Commit 5e3644a9 authored by Florian Fainelli's avatar Florian Fainelli Committed by Ralf Baechle

MIPS: BCM63xx: Fix build failure in board_bcm963xx.c

Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered
in the board_prom_init callback, but it references variables and functions
which are declared below.  Move the variables and functions above
board_prom_init.
Signed-off-by: default avatarFlorian Fainelli <ffainelli@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1077/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 5808184f
...@@ -618,6 +618,76 @@ static const struct board_info __initdata *bcm963xx_boards[] = { ...@@ -618,6 +618,76 @@ static const struct board_info __initdata *bcm963xx_boards[] = {
#endif #endif
}; };
/*
* Register a sane SPROMv2 to make the on-board
* bcm4318 WLAN work
*/
#ifdef CONFIG_SSB_PCIHOST
static struct ssb_sprom bcm63xx_sprom = {
.revision = 0x02,
.board_rev = 0x17,
.country_code = 0x0,
.ant_available_bg = 0x3,
.pa0b0 = 0x15ae,
.pa0b1 = 0xfa85,
.pa0b2 = 0xfe8d,
.pa1b0 = 0xffff,
.pa1b1 = 0xffff,
.pa1b2 = 0xffff,
.gpio0 = 0xff,
.gpio1 = 0xff,
.gpio2 = 0xff,
.gpio3 = 0xff,
.maxpwr_bg = 0x004c,
.itssi_bg = 0x00,
.boardflags_lo = 0x2848,
.boardflags_hi = 0x0000,
};
#endif
/*
* return board name for /proc/cpuinfo
*/
const char *board_get_name(void)
{
return board.name;
}
/*
* register & return a new board mac address
*/
static int board_get_mac_address(u8 *mac)
{
u8 *p;
int count;
if (mac_addr_used >= nvram.mac_addr_count) {
printk(KERN_ERR PFX "not enough mac address\n");
return -ENODEV;
}
memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
p = mac + ETH_ALEN - 1;
count = mac_addr_used;
while (count--) {
do {
(*p)++;
if (*p != 0)
break;
p--;
} while (p != mac);
}
if (p == mac) {
printk(KERN_ERR PFX "unable to fetch mac address\n");
return -ENODEV;
}
mac_addr_used++;
return 0;
}
/* /*
* early init callback, read nvram data from flash and checksum it * early init callback, read nvram data from flash and checksum it
*/ */
...@@ -744,49 +814,6 @@ void __init board_setup(void) ...@@ -744,49 +814,6 @@ void __init board_setup(void)
panic("unexpected CPU for bcm963xx board"); panic("unexpected CPU for bcm963xx board");
} }
/*
* return board name for /proc/cpuinfo
*/
const char *board_get_name(void)
{
return board.name;
}
/*
* register & return a new board mac address
*/
static int board_get_mac_address(u8 *mac)
{
u8 *p;
int count;
if (mac_addr_used >= nvram.mac_addr_count) {
printk(KERN_ERR PFX "not enough mac address\n");
return -ENODEV;
}
memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
p = mac + ETH_ALEN - 1;
count = mac_addr_used;
while (count--) {
do {
(*p)++;
if (*p != 0)
break;
p--;
} while (p != mac);
}
if (p == mac) {
printk(KERN_ERR PFX "unable to fetch mac address\n");
return -ENODEV;
}
mac_addr_used++;
return 0;
}
static struct mtd_partition mtd_partitions[] = { static struct mtd_partition mtd_partitions[] = {
{ {
.name = "cfe", .name = "cfe",
...@@ -818,33 +845,6 @@ static struct platform_device mtd_dev = { ...@@ -818,33 +845,6 @@ static struct platform_device mtd_dev = {
}, },
}; };
/*
* Register a sane SPROMv2 to make the on-board
* bcm4318 WLAN work
*/
#ifdef CONFIG_SSB_PCIHOST
static struct ssb_sprom bcm63xx_sprom = {
.revision = 0x02,
.board_rev = 0x17,
.country_code = 0x0,
.ant_available_bg = 0x3,
.pa0b0 = 0x15ae,
.pa0b1 = 0xfa85,
.pa0b2 = 0xfe8d,
.pa1b0 = 0xffff,
.pa1b1 = 0xffff,
.pa1b2 = 0xffff,
.gpio0 = 0xff,
.gpio1 = 0xff,
.gpio2 = 0xff,
.gpio3 = 0xff,
.maxpwr_bg = 0x004c,
.itssi_bg = 0x00,
.boardflags_lo = 0x2848,
.boardflags_hi = 0x0000,
};
#endif
static struct gpio_led_platform_data bcm63xx_led_data; static struct gpio_led_platform_data bcm63xx_led_data;
static struct platform_device bcm63xx_gpio_leds = { static struct platform_device bcm63xx_gpio_leds = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment