Merge tag 'fixes-for-v4.14-rc2' of...

Merge tag 'fixes-for-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.14-rc2

First set of fixes for the gadget side. Not much this time around,
things have been rather calm.

In no order whatsoever, this pull request contains:

- A DMA starvation fix on dwc3 caused by some recent changes to how we
  map/unmap requests

- A build error fix on the snps_udc_plat.c driver

- A fix for how to we call ->udc_set_speed()

- Spinlock recursion fix on the printer gadget

- Removal of pointless comparisons on dummy driver

drivers/usb/dwc3/ep0.c

@@ -990,6 +990,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 					 DWC3_TRBCTL_CONTROL_DATA,
 					 true);
 
+		req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
+
 		/* Now prepare one extra TRB to align transfer size */
 		dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
 					 maxpacket - rem,
@@ -1015,6 +1017,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 					 DWC3_TRBCTL_CONTROL_DATA,
 					 true);
 
+		req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
+
 		/* Now prepare one extra TRB to align transfer size */
 		dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
 					 0, DWC3_TRBCTL_CONTROL_DATA,
@@ -1029,6 +1033,9 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		dwc3_ep0_prepare_one_trb(dep, req->request.dma,
 				req->request.length, DWC3_TRBCTL_CONTROL_DATA,
 				false);
+
+		req->trb = &dwc->ep0_trb[dep->trb_enqueue];
+
 		ret = dwc3_ep0_start_trans(dep);
 	}
 

drivers/usb/gadget/function/f_printer.c

@@ -555,6 +555,7 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	size_t			size;	/* Amount of data in a TX request. */
 	size_t			bytes_copied = 0;
 	struct usb_request	*req;
+	int			value;
 
 	DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
 
@@ -634,7 +635,11 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 			return -EAGAIN;
 		}
 
-		if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
+		/* here, we unlock, and only unlock, to avoid deadlock. */
+		spin_unlock(&dev->lock);
+		value = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC);
+		spin_lock(&dev->lock);
+		if (value) {
 			list_add(&req->list, &dev->tx_reqs);
 			spin_unlock_irqrestore(&dev->lock, flags);
 			mutex_unlock(&dev->lock_printer_io);

drivers/usb/gadget/udc/Kconfig

@@ -273,6 +273,7 @@ config USB_SNP_CORE
 config USB_SNP_UDC_PLAT
 	tristate "Synopsys USB 2.0 Device controller"
 	depends on USB_GADGET && OF && HAS_DMA
+	depends on EXTCON || EXTCON=n
 	select USB_GADGET_DUALSPEED
 	select USB_SNP_CORE
 	default ARCH_BCM_IPROC

drivers/usb/gadget/udc/core.c

@@ -1320,7 +1320,6 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri
 	udc->dev.driver = &driver->driver;
 	udc->gadget->dev.driver = &driver->driver;
 
-	if (driver->max_speed < udc->gadget->max_speed)
 	usb_gadget_udc_set_speed(udc, driver->max_speed);
 
 	ret = driver->bind(udc->gadget, driver);

drivers/usb/gadget/udc/dummy_hcd.c

@@ -375,10 +375,9 @@ static void set_link_state_by_speed(struct dummy_hcd *dum_hcd)
 			     USB_PORT_STAT_CONNECTION) == 0)
 				dum_hcd->port_status |=
 					(USB_PORT_STAT_C_CONNECTION << 16);
-			if ((dum_hcd->port_status &
-			     USB_PORT_STAT_ENABLE) == 1 &&
+			if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) &&
 			    (dum_hcd->port_status &
-				 USB_SS_PORT_LS_U0) == 1 &&
+			     USB_PORT_STAT_LINK_STATE) == USB_SS_PORT_LS_U0 &&
 			    dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
 				dum_hcd->active = 1;
 		}