Commit 5ee863be authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'parisc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc updates from Helge Deller:
 "A change to increase the default maximum stack size on parisc to 100MB
  and the ability to further increase the stack hard limit size at
  runtime with ulimit for newly started processes.

  The other patches fix compile warnings, utilize the Kbuild logic and
  cleanups the parisc arch code"

* 'parisc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: pci-dma: fix warning unused-function
  parisc/uapi: Use Kbuild logic to provide <asm/types.h>
  parisc: Make user stack size configurable
  parisc: Use _TIF_USER_WORK_MASK in entry.S
  parisc: Drop loops_per_jiffy from per_cpu struct
parents 8312f41f 39b1e779
......@@ -45,15 +45,12 @@
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX DEFAULT_TASK_SIZE
/* Allow bigger stacks for 64-bit processes */
#define STACK_SIZE_MAX (USER_WIDE_MODE \
? (1 << 30) /* 1 GB */ \
: (CONFIG_MAX_STACK_SIZE_MB*1024*1024))
#endif
#ifndef __ASSEMBLY__
unsigned long calc_max_stack_size(unsigned long stack_max);
/*
* Data detected about CPUs at boot time which is the same for all CPU's.
* HP boxes are SMP - ie identical processors.
......@@ -97,7 +94,6 @@ struct cpuinfo_parisc {
unsigned long cpu_loc; /* CPU location from PAT firmware */
unsigned int state;
struct parisc_device *dev;
unsigned long loops_per_jiffy;
};
extern struct system_cpuinfo_parisc boot_cpu_data;
......
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _PARISC_TYPES_H
#define _PARISC_TYPES_H
#include <asm-generic/int-ll64.h>
#endif
......@@ -887,7 +887,7 @@ intr_check_sig:
/* As above */
mfctl %cr30,%r1
LDREG TI_FLAGS(%r1),%r19
ldi (_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), %r20
ldi (_TIF_USER_WORK_MASK & ~_TIF_NEED_RESCHED), %r20
and,COND(<>) %r19, %r20, %r0
b,n intr_restore /* skip past if we've nothing to do */
......@@ -1810,7 +1810,7 @@ syscall_check_resched:
.import do_signal,code
syscall_check_sig:
LDREG TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19
ldi (_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), %r26
ldi (_TIF_USER_WORK_MASK & ~_TIF_NEED_RESCHED), %r26
and,COND(<>) %r19, %r26, %r0
b,n syscall_restore /* skip past if we've nothing to do */
......
......@@ -335,7 +335,7 @@ pcxl_free_range(unsigned long vaddr, size_t size)
dump_resmap();
}
static int proc_pcxl_dma_show(struct seq_file *m, void *v)
static int __maybe_unused proc_pcxl_dma_show(struct seq_file *m, void *v)
{
#if 0
u_long i = 0;
......
......@@ -163,7 +163,6 @@ static int __init processor_probe(struct parisc_device *dev)
if (cpuid)
memset(p, 0, sizeof(struct cpuinfo_parisc));
p->loops_per_jiffy = loops_per_jiffy;
p->dev = dev; /* Save IODC data in case we need it */
p->hpa = dev->hpa.start; /* save CPU hpa */
p->cpuid = cpuid; /* save CPU id */
......@@ -434,8 +433,8 @@ show_cpuinfo (struct seq_file *m, void *v)
show_cache_info(m);
seq_printf(m, "bogomips\t: %lu.%02lu\n",
cpuinfo->loops_per_jiffy / (500000 / HZ),
(cpuinfo->loops_per_jiffy / (5000 / HZ)) % 100);
loops_per_jiffy / (500000 / HZ),
loops_per_jiffy / (5000 / HZ) % 100);
seq_printf(m, "software id\t: %ld\n\n",
boot_cpu_data.pdc.model.sw_id);
......
......@@ -53,6 +53,25 @@ static inline unsigned long COLOR_ALIGN(unsigned long addr,
return base + off;
}
#define STACK_SIZE_DEFAULT (USER_WIDE_MODE \
? (1 << 30) /* 1 GB */ \
: (CONFIG_STACK_MAX_DEFAULT_SIZE_MB*1024*1024))
unsigned long calc_max_stack_size(unsigned long stack_max)
{
#ifdef CONFIG_COMPAT
if (!USER_WIDE_MODE && (stack_max == COMPAT_RLIM_INFINITY))
stack_max = STACK_SIZE_DEFAULT;
else
#endif
if (stack_max == RLIM_INFINITY)
stack_max = STACK_SIZE_DEFAULT;
return stack_max;
}
/*
* Top of mmap area (just below the process stack).
*/
......@@ -69,8 +88,8 @@ static unsigned long mmap_upper_limit(struct rlimit *rlim_stack)
/* Limit stack size - see setup_arg_pages() in fs/exec.c */
stack_base = rlim_stack ? rlim_stack->rlim_max
: rlimit_max(RLIMIT_STACK);
if (stack_base > STACK_SIZE_MAX)
stack_base = STACK_SIZE_MAX;
stack_base = calc_max_stack_size(stack_base);
/* Add space for stack randomization. */
if (current->flags & PF_RANDOMIZE)
......
......@@ -757,8 +757,8 @@ int setup_arg_pages(struct linux_binprm *bprm,
#ifdef CONFIG_STACK_GROWSUP
/* Limit stack size */
stack_base = bprm->rlim_stack.rlim_max;
if (stack_base > STACK_SIZE_MAX)
stack_base = STACK_SIZE_MAX;
stack_base = calc_max_stack_size(stack_base);
/* Add space for stack randomization. */
stack_base += (STACK_RND_MASK << PAGE_SHIFT);
......
......@@ -720,19 +720,17 @@ config ZSMALLOC_STAT
config GENERIC_EARLY_IOREMAP
bool
config MAX_STACK_SIZE_MB
int "Maximum user stack size for 32-bit processes (MB)"
default 80
config STACK_MAX_DEFAULT_SIZE_MB
int "Default maximum user stack size for 32-bit processes (MB)"
default 100
range 8 2048
depends on STACK_GROWSUP && (!64BIT || COMPAT)
help
This is the maximum stack size in Megabytes in the VM layout of 32-bit
user processes when the stack grows upwards (currently only on parisc
arch). The stack will be located at the highest memory address minus
the given value, unless the RLIMIT_STACK hard limit is changed to a
smaller value in which case that is used.
arch) when the RLIMIT_STACK hard limit is unlimited.
A sane initial value is 80 MB.
A sane initial value is 100 MB.
config DEFERRED_STRUCT_PAGE_INIT
bool "Defer initialisation of struct pages to kthreads"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment