watchdog: lpc18xx: Use devm_clk_get_enabled() helper

The devm_clk_get_enabled() helper:
   - calls devm_clk_get()
   - calls clk_prepare_enable() and registers what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/d4c675190d3ddfbba5c354edb4274757f9117304.1672489554.git.christophe.jaillet@wanadoo.frSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

drivers/watchdog/lpc18xx_wdt.c

@@ -197,16 +197,10 @@ static const struct watchdog_ops lpc18xx_wdt_ops = {
 	.restart        = lpc18xx_wdt_restart,
 };
 
-static void lpc18xx_clk_disable_unprepare(void *data)
-{
-	clk_disable_unprepare(data);
-}
-
 static int lpc18xx_wdt_probe(struct platform_device *pdev)
 {
 	struct lpc18xx_wdt_dev *lpc18xx_wdt;
 	struct device *dev = &pdev->dev;
-	int ret;
 
 	lpc18xx_wdt = devm_kzalloc(dev, sizeof(*lpc18xx_wdt), GFP_KERNEL);
 	if (!lpc18xx_wdt)
@@ -216,38 +210,18 @@ static int lpc18xx_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(lpc18xx_wdt->base))
 		return PTR_ERR(lpc18xx_wdt->base);
 
-	lpc18xx_wdt->reg_clk = devm_clk_get(dev, "reg");
+	lpc18xx_wdt->reg_clk = devm_clk_get_enabled(dev, "reg");
 	if (IS_ERR(lpc18xx_wdt->reg_clk)) {
 		dev_err(dev, "failed to get the reg clock\n");
 		return PTR_ERR(lpc18xx_wdt->reg_clk);
 	}
 
-	lpc18xx_wdt->wdt_clk = devm_clk_get(dev, "wdtclk");
+	lpc18xx_wdt->wdt_clk = devm_clk_get_enabled(dev, "wdtclk");
 	if (IS_ERR(lpc18xx_wdt->wdt_clk)) {
 		dev_err(dev, "failed to get the wdt clock\n");
 		return PTR_ERR(lpc18xx_wdt->wdt_clk);
 	}
 
-	ret = clk_prepare_enable(lpc18xx_wdt->reg_clk);
-	if (ret) {
-		dev_err(dev, "could not prepare or enable sys clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, lpc18xx_clk_disable_unprepare,
-				       lpc18xx_wdt->reg_clk);
-	if (ret)
-		return ret;
-
-	ret = clk_prepare_enable(lpc18xx_wdt->wdt_clk);
-	if (ret) {
-		dev_err(dev, "could not prepare or enable wdt clock\n");
-		return ret;
-	}
-	ret = devm_add_action_or_reset(dev, lpc18xx_clk_disable_unprepare,
-				       lpc18xx_wdt->wdt_clk);
-	if (ret)
-		return ret;
-
 	/* We use the clock rate to calculate timeouts */
 	lpc18xx_wdt->clk_rate = clk_get_rate(lpc18xx_wdt->wdt_clk);
 	if (lpc18xx_wdt->clk_rate == 0) {