Commit 5bcaa5fb authored by Joonyoung Shim's avatar Joonyoung Shim Committed by Ben Hutchings

USB: add reset resume quirk for usb3503

commit 526a4045 upstream.

The usb device will autoresume from choose_wakeup() if it is
autosuspended with the wrong wakeup setting, but below errors occur
because usb3503 misc driver will switch to standby mode when suspended.

As add USB_QUIRK_RESET_RESUME, it can stop setting wrong wakeup from
autosuspend_check().

[    7.734717] usb 1-3: reset high-speed USB device number 3 using exynos-ehci
[    7.854658] usb 1-3: device descriptor read/64, error -71
[    8.079657] usb 1-3: device descriptor read/64, error -71
[    8.294664] usb 1-3: reset high-speed USB device number 3 using exynos-ehci
[    8.414658] usb 1-3: device descriptor read/64, error -71
[    8.639657] usb 1-3: device descriptor read/64, error -71
[    8.854667] usb 1-3: reset high-speed USB device number 3 using exynos-ehci
[    9.264598] usb 1-3: device not accepting address 3, error -71
[    9.374655] usb 1-3: reset high-speed USB device number 3 using exynos-ehci
[    9.784601] usb 1-3: device not accepting address 3, error -71
[    9.784838] usb usb1-port3: device 1-3 not suspended yet
Signed-off-by: default avatarJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
parent 557e62e8
......@@ -154,6 +154,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* INTEL VALUE SSD */
{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
/* USB3503 */
{ USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },
{ } /* terminating entry must be last */
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment