tty: xuartps: Move RX path into helper function

Move RX-related IRQ handling into a helper function.
Fixes a problem where every char received after a parity or frame error
in the current isr will also be tagged as a parity or frame error.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/xilinx_uartps.c

@@ -172,28 +172,8 @@ struct cdns_uart {
 #define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
 		clk_rate_change_nb);
 
-/**
- * cdns_uart_isr - Interrupt handler
- * @irq: Irq number
- * @dev_id: Id of the port
- *
- * Return: IRQHANDLED
- */
-static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
+static void cdns_uart_handle_rx(struct uart_port *port, unsigned int isrstatus)
 {
-	struct uart_port *port = (struct uart_port *)dev_id;
-	unsigned long flags;
-	unsigned int isrstatus, numbytes;
-	unsigned int data;
-	char status = TTY_NORMAL;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	/* Read the interrupt status register to determine which
-	 * interrupt(s) is/are active.
-	 */
-	isrstatus = readl(port->membase + CDNS_UART_ISR_OFFSET);
-
 	/*
 	 * There is no hardware break detection, so we interpret framing
 	 * error with all-zeros data as a break sequence. Most of the time,
@@ -223,6 +203,9 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
 		/* Receive Timeout Interrupt */
 		while (!(readl(port->membase + CDNS_UART_SR_OFFSET) &
 					CDNS_UART_SR_RXEMPTY)) {
+			u32 data;
+			char status = TTY_NORMAL;
+
 			data = readl(port->membase + CDNS_UART_FIFO_OFFSET);
 
 			/* Non-NULL byte after BREAK is garbage (99%) */
@@ -267,6 +250,29 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
 		}
 		tty_flip_buffer_push(&port->state->port);
 	}
+}
+
+/**
+ * cdns_uart_isr - Interrupt handler
+ * @irq: Irq number
+ * @dev_id: Id of the port
+ *
+ * Return: IRQHANDLED
+ */
+static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
+{
+	struct uart_port *port = (struct uart_port *)dev_id;
+	unsigned long flags;
+	unsigned int isrstatus, numbytes;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Read the interrupt status register to determine which
+	 * interrupt(s) is/are active.
+	 */
+	isrstatus = readl(port->membase + CDNS_UART_ISR_OFFSET);
+
+	cdns_uart_handle_rx(port, isrstatus);
 
 	/* Dispatch an appropriate handler */
 	if ((isrstatus & CDNS_UART_IXR_TXEMPTY) == CDNS_UART_IXR_TXEMPTY) {