len(ocpdev) : 0;
}
void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf);
#else
# define zmii_attach(x) 0
# define zmii_fini(x,y) ((void)0)
# define zmii_enable_mdio(x,y) ((void)0)
# define zmii_set_speed(x,y,z) ((void)0)
# define zmii_get_regs_len(x) 0
# define zmii_dump_regs(x,buf) (buf)
#endif /* !CONFIG_IBM_EMAC_ZMII */
#endif /* _IBM_EMAC_ZMII_H_ */
drivers/net/mv643xx_eth.c
View file @ 5bbc1722
This source diff could not be displayed because it is too large. You can view the blob instead.
drivers/net/sky2.c
View file @ 5bbc1722
...@@ -51,7 +51,7 @@ ...@@ -51,7 +51,7 @@
#include "sky2.h" #include "sky2.h"
#define DRV_NAME "sky2" #define DRV_NAME "sky2"
#define DRV_VERSION "1.21" #define DRV_VERSION "1.22"
#define PFX DRV_NAME " " #define PFX DRV_NAME " "
/* /*
...@@ -98,7 +98,7 @@ static int disable_msi = 0; ...@@ -98,7 +98,7 @@ static int disable_msi = 0;
module_param(disable_msi, int, 0); module_param(disable_msi, int, 0);
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
static const struct pci_device_id sky2_id_table[] = { static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
...@@ -136,6 +136,7 @@ static const struct pci_device_id sky2_id_table[] = { ...@@ -136,6 +136,7 @@ static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
{ 0 } { 0 }
}; };
...@@ -146,17 +147,6 @@ static const unsigned txqaddr[] = { Q_XA1, Q_XA2 }; ...@@ -146,17 +147,6 @@ static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
static const unsigned rxqaddr[] = { Q_R1, Q_R2 }; static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 }; static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
/* This driver supports yukon2 chipset only */
static const char *yukon2_name[] = {
"XL", /* 0xb3 */
"EC Ultra", /* 0xb4 */
"Extreme", /* 0xb5 */
"EC", /* 0xb6 */
"FE", /* 0xb7 */
"FE+", /* 0xb8 */
"Supreme", /* 0xb9 */
};
static void sky2_set_multicast(struct net_device *dev); static void sky2_set_multicast(struct net_device *dev);
/* Access to PHY via serial interconnect */ /* Access to PHY via serial interconnect */
...@@ -658,8 +648,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ...@@ -658,8 +648,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
} }
if (hw->chip_id == CHIP_ID_YUKON_EC_U && if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) {
hw->chip_rev == CHIP_REV_YU_EC_U_A1) {
/* apply fixes in PHY AFE */ /* apply fixes in PHY AFE */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255); gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
...@@ -667,9 +656,11 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ...@@ -667,9 +656,11 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
gm_phy_write(hw, port, 0x18, 0xaa99); gm_phy_write(hw, port, 0x18, 0xaa99);
gm_phy_write(hw, port, 0x17, 0x2011); gm_phy_write(hw, port, 0x17, 0x2011);
/* fix for IEEE A/B Symmetry failure in 1000BASE-T */ if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
gm_phy_write(hw, port, 0x18, 0xa204); /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
gm_phy_write(hw, port, 0x17, 0x2002); gm_phy_write(hw, port, 0x18, 0xa204);
gm_phy_write(hw, port, 0x17, 0x2002);
}
/* set page register to 0 */ /* set page register to 0 */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
...@@ -678,7 +669,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ...@@ -678,7 +669,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
/* apply workaround for integrated resistors calibration */ /* apply workaround for integrated resistors calibration */
gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17); gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60); gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
} else if (hw->chip_id != CHIP_ID_YUKON_EX) { } else if (hw->chip_id != CHIP_ID_YUKON_EX &&
hw->chip_id < CHIP_ID_YUKON_SUPR) {
/* no effect on Yukon-XL */ /* no effect on Yukon-XL */
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
...@@ -2818,6 +2810,7 @@ static u32 sky2_mhz(const struct sky2_hw *hw) ...@@ -2818,6 +2810,7 @@ static u32 sky2_mhz(const struct sky2_hw *hw)
case CHIP_ID_YUKON_EC_U: case CHIP_ID_YUKON_EC_U:
case CHIP_ID_YUKON_EX: case CHIP_ID_YUKON_EX:
case CHIP_ID_YUKON_SUPR: case CHIP_ID_YUKON_SUPR:
case CHIP_ID_YUKON_UL_2:
return 125; return 125;
case CHIP_ID_YUKON_FE: case CHIP_ID_YUKON_FE:
...@@ -2910,6 +2903,11 @@ static int __devinit sky2_init(struct sky2_hw *hw) ...@@ -2910,6 +2903,11 @@ static int __devinit sky2_init(struct sky2_hw *hw)
| SKY2_HW_ADV_POWER_CTL; | SKY2_HW_ADV_POWER_CTL;
break; break;
case CHIP_ID_YUKON_UL_2:
hw->flags = SKY2_HW_GIGABIT
| SKY2_HW_ADV_POWER_CTL;
break;
default: default:
dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n", dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
hw->chip_id); hw->chip_id);
...@@ -4265,12 +4263,34 @@ static int __devinit pci_wake_enabled(struct pci_dev *dev) ...@@ -4265,12 +4263,34 @@ static int __devinit pci_wake_enabled(struct pci_dev *dev)
return value & PCI_PM_CTRL_PME_ENABLE; return value & PCI_PM_CTRL_PME_ENABLE;
} }
/* This driver supports yukon2 chipset only */
static const char *sky2_name(u8 chipid, char *buf, int sz)
{
const char *name[] = {
"XL", /* 0xb3 */
"EC Ultra", /* 0xb4 */
"Extreme", /* 0xb5 */
"EC", /* 0xb6 */
"FE", /* 0xb7 */
"FE+", /* 0xb8 */
"Supreme", /* 0xb9 */
"UL 2", /* 0xba */
};
if (chipid >= CHIP_ID_YUKON_XL && chipid < CHIP_ID_YUKON_UL_2)
strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz);
else
snprintf(buf, sz, "(chip %#x)", chipid);
return buf;
}
static int __devinit sky2_probe(struct pci_dev *pdev, static int __devinit sky2_probe(struct pci_dev *pdev,
const struct pci_device_id *ent) const struct pci_device_id *ent)
{ {
struct net_device *dev; struct net_device *dev;
struct sky2_hw *hw; struct sky2_hw *hw;
int err, using_dac = 0, wol_default; int err, using_dac = 0, wol_default;
char buf1[16];
err = pci_enable_device(pdev); err = pci_enable_device(pdev);
if (err) { if (err) {
...@@ -4341,10 +4361,10 @@ static int __devinit sky2_probe(struct pci_dev *pdev, ...@@ -4341,10 +4361,10 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
if (err) if (err)
goto err_out_iounmap; goto err_out_iounmap;
dev_info(&pdev->dev, "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n", dev_info(&pdev->dev, "v%s addr 0x%llx irq %d Yukon-2 %s rev %d\n",
DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0), DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0),
pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL], pdev->irq, sky2_name(hw->chip_id, buf1, sizeof(buf1)),
hw->chip_id, hw->chip_rev); hw->chip_rev);
sky2_reset(hw); sky2_reset(hw);
......
drivers/net/sky2.h
View file @ 5bbc1722
...@@ -441,6 +441,7 @@ enum { ...@@ -441,6 +441,7 @@ enum {
CHIP_ID_YUKON_FE = 0xb7, /* YUKON-2 FE */ CHIP_ID_YUKON_FE = 0xb7, /* YUKON-2 FE */
CHIP_ID_YUKON_FE_P = 0xb8, /* YUKON-2 FE+ */ CHIP_ID_YUKON_FE_P = 0xb8, /* YUKON-2 FE+ */
CHIP_ID_YUKON_SUPR = 0xb9, /* YUKON-2 Supreme */ CHIP_ID_YUKON_SUPR = 0xb9, /* YUKON-2 Supreme */
CHIP_ID_YUKON_UL_2 = 0xba, /* YUKON-2 Ultra 2 */
}; };
enum yukon_ec_rev { enum yukon_ec_rev {
CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */ CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */
......
include/linux/mv643xx_eth.h
View file @ 5bbc1722
...@@ -17,30 +17,59 @@ ...@@ -17,30 +17,59 @@
struct mv643xx_eth_shared_platform_data { struct mv643xx_eth_shared_platform_data {
struct mbus_dram_target_info *dram; struct mbus_dram_target_info *dram;
unsigned int t_clk; unsigned int t_clk;
}; };
struct mv643xx_eth_platform_data { struct mv643xx_eth_platform_data {
/*
* Pointer back to our parent instance, and our port number.
*/
struct platform_device *shared; struct platform_device *shared;
int port_number; int port_number;
/*
* Whether a PHY is present, and if yes, at which address.
*/
struct platform_device *shared_smi; struct platform_device *shared_smi;
int force_phy_addr;
int phy_addr;
u16 force_phy_addr; /* force override if phy_addr == 0 */ /*
u16 phy_addr; * Use this MAC address if it is valid, overriding the
* address that is already in the hardware.
/* If speed is 0, then speed and duplex are autonegotiated. */ */
int speed; /* 0, SPEED_10, SPEED_100, SPEED_1000 */ u8 mac_addr[6];
int duplex; /* DUPLEX_HALF or DUPLEX_FULL */
/*
/* non-zero values of the following fields override defaults */ * If speed is 0, autonegotiation is enabled.
u32 tx_queue_size; * Valid values for speed: 0, SPEED_10, SPEED_100, SPEED_1000.
u32 rx_queue_size; * Valid values for duplex: DUPLEX_HALF, DUPLEX_FULL.
u32 tx_sram_addr; */
u32 tx_sram_size; int speed;
u32 rx_sram_addr; int duplex;
u32 rx_sram_size;
u8 mac_addr[6]; /* mac address if non-zero*/ /*
* Which RX/TX queues to use.
*/
int rx_queue_mask;
int tx_queue_mask;
/*
* Override default RX/TX queue sizes if nonzero.
*/
int rx_queue_size;
int tx_queue_size;
/*
* Use on-chip SRAM for RX/TX descriptors if size is nonzero
* and sufficient to contain all descriptors for the requested
* ring sizes.
*/
unsigned long rx_sram_addr;
int rx_sram_size;
unsigned long tx_sram_addr;
int tx_sram_size;
}; };
#endif /* __LINUX_MV643XX_ETH_H */
#endif
include/linux/netdevice.h
View file @ 5bbc1722
...@@ -1479,6 +1479,7 @@ extern void __dev_addr_unsync(struct dev_addr_list **to, int *to_count, struct ...@@ -1479,6 +1479,7 @@ extern void __dev_addr_unsync(struct dev_addr_list **to, int *to_count, struct
extern void dev_set_promiscuity(struct net_device *dev, int inc); extern void dev_set_promiscuity(struct net_device *dev, int inc);
extern void dev_set_allmulti(struct net_device *dev, int inc); extern void dev_set_allmulti(struct net_device *dev, int inc);
extern void netdev_state_change(struct net_device *dev); extern void netdev_state_change(struct net_device *dev);
extern void netdev_bonding_change(struct net_device *dev);
extern void netdev_features_change(struct net_device *dev); extern void netdev_features_change(struct net_device *dev);
/* Load a device via the kmod */ /* Load a device via the kmod */
extern void dev_load(struct net *net, const char *name); extern void dev_load(struct net *net, const char *name);
...@@ -1505,6 +1506,9 @@ extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos); ...@@ -1505,6 +1506,9 @@ extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos);
extern void dev_seq_stop(struct seq_file *seq, void *v); extern void dev_seq_stop(struct seq_file *seq, void *v);
#endif #endif
extern int netdev_class_create_file(struct class_attribute *class_attr);
extern void netdev_class_remove_file(struct class_attribute *class_attr);
extern void linkwatch_run_queue(void); extern void linkwatch_run_queue(void);
extern int netdev_compute_features(unsigned long all, unsigned long one); extern int netdev_compute_features(unsigned long all, unsigned long one);
......
include/linux/notifier.h
View file @ 5bbc1722
...@@ -197,6 +197,7 @@ static inline int notifier_to_errno(int ret) ...@@ -197,6 +197,7 @@ static inline int notifier_to_errno(int ret)
#define NETDEV_GOING_DOWN 0x0009 #define NETDEV_GOING_DOWN 0x0009
#define NETDEV_CHANGENAME 0x000A #define NETDEV_CHANGENAME 0x000A
#define NETDEV_FEAT_CHANGE 0x000B #define NETDEV_FEAT_CHANGE 0x000B
#define NETDEV_BONDING_FAILOVER 0x000C
#define SYS_DOWN 0x0001 /* Notify of system down */ #define SYS_DOWN 0x0001 /* Notify of system down */
#define SYS_RESTART SYS_DOWN #define SYS_RESTART SYS_DOWN
......
net/core/dev.c
View file @ 5bbc1722
...@@ -961,6 +961,12 @@ void netdev_state_change(struct net_device *dev) ...@@ -961,6 +961,12 @@ void netdev_state_change(struct net_device *dev)
} }
} }
void netdev_bonding_change(struct net_device *dev)
{
call_netdevice_notifiers(NETDEV_BONDING_FAILOVER, dev);
}
EXPORT_SYMBOL(netdev_bonding_change);
/** /**
* dev_load - load a network module * dev_load - load a network module
* @net: the applicable net namespace * @net: the applicable net namespace
......
net/core/net-sysfs.c
View file @ 5bbc1722
...@@ -468,6 +468,19 @@ int netdev_register_kobject(struct net_device *net) ...@@ -468,6 +468,19 @@ int netdev_register_kobject(struct net_device *net)
return device_add(dev); return device_add(dev);
} }
int netdev_class_create_file(struct class_attribute *class_attr)
{
return class_create_file(&net_class, class_attr);
}
void netdev_class_remove_file(struct class_attribute *class_attr)
{
class_remove_file(&net_class, class_attr);
}
EXPORT_SYMBOL(netdev_class_create_file);
EXPORT_SYMBOL(netdev_class_remove_file);
void netdev_initialize_kobject(struct net_device *net) void netdev_initialize_kobject(struct net_device *net)
{ {
struct device *device = &(net->dev); struct device *device = &(net->dev);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7