Commit 605cafbe authored by Osamu Tomita's avatar Osamu Tomita Committed by Jeff Garzik

[PATCH] Support PC-9800 subarchitecture (9/14) NIC

This is the patch to support NEC PC-9800 subarchitecture
against 2.5.65-ac1. (9/14)

C-bus(PC98's legacy bus like ISA) network cards support.
Change IO port and IRQ assign.
Add NE2000 compatible driver for PC-9800.
  PCI netwwork card works fine without patch.

Regards,
Osamu Tomita
parent b65f28be
...@@ -56,6 +56,10 @@ ...@@ -56,6 +56,10 @@
v1.19b 08Nov2002 Marc Zyngier <maz@wild-wind.fr.eu.org> v1.19b 08Nov2002 Marc Zyngier <maz@wild-wind.fr.eu.org>
- Introduce driver model for EISA cards. - Introduce driver model for EISA cards.
*/ */
/*
FIXES for PC-9800:
Shu Iwanaga: 3c569B(PC-9801 C-bus) support
*/
#define DRV_NAME "3c509" #define DRV_NAME "3c509"
#define DRV_VERSION "1.19b" #define DRV_VERSION "1.19b"
...@@ -257,7 +261,7 @@ static struct mca_driver el3_mca_driver = { ...@@ -257,7 +261,7 @@ static struct mca_driver el3_mca_driver = {
}; };
#endif /* CONFIG_MCA */ #endif /* CONFIG_MCA */
#ifdef __ISAPNP__ #if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
static struct isapnp_device_id el3_isapnp_adapters[] __initdata = { static struct isapnp_device_id el3_isapnp_adapters[] __initdata = {
{ ISAPNP_ANY_ID, ISAPNP_ANY_ID, { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5090), ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5090),
...@@ -350,7 +354,7 @@ static void el3_common_remove (struct net_device *dev) ...@@ -350,7 +354,7 @@ static void el3_common_remove (struct net_device *dev)
if (lp->pmdev) if (lp->pmdev)
pm_unregister(lp->pmdev); pm_unregister(lp->pmdev);
#endif #endif
#ifdef __ISAPNP__ #if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
if (lp->type == EL3_PNP) if (lp->type == EL3_PNP)
pnp_device_detach(to_pnp_dev(lp->dev)); pnp_device_detach(to_pnp_dev(lp->dev));
#endif #endif
...@@ -368,12 +372,12 @@ static int __init el3_probe(int card_idx) ...@@ -368,12 +372,12 @@ static int __init el3_probe(int card_idx)
int ioaddr, irq, if_port; int ioaddr, irq, if_port;
u16 phys_addr[3]; u16 phys_addr[3];
static int current_tag; static int current_tag;
#ifdef __ISAPNP__ #if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
static int pnp_cards; static int pnp_cards;
struct pnp_dev *idev = NULL; struct pnp_dev *idev = NULL;
#endif /* __ISAPNP__ */ #endif /* __ISAPNP__ */
#ifdef __ISAPNP__ #if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
if (nopnp == 1) if (nopnp == 1)
goto no_pnp; goto no_pnp;
...@@ -421,6 +425,9 @@ static int __init el3_probe(int card_idx) ...@@ -421,6 +425,9 @@ static int __init el3_probe(int card_idx)
no_pnp: no_pnp:
#endif /* __ISAPNP__ */ #endif /* __ISAPNP__ */
#ifdef CONFIG_X86_PC9800
id_port = 0x71d0;
#else
/* Select an open I/O location at 0x1*0 to do contention select. */ /* Select an open I/O location at 0x1*0 to do contention select. */
for ( ; id_port < 0x200; id_port += 0x10) { for ( ; id_port < 0x200; id_port += 0x10) {
if (check_region(id_port, 1)) if (check_region(id_port, 1))
...@@ -435,6 +442,7 @@ static int __init el3_probe(int card_idx) ...@@ -435,6 +442,7 @@ static int __init el3_probe(int card_idx)
printk(" WARNING: No I/O port available for 3c509 activation.\n"); printk(" WARNING: No I/O port available for 3c509 activation.\n");
return -ENODEV; return -ENODEV;
} }
#endif /* CONFIG_X86_PC9800 */
/* Next check for all ISA bus boards by sending the ID sequence to the /* Next check for all ISA bus boards by sending the ID sequence to the
ID_PORT. We find cards past the first by setting the 'current_tag' ID_PORT. We find cards past the first by setting the 'current_tag'
on cards as they are found. Cards with their tag set will not on cards as they are found. Cards with their tag set will not
...@@ -465,7 +473,7 @@ static int __init el3_probe(int card_idx) ...@@ -465,7 +473,7 @@ static int __init el3_probe(int card_idx)
phys_addr[i] = htons(id_read_eeprom(i)); phys_addr[i] = htons(id_read_eeprom(i));
} }
#ifdef __ISAPNP__ #if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
if (nopnp == 0) { if (nopnp == 0) {
/* The ISA PnP 3c509 cards respond to the ID sequence. /* The ISA PnP 3c509 cards respond to the ID sequence.
This check is needed in order not to register them twice. */ This check is needed in order not to register them twice. */
...@@ -490,9 +498,19 @@ static int __init el3_probe(int card_idx) ...@@ -490,9 +498,19 @@ static int __init el3_probe(int card_idx)
{ {
unsigned int iobase = id_read_eeprom(8); unsigned int iobase = id_read_eeprom(8);
if_port = iobase >> 14; if_port = iobase >> 14;
#ifdef CONFIG_X86_PC9800
ioaddr = 0x40d0 + ((iobase & 0x1f) << 8);
#else
ioaddr = 0x200 + ((iobase & 0x1f) << 4); ioaddr = 0x200 + ((iobase & 0x1f) << 4);
#endif
} }
irq = id_read_eeprom(9) >> 12; irq = id_read_eeprom(9) >> 12;
#ifdef CONFIG_X86_PC9800
if (irq == 7)
irq = 6;
else if (irq == 15)
irq = 13;
#endif
if (!(dev = init_etherdev(NULL, sizeof(struct el3_private)))) if (!(dev = init_etherdev(NULL, sizeof(struct el3_private))))
return -ENOMEM; return -ENOMEM;
...@@ -522,7 +540,11 @@ static int __init el3_probe(int card_idx) ...@@ -522,7 +540,11 @@ static int __init el3_probe(int card_idx)
outb(0xd0 + ++current_tag, id_port); outb(0xd0 + ++current_tag, id_port);
/* Activate the adaptor at the EEPROM location. */ /* Activate the adaptor at the EEPROM location. */
#ifdef CONFIG_X86_PC9800
outb((ioaddr >> 8) | 0xe0, id_port);
#else
outb((ioaddr >> 4) | 0xe0, id_port); outb((ioaddr >> 4) | 0xe0, id_port);
#endif
EL3WINDOW(0); EL3WINDOW(0);
if (inw(ioaddr) != 0x6d50) { if (inw(ioaddr) != 0x6d50) {
...@@ -534,7 +556,7 @@ static int __init el3_probe(int card_idx) ...@@ -534,7 +556,7 @@ static int __init el3_probe(int card_idx)
/* Free the interrupt so that some other card can use it. */ /* Free the interrupt so that some other card can use it. */
outw(0x0f00, ioaddr + WN0_IRQ); outw(0x0f00, ioaddr + WN0_IRQ);
#ifdef __ISAPNP__ #if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
found: /* PNP jumps here... */ found: /* PNP jumps here... */
#endif /* __ISAPNP__ */ #endif /* __ISAPNP__ */
...@@ -543,7 +565,7 @@ static int __init el3_probe(int card_idx) ...@@ -543,7 +565,7 @@ static int __init el3_probe(int card_idx)
dev->irq = irq; dev->irq = irq;
dev->if_port = if_port; dev->if_port = if_port;
lp = dev->priv; lp = dev->priv;
#ifdef __ISAPNP__ #if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
lp->dev = &idev->dev; lp->dev = &idev->dev;
#endif #endif
...@@ -1388,6 +1410,12 @@ el3_up(struct net_device *dev) ...@@ -1388,6 +1410,12 @@ el3_up(struct net_device *dev)
outw(0x0001, ioaddr + 4); outw(0x0001, ioaddr + 4);
/* Set the IRQ line. */ /* Set the IRQ line. */
#ifdef CONFIG_X86_PC9800
if (dev->irq == 6)
dev->irq = 7;
else if (dev->irq == 13)
dev->irq = 15;
#endif
outw((dev->irq << 12) | 0x0f00, ioaddr + WN0_IRQ); outw((dev->irq << 12) | 0x0f00, ioaddr + WN0_IRQ);
/* Set the station address in window 2 each time opened. */ /* Set the station address in window 2 each time opened. */
...@@ -1550,7 +1578,7 @@ MODULE_PARM_DESC(debug, "debug level (0-6)"); ...@@ -1550,7 +1578,7 @@ MODULE_PARM_DESC(debug, "debug level (0-6)");
MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
MODULE_PARM_DESC(xcvr,"transceiver(s) (0=internal, 1=external)"); MODULE_PARM_DESC(xcvr,"transceiver(s) (0=internal, 1=external)");
MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt"); MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt");
#ifdef __ISAPNP__ #if defined(__ISAPNP__) && !defined(CONFIG_X86_PC9800)
MODULE_PARM(nopnp, "i"); MODULE_PARM(nopnp, "i");
MODULE_PARM_DESC(nopnp, "disable ISA PnP support (0-1)"); MODULE_PARM_DESC(nopnp, "disable ISA PnP support (0-1)");
MODULE_DEVICE_TABLE(isapnp, el3_isapnp_adapters); MODULE_DEVICE_TABLE(isapnp, el3_isapnp_adapters);
......
...@@ -123,7 +123,8 @@ struct ei_device { ...@@ -123,7 +123,8 @@ struct ei_device {
#define inb_p(port) in_8(port) #define inb_p(port) in_8(port)
#define outb_p(val,port) out_8(port,val) #define outb_p(val,port) out_8(port,val)
#elif defined(CONFIG_ARM_ETHERH) || defined(CONFIG_ARM_ETHERH_MODULE) #elif defined(CONFIG_ARM_ETHERH) || defined(CONFIG_ARM_ETHERH_MODULE) || \
defined(CONFIG_NET_CBUS)
#define EI_SHIFT(x) (ei_local->reg_offset[x]) #define EI_SHIFT(x) (ei_local->reg_offset[x])
#else #else
#define EI_SHIFT(x) (x) #define EI_SHIFT(x) (x)
......
...@@ -663,7 +663,7 @@ config EL16 ...@@ -663,7 +663,7 @@ config EL16
as <file:Documentation/networking/net-modules.txt>. as <file:Documentation/networking/net-modules.txt>.
config EL3 config EL3
tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support" tristate "3c509/3c529 (MCA)/3c569B (98)/3c579 \"EtherLink III\" support"
depends on NET_VENDOR_3COM && (ISA || EISA || MCA) depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
---help--- ---help---
If you have a network (Ethernet) card belonging to the 3Com If you have a network (Ethernet) card belonging to the 3Com
...@@ -932,7 +932,7 @@ config NI65 ...@@ -932,7 +932,7 @@ config NI65
source "drivers/net/tulip/Kconfig" source "drivers/net/tulip/Kconfig"
config AT1700 config AT1700
tristate "AT1700/1720 support (EXPERIMENTAL)" tristate "AT1700/1720/RE1000Plus(C-Bus) support (EXPERIMENTAL)"
depends on NET_ETHERNET && (ISA || MCA) && EXPERIMENTAL depends on NET_ETHERNET && (ISA || MCA) && EXPERIMENTAL
---help--- ---help---
If you have a network (Ethernet) card of this type, say Y and read If you have a network (Ethernet) card of this type, say Y and read
...@@ -978,7 +978,7 @@ config HP100 ...@@ -978,7 +978,7 @@ config HP100
config NET_ISA config NET_ISA
bool "Other ISA cards" bool "Other ISA cards"
depends on NET_ETHERNET && ISA depends on NET_ETHERNET && ISA && !X86_PC9800
---help--- ---help---
If your network (Ethernet) card hasn't been mentioned yet and its If your network (Ethernet) card hasn't been mentioned yet and its
bus system (that's the way the cards talks to the other components bus system (that's the way the cards talks to the other components
...@@ -1176,6 +1176,55 @@ config SK_G16 ...@@ -1176,6 +1176,55 @@ config SK_G16
the Ethernet-HOWTO, available from the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. <http://www.linuxdoc.org/docs.html#howto>.
config NET_CBUS
bool "NEC PC-9800 C-bus cards"
depends on NET_ETHERNET && ISA && X86_PC9800
---help---
If your network (Ethernet) card hasn't been mentioned yet and its
bus system (that's the way the cards talks to the other components
of your computer) is NEC PC-9800 C-Bus, say Y.
config NE2K_CBUS
tristate "Most NE2000-based Ethernet support"
depends on NET_CBUS
config NE2K_CBUS_EGY98
bool "Melco EGY-98 support"
depends on NE2K_CBUS
config NE2K_CBUS_LGY98
bool "Melco LGY-98 support"
depends on NE2K_CBUS
config NE2K_CBUS_ICM
bool "ICM IF-27xxET support"
depends on NE2K_CBUS
config NE2K_CBUS_IOLA98
bool "I-O DATA LA-98 support"
depends on NE2K_CBUS
config NE2K_CBUS_CNET98EL
bool "Contec C-NET(98)E/L support"
depends on NE2K_CBUS
config NE2K_CBUS_CNET98EL_IO_BASE
hex "C-NET(98)E/L I/O base address (0xaaed or 0x55ed)"
depends on NE2K_CBUS_CNET98EL
default "0xaaed"
config NE2K_CBUS_ATLA98
bool "Allied Telesis LA-98 Support"
depends on NE2K_CBUS
config NE2K_CBUS_BDN
bool "ELECOM Laneed LD-BDN[123]A Support"
depends on NE2K_CBUS
config NE2K_CBUS_NEC108
bool "NEC PC-9801-108 Support"
depends on NE2K_CBUS
config SKMC config SKMC
tristate "SKnet MCA support" tristate "SKnet MCA support"
depends on NET_ETHERNET && MCA depends on NET_ETHERNET && MCA
......
...@@ -81,6 +81,7 @@ obj-$(CONFIG_ARM_ETHERH) += 8390.o ...@@ -81,6 +81,7 @@ obj-$(CONFIG_ARM_ETHERH) += 8390.o
obj-$(CONFIG_WD80x3) += wd.o 8390.o obj-$(CONFIG_WD80x3) += wd.o 8390.o
obj-$(CONFIG_EL2) += 3c503.o 8390.o obj-$(CONFIG_EL2) += 3c503.o 8390.o
obj-$(CONFIG_NE2000) += ne.o 8390.o obj-$(CONFIG_NE2000) += ne.o 8390.o
obj-$(CONFIG_NE2K_CBUS) += ne2k_cbus.o 8390.o
obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o
obj-$(CONFIG_HPLAN) += hp.o 8390.o obj-$(CONFIG_HPLAN) += hp.o 8390.o
obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
......
...@@ -19,6 +19,7 @@ obj-$(CONFIG_MACE) += crc32.o ...@@ -19,6 +19,7 @@ obj-$(CONFIG_MACE) += crc32.o
obj-$(CONFIG_MACMACE) += crc32.o obj-$(CONFIG_MACMACE) += crc32.o
obj-$(CONFIG_MIPS_AU1000_ENET) += crc32.o obj-$(CONFIG_MIPS_AU1000_ENET) += crc32.o
obj-$(CONFIG_NATSEMI) += crc32.o obj-$(CONFIG_NATSEMI) += crc32.o
obj-$(CONFIG_NE2K_CBUS) += crc32.o
obj-$(CONFIG_PCMCIA_FMVJ18X) += crc32.o obj-$(CONFIG_PCMCIA_FMVJ18X) += crc32.o
obj-$(CONFIG_PCMCIA_SMC91C92) += crc32.o obj-$(CONFIG_PCMCIA_SMC91C92) += crc32.o
obj-$(CONFIG_PCMCIA_XIRTULIP) += crc32.o obj-$(CONFIG_PCMCIA_XIRTULIP) += crc32.o
......
...@@ -233,7 +233,7 @@ static struct devprobe isa_probes[] __initdata = { ...@@ -233,7 +233,7 @@ static struct devprobe isa_probes[] __initdata = {
#ifdef CONFIG_E2100 /* Cabletron E21xx series. */ #ifdef CONFIG_E2100 /* Cabletron E21xx series. */
{e2100_probe, 0}, {e2100_probe, 0},
#endif #endif
#ifdef CONFIG_NE2000 /* ISA (use ne2k-pci for PCI cards) */ #if defined(CONFIG_NE2000) || defined(CONFIG_NE2K_CBUS) /* ISA & PC-9800 CBUS (use ne2k-pci for PCI cards) */
{ne_probe, 0}, {ne_probe, 0},
#endif #endif
#ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */ #ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */
......
...@@ -34,6 +34,10 @@ ...@@ -34,6 +34,10 @@
only is it difficult to detect, it also moves around in I/O space in only is it difficult to detect, it also moves around in I/O space in
response to inb()s from other device probes! response to inb()s from other device probes!
*/ */
/*
99/03/03 Allied Telesis RE1000 Plus support by T.Hagawa
99/12/30 port to 2.3.35 by K.Takai
*/
#include <linux/config.h> #include <linux/config.h>
#include <linux/errno.h> #include <linux/errno.h>
...@@ -76,10 +80,17 @@ static int fmv18x_probe_list[] __initdata = { ...@@ -76,10 +80,17 @@ static int fmv18x_probe_list[] __initdata = {
* ISA * ISA
*/ */
#ifndef CONFIG_X86_PC9800
static int at1700_probe_list[] __initdata = { static int at1700_probe_list[] __initdata = {
0x260, 0x280, 0x2a0, 0x240, 0x340, 0x320, 0x380, 0x300, 0 0x260, 0x280, 0x2a0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
}; };
#else /* CONFIG_X86_PC9800 */
static int at1700_probe_list[] __initdata = {
0x1d6, 0x1d8, 0x1da, 0x1d4, 0xd4, 0xd2, 0xd8, 0xd0, 0
};
#endif /* CONFIG_X86_PC9800 */
/* /*
* MCA * MCA
*/ */
...@@ -122,6 +133,7 @@ struct net_local { ...@@ -122,6 +133,7 @@ struct net_local {
/* Offsets from the base address. */ /* Offsets from the base address. */
#ifndef CONFIG_X86_PC9800
#define STATUS 0 #define STATUS 0
#define TX_STATUS 0 #define TX_STATUS 0
#define RX_STATUS 1 #define RX_STATUS 1
...@@ -136,6 +148,7 @@ struct net_local { ...@@ -136,6 +148,7 @@ struct net_local {
#define TX_START 10 #define TX_START 10
#define COL16CNTL 11 /* Controll Reg for 16 collisions */ #define COL16CNTL 11 /* Controll Reg for 16 collisions */
#define MODE13 13 #define MODE13 13
#define RX_CTRL 14
/* Configuration registers only on the '865A/B chips. */ /* Configuration registers only on the '865A/B chips. */
#define EEPROM_Ctrl 16 #define EEPROM_Ctrl 16
#define EEPROM_Data 17 #define EEPROM_Data 17
...@@ -144,8 +157,39 @@ struct net_local { ...@@ -144,8 +157,39 @@ struct net_local {
#define IOCONFIG 18 /* Either read the jumper, or move the I/O. */ #define IOCONFIG 18 /* Either read the jumper, or move the I/O. */
#define IOCONFIG1 19 #define IOCONFIG1 19
#define SAPROM 20 /* The station address PROM, if no EEPROM. */ #define SAPROM 20 /* The station address PROM, if no EEPROM. */
#define MODE24 24
#define RESET 31 /* Write to reset some parts of the chip. */ #define RESET 31 /* Write to reset some parts of the chip. */
#define AT1700_IO_EXTENT 32 #define AT1700_IO_EXTENT 32
#define PORT_OFFSET(o) (o)
#else /* CONFIG_X86_PC9800 */
#define STATUS (0x0000)
#define TX_STATUS (0x0000)
#define RX_STATUS (0x0001)
#define TX_INTR (0x0200)/* Bit-mapped interrupt enable registers. */
#define RX_INTR (0x0201)
#define TX_MODE (0x0400)
#define RX_MODE (0x0401)
#define CONFIG_0 (0x0600)/* Misc. configuration settings. */
#define CONFIG_1 (0x0601)
/* Run-time register bank 2 definitions. */
#define DATAPORT (0x0800)/* Word-wide DMA or programmed-I/O dataport. */
#define TX_START (0x0a00)
#define COL16CNTL (0x0a01)/* Controll Reg for 16 collisions */
#define MODE13 (0x0c01)
#define RX_CTRL (0x0e00)
/* Configuration registers only on the '865A/B chips. */
#define EEPROM_Ctrl (0x1000)
#define EEPROM_Data (0x1200)
#define CARDSTATUS 16 /* FMV-18x Card Status */
#define CARDSTATUS1 17 /* FMV-18x Card Status */
#define IOCONFIG (0x1400)/* Either read the jumper, or move the I/O. */
#define IOCONFIG1 (0x1600)
#define SAPROM 20 /* The station address PROM, if no EEPROM. */
#define MODE24 (0x1800)/* The station address PROM, if no EEPROM. */
#define RESET (0x1e01)/* Write to reset some parts of the chip. */
#define PORT_OFFSET(o) ({ int _o_ = (o); (_o_ & ~1) * 0x100 + (_o_ & 1); })
#endif /* CONFIG_X86_PC9800 */
#define TX_TIMEOUT 10 #define TX_TIMEOUT 10
...@@ -225,8 +269,20 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr) ...@@ -225,8 +269,20 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr)
int slot, ret = -ENODEV; int slot, ret = -ENODEV;
struct net_local *lp; struct net_local *lp;
#ifndef CONFIG_X86_PC9800
if (!request_region(ioaddr, AT1700_IO_EXTENT, dev->name)) if (!request_region(ioaddr, AT1700_IO_EXTENT, dev->name))
return -EBUSY; return -EBUSY;
#else
for (i = 0; i < 0x2000; i += 0x0200) {
if (!request_region(ioaddr + i, 2, dev->name)) {
while (i > 0) {
i -= 0x0200;
release_region(ioaddr + i, 2);
}
return -EBUSY;
}
}
#endif
/* Resetting the chip doesn't reset the ISA interface, so don't bother. /* Resetting the chip doesn't reset the ISA interface, so don't bother.
That means we have to be careful with the register values we probe for. That means we have to be careful with the register values we probe for.
...@@ -317,10 +373,17 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr) ...@@ -317,10 +373,17 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr)
/* Reset the internal state machines. */ /* Reset the internal state machines. */
outb(0, ioaddr + RESET); outb(0, ioaddr + RESET);
if (is_at1700) if (is_at1700) {
#ifndef CONFIG_X86_PC9800
irq = at1700_irqmap[(read_eeprom(ioaddr, 12)&0x04) irq = at1700_irqmap[(read_eeprom(ioaddr, 12)&0x04)
| (read_eeprom(ioaddr, 0)>>14)]; | (read_eeprom(ioaddr, 0)>>14)];
else { #else
{
char re1000plus_irqmap[4] = {3, 5, 6, 12};
irq = re1000plus_irqmap[inb(ioaddr + IOCONFIG1) >> 6];
}
#endif
} else {
/* Check PnP mode for FMV-183/184/183A/184A. */ /* Check PnP mode for FMV-183/184/183A/184A. */
/* This PnP routine is very poor. IO and IRQ should be known. */ /* This PnP routine is very poor. IO and IRQ should be known. */
if (inb(ioaddr + CARDSTATUS1) & 0x20) { if (inb(ioaddr + CARDSTATUS1) & 0x20) {
...@@ -392,18 +455,22 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr) ...@@ -392,18 +455,22 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr)
/* Set the station address in bank zero. */ /* Set the station address in bank zero. */
outb(0x00, ioaddr + CONFIG_1); outb(0x00, ioaddr + CONFIG_1);
for (i = 0; i < 6; i++) for (i = 0; i < 6; i++)
outb(dev->dev_addr[i], ioaddr + 8 + i); outb(dev->dev_addr[i], ioaddr + PORT_OFFSET(8 + i));
/* Switch to bank 1 and set the multicast table to accept none. */ /* Switch to bank 1 and set the multicast table to accept none. */
outb(0x04, ioaddr + CONFIG_1); outb(0x04, ioaddr + CONFIG_1);
for (i = 0; i < 8; i++) for (i = 0; i < 8; i++)
outb(0x00, ioaddr + 8 + i); outb(0x00, ioaddr + PORT_OFFSET(8 + i));
/* Switch to bank 2 */ /* Switch to bank 2 */
/* Lock our I/O address, and set manual processing mode for 16 collisions. */ /* Lock our I/O address, and set manual processing mode for 16 collisions. */
outb(0x08, ioaddr + CONFIG_1); outb(0x08, ioaddr + CONFIG_1);
#ifndef CONFIG_X86_PC9800
outb(dev->if_port, ioaddr + MODE13); outb(dev->if_port, ioaddr + MODE13);
#else
outb(0, ioaddr + MODE13);
#endif
outb(0x00, ioaddr + COL16CNTL); outb(0x00, ioaddr + COL16CNTL);
if (net_debug) if (net_debug)
...@@ -447,7 +514,12 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr) ...@@ -447,7 +514,12 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr)
kfree(dev->priv); kfree(dev->priv);
dev->priv = NULL; dev->priv = NULL;
err_out: err_out:
#ifndef CONFIG_X86_PC9800
release_region(ioaddr, AT1700_IO_EXTENT); release_region(ioaddr, AT1700_IO_EXTENT);
#else
for (i = 0; i < 0x2000; i += 0x0200)
release_region(ioaddr + i, 2);
#endif
return ret; return ret;
} }
...@@ -459,7 +531,11 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr) ...@@ -459,7 +531,11 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr)
#define EE_DATA_READ 0x80 /* EEPROM chip data out, in reg. 17. */ #define EE_DATA_READ 0x80 /* EEPROM chip data out, in reg. 17. */
/* Delay between EEPROM clock transitions. */ /* Delay between EEPROM clock transitions. */
#ifndef CONFIG_X86_PC9800
#define eeprom_delay() do { } while (0) #define eeprom_delay() do { } while (0)
#else
#define eeprom_delay() __asm__ ("out%B0 %%al,%0" :: "N"(0x5f))
#endif
/* The EEPROM commands include the alway-set leading bit. */ /* The EEPROM commands include the alway-set leading bit. */
#define EE_WRITE_CMD (5 << 6) #define EE_WRITE_CMD (5 << 6)
...@@ -542,12 +618,12 @@ static void net_tx_timeout (struct net_device *dev) ...@@ -542,12 +618,12 @@ static void net_tx_timeout (struct net_device *dev)
inw (ioaddr + STATUS), inb (ioaddr + TX_STATUS) & 0x80 inw (ioaddr + STATUS), inb (ioaddr + TX_STATUS) & 0x80
? "IRQ conflict" : "network cable problem"); ? "IRQ conflict" : "network cable problem");
printk ("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n", printk ("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n",
dev->name, inw (ioaddr + 0), inw (ioaddr + 2), inw (ioaddr + 4), dev->name, inw(ioaddr + TX_STATUS), inw(ioaddr + TX_INTR), inw(ioaddr + TX_MODE),
inw (ioaddr + 6), inw (ioaddr + 8), inw (ioaddr + 10), inw(ioaddr + CONFIG_0), inw(ioaddr + DATAPORT), inw(ioaddr + TX_START),
inw (ioaddr + 12), inw (ioaddr + 14)); inw(ioaddr + MODE13 - 1), inw(ioaddr + RX_CTRL));
lp->stats.tx_errors++; lp->stats.tx_errors++;
/* ToDo: We should try to restart the adaptor... */ /* ToDo: We should try to restart the adaptor... */
outw (0xffff, ioaddr + 24); outw(0xffff, ioaddr + MODE24);
outw (0xffff, ioaddr + TX_STATUS); outw (0xffff, ioaddr + TX_STATUS);
outb (0x5a, ioaddr + CONFIG_0); outb (0x5a, ioaddr + CONFIG_0);
outb (0xe8, ioaddr + CONFIG_1); outb (0xe8, ioaddr + CONFIG_1);
...@@ -704,7 +780,7 @@ net_rx(struct net_device *dev) ...@@ -704,7 +780,7 @@ net_rx(struct net_device *dev)
dev->name, inb(ioaddr + RX_MODE), status); dev->name, inb(ioaddr + RX_MODE), status);
#ifndef final_version #ifndef final_version
if (status == 0) { if (status == 0) {
outb(0x05, ioaddr + 14); outb(0x05, ioaddr + RX_CTRL);
break; break;
} }
#endif #endif
...@@ -724,7 +800,7 @@ net_rx(struct net_device *dev) ...@@ -724,7 +800,7 @@ net_rx(struct net_device *dev)
dev->name, pkt_len); dev->name, pkt_len);
/* Prime the FIFO and then flush the packet. */ /* Prime the FIFO and then flush the packet. */
inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT);
outb(0x05, ioaddr + 14); outb(0x05, ioaddr + RX_CTRL);
lp->stats.rx_errors++; lp->stats.rx_errors++;
break; break;
} }
...@@ -734,7 +810,7 @@ net_rx(struct net_device *dev) ...@@ -734,7 +810,7 @@ net_rx(struct net_device *dev)
dev->name, pkt_len); dev->name, pkt_len);
/* Prime the FIFO and then flush the packet. */ /* Prime the FIFO and then flush the packet. */
inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT);
outb(0x05, ioaddr + 14); outb(0x05, ioaddr + RX_CTRL);
lp->stats.rx_dropped++; lp->stats.rx_dropped++;
break; break;
} }
...@@ -761,7 +837,7 @@ net_rx(struct net_device *dev) ...@@ -761,7 +837,7 @@ net_rx(struct net_device *dev)
if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40) if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40)
break; break;
inw(ioaddr + DATAPORT); /* dummy status read */ inw(ioaddr + DATAPORT); /* dummy status read */
outb(0x05, ioaddr + 14); outb(0x05, ioaddr + RX_CTRL);
} }
if (net_debug > 5) if (net_debug > 5)
...@@ -844,24 +920,28 @@ set_rx_mode(struct net_device *dev) ...@@ -844,24 +920,28 @@ set_rx_mode(struct net_device *dev)
outb(0x02, ioaddr + RX_MODE); /* Use normal mode. */ outb(0x02, ioaddr + RX_MODE); /* Use normal mode. */
} }
save_flags(flags); spin_lock_irqsave (&lp->lock, flags);
cli();
if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) { if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) {
int saved_bank = inw(ioaddr + CONFIG_0); int saved_bank = inw(ioaddr + CONFIG_0);
/* Switch to bank 1 and set the multicast table. */ /* Switch to bank 1 and set the multicast table. */
outw((saved_bank & ~0x0C00) | 0x0480, ioaddr + CONFIG_0); outw((saved_bank & ~0x0C00) | 0x0480, ioaddr + CONFIG_0);
for (i = 0; i < 8; i++) for (i = 0; i < 8; i++)
outb(mc_filter[i], ioaddr + 8 + i); outb(mc_filter[i], ioaddr + PORT_OFFSET(8 + i));
memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter)); memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter));
outw(saved_bank, ioaddr + CONFIG_0); outw(saved_bank, ioaddr + CONFIG_0);
} }
restore_flags(flags); spin_unlock_irqrestore (&lp->lock, flags);
return; return;
} }
#ifdef MODULE #ifdef MODULE
static struct net_device dev_at1700; static struct net_device dev_at1700;
#ifndef CONFIG_X86_PC9800
static int io = 0x260; static int io = 0x260;
#else
static int io = 0xd0;
#endif
static int irq; static int irq;
MODULE_PARM(io, "i"); MODULE_PARM(io, "i");
...@@ -901,7 +981,15 @@ cleanup_module(void) ...@@ -901,7 +981,15 @@ cleanup_module(void)
/* If we don't do this, we can't re-insmod it later. */ /* If we don't do this, we can't re-insmod it later. */
free_irq(dev_at1700.irq, NULL); free_irq(dev_at1700.irq, NULL);
#ifndef CONFIG_X86_PC9800
release_region(dev_at1700.base_addr, AT1700_IO_EXTENT); release_region(dev_at1700.base_addr, AT1700_IO_EXTENT);
#else
{
int i;
for (i = 0; i < 0x2000; i += 0x200)
release_region(dev_at1700.base_addr + i, 2);
}
#endif
} }
#endif /* MODULE */ #endif /* MODULE */
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
......
/* ne.c: A general non-shared-memory NS8390 ethernet driver for linux. */
/*
Written 1992-94 by Donald Becker.
Copyright 1993 United States Government as represented by the
Director, National Security Agency.
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
The author may be reached as becker@scyld.com, or C/O
Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
This driver should work with many programmed-I/O 8390-based ethernet
boards. Currently it supports the NE1000, NE2000, many clones,
and some Cabletron products.
Changelog:
Paul Gortmaker : use ENISR_RDC to monitor Tx PIO uploads, made
sanity checks and bad clone support optional.
Paul Gortmaker : new reset code, reset card after probe at boot.
Paul Gortmaker : multiple card support for module users.
Paul Gortmaker : Support for PCI ne2k clones, similar to lance.c
Paul Gortmaker : Allow users with bad cards to avoid full probe.
Paul Gortmaker : PCI probe changes, more PCI cards supported.
rjohnson@analogic.com : Changed init order so an interrupt will only
occur after memory is allocated for dev->priv. Deallocated memory
last in cleanup_modue()
Richard Guenther : Added support for ISAPnP cards
Paul Gortmaker : Discontinued PCI support - use ne2k-pci.c instead.
Osamu Tomita : Separate driver for NEC PC-9800.
*/
/* Routines for the NatSemi-based designs (NE[12]000). */
static const char version1[] =
"ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)\n";
static const char version2[] =
"Last modified Nov 1, 2000 by Paul Gortmaker\n";
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/isapnp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <asm/system.h>
#include <asm/io.h>
#include "8390.h"
/* Some defines that people can play with if so inclined. */
/* Do we support clones that don't adhere to 14,15 of the SAprom ? */
#define SUPPORT_NE_BAD_CLONES
/* Do we perform extra sanity checks on stuff ? */
/* #define NE_SANITY_CHECK */
/* Do we implement the read before write bugfix ? */
/* #define NE_RW_BUGFIX */
/* Do we have a non std. amount of memory? (in units of 256 byte pages) */
/* #define PACKETBUF_MEMSIZE 0x40 */
#ifdef SUPPORT_NE_BAD_CLONES
/* A list of bad clones that we none-the-less recognize. */
static struct { const char *name8, *name16; unsigned char SAprefix[4];}
bad_clone_list[] __initdata = {
{"LA/T-98?", "LA/T-98", {0x00, 0xa0, 0xb0}}, /* I/O Data */
{"EGY-98?", "EGY-98", {0x00, 0x40, 0x26}}, /* Melco EGY98 */
{"ICM?", "ICM-27xx-ET", {0x00, 0x80, 0xc8}}, /* ICM IF-27xx-ET */
{"CNET-98/EL?", "CNET(98)E/L", {0x00, 0x80, 0x4C}}, /* Contec CNET-98/EL */
{0,}
};
#endif
/* ---- No user-serviceable parts below ---- */
#define NE_BASE (dev->base_addr)
#define NE_CMD EI_SHIFT(0x00)
#define NE_DATAPORT EI_SHIFT(0x10) /* NatSemi-defined port window offset. */
#define NE_RESET EI_SHIFT(0x1f) /* Issue a read to reset, a write to clear. */
#define NE_IO_EXTENT 0x20
#define NE1SM_START_PG 0x20 /* First page of TX buffer */
#define NE1SM_STOP_PG 0x40 /* Last page +1 of RX ring */
#define NESM_START_PG 0x40 /* First page of TX buffer */
#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
#include "ne2k_cbus.h"
int ne_probe(struct net_device *dev);
static int ne_probe1(struct net_device *dev, int ioaddr);
static int ne_open(struct net_device *dev);
static int ne_close(struct net_device *dev);
static void ne_reset_8390(struct net_device *dev);
static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
int ring_page);
static void ne_block_input(struct net_device *dev, int count,
struct sk_buff *skb, int ring_offset);
static void ne_block_output(struct net_device *dev, const int count,
const unsigned char *buf, const int start_page);
/* Probe for various non-shared-memory ethercards.
NEx000-clone boards have a Station Address PROM (SAPROM) in the packet
buffer memory space. NE2000 clones have 0x57,0x57 in bytes 0x0e,0x0f of
the SAPROM, while other supposed NE2000 clones must be detected by their
SA prefix.
Reading the SAPROM from a word-wide card with the 8390 set in byte-wide
mode results in doubled values, which can be detected and compensated for.
The probe is also responsible for initializing the card and filling
in the 'dev' and 'ei_status' structures.
We use the minimum memory size for some ethercard product lines, iff we can't
distinguish models. You can increase the packet buffer size by setting
PACKETBUF_MEMSIZE. Reported Cabletron packet buffer locations are:
E1010 starts at 0x100 and ends at 0x2000.
E1010-x starts at 0x100 and ends at 0x8000. ("-x" means "more memory")
E2010 starts at 0x100 and ends at 0x4000.
E2010-x starts at 0x100 and ends at 0xffff. */
int __init ne_probe(struct net_device *dev)
{
unsigned int base_addr = dev->base_addr;
SET_MODULE_OWNER(dev);
if (ei_debug > 2)
printk(KERN_DEBUG "ne_probe(): entered.\n");
/* If CONFIG_NET_CBUS,
we need dev->priv->reg_offset BEFORE to probe */
if (ne2k_cbus_init(dev) != 0)
return -ENOMEM;
/* First check any supplied i/o locations. User knows best. <cough> */
if (base_addr > 0) {
int result;
const struct ne2k_cbus_hwinfo *hw = ne2k_cbus_get_hwinfo((int)(dev->mem_start & NE2K_CBUS_HARDWARE_TYPE_MASK));
if (ei_debug > 2)
printk(KERN_DEBUG "ne_probe(): call ne_probe_cbus(base_addr=0x%x)\n", base_addr);
result = ne_probe_cbus(dev, hw, base_addr);
if (result != 0)
ne2k_cbus_destroy(dev);
return result;
}
if (ei_debug > 2)
printk(KERN_DEBUG "ne_probe(): base_addr is not specified.\n");
#ifndef MODULE
/* Last resort. The semi-risky C-Bus auto-probe. */
if (ei_debug > 2)
printk(KERN_DEBUG "ne_probe(): auto-probe start.\n");
{
const struct ne2k_cbus_hwinfo *hw = ne2k_cbus_get_hwinfo((int)(dev->mem_start & NE2K_CBUS_HARDWARE_TYPE_MASK));
if (hw && hw->hwtype) {
const unsigned short *plist;
for (plist = hw->portlist; *plist; plist++)
if (ne_probe_cbus(dev, hw, *plist) == 0)
return 0;
} else {
for (hw = &ne2k_cbus_hwinfo_list[0]; hw->hwtype; hw++) {
const unsigned short *plist;
for (plist = hw->portlist; *plist; plist++)
if (ne_probe_cbus(dev, hw, *plist) == 0)
return 0;
}
}
}
#endif
ne2k_cbus_destroy(dev);
return -ENODEV;
}
static int __init ne_probe_cbus(struct net_device *dev, const struct ne2k_cbus_hwinfo *hw, int ioaddr)
{
if (ei_debug > 2)
printk(KERN_DEBUG "ne_probe_cbus(): entered. (called from %p)\n",
__builtin_return_address(0));
if (hw && hw->hwtype) {
ne2k_cbus_set_hwtype(dev, hw, ioaddr);
return ne_probe1(dev, ioaddr);
} else {
/* auto detect */
printk(KERN_DEBUG "ne_probe_cbus(): try to determine hardware types.\n");
for (hw = &ne2k_cbus_hwinfo_list[0]; hw->hwtype; hw++) {
ne2k_cbus_set_hwtype(dev, hw, ioaddr);
if (ne_probe1(dev, ioaddr) == 0)
return 0;
}
}
return -ENODEV;
}
static int __init ne_probe1(struct net_device *dev, int ioaddr)
{
int i;
unsigned char SA_prom[32];
int wordlength = 2;
const char *name = NULL;
int start_page, stop_page;
int neX000, bad_card;
int reg0, ret;
static unsigned version_printed;
const struct ne2k_cbus_region *rlist;
const struct ne2k_cbus_hwinfo *hw = ne2k_cbus_get_hwinfo((int)(dev->mem_start & NE2K_CBUS_HARDWARE_TYPE_MASK));
struct ei_device *ei_local = (struct ei_device *)(dev->priv);
#ifdef CONFIG_NE2K_CBUS_CNET98EL
if (hw->hwtype == NE2K_CBUS_HARDWARE_TYPE_CNET98EL) {
outb_p(0, CONFIG_NE2K_CBUS_CNET98EL_IO_BASE);
/* udelay(5000); */
outb_p(1, CONFIG_NE2K_CBUS_CNET98EL_IO_BASE);
/* udelay(5000); */
outb_p((ioaddr & 0xf000) >> 8 | 0x08 | 0x01, CONFIG_NE2K_CBUS_CNET98EL_IO_BASE + 2);
/* udelay(5000); */
}
#endif
for (rlist = hw->regionlist; rlist->range; rlist++)
if (!request_region(ioaddr + rlist->start,
rlist->range, dev->name)) {
ret = -EBUSY;
goto err_out;
}
reg0 = inb_p(ioaddr + EI_SHIFT(0));
if (reg0 == 0xFF) {
ret = -ENODEV;
goto err_out;
}
/* Do a preliminary verification that we have a 8390. */
#ifdef CONFIG_NE2K_CBUS_CNET98EL
if (hw->hwtype != NE2K_CBUS_HARDWARE_TYPE_CNET98EL)
#endif
{
int regd;
outb_p(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);
regd = inb_p(ioaddr + EI_SHIFT(0x0d));
outb_p(0xff, ioaddr + EI_SHIFT(0x0d));
outb_p(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);
inb_p(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
if (inb_p(ioaddr + EN0_COUNTER0) != 0) {
outb_p(reg0, ioaddr);
outb_p(regd, ioaddr + EI_SHIFT(0x0d)); /* Restore the old values. */
ret = -ENODEV;
goto err_out;
}
}
if (ei_debug && version_printed++ == 0)
printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2);
printk(KERN_INFO "NE*000 ethercard probe at %#3x:", ioaddr);
/* A user with a poor card that fails to ack the reset, or that
does not have a valid 0x57,0x57 signature can still use this
without having to recompile. Specifying an i/o address along
with an otherwise unused dev->mem_end value of "0xBAD" will
cause the driver to skip these parts of the probe. */
bad_card = ((dev->base_addr != 0) && (dev->mem_end == 0xbad));
/* Reset card. Who knows what dain-bramaged state it was left in. */
{
unsigned long reset_start_time = jiffies;
/* derived from CNET98EL-patch for bad clones */
outb_p(E8390_NODMA | E8390_STOP, ioaddr + E8390_CMD);
/* DON'T change these to inb_p/outb_p or reset will fail on clones. */
outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);
while ((inb_p(ioaddr + EN0_ISR) & ENISR_RESET) == 0)
if (jiffies - reset_start_time > 2*HZ/100) {
if (bad_card) {
printk(" (warning: no reset ack)");
break;
} else {
printk(" not found (no reset ack).\n");
ret = -ENODEV;
goto err_out;
}
}
outb_p(0xff, ioaddr + EN0_ISR); /* Ack all intr. */
}
#ifdef CONFIG_NE2K_CBUS_CNET98EL
if (hw->hwtype == NE2K_CBUS_HARDWARE_TYPE_CNET98EL) {
static const char pat[32] ="AbcdeFghijKlmnoPqrstUvwxyZ789012";
char buf[32];
int maxwait = 200;
if (ei_debug > 2)
printk(" [CNET98EL-specific initialize...");
outb_p(E8390_NODMA | E8390_STOP, ioaddr + E8390_CMD); /* 0x20|0x1 */
i = inb(ioaddr);
if ((i & ~0x2) != (0x20 | 0x01))
return -ENODEV;
if ((inb(ioaddr + 0x7) & 0x80) != 0x80)
return -ENODEV;
outb_p(E8390_RXOFF, ioaddr + EN0_RXCR); /* out(ioaddr+0xc, 0x20) */
/* outb_p(ENDCFG_WTS|ENDCFG_FT1|ENDCFG_LS, ioaddr+EN0_DCFG); */
outb_p(ENDCFG_WTS | 0x48, ioaddr + EN0_DCFG); /* 0x49 */
outb_p(CNET98EL_START_PG, ioaddr + EN0_STARTPG);
outb_p(CNET98EL_STOP_PG, ioaddr + EN0_STOPPG);
if (ei_debug > 2)
printk("memory check");
for (i = 0; i < 65536; i += 1024) {
if (ei_debug > 2)
printk(" %04x", i);
ne2k_cbus_writemem(dev, ioaddr, i, pat, 32);
while (((inb(ioaddr + EN0_ISR) & ENISR_RDC) != ENISR_RDC) && --maxwait)
;
ne2k_cbus_readmem(dev, ioaddr, i, buf, 32);
if (memcmp(pat, buf, 32)) {
if (ei_debug > 2)
printk(" failed.");
break;
}
}
if (i != 16384) {
if (ei_debug > 2)
printk("] ");
printk("memory failure at %x\n", i);
return -ENODEV;
}
if (ei_debug > 2)
printk(" good...");
if (!dev->irq) {
if (ei_debug > 2)
printk("] ");
printk("IRQ must be specified for C-NET(98)E/L. probe failed.\n");
return -ENODEV;
}
outb((dev->irq > 5) ? (dev->irq & 4):(dev->irq >> 1), ioaddr + (0x2 | 0x400));
outb(0x7e, ioaddr + (0x4 | 0x400));
ne2k_cbus_readmem(dev, ioaddr, 16384, SA_prom, 32);
outb(0xff, ioaddr + EN0_ISR);
if (ei_debug > 2)
printk("done]");
} else
#endif /* CONFIG_NE2K_CBUS_CNET98EL */
/* Read the 16 bytes of station address PROM.
We must first initialize registers, similar to NS8390_init(eifdev, 0).
We can't reliably read the SAPROM address without this.
(I learned the hard way!). */
{
struct {unsigned char value; unsigned short offset;} program_seq[] =
{
{E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
/* NEC PC-9800: some board can only handle word-wide access? */
{0x48 | ENDCFG_WTS, EN0_DCFG}, /* Set word-wide (0x48) access. */
{16384 / 256, EN0_STARTPG},
{32768 / 256, EN0_STOPPG},
{0x00, EN0_RCNTLO}, /* Clear the count regs. */
{0x00, EN0_RCNTHI},
{0x00, EN0_IMR}, /* Mask completion irq. */
{0xFF, EN0_ISR},
{E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
{E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
{32, EN0_RCNTLO},
{0x00, EN0_RCNTHI},
{0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
{0x00, EN0_RSARHI},
{E8390_RREAD+E8390_START, E8390_CMD},
};
for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
insw(ioaddr + NE_DATAPORT, SA_prom, 32 >> 1);
}
if (wordlength == 2)
{
for (i = 0; i < 16; i++)
SA_prom[i] = SA_prom[i+i];
start_page = NESM_START_PG;
stop_page = NESM_STOP_PG;
#ifdef CONFIG_NE2K_CBUS_CNET98EL
if (hw->hwtype == NE2K_CBUS_HARDWARE_TYPE_CNET98EL) {
start_page = CNET98EL_START_PG;
stop_page = CNET98EL_STOP_PG;
}
#endif
} else {
start_page = NE1SM_START_PG;
stop_page = NE1SM_STOP_PG;
}
neX000 = (SA_prom[14] == 0x57 && SA_prom[15] == 0x57);
if (neX000) {
name = "C-Bus-NE2K-compat";
}
else
{
#ifdef SUPPORT_NE_BAD_CLONES
/* Ack! Well, there might be a *bad* NE*000 clone there.
Check for total bogus addresses. */
for (i = 0; bad_clone_list[i].name8; i++)
{
if (SA_prom[0] == bad_clone_list[i].SAprefix[0] &&
SA_prom[1] == bad_clone_list[i].SAprefix[1] &&
SA_prom[2] == bad_clone_list[i].SAprefix[2])
{
if (wordlength == 2)
{
name = bad_clone_list[i].name16;
} else {
name = bad_clone_list[i].name8;
}
break;
}
}
if (bad_clone_list[i].name8 == NULL)
{
printk(" not found (invalid signature %2.2x %2.2x).\n",
SA_prom[14], SA_prom[15]);
ret = -ENXIO;
goto err_out;
}
#else
printk(" not found.\n");
ret = -ENXIO;
goto err_out;
#endif
}
if (dev->irq < 2)
{
unsigned long cookie = probe_irq_on();
outb_p(0x50, ioaddr + EN0_IMR); /* Enable one interrupt. */
outb_p(0x00, ioaddr + EN0_RCNTLO);
outb_p(0x00, ioaddr + EN0_RCNTHI);
outb_p(E8390_RREAD+E8390_START, ioaddr); /* Trigger it... */
mdelay(10); /* wait 10ms for interrupt to propagate */
outb_p(0x00, ioaddr + EN0_IMR); /* Mask it again. */
dev->irq = probe_irq_off(cookie);
if (ei_debug > 2)
printk(" autoirq is %d\n", dev->irq);
} else if (dev->irq == 7)
/* Fixup for users that don't know that IRQ 7 is really IRQ 11,
or don't know which one to set. */
dev->irq = 11;
if (! dev->irq) {
printk(" failed to detect IRQ line.\n");
ret = -EAGAIN;
goto err_out;
}
/* Allocate dev->priv and fill in 8390 specific dev fields. */
if (ethdev_init(dev))
{
printk (" unable to get memory for dev->priv.\n");
ret = -ENOMEM;
goto err_out;
}
/* Snarf the interrupt now. There's no point in waiting since we cannot
share and the board will usually be enabled. */
ret = request_irq(dev->irq, ei_interrupt, 0, name, dev);
if (ret) {
printk (" unable to get IRQ %d (errno=%d).\n", dev->irq, ret);
goto err_out_kfree;
}
dev->base_addr = ioaddr;
for(i = 0; i < ETHER_ADDR_LEN; i++) {
printk(" %2.2x", SA_prom[i]);
dev->dev_addr[i] = SA_prom[i];
}
printk("\n%s: %s found at %#x, hardware type %d(%s), using IRQ %d.\n",
dev->name, name, ioaddr, hw->hwtype, hw->hwident, dev->irq);
ei_status.name = name;
ei_status.tx_start_page = start_page;
ei_status.stop_page = stop_page;
ei_status.word16 = (wordlength == 2);
ei_status.rx_start_page = start_page + TX_PAGES;
#ifdef PACKETBUF_MEMSIZE
/* Allow the packet buffer size to be overridden by know-it-alls. */
ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE;
#endif
ei_status.reset_8390 = &ne_reset_8390;
ei_status.block_input = &ne_block_input;
ei_status.block_output = &ne_block_output;
ei_status.get_8390_hdr = &ne_get_8390_hdr;
ei_status.priv = 0;
dev->open = &ne_open;
dev->stop = &ne_close;
NS8390_init(dev, 0);
return 0;
err_out_kfree:
ne2k_cbus_destroy(dev);
err_out:
while (rlist > hw->regionlist) {
rlist --;
release_region(ioaddr + rlist->start, rlist->range);
}
return ret;
}
static int ne_open(struct net_device *dev)
{
ei_open(dev);
return 0;
}
static int ne_close(struct net_device *dev)
{
if (ei_debug > 1)
printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name);
ei_close(dev);
return 0;
}
/* Hard reset the card. This used to pause for the same period that a
8390 reset command required, but that shouldn't be necessary. */
static void ne_reset_8390(struct net_device *dev)
{
unsigned long reset_start_time = jiffies;
struct ei_device *ei_local = (struct ei_device *)(dev->priv);
if (ei_debug > 1)
printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies);
/* derived from CNET98EL-patch for bad clones... */
outb_p(E8390_NODMA | E8390_STOP, NE_BASE + E8390_CMD); /* 0x20 | 0x1 */
/* DON'T change these to inb_p/outb_p or reset will fail on clones. */
outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
ei_status.txing = 0;
ei_status.dmaing = 0;
/* This check _should_not_ be necessary, omit eventually. */
while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
if (jiffies - reset_start_time > 2*HZ/100) {
printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name);
break;
}
outb_p(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */
}
/* Grab the 8390 specific header. Similar to the block_input routine, but
we don't need to be concerned with ring wrap as the header will be at
the start of a page, so we optimize accordingly. */
static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
{
int nic_base = dev->base_addr;
struct ei_device *ei_local = (struct ei_device *)(dev->priv);
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
if (ei_status.dmaing)
{
printk(KERN_EMERG "%s: DMAing conflict in ne_get_8390_hdr "
"[DMAstat:%d][irqlock:%d].\n",
dev->name, ei_status.dmaing, ei_status.irqlock);
return;
}
ei_status.dmaing |= 0x01;
outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
outb_p(0, nic_base + EN0_RCNTHI);
outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */
outb_p(ring_page, nic_base + EN0_RSARHI);
outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD);
if (ei_status.word16)
insw(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
else
insb(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
ei_status.dmaing &= ~0x01;
le16_to_cpus(&hdr->count);
}
/* Block input and output, similar to the Crynwr packet driver. If you
are porting to a new ethercard, look at the packet driver source for hints.
The NEx000 doesn't share the on-board packet memory -- you have to put
the packet out through the "remote DMA" dataport using outb. */
static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
{
#ifdef NE_SANITY_CHECK
int xfer_count = count;
#endif
int nic_base = dev->base_addr;
char *buf = skb->data;
struct ei_device *ei_local = (struct ei_device *)(dev->priv);
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
if (ei_status.dmaing)
{
printk(KERN_EMERG "%s: DMAing conflict in ne_block_input "
"[DMAstat:%d][irqlock:%d].\n",
dev->name, ei_status.dmaing, ei_status.irqlock);
return;
}
ei_status.dmaing |= 0x01;
/* round up count to a word (derived from ICM-patch) */
count = (count + 1) & ~1;
outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
outb_p(count & 0xff, nic_base + EN0_RCNTLO);
outb_p(count >> 8, nic_base + EN0_RCNTHI);
outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD);
if (ei_status.word16)
{
insw(NE_BASE + NE_DATAPORT,buf,count>>1);
if (count & 0x01)
{
buf[count-1] = inb(NE_BASE + NE_DATAPORT);
#ifdef NE_SANITY_CHECK
xfer_count++;
#endif
}
} else {
insb(NE_BASE + NE_DATAPORT, buf, count);
}
#ifdef NE_SANITY_CHECK
/* This was for the ALPHA version only, but enough people have
been encountering problems so it is still here. If you see
this message you either 1) have a slightly incompatible clone
or 2) have noise/speed problems with your bus. */
if (ei_debug > 1)
{
/* DMA termination address check... */
int addr, tries = 20;
do {
/* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here
-- it's broken for Rx on some cards! */
int high = inb_p(nic_base + EN0_RSARHI);
int low = inb_p(nic_base + EN0_RSARLO);
addr = (high << 8) + low;
if (((ring_offset + xfer_count) & 0xff) == low)
break;
} while (--tries > 0);
if (tries <= 0)
printk(KERN_WARNING "%s: RX transfer address mismatch,"
"%#4.4x (expected) vs. %#4.4x (actual).\n",
dev->name, ring_offset + xfer_count, addr);
}
#endif
outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
ei_status.dmaing &= ~0x01;
}
static void ne_block_output(struct net_device *dev, int count,
const unsigned char *buf, const int start_page)
{
int nic_base = NE_BASE;
unsigned long dma_start;
#ifdef NE_SANITY_CHECK
int retries = 0;
#endif
struct ei_device *ei_local = (struct ei_device *)(dev->priv);
/* Round the count up for word writes. Do we need to do this?
What effect will an odd byte count have on the 8390?
I should check someday. */
if (ei_status.word16 && (count & 0x01))
count++;
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
if (ei_status.dmaing)
{
printk(KERN_EMERG "%s: DMAing conflict in ne_block_output."
"[DMAstat:%d][irqlock:%d]\n",
dev->name, ei_status.dmaing, ei_status.irqlock);
return;
}
ei_status.dmaing |= 0x01;
/* We should already be in page 0, but to be safe... */
outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
#ifdef NE_SANITY_CHECK
retry:
#endif
#ifdef NE8390_RW_BUGFIX
/* Handle the read-before-write bug the same way as the
Crynwr packet driver -- the NatSemi method doesn't work.
Actually this doesn't always work either, but if you have
problems with your NEx000 this is better than nothing! */
outb_p(0x42, nic_base + EN0_RCNTLO);
outb_p(0x00, nic_base + EN0_RCNTHI);
outb_p(0x42, nic_base + EN0_RSARLO);
outb_p(0x00, nic_base + EN0_RSARHI);
outb_p(E8390_RREAD+E8390_START, nic_base + NE_CMD);
/* Make certain that the dummy read has occurred. */
udelay(6);
#endif
outb_p(ENISR_RDC, nic_base + EN0_ISR);
/* Now the normal output. */
outb_p(count & 0xff, nic_base + EN0_RCNTLO);
outb_p(count >> 8, nic_base + EN0_RCNTHI);
outb_p(0x00, nic_base + EN0_RSARLO);
outb_p(start_page, nic_base + EN0_RSARHI);
outb_p(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
if (ei_status.word16) {
outsw(NE_BASE + NE_DATAPORT, buf, count>>1);
} else {
outsb(NE_BASE + NE_DATAPORT, buf, count);
}
dma_start = jiffies;
#ifdef NE_SANITY_CHECK
/* This was for the ALPHA version only, but enough people have
been encountering problems so it is still here. */
if (ei_debug > 1)
{
/* DMA termination address check... */
int addr, tries = 20;
do {
int high = inb_p(nic_base + EN0_RSARHI);
int low = inb_p(nic_base + EN0_RSARLO);
addr = (high << 8) + low;
if ((start_page << 8) + count == addr)
break;
} while (--tries > 0);
if (tries <= 0)
{
printk(KERN_WARNING "%s: Tx packet transfer address mismatch,"
"%#4.4x (expected) vs. %#4.4x (actual).\n",
dev->name, (start_page << 8) + count, addr);
if (retries++ == 0)
goto retry;
}
}
#endif
while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
ne_reset_8390(dev);
NS8390_init(dev,1);
break;
}
outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
ei_status.dmaing &= ~0x01;
return;
}
#ifdef MODULE
#define MAX_NE_CARDS 4 /* Max number of NE cards per module */
static struct net_device dev_ne[MAX_NE_CARDS];
static int io[MAX_NE_CARDS];
static int irq[MAX_NE_CARDS];
static int bad[MAX_NE_CARDS]; /* 0xbad = bad sig or no reset ack */
static int hwtype[MAX_NE_CARDS] = { 0, }; /* board type */
MODULE_PARM(io, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
MODULE_PARM(irq, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
MODULE_PARM(bad, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
MODULE_PARM(hwtype, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
MODULE_PARM_DESC(io, "I/O base address(es),required");
MODULE_PARM_DESC(irq, "IRQ number(s)");
MODULE_PARM_DESC(bad, "Accept card(s) with bad signatures");
MODULE_PARM_DESC(hwtype, "Board type of PC-9800 C-Bus NIC");
MODULE_DESCRIPTION("NE1000/NE2000 PC-9800 C-bus Ethernet driver");
MODULE_LICENSE("GPL");
/* This is set up so that no ISA autoprobe takes place. We can't guarantee
that the ne2k probe is the last 8390 based probe to take place (as it
is at boot) and so the probe will get confused by any other 8390 cards.
ISA device autoprobes on a running machine are not recommended anyway. */
int init_module(void)
{
int this_dev, found = 0;
for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
struct net_device *dev = &dev_ne[this_dev];
dev->irq = irq[this_dev];
dev->mem_end = bad[this_dev];
dev->base_addr = io[this_dev];
dev->mem_start = hwtype[this_dev];
dev->init = ne_probe;
if (register_netdev(dev) == 0) {
found++;
continue;
}
if (found != 0) { /* Got at least one. */
return 0;
}
if (io[this_dev] != 0)
printk(KERN_WARNING "ne.c: No NE*000 card found at i/o = %#x\n", io[this_dev]);
else
printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\" value(s) for C-Bus cards.\n");
return -ENXIO;
}
return 0;
}
void cleanup_module(void)
{
int this_dev;
for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
struct net_device *dev = &dev_ne[this_dev];
if (dev->priv != NULL) {
const struct ne2k_cbus_region *rlist;
const struct ne2k_cbus_hwinfo *hw = ne2k_cbus_get_hwinfo((int)(dev->mem_start & NE2K_CBUS_HARDWARE_TYPE_MASK));
free_irq(dev->irq, dev);
for (rlist = hw->regionlist; rlist->range; rlist++) {
release_region(dev->base_addr + rlist->start,
rlist->range);
}
unregister_netdev(dev);
ne2k_cbus_destroy(dev);
}
}
}
#endif /* MODULE */
/*
* Local variables:
* compile-command: "gcc -DKERNEL -Wall -O6 -fomit-frame-pointer -I/usr/src/linux/net/tcp -c ne.c"
* version-control: t
* kept-new-versions: 5
* End:
*/
/* ne2k_cbus.h:
vender-specific information definition for NEC PC-9800
C-bus Ethernet Cards
Used in ne.c
(C)1998,1999 KITAGWA Takurou & Linux/98 project
*/
#include <linux/config.h>
#undef NE_RESET
#define NE_RESET EI_SHIFT(0x11) /* Issue a read to reset, a write to clear. */
#ifdef CONFIG_NE2K_CBUS_CNET98EL
#ifndef CONFIG_NE2K_CBUS_CNET98EL_IO_BASE
#warning CONFIG_NE2K_CBUS_CNET98EL_IO_BASE is not defined(config error?)
#warning use 0xaaed as default
#define CONFIG_NE2K_CBUS_CNET98EL_IO_BASE 0xaaed /* or 0x55ed */
#endif
#define CNET98EL_START_PG 0x00
#define CNET98EL_STOP_PG 0x40
#endif
/* Hardware type definition (derived from *BSD) */
#define NE2K_CBUS_HARDWARE_TYPE_MASK 0xff
/* 0: reserved for auto-detect */
/* 1: (not tested)
Allied Telesis CentreCom LA-98-T */
#define NE2K_CBUS_HARDWARE_TYPE_ATLA98 1
/* 2: (not tested)
ELECOM Laneed
LD-BDN[123]A
PLANET SMART COM 98 EN-2298-C
MACNICA ME98 */
#define NE2K_CBUS_HARDWARE_TYPE_BDN 2
/* 3:
Melco EGY-98
Contec C-NET(98)E*A/L*A,C-NET(98)P */
#define NE2K_CBUS_HARDWARE_TYPE_EGY98 3
/* 4:
Melco LGY-98,IND-SP,IND-SS
MACNICA NE2098 */
#define NE2K_CBUS_HARDWARE_TYPE_LGY98 4
/* 5:
ICM DT-ET-25,DT-ET-T5,IF-2766ET,IF-2771ET
PLANET SMART COM 98 EN-2298-T,EN-2298P-T
D-Link DE-298PT,DE-298PCAT
ELECOM Laneed LD-98P */
#define NE2K_CBUS_HARDWARE_TYPE_ICM 5
/* 6: (reserved for SIC-98, which is not supported in this driver.) */
/* 7: (unused in *BSD?)
<Original NE2000 compatible>
<for PCI/PCMCIA cards>
*/
#define NE2K_CBUS_HARDWARE_TYPE_NE2K 7
/* 8:
NEC PC-9801-108 */
#define NE2K_CBUS_HARDWARE_TYPE_NEC108 8
/* 9:
I-O DATA LA-98,LA/T-98 */
#define NE2K_CBUS_HARDWARE_TYPE_IOLA98 9
/* 10: (reserved for C-NET(98), which is not supported in this driver.) */
/* 11:
Contec C-NET(98)E,L */
#define NE2K_CBUS_HARDWARE_TYPE_CNET98EL 11
#define NE2K_CBUS_HARDWARE_TYPE_MAX 11
/* HARDWARE TYPE ID 12-31: reserved */
struct ne2k_cbus_offsetinfo {
unsigned short skip;
unsigned short offset8; /* +0x8 - +0xf */
unsigned short offset10; /* +0x10 */
unsigned short offset1f; /* +0x1f */
};
struct ne2k_cbus_region {
unsigned short start;
short range;
};
struct ne2k_cbus_hwinfo {
const unsigned short hwtype;
const unsigned char *hwident;
#ifndef MODULE
const unsigned short *portlist;
#endif
const struct ne2k_cbus_offsetinfo *offsetinfo;
const struct ne2k_cbus_region *regionlist;
};
#ifdef CONFIG_NE2K_CBUS_ATLA98
#ifndef MODULE
static unsigned short atla98_portlist[] __initdata = {
0xd0,
0
};
#endif
#define atla98_offsetinfo ne2k_offsetinfo
#define atla98_regionlist ne2k_regionlist
#endif /* CONFIG_NE2K_CBUS_ATLA98 */
#ifdef CONFIG_NE2K_CBUS_BDN
#ifndef MODULE
static unsigned short bdn_portlist[] __initdata = {
0xd0,
0
};
#endif
static struct ne2k_cbus_offsetinfo bdn_offsetinfo __initdata = {
#if 0
/* comes from FreeBSD(98) ed98.h */
0x1000, 0x8000, 0x100, 0xc200 /* ??? */
#else
/* comes from NetBSD/pc98 if_ne_isa.c */
0x1000, 0x8000, 0x100, 0x7f00 /* ??? */
#endif
};
static struct ne2k_cbus_region bdn_regionlist[] __initdata = {
{0x0, 1}, {0x1000, 1}, {0x2000, 1}, {0x3000,1},
{0x4000, 1}, {0x5000, 1}, {0x6000, 1}, {0x7000, 1},
{0x8000, 1}, {0x9000, 1}, {0xa000, 1}, {0xb000, 1},
{0xc000, 1}, {0xd000, 1}, {0xe000, 1}, {0xf000, 1},
{0x100, 1}, {0x7f00, 1},
{0x0, 0}
};
#endif /* CONFIG_NE2K_CBUS_BDN */
#ifdef CONFIG_NE2K_CBUS_EGY98
#ifndef MODULE
static unsigned short egy98_portlist[] __initdata = {
0xd0,
0
};
#endif
static struct ne2k_cbus_offsetinfo egy98_offsetinfo __initdata = {
0x02, 0x100, 0x200, 0x300
};
static struct ne2k_cbus_region egy98_regionlist[] __initdata = {
{0x0, 1}, {0x2, 1}, {0x4, 1}, {0x6, 1},
{0x8, 1}, {0xa, 1}, {0xc, 1}, {0xe, 1},
{0x100, 1}, {0x102, 1}, {0x104, 1}, {0x106, 1},
{0x108, 1}, {0x10a, 1}, {0x10c, 1}, {0x10e, 1},
{0x200, 1}, {0x300, 1},
{0x0, 0}
};
#endif /* CONFIG_NE2K_CBUS_EGY98 */
#ifdef CONFIG_NE2K_CBUS_LGY98
#ifndef MODULE
static unsigned short lgy98_portlist[] __initdata = {
0xd0, 0x10d0, 0x20d0, 0x30d0, 0x40d0, 0x50d0, 0x60d0, 0x70d0,
0
};
#endif
static struct ne2k_cbus_offsetinfo lgy98_offsetinfo __initdata = {
0x01, 0x08, 0x200, 0x300
};
static struct ne2k_cbus_region lgy98_regionlist[] __initdata = {
{0x0, 16}, {0x200, 1}, {0x300, 1},
{0x0, 0}
};
#endif /* CONFIG_NE2K_CBUS_LGY98 */
#ifdef CONFIG_NE2K_CBUS_ICM
#ifndef MODULE
static unsigned short icm_portlist[] __initdata = {
/* ICM */
0x56d0,
/* LD-98PT */
0x46d0, 0x66d0, 0x76d0, 0x86d0, 0x96d0, 0xa6d0, 0xb6d0, 0xc6d0,
0
};
#endif
static struct ne2k_cbus_offsetinfo icm_offsetinfo __initdata = {
0x01, 0x08, 0x100, 0x10f
};
static struct ne2k_cbus_region icm_regionlist[] __initdata = {
{0x0, 16}, {0x100, 16},
{0x0, 0}
};
#endif /* CONFIG_NE2K_CBUS_ICM */
#if defined(CONFIG_NE2K_CBUS_NE2K) && !defined(MODULE)
static unsigned short ne2k_portlist[] __initdata = {
0xd0, 0x300, 0x280, 0x320, 0x340, 0x360, 0x380,
0
};
#endif
#if defined(CONFIG_NE2K_CBUS_NE2K) || defined(CONFIG_NE2K_CBUS_ATLA98)
static struct ne2k_cbus_offsetinfo ne2k_offsetinfo __initdata = {
0x01, 0x08, 0x10, 0x1f
};
static struct ne2k_cbus_region ne2k_regionlist[] __initdata = {
{0x0, 32},
{0x0, 0}
};
#endif
#ifdef CONFIG_NE2K_CBUS_NEC108
#ifndef MODULE
static unsigned short nec108_portlist[] __initdata = {
0x770, 0x2770, 0x4770, 0x6770,
0
};
#endif
static struct ne2k_cbus_offsetinfo nec108_offsetinfo __initdata = {
0x02, 0x1000, 0x888, 0x88a
};
static struct ne2k_cbus_region nec108_regionlist[] __initdata = {
{0x0, 1}, {0x2, 1}, {0x4, 1}, {0x6, 1},
{0x8, 1}, {0xa, 1}, {0xc, 1}, {0xe, 1},
{0x1000, 1}, {0x1002, 1}, {0x1004, 1}, {0x1006, 1},
{0x1008, 1}, {0x100a, 1}, {0x100c, 1}, {0x100e, 1},
{0x888, 1}, {0x88a, 1}, {0x88c, 1}, {0x88e, 1},
{0x0, 0}
};
#endif
#ifdef CONFIG_NE2K_CBUS_IOLA98
#ifndef MODULE
static unsigned short iola98_portlist[] __initdata = {
0xd0, 0xd2, 0xd4, 0xd6, 0xd8, 0xda, 0xdc, 0xde,
0
};
#endif
static struct ne2k_cbus_offsetinfo iola98_offsetinfo __initdata = {
0x1000, 0x8000, 0x100, 0xf100
};
static struct ne2k_cbus_region iola98_regionlist[] __initdata = {
{0x0, 1}, {0x1000, 1}, {0x2000, 1}, {0x3000, 1},
{0x4000, 1}, {0x5000, 1}, {0x6000, 1}, {0x7000, 1},
{0x8000, 1}, {0x9000, 1}, {0xa000, 1}, {0xb000, 1},
{0xc000, 1}, {0xd000, 1}, {0xe000, 1}, {0xf000, 1},
{0x100, 1}, {0xf100, 1},
{0x0,0}
};
#endif /* CONFIG_NE2K_CBUS_IOLA98 */
#ifdef CONFIG_NE2K_CBUS_CNET98EL
#ifndef MODULE
static unsigned short cnet98el_portlist[] __initdata = {
0x3d0, 0x13d0, 0x23d0, 0x33d0, 0x43d0, 0x53d0, 0x60d0, 0x70d0,
0
};
#endif
static struct ne2k_cbus_offsetinfo cnet98el_offsetinfo __initdata = {
0x01, 0x08, 0x40e, 0x400
};
static struct ne2k_cbus_region cnet98el_regionlist[] __initdata = {
{0x0, 16}, {0x400, 16},
{0x0, 0}
};
#endif
/* port information table (for ne.c initialize/probe process) */
static struct ne2k_cbus_hwinfo ne2k_cbus_hwinfo_list[] __initdata = {
#ifdef CONFIG_NE2K_CBUS_ATLA98
/* NOT TESTED */
{
NE2K_CBUS_HARDWARE_TYPE_ATLA98,
"LA-98-T",
#ifndef MODULE
atla98_portlist,
#endif
&atla98_offsetinfo, atla98_regionlist
},
#endif
#ifdef CONFIG_NE2K_CBUS_BDN
/* NOT TESTED */
{
NE2K_CBUS_HARDWARE_TYPE_BDN,
"LD-BDN[123]A",
#ifndef MODULE
bdn_portlist,
#endif
&bdn_offsetinfo, bdn_regionlist
},
#endif
#ifdef CONFIG_NE2K_CBUS_ICM
{
NE2K_CBUS_HARDWARE_TYPE_ICM,
"IF-27xxET",
#ifndef MODULE
icm_portlist,
#endif
&icm_offsetinfo, icm_regionlist
},
#endif
#ifdef CONFIG_NE2K_CBUS_NE2K
{
NE2K_CBUS_HARDWARE_TYPE_NE2K,
"NE2000 compat.",
#ifndef MODULE
ne2k_portlist,
#endif
&ne2k_offsetinfo, ne2k_regionlist
},
#endif
#ifdef CONFIG_NE2K_CBUS_NEC108
{
NE2K_CBUS_HARDWARE_TYPE_NEC108,
"PC-9801-108",
#ifndef MODULE
nec108_portlist,
#endif
&nec108_offsetinfo, nec108_regionlist
},
#endif
#ifdef CONFIG_NE2K_CBUS_IOLA98
{
NE2K_CBUS_HARDWARE_TYPE_IOLA98,
"LA-98",
#ifndef MODULE
iola98_portlist,
#endif
&iola98_offsetinfo, iola98_regionlist
},
#endif
#ifdef CONFIG_NE2K_CBUS_CNET98EL
{
NE2K_CBUS_HARDWARE_TYPE_CNET98EL,
"C-NET(98)E/L",
#ifndef MODULE
cnet98el_portlist,
#endif
&cnet98el_offsetinfo, cnet98el_regionlist
},
#endif
/* NOTE: LGY98 must be probed before EGY98, or system stalled!? */
#ifdef CONFIG_NE2K_CBUS_LGY98
{
NE2K_CBUS_HARDWARE_TYPE_LGY98,
"LGY-98",
#ifndef MODULE
lgy98_portlist,
#endif
&lgy98_offsetinfo, lgy98_regionlist
},
#endif
#ifdef CONFIG_NE2K_CBUS_EGY98
{
NE2K_CBUS_HARDWARE_TYPE_EGY98,
"EGY-98",
#ifndef MODULE
egy98_portlist,
#endif
&egy98_offsetinfo, egy98_regionlist
},
#endif
{
0,
"unsupported hardware",
#ifndef MODULE
NULL,
#endif
NULL, NULL
}
};
static int __init ne2k_cbus_init(struct net_device *dev)
{
struct ei_device *ei_local;
if (dev->priv == NULL) {
ei_local = kmalloc(sizeof(struct ei_device), GFP_KERNEL);
if (ei_local == NULL)
return -ENOMEM;
memset(ei_local, 0, sizeof(struct ei_device));
ei_local->reg_offset = kmalloc(sizeof(typeof(*ei_local->reg_offset))*18, GFP_KERNEL);
if (ei_local->reg_offset == NULL) {
kfree(ei_local);
return -ENOMEM;
}
spin_lock_init(&ei_local->page_lock);
dev->priv = ei_local;
}
return 0;
}
static void ne2k_cbus_destroy(struct net_device *dev)
{
struct ei_device *ei_local = (struct ei_device *)(dev->priv);
if (ei_local != NULL) {
if (ei_local->reg_offset)
kfree(ei_local->reg_offset);
kfree(dev->priv);
dev->priv = NULL;
}
}
static const struct ne2k_cbus_hwinfo * __init ne2k_cbus_get_hwinfo(int hwtype)
{
const struct ne2k_cbus_hwinfo *hw;
for (hw = &ne2k_cbus_hwinfo_list[0]; hw->hwtype; hw++) {
if (hw->hwtype == hwtype) break;
}
return hw;
}
static void __init ne2k_cbus_set_hwtype(struct net_device *dev, const struct ne2k_cbus_hwinfo *hw, int ioaddr)
{
struct ei_device *ei_local = (struct ei_device *)(dev->priv);
int i;
int hwtype_old = dev->mem_start & NE2K_CBUS_HARDWARE_TYPE_MASK;
if (!ei_local)
panic("Gieee! ei_local == NULL!! (from %p)",
__builtin_return_address(0));
dev->mem_start &= ~NE2K_CBUS_HARDWARE_TYPE_MASK;
dev->mem_start |= hw->hwtype & NE2K_CBUS_HARDWARE_TYPE_MASK;
if (ei_debug > 2) {
printk(KERN_DEBUG "hwtype changed: %d -> %d\n",hwtype_old,(int)(dev->mem_start & NE2K_CBUS_HARDWARE_TYPE_MASK));
}
if (hw->offsetinfo) {
for (i = 0; i < 8; i++) {
ei_local->reg_offset[i] = hw->offsetinfo->skip * i;
}
for (i = 8; i < 16; i++) {
ei_local->reg_offset[i] =
hw->offsetinfo->skip*(i-8) + hw->offsetinfo->offset8;
}
#ifdef CONFIG_NE2K_CBUS_NEC108
if (hw->hwtype == NE2K_CBUS_HARDWARE_TYPE_NEC108) {
int adj = (ioaddr & 0xf000) /2;
ei_local->reg_offset[16] =
(hw->offsetinfo->offset10 | adj) - ioaddr;
ei_local->reg_offset[17] =
(hw->offsetinfo->offset1f | adj) - ioaddr;
} else {
#endif /* CONFIG_NE2K_CBUS_NEC108 */
ei_local->reg_offset[16] = hw->offsetinfo->offset10;
ei_local->reg_offset[17] = hw->offsetinfo->offset1f;
#ifdef CONFIG_NE2K_CBUS_NEC108
}
#endif
} else {
/* make dummmy offset list */
for (i = 0; i < 16; i++) {
ei_local->reg_offset[i] = i;
}
ei_local->reg_offset[16] = 0x10;
ei_local->reg_offset[17] = 0x1f;
}
}
#if defined(CONFIG_NE2K_CBUS_ICM) || defined(CONFIG_NE2K_CBUS_CNET98EL)
static void __init ne2k_cbus_readmem(struct net_device *dev, int ioaddr, unsigned short memaddr, char *buf, unsigned short len)
{
struct ei_device *ei_local = (struct ei_device *)(dev->priv);
outb_p(E8390_NODMA | E8390_START, ioaddr+E8390_CMD);
outb_p(len & 0xff, ioaddr+EN0_RCNTLO);
outb_p(len >> 8, ioaddr+EN0_RCNTHI);
outb_p(memaddr & 0xff, ioaddr+EN0_RSARLO);
outb_p(memaddr >> 8, ioaddr+EN0_RSARHI);
outb_p(E8390_RREAD | E8390_START, ioaddr+E8390_CMD);
insw(ioaddr+NE_DATAPORT, buf, len >> 1);
}
static void __init ne2k_cbus_writemem(struct net_device *dev, int ioaddr, unsigned short memaddr, const char *buf, unsigned short len)
{
struct ei_device *ei_local = (struct ei_device *)(dev->priv);
outb_p(E8390_NODMA | E8390_START, ioaddr+E8390_CMD);
outb_p(ENISR_RDC, ioaddr+EN0_ISR);
outb_p(len & 0xff, ioaddr+EN0_RCNTLO);
outb_p(len >> 8, ioaddr+EN0_RCNTHI);
outb_p(memaddr & 0xff, ioaddr+EN0_RSARLO);
outb_p(memaddr >> 8, ioaddr+EN0_RSARHI);
outb_p(E8390_RWRITE | E8390_START, ioaddr+E8390_CMD);
outsw(ioaddr+NE_DATAPORT, buf, len >> 1);
}
#endif
static int ne_probe_cbus(struct net_device *dev, const struct ne2k_cbus_hwinfo *hw, int ioaddr);
/* End of ne2k_cbus.h */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment