Bluetooth: hci_qca: Add helper to set device address

This patch add qca_set_bdaddr() to set the device
address for latest Qualcomm Bluetooth chipset wcn3990 and above.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

drivers/bluetooth/btqca.c

@@ -391,6 +391,25 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 }
 EXPORT_SYMBOL_GPL(qca_uart_setup);
 
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
+				HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr);
+
 MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
 MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
 MODULE_VERSION(VERSION);

drivers/bluetooth/btqca.h

@@ -20,6 +20,7 @@
 
 #define EDL_PATCH_CMD_OPCODE		(0xFC00)
 #define EDL_NVM_ACCESS_OPCODE		(0xFC0B)
+#define EDL_WRITE_BD_ADDR_OPCODE	(0xFC14)
 #define EDL_PATCH_CMD_LEN		(1)
 #define EDL_PATCH_VER_REQ_CMD		(0x19)
 #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
@@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		   enum qca_btsoc_type soc_type, u32 soc_ver);
 int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
-
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 #else
 
 static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
@@ -159,4 +160,9 @@ static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version)
 	return -EOPNOTSUPP;
 }
 
+static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
 #endif

drivers/bluetooth/hci_qca.c

@@ -1241,6 +1241,9 @@ static int qca_setup(struct hci_uart *hu)
 	}
 
 	/* Setup bdaddr */
+	if (qcadev->btsoc_type == QCA_WCN3990)
+		hu->hdev->set_bdaddr = qca_set_bdaddr;
+	else
 		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
 
 	return ret;