RISC-V: Fix compilation without RISCV_ISA_ZICBOM

riscv_cbom_block_size and riscv_init_cbom_blocksize() should always
be available and riscv_init_cbom_blocksize() should always be
invoked, even when compiling without RISCV_ISA_ZICBOM enabled. This
is because disabling RISCV_ISA_ZICBOM means "don't use zicbom
instructions in the kernel" not "pretend there isn't zicbom, even
when there is". When zicbom is available, whether the kernel enables
its use with RISCV_ISA_ZICBOM or not, KVM will offer it to guests.
Ensure we can build KVM and that the block size is initialized even
when compiling without RISCV_ISA_ZICBOM.

Fixes: 8f7e001e ("RISC-V: Clean up the Zicbom block size probing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Anup Patel <anup@brainfault.org>

arch/riscv/include/asm/cacheflush.h

@@ -42,16 +42,8 @@ void flush_icache_mm(struct mm_struct *mm, bool local);
 
 #endif /* CONFIG_SMP */
 
-/*
- * The T-Head CMO errata internally probe the CBOM block size, but otherwise
- * don't depend on Zicbom.
- */
 extern unsigned int riscv_cbom_block_size;
-#ifdef CONFIG_RISCV_ISA_ZICBOM
 void riscv_init_cbom_blocksize(void);
-#else
-static inline void riscv_init_cbom_blocksize(void) { }
-#endif
 
 #ifdef CONFIG_RISCV_DMA_NONCOHERENT
 void riscv_noncoherent_supported(void);

arch/riscv/mm/cacheflush.c

@@ -3,6 +3,7 @@
  * Copyright (C) 2017 SiFive
  */
 
+#include <linux/of.h>
 #include <asm/cacheflush.h>
 
 #ifdef CONFIG_SMP
@@ -86,3 +87,40 @@ void flush_icache_pte(pte_t pte)
 		flush_icache_all();
 }
 #endif /* CONFIG_MMU */
+
+unsigned int riscv_cbom_block_size;
+EXPORT_SYMBOL_GPL(riscv_cbom_block_size);
+
+void riscv_init_cbom_blocksize(void)
+{
+	struct device_node *node;
+	unsigned long cbom_hartid;
+	u32 val, probed_block_size;
+	int ret;
+
+	probed_block_size = 0;
+	for_each_of_cpu_node(node) {
+		unsigned long hartid;
+
+		ret = riscv_of_processor_hartid(node, &hartid);
+		if (ret)
+			continue;
+
+		/* set block-size for cbom extension if available */
+		ret = of_property_read_u32(node, "riscv,cbom-block-size", &val);
+		if (ret)
+			continue;
+
+		if (!probed_block_size) {
+			probed_block_size = val;
+			cbom_hartid = hartid;
+		} else {
+			if (probed_block_size != val)
+				pr_warn("cbom-block-size mismatched between harts %lu and %lu\n",
+					cbom_hartid, hartid);
+		}
+	}
+
+	if (probed_block_size)
+		riscv_cbom_block_size = probed_block_size;
+}

arch/riscv/mm/dma-noncoherent.c

@@ -8,13 +8,8 @@
 #include <linux/dma-direct.h>
 #include <linux/dma-map-ops.h>
 #include <linux/mm.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
 #include <asm/cacheflush.h>
 
-unsigned int riscv_cbom_block_size;
-EXPORT_SYMBOL_GPL(riscv_cbom_block_size);
-
 static bool noncoherent_supported;
 
 void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
@@ -77,42 +72,6 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	dev->dma_coherent = coherent;
 }
 
-#ifdef CONFIG_RISCV_ISA_ZICBOM
-void riscv_init_cbom_blocksize(void)
-{
-	struct device_node *node;
-	unsigned long cbom_hartid;
-	u32 val, probed_block_size;
-	int ret;
-
-	probed_block_size = 0;
-	for_each_of_cpu_node(node) {
-		unsigned long hartid;
-
-		ret = riscv_of_processor_hartid(node, &hartid);
-		if (ret)
-			continue;
-
-		/* set block-size for cbom extension if available */
-		ret = of_property_read_u32(node, "riscv,cbom-block-size", &val);
-		if (ret)
-			continue;
-
-		if (!probed_block_size) {
-			probed_block_size = val;
-			cbom_hartid = hartid;
-		} else {
-			if (probed_block_size != val)
-				pr_warn("cbom-block-size mismatched between harts %lu and %lu\n",
-					cbom_hartid, hartid);
-		}
-	}
-
-	if (probed_block_size)
-		riscv_cbom_block_size = probed_block_size;
-}
-#endif
-
 void riscv_noncoherent_supported(void)
 {
 	WARN(!riscv_cbom_block_size,