Merge branch 'for-3.13/drivers' of git://git.kernel.dk/linux-block

Pull block driver updates from Jens Axboe:
 "This is the block driver pull request for 3.13.  As with the core pull
  request just sent out, this was rebased on top of the core branch
  again after the immutable series was pulled.  This also means that
  bcache gets to sit the initial pull over.  I will send a second driver
  pull request in the merge window to get those fixes in, once they have
  been rebased and tested on top of the non-immutable stack.

  This pull request contains:

   - Add support for the sTec Kronos pci-e flash card from sTec.  Also
     has various cleanups for this driver, from myself, Bart, Mike
     Snizter, and Wei Yongjun.

   - Add surprise removal support for the micron mtip32xx driver from
     Micron.

   - Floppy documentation fix from Ben Harris.

   - debugfs bug fix for pktcdvd from Dan Carpenter.

   - Fix for the mtip32xx driver stack usage in the debugfs path,
     dynamically allocating those buffers instead.  From David Milburn.

   - Disable cpqarray in Kconfig.  The plan is to remove it on request
     of HP, but lets disable it for a few revisions just to see if
     anyone yells.

   - drbd fixes from Lars Ellenberg and Philipp Reisner.

   - Elevator switch fix for the s390 block driver from Heiko Carstens.

   - loop crash fix on IO to unassigned device from Mikulas Patocka.

   - A series of bug fixes for the IBM rsxx pci-e flash driver from
     Philip J Kelleher.

   - cciss probe fix from Stephen Cameron.

   - Xen block front/back fixes from Roger Pau Monne and Vegard Nossum"

* 'for-3.13/drivers' of git://git.kernel.dk/linux-block: (41 commits)
  floppy: Correct documentation of driver options when used as a module.
  pktcdvd: debugfs functions return NULL on error
  xen-blkfront: restore the non-persistent data path
  skd: fix formatting in skd_s1120.h
  skd: reorder construct/destruct code
  skd: cleanup skd_do_inq_page_da()
  skd: remove SKD_OMIT_FROM_SRC_DIST ifdefs
  skd: remove redundant skdev->pdev assignment from skd_pci_probe()
  skd: use <asm/unaligned.h>
  skd: remove SCSI subsystem specific includes
  skd: register block device only if some devices are present
  skd: fix error messages in skd_init()
  skd: fix error paths in skd_init()
  skd: fix unregister_blkdev() placement
  skd: more removal of bio-based code
  skd: cleanup the skd_*() function block wrapping
  skd: rip out bio path
  skd: fix error return code in skd_pci_probe()
  s390/dasd: hold request queue sysfs lock when calling elevator_init()
  cciss: return 0 from driver probe function on success, not 1
  ...

Documentation/blockdev/floppy.txt

@@ -39,15 +39,15 @@ Module configuration options
 ============================
 
  If you use the floppy driver as a module, use the following syntax:
-modprobe floppy <options>
+modprobe floppy floppy="<options>"
 
 Example:
- modprobe floppy omnibook messages
+ modprobe floppy floppy="omnibook messages"
 
  If you need certain options enabled every time you load the floppy driver,
 you can put:
 
- options floppy omnibook messages
+ options floppy floppy="omnibook messages"
 
 in a configuration file in /etc/modprobe.d/.
 

drivers/block/Kconfig

@@ -110,7 +110,7 @@ source "drivers/block/mtip32xx/Kconfig"
 
 config BLK_CPQ_DA
 	tristate "Compaq SMART2 support"
-	depends on PCI && VIRT_TO_BUS
+	depends on PCI && VIRT_TO_BUS && 0
 	help
 	  This is the driver for Compaq Smart Array controllers.  Everyone
 	  using these boards should say Y here.  See the file
@@ -319,6 +319,16 @@ config BLK_DEV_NVME
 	  To compile this driver as a module, choose M here: the
 	  module will be called nvme.
 
+config BLK_DEV_SKD
+	tristate "STEC S1120 Block Driver"
+	depends on PCI
+	depends on 64BIT
+	---help---
+	Saying Y or M here will enable support for the
+	STEC, Inc. S1120 PCIe SSD.
+
+	Use device /dev/skd$N amd /dev/skd$Np$M.
+
 config BLK_DEV_OSD
 	tristate "OSD object-as-blkdev support"
 	depends on SCSI_OSD_ULD

drivers/block/Makefile

@@ -23,6 +23,7 @@ obj-$(CONFIG_CDROM_PKTCDVD)	+= pktcdvd.o
 obj-$(CONFIG_MG_DISK)		+= mg_disk.o
 obj-$(CONFIG_SUNVDC)		+= sunvdc.o
 obj-$(CONFIG_BLK_DEV_NVME)	+= nvme.o
+obj-$(CONFIG_BLK_DEV_SKD)	+= skd.o
 obj-$(CONFIG_BLK_DEV_OSD)	+= osdblk.o
 
 obj-$(CONFIG_BLK_DEV_UMEM)	+= umem.o
@@ -44,4 +45,5 @@ obj-$(CONFIG_BLK_DEV_RSXX) += rsxx/
 obj-$(CONFIG_BLK_DEV_NULL_BLK)	+= null_blk.o
 
 nvme-y		:= nvme-core.o nvme-scsi.o
+skd-y		:= skd_main.o
 swim_mod-y	:= swim.o swim_asm.o

drivers/block/cciss.c

@@ -5183,7 +5183,7 @@ static int cciss_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	rebuild_lun_table(h, 1, 0);
 	cciss_engage_scsi(h);
 	h->busy_initializing = 0;
-	return 1;
+	return 0;
 
 clean4:
 	cciss_free_cmd_pool(h);

drivers/block/drbd/drbd_int.h

@@ -1474,7 +1474,8 @@ enum determine_dev_size {
 	DS_ERROR = -1,
 	DS_UNCHANGED = 0,
 	DS_SHRUNK = 1,
-	DS_GREW = 2
+	DS_GREW = 2,
+	DS_GREW_FROM_ZERO = 3,
 };
 extern enum determine_dev_size
 drbd_determine_dev_size(struct drbd_conf *, enum dds_flags, struct resize_parms *) __must_hold(local);

drivers/block/drbd/drbd_main.c

@@ -2750,13 +2750,6 @@ int __init drbd_init(void)
 		return err;
 	}
 
-	err = drbd_genl_register();
-	if (err) {
-		printk(KERN_ERR "drbd: unable to register generic netlink family\n");
-		goto fail;
-	}
-
-
 	register_reboot_notifier(&drbd_notifier);
 
 	/*
@@ -2767,6 +2760,15 @@ int __init drbd_init(void)
 	drbd_proc = NULL; /* play safe for drbd_cleanup */
 	idr_init(&minors);
 
+	rwlock_init(&global_state_lock);
+	INIT_LIST_HEAD(&drbd_tconns);
+
+	err = drbd_genl_register();
+	if (err) {
+		printk(KERN_ERR "drbd: unable to register generic netlink family\n");
+		goto fail;
+	}
+
 	err = drbd_create_mempools();
 	if (err)
 		goto fail;
@@ -2778,9 +2780,6 @@ int __init drbd_init(void)
 		goto fail;
 	}
 
-	rwlock_init(&global_state_lock);
-	INIT_LIST_HEAD(&drbd_tconns);
-
 	retry.wq = create_singlethread_workqueue("drbd-reissue");
 	if (!retry.wq) {
 		printk(KERN_ERR "drbd: unable to create retry workqueue\n");

drivers/block/drbd/drbd_nl.c

@@ -955,7 +955,7 @@ drbd_determine_dev_size(struct drbd_conf *mdev, enum dds_flags flags, struct res
 	}
 
 	if (size > la_size_sect)
-		rv = DS_GREW;
+		rv = la_size_sect ? DS_GREW : DS_GREW_FROM_ZERO;
 	if (size < la_size_sect)
 		rv = DS_SHRUNK;
 
@@ -1132,9 +1132,9 @@ void drbd_reconsider_max_bio_size(struct drbd_conf *mdev)
 	/* We may ignore peer limits if the peer is modern enough.
 	   Because new from 8.3.8 onwards the peer can use multiple
 	   BIOs for a single peer_request */
-	if (mdev->state.conn >= C_CONNECTED) {
+	if (mdev->state.conn >= C_WF_REPORT_PARAMS) {
 		if (mdev->tconn->agreed_pro_version < 94)
-			peer = min( mdev->peer_max_bio_size, DRBD_MAX_SIZE_H80_PACKET);
+			peer = min(mdev->peer_max_bio_size, DRBD_MAX_SIZE_H80_PACKET);
 			/* Correct old drbd (up to 8.3.7) if it believes it can do more than 32KiB */
 		else if (mdev->tconn->agreed_pro_version == 94)
 			peer = DRBD_MAX_SIZE_H80_PACKET;

drivers/block/drbd/drbd_receiver.c

@@ -1890,29 +1890,11 @@ static u32 seq_max(u32 a, u32 b)
 	return seq_greater(a, b) ? a : b;
 }
 
-static bool need_peer_seq(struct drbd_conf *mdev)
-{
-	struct drbd_tconn *tconn = mdev->tconn;
-	int tp;
-
-	/*
-	 * We only need to keep track of the last packet_seq number of our peer
-	 * if we are in dual-primary mode and we have the resolve-conflicts flag set; see
-	 * handle_write_conflicts().
-	 */
-
-	rcu_read_lock();
-	tp = rcu_dereference(mdev->tconn->net_conf)->two_primaries;
-	rcu_read_unlock();
-
-	return tp && test_bit(RESOLVE_CONFLICTS, &tconn->flags);
-}
-
 static void update_peer_seq(struct drbd_conf *mdev, unsigned int peer_seq)
 {
 	unsigned int newest_peer_seq;
 
-	if (need_peer_seq(mdev)) {
+	if (test_bit(RESOLVE_CONFLICTS, &mdev->tconn->flags)) {
 		spin_lock(&mdev->peer_seq_lock);
 		newest_peer_seq = seq_max(mdev->peer_seq, peer_seq);
 		mdev->peer_seq = newest_peer_seq;
@@ -1972,22 +1954,31 @@ static int wait_for_and_update_peer_seq(struct drbd_conf *mdev, const u32 peer_s
 {
 	DEFINE_WAIT(wait);
 	long timeout;
-	int ret;
+	int ret = 0, tp;
 
-	if (!need_peer_seq(mdev))
+	if (!test_bit(RESOLVE_CONFLICTS, &mdev->tconn->flags))
 		return 0;
 
 	spin_lock(&mdev->peer_seq_lock);
 	for (;;) {
 		if (!seq_greater(peer_seq - 1, mdev->peer_seq)) {
 			mdev->peer_seq = seq_max(mdev->peer_seq, peer_seq);
-			ret = 0;
 			break;
 		}
+
 		if (signal_pending(current)) {
 			ret = -ERESTARTSYS;
 			break;
 		}
+
+		rcu_read_lock();
+		tp = rcu_dereference(mdev->tconn->net_conf)->two_primaries;
+		rcu_read_unlock();
+
+		if (!tp)
+			break;
+
+		/* Only need to wait if two_primaries is enabled */
 		prepare_to_wait(&mdev->seq_wait, &wait, TASK_INTERRUPTIBLE);
 		spin_unlock(&mdev->peer_seq_lock);
 		rcu_read_lock();
@@ -2228,8 +2219,10 @@ static int receive_Data(struct drbd_tconn *tconn, struct packet_info *pi)
 			}
 			goto out_interrupted;
 		}
-	} else
+	} else {
+		update_peer_seq(mdev, peer_seq);
 		spin_lock_irq(&mdev->tconn->req_lock);
+	}
 	list_add(&peer_req->w.list, &mdev->active_ee);
 	spin_unlock_irq(&mdev->tconn->req_lock);
 
@@ -4132,7 +4125,11 @@ recv_bm_rle_bits(struct drbd_conf *mdev,
 				(unsigned int)bs.buf_len);
 			return -EIO;
 		}
+		/* if we consumed all 64 bits, assign 0; >> 64 is "undefined"; */
+		if (likely(bits < 64))
 			look_ahead >>= bits;
+		else
+			look_ahead = 0;
 		have -= bits;
 
 		bits = bitstream_get_bits(&bs, &tmp, 64 - have);

drivers/block/drbd/drbd_req.c

@@ -1306,6 +1306,7 @@ int drbd_merge_bvec(struct request_queue *q, struct bvec_merge_data *bvm, struct
 	int backing_limit;
 
 	if (bio_size && get_ldev(mdev)) {
+		unsigned int max_hw_sectors = queue_max_hw_sectors(q);
 		struct request_queue * const b =
 			mdev->ldev->backing_bdev->bd_disk->queue;
 		if (b->merge_bvec_fn) {
@@ -1313,6 +1314,8 @@ int drbd_merge_bvec(struct request_queue *q, struct bvec_merge_data *bvm, struct
 			limit = min(limit, backing_limit);
 		}
 		put_ldev(mdev);
+		if ((limit >> 9) > max_hw_sectors)
+			limit = max_hw_sectors << 9;
 	}
 	return limit;
 }

drivers/block/loop.c

@@ -894,13 +894,6 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
 
 	bio_list_init(&lo->lo_bio_list);
 
-	/*
-	 * set queue make_request_fn, and add limits based on lower level
-	 * device
-	 */
-	blk_queue_make_request(lo->lo_queue, loop_make_request);
-	lo->lo_queue->queuedata = lo;
-
 	if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
 		blk_queue_flush(lo->lo_queue, REQ_FLUSH);
 
@@ -1618,6 +1611,8 @@ static int loop_add(struct loop_device **l, int i)
 	if (!lo)
 		goto out;
 
+	lo->lo_state = Lo_unbound;
+
 	/* allocate id, if @id >= 0, we're requesting that specific id */
 	if (i >= 0) {
 		err = idr_alloc(&loop_index_idr, lo, i, i + 1, GFP_KERNEL);
@@ -1635,6 +1630,12 @@ static int loop_add(struct loop_device **l, int i)
 	if (!lo->lo_queue)
 		goto out_free_idr;
 
+	/*
+	 * set queue make_request_fn
+	 */
+	blk_queue_make_request(lo->lo_queue, loop_make_request);
+	lo->lo_queue->queuedata = lo;
+
 	disk = lo->lo_disk = alloc_disk(1 << part_shift);
 	if (!disk)
 		goto out_free_queue;

drivers/block/mg_disk.c

@@ -936,7 +936,7 @@ static int mg_probe(struct platform_device *plat_dev)
 			goto probe_err_3b;
 		}
 		err = request_irq(host->irq, mg_irq,
-				IRQF_DISABLED | IRQF_TRIGGER_RISING,
+				IRQF_TRIGGER_RISING,
 				MG_DEV_NAME, host);
 		if (err) {
 			printk(KERN_ERR "%s:%d fail (request_irq err=%d)\n",

drivers/block/mtip32xx/mtip32xx.h

@@ -140,6 +140,7 @@ enum {
 	MTIP_PF_SVC_THD_ACTIVE_BIT  = 4,
 	MTIP_PF_ISSUE_CMDS_BIT      = 5,
 	MTIP_PF_REBUILD_BIT         = 6,
+	MTIP_PF_SR_CLEANUP_BIT      = 7,
 	MTIP_PF_SVC_THD_STOP_BIT    = 8,
 
 	/* below are bit numbers in 'dd_flag' defined in driver_data */
@@ -147,15 +148,18 @@ enum {
 	MTIP_DDF_REMOVE_PENDING_BIT = 1,
 	MTIP_DDF_OVER_TEMP_BIT      = 2,
 	MTIP_DDF_WRITE_PROTECT_BIT  = 3,
-	MTIP_DDF_STOP_IO      = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) |
-				(1 << MTIP_DDF_SEC_LOCK_BIT) |
-				(1 << MTIP_DDF_OVER_TEMP_BIT) |
-				(1 << MTIP_DDF_WRITE_PROTECT_BIT)),
-
+	MTIP_DDF_REMOVE_DONE_BIT    = 4,
 	MTIP_DDF_CLEANUP_BIT        = 5,
 	MTIP_DDF_RESUME_BIT         = 6,
 	MTIP_DDF_INIT_DONE_BIT      = 7,
 	MTIP_DDF_REBUILD_FAILED_BIT = 8,
+
+	MTIP_DDF_STOP_IO      = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) |
+				(1 << MTIP_DDF_SEC_LOCK_BIT) |
+				(1 << MTIP_DDF_OVER_TEMP_BIT) |
+				(1 << MTIP_DDF_WRITE_PROTECT_BIT) |
+				(1 << MTIP_DDF_REBUILD_FAILED_BIT)),
+
 };
 
 struct smart_attr {
@@ -499,6 +503,8 @@ struct driver_data {
 
 	bool trim_supp; /* flag indicating trim support */
 
+	bool sr;
+
 	int numa_node; /* NUMA support */
 
 	char workq_name[32];
@@ -511,6 +517,8 @@ struct driver_data {
 
 	int isr_binding;
 
+	struct block_device *bdev;
+
 	int unal_qdepth; /* qdepth of unaligned IO queue */
 
 	struct list_head online_list; /* linkage for online list */

drivers/block/pktcdvd.c

@@ -473,45 +473,31 @@ static void pkt_debugfs_dev_new(struct pktcdvd_device *pd)
 {
 	if (!pkt_debugfs_root)
 		return;
-	pd->dfs_f_info = NULL;
 	pd->dfs_d_root = debugfs_create_dir(pd->name, pkt_debugfs_root);
-	if (IS_ERR(pd->dfs_d_root)) {
-		pd->dfs_d_root = NULL;
+	if (!pd->dfs_d_root)
 		return;
-	}
+
 	pd->dfs_f_info = debugfs_create_file("info", S_IRUGO,
 				pd->dfs_d_root, pd, &debug_fops);
-	if (IS_ERR(pd->dfs_f_info)) {
-		pd->dfs_f_info = NULL;
-		return;
-	}
 }
 
 static void pkt_debugfs_dev_remove(struct pktcdvd_device *pd)
 {
 	if (!pkt_debugfs_root)
 		return;
-	if (pd->dfs_f_info)
 	debugfs_remove(pd->dfs_f_info);
-	pd->dfs_f_info = NULL;
-	if (pd->dfs_d_root)
 	debugfs_remove(pd->dfs_d_root);
+	pd->dfs_f_info = NULL;
 	pd->dfs_d_root = NULL;
 }
 
 static void pkt_debugfs_init(void)
 {
 	pkt_debugfs_root = debugfs_create_dir(DRIVER_NAME, NULL);
-	if (IS_ERR(pkt_debugfs_root)) {
-		pkt_debugfs_root = NULL;
-		return;
-	}
 }
 
 static void pkt_debugfs_cleanup(void)
 {
-	if (!pkt_debugfs_root)
-		return;
 	debugfs_remove(pkt_debugfs_root);
 	pkt_debugfs_root = NULL;
 }

drivers/block/rsxx/core.c

@@ -654,7 +654,8 @@ static void rsxx_eeh_failure(struct pci_dev *dev)
 	for (i = 0; i < card->n_targets; i++) {
 		spin_lock_bh(&card->ctrl[i].queue_lock);
 		cnt = rsxx_cleanup_dma_queue(&card->ctrl[i],
-					     &card->ctrl[i].queue);
+					     &card->ctrl[i].queue,
+					     COMPLETE_DMA);
 		spin_unlock_bh(&card->ctrl[i].queue_lock);
 
 		cnt += rsxx_dma_cancel(&card->ctrl[i]);
@@ -748,10 +749,6 @@ static pci_ers_result_t rsxx_slot_reset(struct pci_dev *dev)
 
 	card->eeh_state = 0;
 
-	st = rsxx_eeh_remap_dmas(card);
-	if (st)
-		goto failed_remap_dmas;
-
 	spin_lock_irqsave(&card->irq_lock, flags);
 	if (card->n_targets & RSXX_MAX_TARGETS)
 		rsxx_enable_ier_and_isr(card, CR_INTR_ALL_G);
@@ -778,7 +775,6 @@ static pci_ers_result_t rsxx_slot_reset(struct pci_dev *dev)
 	return PCI_ERS_RESULT_RECOVERED;
 
 failed_hw_buffers_init:
-failed_remap_dmas:
 	for (i = 0; i < card->n_targets; i++) {
 		if (card->ctrl[i].status.buf)
 			pci_free_consistent(card->dev,

drivers/block/rsxx/dev.c

@@ -295,13 +295,15 @@ int rsxx_setup_dev(struct rsxx_cardinfo *card)
 		return -ENOMEM;
 	}
 
+	if (card->config_valid) {
 		blk_size = card->config.data.block_size;
+		blk_queue_dma_alignment(card->queue, blk_size - 1);
+		blk_queue_logical_block_size(card->queue, blk_size);
+	}
 
 	blk_queue_make_request(card->queue, rsxx_make_request);
 	blk_queue_bounce_limit(card->queue, BLK_BOUNCE_ANY);
-	blk_queue_dma_alignment(card->queue, blk_size - 1);
 	blk_queue_max_hw_sectors(card->queue, blkdev_max_hw_sectors);
-	blk_queue_logical_block_size(card->queue, blk_size);
 	blk_queue_physical_block_size(card->queue, RSXX_HW_BLK_SIZE);
 
 	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, card->queue);

drivers/block/rsxx/dma.c

@@ -221,6 +221,21 @@ static void dma_intr_coal_auto_tune(struct rsxx_cardinfo *card)
 }
 
 /*----------------- RSXX DMA Handling -------------------*/
+static void rsxx_free_dma(struct rsxx_dma_ctrl *ctrl, struct rsxx_dma *dma)
+{
+	if (dma->cmd != HW_CMD_BLK_DISCARD) {
+		if (!pci_dma_mapping_error(ctrl->card->dev, dma->dma_addr)) {
+			pci_unmap_page(ctrl->card->dev, dma->dma_addr,
+				       get_dma_size(dma),
+				       dma->cmd == HW_CMD_BLK_WRITE ?
+						   PCI_DMA_TODEVICE :
+						   PCI_DMA_FROMDEVICE);
+		}
+	}
+
+	kmem_cache_free(rsxx_dma_pool, dma);
+}
+
 static void rsxx_complete_dma(struct rsxx_dma_ctrl *ctrl,
 				  struct rsxx_dma *dma,
 				  unsigned int status)
@@ -232,21 +247,14 @@ static void rsxx_complete_dma(struct rsxx_dma_ctrl *ctrl,
 	if (status & DMA_CANCELLED)
 		ctrl->stats.dma_cancelled++;
 
-	if (dma->dma_addr)
-		pci_unmap_page(ctrl->card->dev, dma->dma_addr,
-			       get_dma_size(dma),
-			       dma->cmd == HW_CMD_BLK_WRITE ?
-					   PCI_DMA_TODEVICE :
-					   PCI_DMA_FROMDEVICE);
-
 	if (dma->cb)
 		dma->cb(ctrl->card, dma->cb_data, status ? 1 : 0);
 
-	kmem_cache_free(rsxx_dma_pool, dma);
+	rsxx_free_dma(ctrl, dma);
 }
 
 int rsxx_cleanup_dma_queue(struct rsxx_dma_ctrl *ctrl,
-			   struct list_head *q)
+			   struct list_head *q, unsigned int done)
 {
 	struct rsxx_dma *dma;
 	struct rsxx_dma *tmp;
@@ -254,7 +262,10 @@ int rsxx_cleanup_dma_queue(struct rsxx_dma_ctrl *ctrl,
 
 	list_for_each_entry_safe(dma, tmp, q, list) {
 		list_del(&dma->list);
+		if (done & COMPLETE_DMA)
 			rsxx_complete_dma(ctrl, dma, DMA_CANCELLED);
+		else
+			rsxx_free_dma(ctrl, dma);
 		cnt++;
 	}
 
@@ -370,7 +381,7 @@ static void dma_engine_stalled(unsigned long data)
 
 		/* Clean up the DMA queue */
 		spin_lock(&ctrl->queue_lock);
-		cnt = rsxx_cleanup_dma_queue(ctrl, &ctrl->queue);
+		cnt = rsxx_cleanup_dma_queue(ctrl, &ctrl->queue, COMPLETE_DMA);
 		spin_unlock(&ctrl->queue_lock);
 
 		cnt += rsxx_dma_cancel(ctrl);
@@ -388,6 +399,7 @@ static void rsxx_issue_dmas(struct rsxx_dma_ctrl *ctrl)
 	int tag;
 	int cmds_pending = 0;
 	struct hw_cmd *hw_cmd_buf;
+	int dir;
 
 	hw_cmd_buf = ctrl->cmd.buf;
 
@@ -424,6 +436,31 @@ static void rsxx_issue_dmas(struct rsxx_dma_ctrl *ctrl)
 			continue;
 		}
 
+		if (dma->cmd != HW_CMD_BLK_DISCARD) {
+			if (dma->cmd == HW_CMD_BLK_WRITE)
+				dir = PCI_DMA_TODEVICE;
+			else
+				dir = PCI_DMA_FROMDEVICE;
+
+			/*
+			 * The function pci_map_page is placed here because we
+			 * can only, by design, issue up to 255 commands to the
+			 * hardware at one time per DMA channel. So the maximum
+			 * amount of mapped memory would be 255 * 4 channels *
+			 * 4096 Bytes which is less than 2GB, the limit of a x8
+			 * Non-HWWD PCIe slot. This way the pci_map_page
+			 * function should never fail because of a lack of
+			 * mappable memory.
+			 */
+			dma->dma_addr = pci_map_page(ctrl->card->dev, dma->page,
+					dma->pg_off, dma->sub_page.cnt << 9, dir);
+			if (pci_dma_mapping_error(ctrl->card->dev, dma->dma_addr)) {
+				push_tracker(ctrl->trackers, tag);
+				rsxx_complete_dma(ctrl, dma, DMA_CANCELLED);
+				continue;
+			}
+		}
+
 		set_tracker_dma(ctrl->trackers, tag, dma);
 		hw_cmd_buf[ctrl->cmd.idx].command  = dma->cmd;
 		hw_cmd_buf[ctrl->cmd.idx].tag      = tag;
@@ -620,14 +657,6 @@ static int rsxx_queue_dma(struct rsxx_cardinfo *card,
 	if (!dma)
 		return -ENOMEM;
 
-	dma->dma_addr = pci_map_page(card->dev, page, pg_off, dma_len,
-				     dir ? PCI_DMA_TODEVICE :
-				     PCI_DMA_FROMDEVICE);
-	if (!dma->dma_addr) {
-		kmem_cache_free(rsxx_dma_pool, dma);
-		return -ENOMEM;
-	}
-
 	dma->cmd          = dir ? HW_CMD_BLK_WRITE : HW_CMD_BLK_READ;
 	dma->laddr        = laddr;
 	dma->sub_page.off = (dma_off >> 9);
@@ -736,11 +765,9 @@ int rsxx_dma_queue_bio(struct rsxx_cardinfo *card,
 	return 0;
 
 bvec_err:
-	for (i = 0; i < card->n_targets; i++) {
-		spin_lock_bh(&card->ctrl[i].queue_lock);
-		rsxx_cleanup_dma_queue(&card->ctrl[i], &dma_list[i]);
-		spin_unlock_bh(&card->ctrl[i].queue_lock);
-	}
+	for (i = 0; i < card->n_targets; i++)
+		rsxx_cleanup_dma_queue(&card->ctrl[i], &dma_list[i],
+					FREE_DMA);
 
 	return st;
 }
@@ -990,7 +1017,7 @@ void rsxx_dma_destroy(struct rsxx_cardinfo *card)
 
 		/* Clean up the DMA queue */
 		spin_lock_bh(&ctrl->queue_lock);
-		rsxx_cleanup_dma_queue(ctrl, &ctrl->queue);
+		rsxx_cleanup_dma_queue(ctrl, &ctrl->queue, COMPLETE_DMA);
 		spin_unlock_bh(&ctrl->queue_lock);
 
 		rsxx_dma_cancel(ctrl);
@@ -1032,6 +1059,14 @@ int rsxx_eeh_save_issued_dmas(struct rsxx_cardinfo *card)
 			else
 				card->ctrl[i].stats.reads_issued--;
 
+			if (dma->cmd != HW_CMD_BLK_DISCARD) {
+				pci_unmap_page(card->dev, dma->dma_addr,
+					       get_dma_size(dma),
+					       dma->cmd == HW_CMD_BLK_WRITE ?
+					       PCI_DMA_TODEVICE :
+					       PCI_DMA_FROMDEVICE);
+			}
+
 			list_add_tail(&dma->list, &issued_dmas[i]);
 			push_tracker(card->ctrl[i].trackers, j);
 			cnt++;
@@ -1043,15 +1078,6 @@ int rsxx_eeh_save_issued_dmas(struct rsxx_cardinfo *card)
 		atomic_sub(cnt, &card->ctrl[i].stats.hw_q_depth);
 		card->ctrl[i].stats.sw_q_depth += cnt;
 		card->ctrl[i].e_cnt = 0;
-
-		list_for_each_entry(dma, &card->ctrl[i].queue, list) {
-			if (dma->dma_addr)
-				pci_unmap_page(card->dev, dma->dma_addr,
-					       get_dma_size(dma),
-					       dma->cmd == HW_CMD_BLK_WRITE ?
-					       PCI_DMA_TODEVICE :
-					       PCI_DMA_FROMDEVICE);
-		}
 		spin_unlock_bh(&card->ctrl[i].queue_lock);
 	}
 
@@ -1060,31 +1086,6 @@ int rsxx_eeh_save_issued_dmas(struct rsxx_cardinfo *card)
 	return 0;
 }
 
-int rsxx_eeh_remap_dmas(struct rsxx_cardinfo *card)
-{
-	struct rsxx_dma *dma;
-	int i;
-
-	for (i = 0; i < card->n_targets; i++) {
-		spin_lock_bh(&card->ctrl[i].queue_lock);
-		list_for_each_entry(dma, &card->ctrl[i].queue, list) {
-			dma->dma_addr = pci_map_page(card->dev, dma->page,
-					dma->pg_off, get_dma_size(dma),
-					dma->cmd == HW_CMD_BLK_WRITE ?
-					PCI_DMA_TODEVICE :
-					PCI_DMA_FROMDEVICE);
-			if (!dma->dma_addr) {
-				spin_unlock_bh(&card->ctrl[i].queue_lock);
-				kmem_cache_free(rsxx_dma_pool, dma);
-				return -ENOMEM;
-			}
-		}
-		spin_unlock_bh(&card->ctrl[i].queue_lock);
-	}
-
-	return 0;
-}
-
 int rsxx_dma_init(void)
 {
 	rsxx_dma_pool = KMEM_CACHE(rsxx_dma, SLAB_HWCACHE_ALIGN);

drivers/block/rsxx/rsxx_priv.h

@@ -52,7 +52,7 @@ struct proc_cmd;
 #define RS70_PCI_REV_SUPPORTED	4
 
 #define DRIVER_NAME "rsxx"
-#define DRIVER_VERSION "4.0"
+#define DRIVER_VERSION "4.0.3.2516"
 
 /* Block size is 4096 */
 #define RSXX_HW_BLK_SHIFT		12
@@ -345,6 +345,11 @@ enum rsxx_creg_stat {
 	CREG_STAT_TAG_MASK	= 0x0000ff00,
 };
 
+enum rsxx_dma_finish {
+	FREE_DMA	= 0x0,
+	COMPLETE_DMA	= 0x1,
+};
+
 static inline unsigned int CREG_DATA(int N)
 {
 	return CREG_DATA0 + (N << 2);
@@ -379,7 +384,9 @@ typedef void (*rsxx_dma_cb)(struct rsxx_cardinfo *card,
 int rsxx_dma_setup(struct rsxx_cardinfo *card);
 void rsxx_dma_destroy(struct rsxx_cardinfo *card);
 int rsxx_dma_init(void);
-int rsxx_cleanup_dma_queue(struct rsxx_dma_ctrl *ctrl, struct list_head *q);
+int rsxx_cleanup_dma_queue(struct rsxx_dma_ctrl *ctrl,
+				struct list_head *q,
+				unsigned int done);
 int rsxx_dma_cancel(struct rsxx_dma_ctrl *ctrl);
 void rsxx_dma_cleanup(void);
 void rsxx_dma_queue_reset(struct rsxx_cardinfo *card);

drivers/block/skd_s1120.h

+/* Copyright 2012 STEC, Inc.
+ *
+ * This file is licensed under the terms of the 3-clause
+ * BSD License (http://opensource.org/licenses/BSD-3-Clause)
+ * or the GNU GPL-2.0 (http://www.gnu.org/licenses/gpl-2.0.html),
+ * at your option. Both licenses are also available in the LICENSE file
+ * distributed with this project. This file may not be copied, modified,
+ * or distributed except in accordance with those terms.
+ */
+
+
+#ifndef SKD_S1120_H
+#define SKD_S1120_H
+
+#pragma pack(push, s1120_h, 1)
+
+/*
+ * Q-channel, 64-bit r/w
+ */
+#define FIT_Q_COMMAND			0x400u
+#define FIT_QCMD_QID_MASK		(0x3 << 1)
+#define  FIT_QCMD_QID0			(0x0 << 1)
+#define  FIT_QCMD_QID_NORMAL		FIT_QCMD_QID0
+#define  FIT_QCMD_QID1			(0x1 << 1)
+#define  FIT_QCMD_QID2			(0x2 << 1)
+#define  FIT_QCMD_QID3			(0x3 << 1)
+#define  FIT_QCMD_FLUSH_QUEUE		(0ull)	/* add QID */
+#define  FIT_QCMD_MSGSIZE_MASK		(0x3 << 4)
+#define  FIT_QCMD_MSGSIZE_64		(0x0 << 4)
+#define  FIT_QCMD_MSGSIZE_128		(0x1 << 4)
+#define  FIT_QCMD_MSGSIZE_256		(0x2 << 4)
+#define  FIT_QCMD_MSGSIZE_512		(0x3 << 4)
+#define  FIT_QCMD_BASE_ADDRESS_MASK	(0xFFFFFFFFFFFFFFC0ull)
+
+/*
+ * Control, 32-bit r/w
+ */
+#define FIT_CONTROL			0x500u
+#define  FIT_CR_HARD_RESET		(1u << 0u)
+#define  FIT_CR_SOFT_RESET		(1u << 1u)
+#define  FIT_CR_DIS_TIMESTAMPS		(1u << 6u)
+#define  FIT_CR_ENABLE_INTERRUPTS	(1u << 7u)
+
+/*
+ * Status, 32-bit, r/o
+ */
+#define FIT_STATUS			0x510u
+#define FIT_SR_DRIVE_STATE_MASK		0x000000FFu
+#define	FIT_SR_SIGNATURE		(0xFF << 8)
+#define	FIT_SR_PIO_DMA			(1 << 16)
+#define FIT_SR_DRIVE_OFFLINE		0x00
+#define FIT_SR_DRIVE_INIT		0x01
+/* #define FIT_SR_DRIVE_READY		0x02 */
+#define FIT_SR_DRIVE_ONLINE		0x03
+#define FIT_SR_DRIVE_BUSY		0x04
+#define FIT_SR_DRIVE_FAULT		0x05
+#define FIT_SR_DRIVE_DEGRADED		0x06
+#define FIT_SR_PCIE_LINK_DOWN		0x07
+#define FIT_SR_DRIVE_SOFT_RESET		0x08
+#define FIT_SR_DRIVE_INIT_FAULT		0x09
+#define FIT_SR_DRIVE_BUSY_SANITIZE	0x0A
+#define FIT_SR_DRIVE_BUSY_ERASE		0x0B
+#define FIT_SR_DRIVE_FW_BOOTING		0x0C
+#define FIT_SR_DRIVE_NEED_FW_DOWNLOAD	0xFE
+#define FIT_SR_DEVICE_MISSING		0xFF
+#define FIT_SR__RESERVED		0xFFFFFF00u
+
+/*
+ * FIT_STATUS - Status register data definition
+ */
+#define FIT_SR_STATE_MASK		(0xFF << 0)
+#define FIT_SR_SIGNATURE		(0xFF << 8)
+#define FIT_SR_PIO_DMA			(1 << 16)
+
+/*
+ * Interrupt status, 32-bit r/w1c (w1c ==> write 1 to clear)
+ */
+#define FIT_INT_STATUS_HOST		0x520u
+#define  FIT_ISH_FW_STATE_CHANGE	(1u << 0u)
+#define  FIT_ISH_COMPLETION_POSTED	(1u << 1u)
+#define  FIT_ISH_MSG_FROM_DEV		(1u << 2u)
+#define  FIT_ISH_UNDEFINED_3		(1u << 3u)
+#define  FIT_ISH_UNDEFINED_4		(1u << 4u)
+#define  FIT_ISH_Q0_FULL		(1u << 5u)
+#define  FIT_ISH_Q1_FULL		(1u << 6u)
+#define  FIT_ISH_Q2_FULL		(1u << 7u)
+#define  FIT_ISH_Q3_FULL		(1u << 8u)
+#define  FIT_ISH_QCMD_FIFO_OVERRUN	(1u << 9u)
+#define  FIT_ISH_BAD_EXP_ROM_READ	(1u << 10u)
+
+#define FIT_INT_DEF_MASK \
+	(FIT_ISH_FW_STATE_CHANGE | \
+	 FIT_ISH_COMPLETION_POSTED | \
+	 FIT_ISH_MSG_FROM_DEV | \
+	 FIT_ISH_Q0_FULL | \
+	 FIT_ISH_Q1_FULL | \
+	 FIT_ISH_Q2_FULL | \
+	 FIT_ISH_Q3_FULL | \
+	 FIT_ISH_QCMD_FIFO_OVERRUN | \
+	 FIT_ISH_BAD_EXP_ROM_READ)
+
+#define FIT_INT_QUEUE_FULL \
+	(FIT_ISH_Q0_FULL | \
+	 FIT_ISH_Q1_FULL | \
+	 FIT_ISH_Q2_FULL | \
+	 FIT_ISH_Q3_FULL)
+
+#define MSI_MSG_NWL_ERROR_0		0x00000000
+#define MSI_MSG_NWL_ERROR_1		0x00000001
+#define MSI_MSG_NWL_ERROR_2		0x00000002
+#define MSI_MSG_NWL_ERROR_3		0x00000003
+#define MSI_MSG_STATE_CHANGE		0x00000004
+#define MSI_MSG_COMPLETION_POSTED	0x00000005
+#define MSI_MSG_MSG_FROM_DEV		0x00000006
+#define MSI_MSG_RESERVED_0		0x00000007
+#define MSI_MSG_RESERVED_1		0x00000008
+#define MSI_MSG_QUEUE_0_FULL		0x00000009
+#define MSI_MSG_QUEUE_1_FULL		0x0000000A
+#define MSI_MSG_QUEUE_2_FULL		0x0000000B
+#define MSI_MSG_QUEUE_3_FULL		0x0000000C
+
+#define FIT_INT_RESERVED_MASK \
+	(FIT_ISH_UNDEFINED_3 | \
+	 FIT_ISH_UNDEFINED_4)
+
+/*
+ * Interrupt mask, 32-bit r/w
+ * Bit definitions are the same as FIT_INT_STATUS_HOST
+ */
+#define FIT_INT_MASK_HOST		0x528u
+
+/*
+ * Message to device, 32-bit r/w
+ */
+#define FIT_MSG_TO_DEVICE		0x540u
+
+/*
+ * Message from device, 32-bit, r/o
+ */
+#define FIT_MSG_FROM_DEVICE		0x548u
+
+/*
+ * 32-bit messages to/from device, composition/extraction macros
+ */
+#define FIT_MXD_CONS(TYPE, PARAM, DATA) \
+	((((TYPE)  & 0xFFu) << 24u) | \
+	(((PARAM) & 0xFFu) << 16u) | \
+	(((DATA)  & 0xFFFFu) << 0u))
+#define FIT_MXD_TYPE(MXD)		(((MXD) >> 24u) & 0xFFu)
+#define FIT_MXD_PARAM(MXD)		(((MXD) >> 16u) & 0xFFu)
+#define FIT_MXD_DATA(MXD)		(((MXD) >> 0u) & 0xFFFFu)
+
+/*
+ * Types of messages to/from device
+ */
+#define FIT_MTD_FITFW_INIT		0x01u
+#define FIT_MTD_GET_CMDQ_DEPTH		0x02u
+#define FIT_MTD_SET_COMPQ_DEPTH		0x03u
+#define FIT_MTD_SET_COMPQ_ADDR		0x04u
+#define FIT_MTD_ARM_QUEUE		0x05u
+#define FIT_MTD_CMD_LOG_HOST_ID		0x07u
+#define FIT_MTD_CMD_LOG_TIME_STAMP_LO	0x08u
+#define FIT_MTD_CMD_LOG_TIME_STAMP_HI	0x09u
+#define FIT_MFD_SMART_EXCEEDED		0x10u
+#define FIT_MFD_POWER_DOWN		0x11u
+#define FIT_MFD_OFFLINE			0x12u
+#define FIT_MFD_ONLINE			0x13u
+#define FIT_MFD_FW_RESTARTING		0x14u
+#define FIT_MFD_PM_ACTIVE		0x15u
+#define FIT_MFD_PM_STANDBY		0x16u
+#define FIT_MFD_PM_SLEEP		0x17u
+#define FIT_MFD_CMD_PROGRESS		0x18u
+
+#define FIT_MTD_DEBUG			0xFEu
+#define FIT_MFD_DEBUG			0xFFu
+
+#define FIT_MFD_MASK			(0xFFu)
+#define FIT_MFD_DATA_MASK		(0xFFu)
+#define FIT_MFD_MSG(x)			(((x) >> 24) & FIT_MFD_MASK)
+#define FIT_MFD_DATA(x)			((x) & FIT_MFD_MASK)
+
+/*
+ * Extra arg to FIT_MSG_TO_DEVICE, 64-bit r/w
+ * Used to set completion queue address (FIT_MTD_SET_COMPQ_ADDR)
+ * (was Response buffer in docs)
+ */
+#define FIT_MSG_TO_DEVICE_ARG		0x580u
+
+/*
+ * Hardware (ASIC) version, 32-bit r/o
+ */
+#define FIT_HW_VERSION			0x588u
+
+/*
+ * Scatter/gather list descriptor.
+ * 32-bytes and must be aligned on a 32-byte boundary.
+ * All fields are in little endian order.
+ */
+struct fit_sg_descriptor {
+	uint32_t control;
+	uint32_t byte_count;
+	uint64_t host_side_addr;
+	uint64_t dev_side_addr;
+	uint64_t next_desc_ptr;
+};
+
+#define FIT_SGD_CONTROL_NOT_LAST	0x000u
+#define FIT_SGD_CONTROL_LAST		0x40Eu
+
+/*
+ * Header at the beginning of a FIT message. The header
+ * is followed by SSDI requests each 64 bytes.
+ * A FIT message can be up to 512 bytes long and must start
+ * on a 64-byte boundary.
+ */
+struct fit_msg_hdr {
+	uint8_t protocol_id;
+	uint8_t num_protocol_cmds_coalesced;
+	uint8_t _reserved[62];
+};
+
+#define FIT_PROTOCOL_ID_FIT	1
+#define FIT_PROTOCOL_ID_SSDI	2
+#define FIT_PROTOCOL_ID_SOFIT	3
+
+
+#define FIT_PROTOCOL_MINOR_VER(mtd_val) ((mtd_val >> 16) & 0xF)
+#define FIT_PROTOCOL_MAJOR_VER(mtd_val) ((mtd_val >> 20) & 0xF)
+
+/*
+ * Format of a completion entry. The completion queue is circular
+ * and must have at least as many entries as the maximum number
+ * of commands that may be issued to the device.
+ *
+ * There are no head/tail pointers. The cycle value is used to
+ * infer the presence of new completion records.
+ * Initially the cycle in all entries is 0, the index is 0, and
+ * the cycle value to expect is 1. When completions are added
+ * their cycle values are set to 1. When the index wraps the
+ * cycle value to expect is incremented.
+ *
+ * Command_context is opaque and taken verbatim from the SSDI command.
+ * All other fields are big endian.
+ */
+#define FIT_PROTOCOL_VERSION_0		0
+
+/*
+ *  Protocol major version 1 completion entry.
+ *  The major protocol version is found in bits
+ *  20-23 of the FIT_MTD_FITFW_INIT response.
+ */
+struct fit_completion_entry_v1 {
+	uint32_t	num_returned_bytes;
+	uint16_t	tag;
+	uint8_t		status;  /* SCSI status */
+	uint8_t		cycle;
+};
+#define FIT_PROTOCOL_VERSION_1		1
+#define FIT_PROTOCOL_VERSION_CURRENT	FIT_PROTOCOL_VERSION_1
+
+struct fit_comp_error_info {
+	uint8_t		type:7; /* 00: Bits0-6 indicates the type of sense data. */
+	uint8_t		valid:1; /* 00: Bit 7 := 1 ==> info field is valid. */
+	uint8_t		reserved0; /* 01: Obsolete field */
+	uint8_t		key:4; /* 02: Bits0-3 indicate the sense key. */
+	uint8_t		reserved2:1; /* 02: Reserved bit. */
+	uint8_t		bad_length:1; /* 02: Incorrect Length Indicator */
+	uint8_t		end_medium:1; /* 02: End of Medium */
+	uint8_t		file_mark:1; /* 02: Filemark */
+	uint8_t		info[4]; /* 03: */
+	uint8_t		reserved1; /* 07: Additional Sense Length */
+	uint8_t		cmd_spec[4]; /* 08: Command Specific Information */
+	uint8_t		code; /* 0C: Additional Sense Code */
+	uint8_t		qual; /* 0D: Additional Sense Code Qualifier */
+	uint8_t		fruc; /* 0E: Field Replaceable Unit Code */
+	uint8_t		sks_high:7; /* 0F: Sense Key Specific (MSB) */
+	uint8_t		sks_valid:1; /* 0F: Sense Key Specific Valid */
+	uint16_t	sks_low; /* 10: Sense Key Specific (LSW) */
+	uint16_t	reserved3; /* 12: Part of additional sense bytes (unused) */
+	uint16_t	uec; /* 14: Additional Sense Bytes */
+	uint64_t	per; /* 16: Additional Sense Bytes */
+	uint8_t		reserved4[2]; /* 1E: Additional Sense Bytes (unused) */
+};
+
+
+/* Task management constants */
+#define SOFT_TASK_SIMPLE		0x00
+#define SOFT_TASK_HEAD_OF_QUEUE		0x01
+#define SOFT_TASK_ORDERED		0x02
+
+/* Version zero has the last 32 bits reserved,
+ * Version one has the last 32 bits sg_list_len_bytes;
+ */
+struct skd_command_header {
+	uint64_t	sg_list_dma_address;
+	uint16_t	tag;
+	uint8_t		attribute;
+	uint8_t		add_cdb_len;     /* In 32 bit words */
+	uint32_t	sg_list_len_bytes;
+};
+
+struct skd_scsi_request {
+	struct		skd_command_header hdr;
+	unsigned char	cdb[16];
+/*	unsigned char _reserved[16]; */
+};
+
+struct driver_inquiry_data {
+	uint8_t		peripheral_device_type:5;
+	uint8_t		qualifier:3;
+	uint8_t		page_code;
+	uint16_t	page_length;
+	uint16_t	pcie_bus_number;
+	uint8_t		pcie_device_number;
+	uint8_t		pcie_function_number;
+	uint8_t		pcie_link_speed;
+	uint8_t		pcie_link_lanes;
+	uint16_t	pcie_vendor_id;
+	uint16_t	pcie_device_id;
+	uint16_t	pcie_subsystem_vendor_id;
+	uint16_t	pcie_subsystem_device_id;
+	uint8_t		reserved1[2];
+	uint8_t		reserved2[3];
+	uint8_t		driver_version_length;
+	uint8_t		driver_version[0x14];
+};
+
+#pragma pack(pop, s1120_h)
+
+#endif /* SKD_S1120_H */

drivers/block/xen-blkback/blkback.c

@@ -887,6 +887,8 @@ static int dispatch_discard_io(struct xen_blkif *blkif,
 	unsigned long secure;
 	struct phys_req preq;
 
+	xen_blkif_get(blkif);
+
 	preq.sector_number = req->u.discard.sector_number;
 	preq.nr_sects      = req->u.discard.nr_sectors;
 
@@ -899,7 +901,6 @@ static int dispatch_discard_io(struct xen_blkif *blkif,
 	}
 	blkif->st_ds_req++;
 
-	xen_blkif_get(blkif);
 	secure = (blkif->vbd.discard_secure &&
 		 (req->u.discard.flag & BLKIF_DISCARD_SECURE)) ?
 		 BLKDEV_DISCARD_SECURE : 0;

drivers/s390/block/dasd.c

@@ -2979,12 +2979,12 @@ static int dasd_alloc_queue(struct dasd_block *block)
 
 	elevator_exit(block->request_queue->elevator);
 	block->request_queue->elevator = NULL;
+	mutex_lock(&block->request_queue->sysfs_lock);
 	rc = elevator_init(block->request_queue, "deadline");
-	if (rc) {
+	if (rc)
 		blk_cleanup_queue(block->request_queue);
+	mutex_unlock(&block->request_queue->sysfs_lock);
 	return rc;
-	}
-	return 0;
 }
 
 /*