ARM: dts: imx27 phyCARD-S pinctrl

Add pinctrl nodes and properties for phyCARD-S device nodes.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts

@@ -57,6 +57,8 @@ &fb {
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
 	rtc@51 {
@@ -71,7 +73,53 @@ adc@64 {
 	};
 };
 
+&iomuxc {
+	imx27-phycard-s-rdk {
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_owire1: owire1grp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE 0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD 0x0
+				MX27_PAD_UART3_RXD__UART3_RXD 0x0
+				MX27_PAD_UART3_CTS__UART3_CTS 0x0
+				MX27_PAD_UART3_RTS__UART3_RTS 0x0
+			>;
+		};
+	};
+};
+
 &owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire1>;
 	status = "okay";
 };
 
@@ -82,15 +130,21 @@ &sdhci2 {
 
 &uart1 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
 &uart3 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 };

arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts

@@ -29,11 +29,49 @@ &cspi1 {
 	status = "okay";
 };
 
+&iomuxc {
+	imx27-phycard-s-som {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+	};
+};
+
 &fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
 	status = "okay";
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
 	at24@52 {

arch/arm/boot/dts/imx27.dtsi

@@ -10,6 +10,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "imx27-pinfunc.h"
 
 / {
 	aliases {