eth: remove copies of the NAPI_POLL_WEIGHT define

Defining local versions of NAPI_POLL_WEIGHT with the same
values in the drivers just makes refactoring harder.

Drop the special defines in a bunch of drivers where the
removal is relatively simple so grouping into one patch
does not impact reviewability.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/cortina/gemini.c

@@ -68,7 +68,6 @@ MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 #define DEFAULT_GMAC_RXQ_ORDER		9
 #define DEFAULT_GMAC_TXQ_ORDER		8
 #define DEFAULT_RX_BUF_ORDER		11
-#define DEFAULT_NAPI_WEIGHT		64
 #define TX_MAX_FRAGS			16
 #define TX_QUEUE_NUM			1	/* max: 6 */
 #define RX_MAX_ALLOC_ORDER		2
@@ -2472,8 +2471,7 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
 	netdev->max_mtu = 10236 - VLAN_ETH_HLEN;
 
 	port->freeq_refill = 0;
-	netif_napi_add(netdev, &port->napi, gmac_napi_poll,
-		       DEFAULT_NAPI_WEIGHT);
+	netif_napi_add(netdev, &port->napi, gmac_napi_poll, NAPI_POLL_WEIGHT);
 
 	ret = of_get_mac_address(np, mac);
 	if (!ret) {

drivers/net/ethernet/marvell/skge.c

@@ -50,7 +50,6 @@
 #define PHY_RETRIES	        1000
 #define ETH_JUMBO_MTU		9000
 #define TX_WATCHDOG		(5 * HZ)
-#define NAPI_WEIGHT		64
 #define BLINK_MS		250
 #define LINK_HZ			HZ
 
@@ -3833,7 +3832,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
 		dev->features |= NETIF_F_HIGHDMA;
 
 	skge = netdev_priv(dev);
-	netif_napi_add(dev, &skge->napi, skge_poll, NAPI_WEIGHT);
+	netif_napi_add(dev, &skge->napi, skge_poll, NAPI_POLL_WEIGHT);
 	skge->netdev = dev;
 	skge->hw = hw;
 	skge->msg_enable = netif_msg_init(debug, default_msg);

drivers/net/ethernet/marvell/sky2.c

@@ -63,7 +63,6 @@
 #define TX_DEF_PENDING		63
 
 #define TX_WATCHDOG		(5 * HZ)
-#define NAPI_WEIGHT		64
 #define PHY_RETRIES		1000
 
 #define SKY2_EEPROM_MAGIC	0x9955aabb
@@ -4938,7 +4937,7 @@ static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
-	netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
+	netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_POLL_WEIGHT);
 
 	err = register_netdev(dev);
 	if (err) {

drivers/net/ethernet/mediatek/mtk_star_emac.c

@@ -30,7 +30,6 @@
 #define MTK_STAR_WAIT_TIMEOUT			300
 #define MTK_STAR_MAX_FRAME_SIZE			1514
 #define MTK_STAR_SKB_ALIGNMENT			16
-#define MTK_STAR_NAPI_WEIGHT			64
 #define MTK_STAR_HASHTABLE_MC_LIMIT		256
 #define MTK_STAR_HASHTABLE_SIZE_MAX		512
 
@@ -1551,7 +1550,7 @@ static int mtk_star_probe(struct platform_device *pdev)
 	ndev->netdev_ops = &mtk_star_netdev_ops;
 	ndev->ethtool_ops = &mtk_star_ethtool_ops;
 
-	netif_napi_add(ndev, &priv->napi, mtk_star_poll, MTK_STAR_NAPI_WEIGHT);
+	netif_napi_add(ndev, &priv->napi, mtk_star_poll, NAPI_POLL_WEIGHT);
 
 	return devm_register_netdev(dev, ndev);
 }

drivers/net/ethernet/ti/davinci_emac.c

@@ -113,7 +113,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 #define EMAC_DEF_RX_NUM_DESC		(128)
 #define EMAC_DEF_MAX_TX_CH		(1) /* Max TX channels configured */
 #define EMAC_DEF_MAX_RX_CH		(1) /* Max RX channels configured */
-#define EMAC_POLL_WEIGHT		(64) /* Default NAPI poll weight */
 
 /* Buffer descriptor parameters */
 #define EMAC_DEF_TX_MAX_SERVICE		(32) /* TX max service BD's */
@@ -1949,7 +1948,7 @@ static int davinci_emac_probe(struct platform_device *pdev)
 
 	ndev->netdev_ops = &emac_netdev_ops;
 	ndev->ethtool_ops = &ethtool_ops;
-	netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
+	netif_napi_add(ndev, &priv->napi, emac_poll, NAPI_POLL_WEIGHT);
 
 	pm_runtime_enable(&pdev->dev);
 	rc = pm_runtime_resume_and_get(&pdev->dev);

drivers/net/ethernet/ti/netcp_core.c

@@ -24,7 +24,6 @@
 #include "netcp.h"
 
 #define NETCP_SOP_OFFSET	(NET_IP_ALIGN + NET_SKB_PAD)
-#define NETCP_NAPI_WEIGHT	64
 #define NETCP_TX_TIMEOUT	(5 * HZ)
 #define NETCP_PACKET_SIZE	(ETH_FRAME_LEN + ETH_FCS_LEN)
 #define NETCP_MIN_PACKET_SIZE	ETH_ZLEN
@@ -2096,8 +2095,8 @@ static int netcp_create_interface(struct netcp_device *netcp_device,
 	}
 
 	/* NAPI register */
-	netif_napi_add(ndev, &netcp->rx_napi, netcp_rx_poll, NETCP_NAPI_WEIGHT);
-	netif_tx_napi_add(ndev, &netcp->tx_napi, netcp_tx_poll, NETCP_NAPI_WEIGHT);
+	netif_napi_add(ndev, &netcp->rx_napi, netcp_rx_poll, NAPI_POLL_WEIGHT);
+	netif_tx_napi_add(ndev, &netcp->tx_napi, netcp_tx_poll, NAPI_POLL_WEIGHT);
 
 	/* Register the network device */
 	ndev->dev_id		= 0;

drivers/net/xen-netback/interface.c

@@ -42,7 +42,6 @@
 #include <xen/balloon.h>
 
 #define XENVIF_QUEUE_LENGTH 32
-#define XENVIF_NAPI_WEIGHT  64
 
 /* Number of bytes allowed on the internal guest Rx queue. */
 #define XENVIF_RX_QUEUE_BYTES (XEN_NETIF_RX_RING_SIZE/2 * PAGE_SIZE)
@@ -739,7 +738,7 @@ int xenvif_connect_data(struct xenvif_queue *queue,
 	atomic_set(&queue->inflight_packets, 0);
 
 	netif_napi_add(queue->vif->dev, &queue->napi, xenvif_poll,
-			XENVIF_NAPI_WEIGHT);
+			NAPI_POLL_WEIGHT);
 
 	queue->stalled = true;