Commit 62094060 authored by Cosmin Tanislav's avatar Cosmin Tanislav Committed by Jonathan Cameron

iio: adc: ad4130: add AD4130 driver

AD4130-8 is an ultra-low power, high precision, measurement solution for
low bandwidth battery operated applications.

The fully integrated AFE (Analog Front-End) includes a multiplexer for up
to 16 single-ended or 8 differential inputs, PGA (Programmable Gain
Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator,
selectable filter options, smart sequencer, sensor biasing and excitation
options, diagnostics, and a FIFO buffer.
Signed-off-by: default avatarCosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: default avatarAndy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20221021104115.1812486-3-demonsingur@gmail.comSigned-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 36a4df50
What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available
KernelVersion: 6.2
Contact: linux-iio@vger.kernel.org
Description:
Reading returns a list with the possible filter modes.
"sinc4" - Sinc 4. Excellent noise performance. Long 1st
conversion time. No natural 50/60Hz rejection.
"sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion time.
"sinc3" - Sinc3. Moderate 1st conversion time. Good noise
performance.
"sinc3+rej60" - Sinc3 + 60Hz rejection. At a sampling frequency
of 50Hz, achieves simultaneous 50Hz and 60Hz
rejection.
"sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion time.
Best used with a sampling frequency of at least
216.19Hz.
"sinc3+pf1" - Sinc3 + Post Filter 1.
53dB rejection @ 50Hz, 58dB rejection @ 60Hz.
"sinc3+pf2" - Sinc3 + Post Filter 2.
70dB rejection @ 50Hz, 70dB rejection @ 60Hz.
"sinc3+pf3" - Sinc3 + Post Filter 3.
99dB rejection @ 50Hz, 103dB rejection @ 60Hz.
"sinc3+pf4" - Sinc3 + Post Filter 4.
103dB rejection @ 50Hz, 109dB rejection @ 60Hz.
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_filter_mode
KernelVersion: 6.2
Contact: linux-iio@vger.kernel.org
Description:
Set the filter mode of the differential channel. When the filter
mode changes, the in_voltageY-voltageZ_sampling_frequency and
in_voltageY-voltageZ_sampling_frequency_available attributes
might also change to accommodate the new filter mode.
If the current sampling frequency is out of range for the new
filter mode, the sampling frequency will be changed to the
closest valid one.
......@@ -1122,7 +1122,9 @@ M: Cosmin Tanislav <cosmin.tanislav@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
F: Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
F: drivers/iio/adc/ad4130.c
ANALOG DEVICES INC AD7192 DRIVER
M: Alexandru Tachici <alexandru.tachici@analog.com>
......
......@@ -21,6 +21,20 @@ config AD_SIGMA_DELTA
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
config AD4130
tristate "Analog Device AD4130 ADC Driver"
depends on SPI
select IIO_BUFFER
select IIO_KFIFO_BUF
select REGMAP_SPI
depends on COMMON_CLK
help
Say yes here to build support for Analog Devices AD4130-8 SPI analog
to digital converters (ADC).
To compile this driver as a module, choose M here: the module will be
called ad4130.
config AD7091R5
tristate "Analog Devices AD7091R5 ADC Driver"
depends on I2C
......
......@@ -6,6 +6,7 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
obj-$(CONFIG_AD4130) += ad4130.o
obj-$(CONFIG_AD7091R5) += ad7091r5.o ad7091r-base.o
obj-$(CONFIG_AD7124) += ad7124.o
obj-$(CONFIG_AD7192) += ad7192.o
......
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2022 Analog Devices, Inc.
* Author: Cosmin Tanislav <cosmin.tanislav@analog.com>
*/
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <linux/units.h>
#include <asm/div64.h>
#include <asm/unaligned.h>
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/sysfs.h>
#define AD4130_NAME "ad4130"
#define AD4130_COMMS_READ_MASK BIT(6)
#define AD4130_STATUS_REG 0x00
#define AD4130_ADC_CONTROL_REG 0x01
#define AD4130_ADC_CONTROL_BIPOLAR_MASK BIT(14)
#define AD4130_ADC_CONTROL_INT_REF_VAL_MASK BIT(13)
#define AD4130_INT_REF_2_5V 2500000
#define AD4130_INT_REF_1_25V 1250000
#define AD4130_ADC_CONTROL_CSB_EN_MASK BIT(9)
#define AD4130_ADC_CONTROL_INT_REF_EN_MASK BIT(8)
#define AD4130_ADC_CONTROL_MODE_MASK GENMASK(5, 2)
#define AD4130_ADC_CONTROL_MCLK_SEL_MASK GENMASK(1, 0)
#define AD4130_MCLK_FREQ_76_8KHZ 76800
#define AD4130_MCLK_FREQ_153_6KHZ 153600
#define AD4130_DATA_REG 0x02
#define AD4130_IO_CONTROL_REG 0x03
#define AD4130_IO_CONTROL_INT_PIN_SEL_MASK GENMASK(9, 8)
#define AD4130_IO_CONTROL_GPIO_DATA_MASK GENMASK(7, 4)
#define AD4130_IO_CONTROL_GPIO_CTRL_MASK GENMASK(3, 0)
#define AD4130_VBIAS_REG 0x04
#define AD4130_ID_REG 0x05
#define AD4130_ERROR_REG 0x06
#define AD4130_ERROR_EN_REG 0x07
#define AD4130_MCLK_COUNT_REG 0x08
#define AD4130_CHANNEL_X_REG(x) (0x09 + (x))
#define AD4130_CHANNEL_EN_MASK BIT(23)
#define AD4130_CHANNEL_SETUP_MASK GENMASK(22, 20)
#define AD4130_CHANNEL_AINP_MASK GENMASK(17, 13)
#define AD4130_CHANNEL_AINM_MASK GENMASK(12, 8)
#define AD4130_CHANNEL_IOUT1_MASK GENMASK(7, 4)
#define AD4130_CHANNEL_IOUT2_MASK GENMASK(3, 0)
#define AD4130_CONFIG_X_REG(x) (0x19 + (x))
#define AD4130_CONFIG_IOUT1_VAL_MASK GENMASK(15, 13)
#define AD4130_CONFIG_IOUT2_VAL_MASK GENMASK(12, 10)
#define AD4130_CONFIG_BURNOUT_MASK GENMASK(9, 8)
#define AD4130_CONFIG_REF_BUFP_MASK BIT(7)
#define AD4130_CONFIG_REF_BUFM_MASK BIT(6)
#define AD4130_CONFIG_REF_SEL_MASK GENMASK(5, 4)
#define AD4130_CONFIG_PGA_MASK GENMASK(3, 1)
#define AD4130_FILTER_X_REG(x) (0x21 + (x))
#define AD4130_FILTER_MODE_MASK GENMASK(15, 12)
#define AD4130_FILTER_SELECT_MASK GENMASK(10, 0)
#define AD4130_FILTER_SELECT_MIN 1
#define AD4130_OFFSET_X_REG(x) (0x29 + (x))
#define AD4130_GAIN_X_REG(x) (0x31 + (x))
#define AD4130_MISC_REG 0x39
#define AD4130_FIFO_CONTROL_REG 0x3a
#define AD4130_FIFO_CONTROL_HEADER_MASK BIT(18)
#define AD4130_FIFO_CONTROL_MODE_MASK GENMASK(17, 16)
#define AD4130_FIFO_CONTROL_WM_INT_EN_MASK BIT(9)
#define AD4130_FIFO_CONTROL_WM_MASK GENMASK(7, 0)
#define AD4130_WATERMARK_256 0
#define AD4130_FIFO_STATUS_REG 0x3b
#define AD4130_FIFO_THRESHOLD_REG 0x3c
#define AD4130_FIFO_DATA_REG 0x3d
#define AD4130_FIFO_SIZE 256
#define AD4130_FIFO_MAX_SAMPLE_SIZE 3
#define AD4130_MAX_ANALOG_PINS 16
#define AD4130_MAX_CHANNELS 16
#define AD4130_MAX_DIFF_INPUTS 30
#define AD4130_MAX_GPIOS 4
#define AD4130_MAX_ODR 2400
#define AD4130_MAX_PGA 8
#define AD4130_MAX_SETUPS 8
#define AD4130_AIN2_P1 0x2
#define AD4130_AIN3_P2 0x3
#define AD4130_RESET_BUF_SIZE 8
#define AD4130_RESET_SLEEP_US (160 * MICRO / AD4130_MCLK_FREQ_76_8KHZ)
#define AD4130_INVALID_SLOT -1
static const unsigned int ad4130_reg_size[] = {
[AD4130_STATUS_REG] = 1,
[AD4130_ADC_CONTROL_REG] = 2,
[AD4130_DATA_REG] = 3,
[AD4130_IO_CONTROL_REG] = 2,
[AD4130_VBIAS_REG] = 2,
[AD4130_ID_REG] = 1,
[AD4130_ERROR_REG] = 2,
[AD4130_ERROR_EN_REG] = 2,
[AD4130_MCLK_COUNT_REG] = 1,
[AD4130_CHANNEL_X_REG(0) ... AD4130_CHANNEL_X_REG(AD4130_MAX_CHANNELS - 1)] = 3,
[AD4130_CONFIG_X_REG(0) ... AD4130_CONFIG_X_REG(AD4130_MAX_SETUPS - 1)] = 2,
[AD4130_FILTER_X_REG(0) ... AD4130_FILTER_X_REG(AD4130_MAX_SETUPS - 1)] = 3,
[AD4130_OFFSET_X_REG(0) ... AD4130_OFFSET_X_REG(AD4130_MAX_SETUPS - 1)] = 3,
[AD4130_GAIN_X_REG(0) ... AD4130_GAIN_X_REG(AD4130_MAX_SETUPS - 1)] = 3,
[AD4130_MISC_REG] = 2,
[AD4130_FIFO_CONTROL_REG] = 3,
[AD4130_FIFO_STATUS_REG] = 1,
[AD4130_FIFO_THRESHOLD_REG] = 3,
[AD4130_FIFO_DATA_REG] = 3,
};
enum ad4130_int_ref_val {
AD4130_INT_REF_VAL_2_5V,
AD4130_INT_REF_VAL_1_25V,
};
enum ad4130_mclk_sel {
AD4130_MCLK_76_8KHZ,
AD4130_MCLK_76_8KHZ_OUT,
AD4130_MCLK_76_8KHZ_EXT,
AD4130_MCLK_153_6KHZ_EXT,
};
enum ad4130_int_pin_sel {
AD4130_INT_PIN_INT,
AD4130_INT_PIN_CLK,
AD4130_INT_PIN_P2,
AD4130_INT_PIN_DOUT,
};
enum ad4130_iout {
AD4130_IOUT_OFF,
AD4130_IOUT_10000NA,
AD4130_IOUT_20000NA,
AD4130_IOUT_50000NA,
AD4130_IOUT_100000NA,
AD4130_IOUT_150000NA,
AD4130_IOUT_200000NA,
AD4130_IOUT_100NA,
AD4130_IOUT_MAX
};
enum ad4130_burnout {
AD4130_BURNOUT_OFF,
AD4130_BURNOUT_500NA,
AD4130_BURNOUT_2000NA,
AD4130_BURNOUT_4000NA,
AD4130_BURNOUT_MAX
};
enum ad4130_ref_sel {
AD4130_REF_REFIN1,
AD4130_REF_REFIN2,
AD4130_REF_REFOUT_AVSS,
AD4130_REF_AVDD_AVSS,
AD4130_REF_SEL_MAX
};
enum ad4130_fifo_mode {
AD4130_FIFO_MODE_DISABLED = 0b00,
AD4130_FIFO_MODE_WM = 0b01,
};
enum ad4130_mode {
AD4130_MODE_CONTINUOUS = 0b0000,
AD4130_MODE_IDLE = 0b0100,
};
enum ad4130_filter_mode {
AD4130_FILTER_SINC4,
AD4130_FILTER_SINC4_SINC1,
AD4130_FILTER_SINC3,
AD4130_FILTER_SINC3_REJ60,
AD4130_FILTER_SINC3_SINC1,
AD4130_FILTER_SINC3_PF1,
AD4130_FILTER_SINC3_PF2,
AD4130_FILTER_SINC3_PF3,
AD4130_FILTER_SINC3_PF4,
};
enum ad4130_pin_function {
AD4130_PIN_FN_NONE,
AD4130_PIN_FN_SPECIAL = BIT(0),
AD4130_PIN_FN_DIFF = BIT(1),
AD4130_PIN_FN_EXCITATION = BIT(2),
AD4130_PIN_FN_VBIAS = BIT(3),
};
struct ad4130_setup_info {
unsigned int iout0_val;
unsigned int iout1_val;
unsigned int burnout;
unsigned int pga;
unsigned int fs;
u32 ref_sel;
enum ad4130_filter_mode filter_mode;
bool ref_bufp;
bool ref_bufm;
};
struct ad4130_slot_info {
struct ad4130_setup_info setup;
unsigned int enabled_channels;
unsigned int channels;
};
struct ad4130_chan_info {
struct ad4130_setup_info setup;
u32 iout0;
u32 iout1;
int slot;
bool enabled;
bool initialized;
};
struct ad4130_filter_config {
enum ad4130_filter_mode filter_mode;
unsigned int odr_div;
unsigned int fs_max;
enum iio_available_type samp_freq_avail_type;
int samp_freq_avail_len;
int samp_freq_avail[3][2];
};
struct ad4130_state {
struct regmap *regmap;
struct spi_device *spi;
struct clk *mclk;
struct regulator_bulk_data regulators[4];
u32 irq_trigger;
u32 inv_irq_trigger;
/*
* Synchronize access to members the of driver state, and ensure
* atomicity of consecutive regmap operations.
*/
struct mutex lock;
struct completion completion;
struct iio_chan_spec chans[AD4130_MAX_CHANNELS];
struct ad4130_chan_info chans_info[AD4130_MAX_CHANNELS];
struct ad4130_slot_info slots_info[AD4130_MAX_SETUPS];
enum ad4130_pin_function pins_fn[AD4130_MAX_ANALOG_PINS];
u32 vbias_pins[AD4130_MAX_ANALOG_PINS];
u32 num_vbias_pins;
int scale_tbls[AD4130_REF_SEL_MAX][AD4130_MAX_PGA][2];
struct gpio_chip gc;
struct clk_hw int_clk_hw;
u32 int_pin_sel;
u32 int_ref_uv;
u32 mclk_sel;
bool int_ref_en;
bool bipolar;
unsigned int num_enabled_channels;
unsigned int effective_watermark;
unsigned int watermark;
struct spi_message fifo_msg;
struct spi_transfer fifo_xfer[2];
/*
* DMA (thus cache coherency maintenance) requires any transfer
* buffers to live in their own cache lines. As the use of these
* buffers is synchronous, all of the buffers used for DMA in this
* driver may share a cache line.
*/
u8 reset_buf[AD4130_RESET_BUF_SIZE] __aligned(IIO_DMA_MINALIGN);
u8 reg_write_tx_buf[4];
u8 reg_read_tx_buf[1];
u8 reg_read_rx_buf[3];
u8 fifo_tx_buf[2];
u8 fifo_rx_buf[AD4130_FIFO_SIZE *
AD4130_FIFO_MAX_SAMPLE_SIZE];
};
static const char * const ad4130_int_pin_names[] = {
[AD4130_INT_PIN_INT] = "int",
[AD4130_INT_PIN_CLK] = "clk",
[AD4130_INT_PIN_P2] = "p2",
[AD4130_INT_PIN_DOUT] = "dout",
};
static const unsigned int ad4130_iout_current_na_tbl[AD4130_IOUT_MAX] = {
[AD4130_IOUT_OFF] = 0,
[AD4130_IOUT_100NA] = 100,
[AD4130_IOUT_10000NA] = 10000,
[AD4130_IOUT_20000NA] = 20000,
[AD4130_IOUT_50000NA] = 50000,
[AD4130_IOUT_100000NA] = 100000,
[AD4130_IOUT_150000NA] = 150000,
[AD4130_IOUT_200000NA] = 200000,
};
static const unsigned int ad4130_burnout_current_na_tbl[AD4130_BURNOUT_MAX] = {
[AD4130_BURNOUT_OFF] = 0,
[AD4130_BURNOUT_500NA] = 500,
[AD4130_BURNOUT_2000NA] = 2000,
[AD4130_BURNOUT_4000NA] = 4000,
};
#define AD4130_VARIABLE_ODR_CONFIG(_filter_mode, _odr_div, _fs_max) \
{ \
.filter_mode = (_filter_mode), \
.odr_div = (_odr_div), \
.fs_max = (_fs_max), \
.samp_freq_avail_type = IIO_AVAIL_RANGE, \
.samp_freq_avail = { \
{ AD4130_MAX_ODR, (_odr_div) * (_fs_max) }, \
{ AD4130_MAX_ODR, (_odr_div) * (_fs_max) }, \
{ AD4130_MAX_ODR, (_odr_div) }, \
}, \
}
#define AD4130_FIXED_ODR_CONFIG(_filter_mode, _odr_div) \
{ \
.filter_mode = (_filter_mode), \
.odr_div = (_odr_div), \
.fs_max = AD4130_FILTER_SELECT_MIN, \
.samp_freq_avail_type = IIO_AVAIL_LIST, \
.samp_freq_avail_len = 1, \
.samp_freq_avail = { \
{ AD4130_MAX_ODR, (_odr_div) }, \
}, \
}
static const struct ad4130_filter_config ad4130_filter_configs[] = {
AD4130_VARIABLE_ODR_CONFIG(AD4130_FILTER_SINC4, 1, 10),
AD4130_VARIABLE_ODR_CONFIG(AD4130_FILTER_SINC4_SINC1, 11, 10),
AD4130_VARIABLE_ODR_CONFIG(AD4130_FILTER_SINC3, 1, 2047),
AD4130_VARIABLE_ODR_CONFIG(AD4130_FILTER_SINC3_REJ60, 1, 2047),
AD4130_VARIABLE_ODR_CONFIG(AD4130_FILTER_SINC3_SINC1, 10, 2047),
AD4130_FIXED_ODR_CONFIG(AD4130_FILTER_SINC3_PF1, 92),
AD4130_FIXED_ODR_CONFIG(AD4130_FILTER_SINC3_PF2, 100),
AD4130_FIXED_ODR_CONFIG(AD4130_FILTER_SINC3_PF3, 124),
AD4130_FIXED_ODR_CONFIG(AD4130_FILTER_SINC3_PF4, 148),
};
static const char * const ad4130_filter_modes_str[] = {
[AD4130_FILTER_SINC4] = "sinc4",
[AD4130_FILTER_SINC4_SINC1] = "sinc4+sinc1",
[AD4130_FILTER_SINC3] = "sinc3",
[AD4130_FILTER_SINC3_REJ60] = "sinc3+rej60",
[AD4130_FILTER_SINC3_SINC1] = "sinc3+sinc1",
[AD4130_FILTER_SINC3_PF1] = "sinc3+pf1",
[AD4130_FILTER_SINC3_PF2] = "sinc3+pf2",
[AD4130_FILTER_SINC3_PF3] = "sinc3+pf3",
[AD4130_FILTER_SINC3_PF4] = "sinc3+pf4",
};
static int ad4130_get_reg_size(struct ad4130_state *st, unsigned int reg,
unsigned int *size)
{
if (reg >= ARRAY_SIZE(ad4130_reg_size))
return -EINVAL;
*size = ad4130_reg_size[reg];
return 0;
}
static unsigned int ad4130_data_reg_size(struct ad4130_state *st)
{
unsigned int data_reg_size;
int ret;
ret = ad4130_get_reg_size(st, AD4130_DATA_REG, &data_reg_size);
if (ret)
return 0;
return data_reg_size;
}
static unsigned int ad4130_resolution(struct ad4130_state *st)
{
return ad4130_data_reg_size(st) * BITS_PER_BYTE;
}
static int ad4130_reg_write(void *context, unsigned int reg, unsigned int val)
{
struct ad4130_state *st = context;
unsigned int size;
int ret;
ret = ad4130_get_reg_size(st, reg, &size);
if (ret)
return ret;
st->reg_write_tx_buf[0] = reg;
switch (size) {
case 3:
put_unaligned_be24(val, &st->reg_write_tx_buf[1]);
break;
case 2:
put_unaligned_be16(val, &st->reg_write_tx_buf[1]);
break;
case 1:
st->reg_write_tx_buf[1] = val;
break;
default:
return -EINVAL;
}
return spi_write(st->spi, st->reg_write_tx_buf, size + 1);
}
static int ad4130_reg_read(void *context, unsigned int reg, unsigned int *val)
{
struct ad4130_state *st = context;
struct spi_transfer t[] = {
{
.tx_buf = st->reg_read_tx_buf,
.len = sizeof(st->reg_read_tx_buf),
},
{
.rx_buf = st->reg_read_rx_buf,
},
};
unsigned int size;
int ret;
ret = ad4130_get_reg_size(st, reg, &size);
if (ret)
return ret;
st->reg_read_tx_buf[0] = AD4130_COMMS_READ_MASK | reg;
t[1].len = size;
ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t));
if (ret)
return ret;
switch (size) {
case 3:
*val = get_unaligned_be24(st->reg_read_rx_buf);
break;
case 2:
*val = get_unaligned_be16(st->reg_read_rx_buf);
break;
case 1:
*val = st->reg_read_rx_buf[0];
break;
default:
return -EINVAL;
}
return 0;
}
static const struct regmap_config ad4130_regmap_config = {
.reg_read = ad4130_reg_read,
.reg_write = ad4130_reg_write,
};
static int ad4130_gpio_init_valid_mask(struct gpio_chip *gc,
unsigned long *valid_mask,
unsigned int ngpios)
{
struct ad4130_state *st = gpiochip_get_data(gc);
unsigned int i;
/*
* Output-only GPIO functionality is available on pins AIN2 through
* AIN5. If these pins are used for anything else, do not expose them.
*/
for (i = 0; i < ngpios; i++) {
unsigned int pin = i + AD4130_AIN2_P1;
bool valid = st->pins_fn[pin] == AD4130_PIN_FN_NONE;
__assign_bit(i, valid_mask, valid);
}
return 0;
}
static int ad4130_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
{
return GPIO_LINE_DIRECTION_OUT;
}
static void ad4130_gpio_set(struct gpio_chip *gc, unsigned int offset,
int value)
{
struct ad4130_state *st = gpiochip_get_data(gc);
unsigned int mask = FIELD_PREP(AD4130_IO_CONTROL_GPIO_DATA_MASK,
BIT(offset));
regmap_update_bits(st->regmap, AD4130_IO_CONTROL_REG, mask,
value ? mask : 0);
}
static int ad4130_set_mode(struct ad4130_state *st, enum ad4130_mode mode)
{
return regmap_update_bits(st->regmap, AD4130_ADC_CONTROL_REG,
AD4130_ADC_CONTROL_MODE_MASK,
FIELD_PREP(AD4130_ADC_CONTROL_MODE_MASK, mode));
}
static int ad4130_set_watermark_interrupt_en(struct ad4130_state *st, bool en)
{
return regmap_update_bits(st->regmap, AD4130_FIFO_CONTROL_REG,
AD4130_FIFO_CONTROL_WM_INT_EN_MASK,
FIELD_PREP(AD4130_FIFO_CONTROL_WM_INT_EN_MASK, en));
}
static unsigned int ad4130_watermark_reg_val(unsigned int val)
{
if (val == AD4130_FIFO_SIZE)
val = AD4130_WATERMARK_256;
return val;
}
static int ad4130_set_fifo_mode(struct ad4130_state *st,
enum ad4130_fifo_mode mode)
{
return regmap_update_bits(st->regmap, AD4130_FIFO_CONTROL_REG,
AD4130_FIFO_CONTROL_MODE_MASK,
FIELD_PREP(AD4130_FIFO_CONTROL_MODE_MASK, mode));
}
static void ad4130_push_fifo_data(struct iio_dev *indio_dev)
{
struct ad4130_state *st = iio_priv(indio_dev);
unsigned int data_reg_size = ad4130_data_reg_size(st);
unsigned int transfer_len = st->effective_watermark * data_reg_size;
unsigned int set_size = st->num_enabled_channels * data_reg_size;
unsigned int i;
int ret;
st->fifo_tx_buf[1] = ad4130_watermark_reg_val(st->effective_watermark);
st->fifo_xfer[1].len = transfer_len;
ret = spi_sync(st->spi, &st->fifo_msg);
if (ret)
return;
for (i = 0; i < transfer_len; i += set_size)
iio_push_to_buffers(indio_dev, &st->fifo_rx_buf[i]);
}
static irqreturn_t ad4130_irq_handler(int irq, void *private)
{
struct iio_dev *indio_dev = private;
struct ad4130_state *st = iio_priv(indio_dev);
if (iio_buffer_enabled(indio_dev))
ad4130_push_fifo_data(indio_dev);
else
complete(&st->completion);
return IRQ_HANDLED;
}
static int ad4130_find_slot(struct ad4130_state *st,
struct ad4130_setup_info *target_setup_info,
unsigned int *slot, bool *overwrite)
{
unsigned int i;
*slot = AD4130_INVALID_SLOT;
*overwrite = false;
for (i = 0; i < AD4130_MAX_SETUPS; i++) {
struct ad4130_slot_info *slot_info = &st->slots_info[i];
/* Immediately accept a matching setup info. */
if (!memcmp(target_setup_info, &slot_info->setup,
sizeof(*target_setup_info))) {
*slot = i;
return 0;
}
/* Ignore all setups which are used by enabled channels. */
if (slot_info->enabled_channels)
continue;
/* Find the least used slot. */
if (*slot == AD4130_INVALID_SLOT ||
slot_info->channels < st->slots_info[*slot].channels)
*slot = i;
}
if (*slot == AD4130_INVALID_SLOT)
return -EINVAL;
*overwrite = true;
return 0;
}
static void ad4130_unlink_channel(struct ad4130_state *st, unsigned int channel)
{
struct ad4130_chan_info *chan_info = &st->chans_info[channel];
struct ad4130_slot_info *slot_info = &st->slots_info[chan_info->slot];
chan_info->slot = AD4130_INVALID_SLOT;
slot_info->channels--;
}
static int ad4130_unlink_slot(struct ad4130_state *st, unsigned int slot)
{
unsigned int i;
for (i = 0; i < AD4130_MAX_CHANNELS; i++) {
struct ad4130_chan_info *chan_info = &st->chans_info[i];
if (!chan_info->initialized || chan_info->slot != slot)
continue;
ad4130_unlink_channel(st, i);
}
return 0;
}
static int ad4130_link_channel_slot(struct ad4130_state *st,
unsigned int channel, unsigned int slot)
{
struct ad4130_slot_info *slot_info = &st->slots_info[slot];
struct ad4130_chan_info *chan_info = &st->chans_info[channel];
int ret;
ret = regmap_update_bits(st->regmap, AD4130_CHANNEL_X_REG(channel),
AD4130_CHANNEL_SETUP_MASK,
FIELD_PREP(AD4130_CHANNEL_SETUP_MASK, slot));
if (ret)
return ret;
chan_info->slot = slot;
slot_info->channels++;
return 0;
}
static int ad4130_write_slot_setup(struct ad4130_state *st,
unsigned int slot,
struct ad4130_setup_info *setup_info)
{
unsigned int val;
int ret;
val = FIELD_PREP(AD4130_CONFIG_IOUT1_VAL_MASK, setup_info->iout0_val) |
FIELD_PREP(AD4130_CONFIG_IOUT1_VAL_MASK, setup_info->iout1_val) |
FIELD_PREP(AD4130_CONFIG_BURNOUT_MASK, setup_info->burnout) |
FIELD_PREP(AD4130_CONFIG_REF_BUFP_MASK, setup_info->ref_bufp) |
FIELD_PREP(AD4130_CONFIG_REF_BUFM_MASK, setup_info->ref_bufm) |
FIELD_PREP(AD4130_CONFIG_REF_SEL_MASK, setup_info->ref_sel) |
FIELD_PREP(AD4130_CONFIG_PGA_MASK, setup_info->pga);
ret = regmap_write(st->regmap, AD4130_CONFIG_X_REG(slot), val);
if (ret)
return ret;
val = FIELD_PREP(AD4130_FILTER_MODE_MASK, setup_info->filter_mode) |
FIELD_PREP(AD4130_FILTER_SELECT_MASK, setup_info->fs);
ret = regmap_write(st->regmap, AD4130_FILTER_X_REG(slot), val);
if (ret)
return ret;
memcpy(&st->slots_info[slot].setup, setup_info, sizeof(*setup_info));
return 0;
}
static int ad4130_write_channel_setup(struct ad4130_state *st,
unsigned int channel, bool on_enable)
{
struct ad4130_chan_info *chan_info = &st->chans_info[channel];
struct ad4130_setup_info *setup_info = &chan_info->setup;
bool overwrite;
int slot;
int ret;
/*
* The following cases need to be handled.
*
* 1. Enabled and linked channel with setup changes:
* - Find a slot. If not possible, return error.
* - Unlink channel from current slot.
* - If the slot has channels linked to it, unlink all channels, and
* write the new setup to it.
* - Link channel to new slot.
*
* 2. Soon to be enabled and unlinked channel:
* - Find a slot. If not possible, return error.
* - If the slot has channels linked to it, unlink all channels, and
* write the new setup to it.
* - Link channel to the slot.
*
* 3. Disabled and linked channel with setup changes:
* - Unlink channel from current slot.
*
* 4. Soon to be enabled and linked channel:
* 5. Disabled and unlinked channel with setup changes:
* - Do nothing.
*/
/* Case 4 */
if (on_enable && chan_info->slot != AD4130_INVALID_SLOT)
return 0;
if (!on_enable && !chan_info->enabled) {
if (chan_info->slot != AD4130_INVALID_SLOT)
/* Case 3 */
ad4130_unlink_channel(st, channel);
/* Cases 3 & 5 */
return 0;
}
/* Cases 1 & 2 */
ret = ad4130_find_slot(st, setup_info, &slot, &overwrite);
if (ret)
return ret;
if (chan_info->slot != AD4130_INVALID_SLOT)
/* Case 1 */
ad4130_unlink_channel(st, channel);
if (overwrite) {
ret = ad4130_unlink_slot(st, slot);
if (ret)
return ret;
ret = ad4130_write_slot_setup(st, slot, setup_info);
if (ret)
return ret;
}
return ad4130_link_channel_slot(st, channel, slot);
}
static int ad4130_set_channel_enable(struct ad4130_state *st,
unsigned int channel, bool status)
{
struct ad4130_chan_info *chan_info = &st->chans_info[channel];
struct ad4130_slot_info *slot_info;
int ret;
if (chan_info->enabled == status)
return 0;
if (status) {
ret = ad4130_write_channel_setup(st, channel, true);
if (ret)
return ret;
}
slot_info = &st->slots_info[chan_info->slot];
ret = regmap_update_bits(st->regmap, AD4130_CHANNEL_X_REG(channel),
AD4130_CHANNEL_EN_MASK,
FIELD_PREP(AD4130_CHANNEL_EN_MASK, status));
if (ret)
return ret;
slot_info->enabled_channels += status ? 1 : -1;
chan_info->enabled = status;
return 0;
}
/*
* Table 58. FILTER_MODE_n bits and Filter Types of the datasheet describes
* the relation between filter mode, ODR and FS.
*
* Notice that the max ODR of each filter mode is not necessarily the
* absolute max ODR supported by the chip.
*
* The ODR divider is not explicitly specified, but it can be deduced based
* on the ODR range of each filter mode.
*
* For example, for Sinc4+Sinc1, max ODR is 218.18. That means that the
* absolute max ODR is divided by 11 to achieve the max ODR of this filter
* mode.
*
* The formulas for converting between ODR and FS for a specific filter
* mode can be deduced from the same table.
*
* Notice that FS = 1 actually means max ODR, and that ODR decreases by
* (maximum ODR / maximum FS) for each increment of FS.
*
* odr = MAX_ODR / odr_div * (1 - (fs - 1) / fs_max) <=>
* odr = MAX_ODR * (1 - (fs - 1) / fs_max) / odr_div <=>
* odr = MAX_ODR * (1 - (fs - 1) / fs_max) / odr_div <=>
* odr = MAX_ODR * (fs_max - fs + 1) / (fs_max * odr_div)
* (used in ad4130_fs_to_freq)
*
* For the opposite formula, FS can be extracted from the last one.
*
* MAX_ODR * (fs_max - fs + 1) = fs_max * odr_div * odr <=>
* fs_max - fs + 1 = fs_max * odr_div * odr / MAX_ODR <=>
* fs = 1 + fs_max - fs_max * odr_div * odr / MAX_ODR
* (used in ad4130_fs_to_freq)
*/
static void ad4130_freq_to_fs(enum ad4130_filter_mode filter_mode,
int val, int val2, unsigned int *fs)
{
const struct ad4130_filter_config *filter_config =
&ad4130_filter_configs[filter_mode];
u64 dividend, divisor;
int temp;
dividend = filter_config->fs_max * filter_config->odr_div *
((u64)val * NANO + val2);
divisor = (u64)AD4130_MAX_ODR * NANO;
temp = AD4130_FILTER_SELECT_MIN + filter_config->fs_max -
DIV64_U64_ROUND_CLOSEST(dividend, divisor);
if (temp < AD4130_FILTER_SELECT_MIN)
temp = AD4130_FILTER_SELECT_MIN;
else if (temp > filter_config->fs_max)
temp = filter_config->fs_max;
*fs = temp;
}
static void ad4130_fs_to_freq(enum ad4130_filter_mode filter_mode,
unsigned int fs, int *val, int *val2)
{
const struct ad4130_filter_config *filter_config =
&ad4130_filter_configs[filter_mode];
unsigned int dividend, divisor;
u64 temp;
dividend = (filter_config->fs_max - fs + AD4130_FILTER_SELECT_MIN) *
AD4130_MAX_ODR;
divisor = filter_config->fs_max * filter_config->odr_div;
temp = div_u64((u64)dividend * NANO, divisor);
*val = div_u64_rem(temp, NANO, val2);
}
static int ad4130_set_filter_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
unsigned int val)
{
struct ad4130_state *st = iio_priv(indio_dev);
unsigned int channel = chan->scan_index;
struct ad4130_chan_info *chan_info = &st->chans_info[channel];
struct ad4130_setup_info *setup_info = &chan_info->setup;
enum ad4130_filter_mode old_filter_mode;
int freq_val, freq_val2;
unsigned int old_fs;
int ret = 0;
mutex_lock(&st->lock);
if (setup_info->filter_mode == val)
goto out;
old_fs = setup_info->fs;
old_filter_mode = setup_info->filter_mode;
/*
* When switching between filter modes, try to match the ODR as
* close as possible. To do this, convert the current FS into ODR
* using the old filter mode, then convert it back into FS using
* the new filter mode.
*/
ad4130_fs_to_freq(setup_info->filter_mode, setup_info->fs,
&freq_val, &freq_val2);
ad4130_freq_to_fs(val, freq_val, freq_val2, &setup_info->fs);
setup_info->filter_mode = val;
ret = ad4130_write_channel_setup(st, channel, false);
if (ret) {
setup_info->fs = old_fs;
setup_info->filter_mode = old_filter_mode;
}
out:
mutex_unlock(&st->lock);
return ret;
}
static int ad4130_get_filter_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
{
struct ad4130_state *st = iio_priv(indio_dev);
unsigned int channel = chan->scan_index;
struct ad4130_setup_info *setup_info = &st->chans_info[channel].setup;
enum ad4130_filter_mode filter_mode;
mutex_lock(&st->lock);
filter_mode = setup_info->filter_mode;
mutex_unlock(&st->lock);
return filter_mode;
}
static const struct iio_enum ad4130_filter_mode_enum = {
.items = ad4130_filter_modes_str,
.num_items = ARRAY_SIZE(ad4130_filter_modes_str),
.set = ad4130_set_filter_mode,
.get = ad4130_get_filter_mode,
};
static const struct iio_chan_spec_ext_info ad4130_filter_mode_ext_info[] = {
IIO_ENUM("filter_mode", IIO_SEPARATE, &ad4130_filter_mode_enum),
IIO_ENUM_AVAILABLE("filter_mode", IIO_SHARED_BY_TYPE,
&ad4130_filter_mode_enum),
{ }
};
static const struct iio_chan_spec ad4130_channel_template = {
.type = IIO_VOLTAGE,
.indexed = 1,
.differential = 1,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SAMP_FREQ),
.info_mask_separate_available = BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ),
.ext_info = ad4130_filter_mode_ext_info,
.scan_type = {
.sign = 'u',
.endianness = IIO_BE,
},
};
static int ad4130_set_channel_pga(struct ad4130_state *st, unsigned int channel,
int val, int val2)
{
struct ad4130_chan_info *chan_info = &st->chans_info[channel];
struct ad4130_setup_info *setup_info = &chan_info->setup;
unsigned int pga, old_pga;
int ret = 0;
for (pga = 0; pga < AD4130_MAX_PGA; pga++)
if (val == st->scale_tbls[setup_info->ref_sel][pga][0] &&
val2 == st->scale_tbls[setup_info->ref_sel][pga][1])
break;
if (pga == AD4130_MAX_PGA)
return -EINVAL;
mutex_lock(&st->lock);
if (pga == setup_info->pga)
goto out;
old_pga = setup_info->pga;
setup_info->pga = pga;
ret = ad4130_write_channel_setup(st, channel, false);
if (ret)
setup_info->pga = old_pga;
out:
mutex_unlock(&st->lock);
return ret;
}
static int ad4130_set_channel_freq(struct ad4130_state *st,
unsigned int channel, int val, int val2)
{
struct ad4130_chan_info *chan_info = &st->chans_info[channel];
struct ad4130_setup_info *setup_info = &chan_info->setup;
unsigned int fs, old_fs;
int ret = 0;
mutex_lock(&st->lock);
old_fs = setup_info->fs;
ad4130_freq_to_fs(setup_info->filter_mode, val, val2, &fs);
if (fs == setup_info->fs)
goto out;
setup_info->fs = fs;
ret = ad4130_write_channel_setup(st, channel, false);
if (ret)
setup_info->fs = old_fs;
out:
mutex_unlock(&st->lock);
return ret;
}
static int _ad4130_read_sample(struct iio_dev *indio_dev, unsigned int channel,
int *val)
{
struct ad4130_state *st = iio_priv(indio_dev);
int ret;
ret = ad4130_set_channel_enable(st, channel, true);
if (ret)
return ret;
reinit_completion(&st->completion);
ret = ad4130_set_mode(st, AD4130_MODE_CONTINUOUS);
if (ret)
return ret;
ret = wait_for_completion_timeout(&st->completion,
msecs_to_jiffies(1000));
if (!ret)
return -ETIMEDOUT;
ret = ad4130_set_mode(st, AD4130_MODE_IDLE);
if (ret)
return ret;
ret = regmap_read(st->regmap, AD4130_DATA_REG, val);
if (ret)
return ret;
ret = ad4130_set_channel_enable(st, channel, false);
if (ret)
return ret;
return IIO_VAL_INT;
}
static int ad4130_read_sample(struct iio_dev *indio_dev, unsigned int channel,
int *val)
{
struct ad4130_state *st = iio_priv(indio_dev);
int ret;
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
return ret;
mutex_lock(&st->lock);
ret = _ad4130_read_sample(indio_dev, channel, val);
mutex_unlock(&st->lock);
iio_device_release_direct_mode(indio_dev);
return ret;
}
static int ad4130_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long info)
{
struct ad4130_state *st = iio_priv(indio_dev);
unsigned int channel = chan->scan_index;
struct ad4130_setup_info *setup_info = &st->chans_info[channel].setup;
switch (info) {
case IIO_CHAN_INFO_RAW:
return ad4130_read_sample(indio_dev, channel, val);
case IIO_CHAN_INFO_SCALE:
mutex_lock(&st->lock);
*val = st->scale_tbls[setup_info->ref_sel][setup_info->pga][0];
*val2 = st->scale_tbls[setup_info->ref_sel][setup_info->pga][1];
mutex_unlock(&st->lock);
return IIO_VAL_INT_PLUS_NANO;
case IIO_CHAN_INFO_OFFSET:
*val = st->bipolar ? -BIT(chan->scan_type.realbits - 1) : 0;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
mutex_lock(&st->lock);
ad4130_fs_to_freq(setup_info->filter_mode, setup_info->fs,
val, val2);
mutex_unlock(&st->lock);
return IIO_VAL_INT_PLUS_NANO;
default:
return -EINVAL;
}
}
static int ad4130_read_avail(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
const int **vals, int *type, int *length,
long info)
{
struct ad4130_state *st = iio_priv(indio_dev);
unsigned int channel = chan->scan_index;
struct ad4130_setup_info *setup_info = &st->chans_info[channel].setup;
const struct ad4130_filter_config *filter_config;
switch (info) {
case IIO_CHAN_INFO_SCALE:
*vals = (int *)st->scale_tbls[setup_info->ref_sel];
*length = ARRAY_SIZE(st->scale_tbls[setup_info->ref_sel]) * 2;
*type = IIO_VAL_INT_PLUS_NANO;
return IIO_AVAIL_LIST;
case IIO_CHAN_INFO_SAMP_FREQ:
mutex_lock(&st->lock);
filter_config = &ad4130_filter_configs[setup_info->filter_mode];
mutex_unlock(&st->lock);
*vals = (int *)filter_config->samp_freq_avail;
*length = filter_config->samp_freq_avail_len * 2;
*type = IIO_VAL_FRACTIONAL;
return filter_config->samp_freq_avail_type;
default:
return -EINVAL;
}
}
static int ad4130_write_raw_get_fmt(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
long info)
{
switch (info) {
case IIO_CHAN_INFO_SCALE:
case IIO_CHAN_INFO_SAMP_FREQ:
return IIO_VAL_INT_PLUS_NANO;
default:
return -EINVAL;
}
}
static int ad4130_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long info)
{
struct ad4130_state *st = iio_priv(indio_dev);
unsigned int channel = chan->scan_index;
switch (info) {
case IIO_CHAN_INFO_SCALE:
return ad4130_set_channel_pga(st, channel, val, val2);
case IIO_CHAN_INFO_SAMP_FREQ:
return ad4130_set_channel_freq(st, channel, val, val2);
default:
return -EINVAL;
}
}
static int ad4130_reg_access(struct iio_dev *indio_dev, unsigned int reg,
unsigned int writeval, unsigned int *readval)
{
struct ad4130_state *st = iio_priv(indio_dev);
if (readval)
return regmap_read(st->regmap, reg, readval);
return regmap_write(st->regmap, reg, writeval);
}
static int ad4130_update_scan_mode(struct iio_dev *indio_dev,
const unsigned long *scan_mask)
{
struct ad4130_state *st = iio_priv(indio_dev);
unsigned int channel;
unsigned int val = 0;
int ret;
mutex_lock(&st->lock);
for_each_set_bit(channel, scan_mask, indio_dev->num_channels) {
ret = ad4130_set_channel_enable(st, channel, true);
if (ret)
goto out;
val++;
}
st->num_enabled_channels = val;
out:
mutex_unlock(&st->lock);
return 0;
}
static int ad4130_set_fifo_watermark(struct iio_dev *indio_dev, unsigned int val)
{
struct ad4130_state *st = iio_priv(indio_dev);
unsigned int eff;
int ret;
if (val > AD4130_FIFO_SIZE)
return -EINVAL;
eff = val * st->num_enabled_channels;
if (eff > AD4130_FIFO_SIZE)
/*
* Always set watermark to a multiple of the number of
* enabled channels to avoid making the FIFO unaligned.
*/
eff = rounddown(AD4130_FIFO_SIZE, st->num_enabled_channels);
mutex_lock(&st->lock);
ret = regmap_update_bits(st->regmap, AD4130_FIFO_CONTROL_REG,
AD4130_FIFO_CONTROL_WM_MASK,
FIELD_PREP(AD4130_FIFO_CONTROL_WM_MASK,
ad4130_watermark_reg_val(eff)));
if (ret)
goto out;
st->effective_watermark = eff;
st->watermark = val;
out:
mutex_unlock(&st->lock);
return ret;
}
static const struct iio_info ad4130_info = {
.read_raw = ad4130_read_raw,
.read_avail = ad4130_read_avail,
.write_raw_get_fmt = ad4130_write_raw_get_fmt,
.write_raw = ad4130_write_raw,
.update_scan_mode = ad4130_update_scan_mode,
.hwfifo_set_watermark = ad4130_set_fifo_watermark,
.debugfs_reg_access = ad4130_reg_access,
};
static int ad4130_buffer_postenable(struct iio_dev *indio_dev)
{
struct ad4130_state *st = iio_priv(indio_dev);
int ret;
mutex_lock(&st->lock);
ret = ad4130_set_watermark_interrupt_en(st, true);
if (ret)
goto out;
ret = irq_set_irq_type(st->spi->irq, st->inv_irq_trigger);
if (ret)
goto out;
ret = ad4130_set_fifo_mode(st, AD4130_FIFO_MODE_WM);
if (ret)
goto out;
ret = ad4130_set_mode(st, AD4130_MODE_CONTINUOUS);
out:
mutex_unlock(&st->lock);
return ret;
}
static int ad4130_buffer_predisable(struct iio_dev *indio_dev)
{
struct ad4130_state *st = iio_priv(indio_dev);
unsigned int i;
int ret;
mutex_lock(&st->lock);
ret = ad4130_set_mode(st, AD4130_MODE_IDLE);
if (ret)
goto out;
ret = irq_set_irq_type(st->spi->irq, st->irq_trigger);
if (ret)
goto out;
ret = ad4130_set_fifo_mode(st, AD4130_FIFO_MODE_DISABLED);
if (ret)
goto out;
ret = ad4130_set_watermark_interrupt_en(st, false);
if (ret)
goto out;
/*
* update_scan_mode() is not called in the disable path, disable all
* channels here.
*/
for (i = 0; i < indio_dev->num_channels; i++) {
ret = ad4130_set_channel_enable(st, i, false);
if (ret)
goto out;
}
out:
mutex_unlock(&st->lock);
return ret;
}
static const struct iio_buffer_setup_ops ad4130_buffer_ops = {
.postenable = ad4130_buffer_postenable,
.predisable = ad4130_buffer_predisable,
};
static ssize_t hwfifo_watermark_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ad4130_state *st = iio_priv(dev_to_iio_dev(dev));
unsigned int val;
mutex_lock(&st->lock);
val = st->watermark;
mutex_unlock(&st->lock);
return sysfs_emit(buf, "%d\n", val);
}
static ssize_t hwfifo_enabled_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ad4130_state *st = iio_priv(dev_to_iio_dev(dev));
unsigned int val;
int ret;
ret = regmap_read(st->regmap, AD4130_FIFO_CONTROL_REG, &val);
if (ret)
return ret;
val = FIELD_GET(AD4130_FIFO_CONTROL_MODE_MASK, val);
return sysfs_emit(buf, "%d\n", val != AD4130_FIFO_MODE_DISABLED);
}
static ssize_t hwfifo_watermark_min_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return sysfs_emit(buf, "%s\n", "1");
}
static ssize_t hwfifo_watermark_max_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return sysfs_emit(buf, "%s\n", __stringify(AD4130_FIFO_SIZE));
}
static IIO_DEVICE_ATTR_RO(hwfifo_watermark_min, 0);
static IIO_DEVICE_ATTR_RO(hwfifo_watermark_max, 0);
static IIO_DEVICE_ATTR_RO(hwfifo_watermark, 0);
static IIO_DEVICE_ATTR_RO(hwfifo_enabled, 0);
static const struct attribute *ad4130_fifo_attributes[] = {
&iio_dev_attr_hwfifo_watermark_min.dev_attr.attr,
&iio_dev_attr_hwfifo_watermark_max.dev_attr.attr,
&iio_dev_attr_hwfifo_watermark.dev_attr.attr,
&iio_dev_attr_hwfifo_enabled.dev_attr.attr,
NULL
};
static int _ad4130_find_table_index(const unsigned int *tbl, size_t len,
unsigned int val)
{
unsigned int i;
for (i = 0; i < len; i++)
if (tbl[i] == val)
return i;
return -EINVAL;
}
#define ad4130_find_table_index(table, val) \
_ad4130_find_table_index(table, ARRAY_SIZE(table), val)
static int ad4130_get_ref_voltage(struct ad4130_state *st,
enum ad4130_ref_sel ref_sel)
{
switch (ref_sel) {
case AD4130_REF_REFIN1:
return regulator_get_voltage(st->regulators[2].consumer);
case AD4130_REF_REFIN2:
return regulator_get_voltage(st->regulators[3].consumer);
case AD4130_REF_AVDD_AVSS:
return regulator_get_voltage(st->regulators[0].consumer);
case AD4130_REF_REFOUT_AVSS:
return st->int_ref_uv;
default:
return -EINVAL;
}
}
static int ad4130_parse_fw_setup(struct ad4130_state *st,
struct fwnode_handle *child,
struct ad4130_setup_info *setup_info)
{
struct device *dev = &st->spi->dev;
u32 tmp;
int ret;
tmp = 0;
fwnode_property_read_u32(child, "adi,excitation-current-0-nanoamp", &tmp);
ret = ad4130_find_table_index(ad4130_iout_current_na_tbl, tmp);
if (ret < 0)
return dev_err_probe(dev, ret,
"Invalid excitation current %unA\n", tmp);
setup_info->iout0_val = ret;
tmp = 0;
fwnode_property_read_u32(child, "adi,excitation-current-1-nanoamp", &tmp);
ret = ad4130_find_table_index(ad4130_iout_current_na_tbl, tmp);
if (ret < 0)
return dev_err_probe(dev, ret,
"Invalid excitation current %unA\n", tmp);
setup_info->iout1_val = ret;
tmp = 0;
fwnode_property_read_u32(child, "adi,burnout-current-nanoamp", &tmp);
ret = ad4130_find_table_index(ad4130_burnout_current_na_tbl, tmp);
if (ret < 0)
return dev_err_probe(dev, ret,
"Invalid burnout current %unA\n", tmp);
setup_info->burnout = ret;
setup_info->ref_bufp = fwnode_property_read_bool(child, "adi,buffered-positive");
setup_info->ref_bufm = fwnode_property_read_bool(child, "adi,buffered-negative");
setup_info->ref_sel = AD4130_REF_REFIN1;
fwnode_property_read_u32(child, "adi,reference-select",
&setup_info->ref_sel);
if (setup_info->ref_sel >= AD4130_REF_SEL_MAX)
return dev_err_probe(dev, -EINVAL,
"Invalid reference selected %u\n",
setup_info->ref_sel);
if (setup_info->ref_sel == AD4130_REF_REFOUT_AVSS)
st->int_ref_en = true;
ret = ad4130_get_ref_voltage(st, setup_info->ref_sel);
if (ret < 0)
return dev_err_probe(dev, ret, "Cannot use reference %u\n",
setup_info->ref_sel);
return 0;
}
static int ad4130_validate_diff_channel(struct ad4130_state *st, u32 pin)
{
struct device *dev = &st->spi->dev;
if (pin >= AD4130_MAX_DIFF_INPUTS)
return dev_err_probe(dev, -EINVAL,
"Invalid diffreential channel %u\n", pin);
if (pin >= AD4130_MAX_ANALOG_PINS)
return 0;
if (st->pins_fn[pin] == AD4130_PIN_FN_SPECIAL)
return dev_err_probe(dev, -EINVAL,
"Pin %u already used with fn %u\n", pin,
st->pins_fn[pin]);
st->pins_fn[pin] |= AD4130_PIN_FN_DIFF;
return 0;
}
static int ad4130_validate_diff_channels(struct ad4130_state *st,
u32 *pins, unsigned int len)
{
unsigned int i;
int ret;
for (i = 0; i < len; i++) {
ret = ad4130_validate_diff_channel(st, pins[i]);
if (ret)
return ret;
}
return 0;
}
static int ad4130_validate_excitation_pin(struct ad4130_state *st, u32 pin)
{
struct device *dev = &st->spi->dev;
if (pin >= AD4130_MAX_ANALOG_PINS)
return dev_err_probe(dev, -EINVAL,
"Invalid excitation pin %u\n", pin);
if (st->pins_fn[pin] == AD4130_PIN_FN_SPECIAL)
return dev_err_probe(dev, -EINVAL,
"Pin %u already used with fn %u\n", pin,
st->pins_fn[pin]);
st->pins_fn[pin] |= AD4130_PIN_FN_EXCITATION;
return 0;
}
static int ad4130_validate_vbias_pin(struct ad4130_state *st, u32 pin)
{
struct device *dev = &st->spi->dev;
if (pin >= AD4130_MAX_ANALOG_PINS)
return dev_err_probe(dev, -EINVAL, "Invalid vbias pin %u\n",
pin);
if (st->pins_fn[pin] == AD4130_PIN_FN_SPECIAL)
return dev_err_probe(dev, -EINVAL,
"Pin %u already used with fn %u\n", pin,
st->pins_fn[pin]);
st->pins_fn[pin] |= AD4130_PIN_FN_VBIAS;
return 0;
}
static int ad4130_validate_vbias_pins(struct ad4130_state *st,
u32 *pins, unsigned int len)
{
unsigned int i;
int ret;
for (i = 0; i < st->num_vbias_pins; i++) {
ret = ad4130_validate_vbias_pin(st, pins[i]);
if (ret)
return ret;
}
return 0;
}
static int ad4130_parse_fw_channel(struct iio_dev *indio_dev,
struct fwnode_handle *child)
{
struct ad4130_state *st = iio_priv(indio_dev);
unsigned int resolution = ad4130_resolution(st);
unsigned int index = indio_dev->num_channels++;
struct device *dev = &st->spi->dev;
struct ad4130_chan_info *chan_info;
struct iio_chan_spec *chan;
u32 pins[2];
int ret;
if (index >= AD4130_MAX_CHANNELS)
return dev_err_probe(dev, -EINVAL, "Too many channels\n");
chan = &st->chans[index];
chan_info = &st->chans_info[index];
*chan = ad4130_channel_template;
chan->scan_type.realbits = resolution;
chan->scan_type.storagebits = resolution;
chan->scan_index = index;
chan_info->slot = AD4130_INVALID_SLOT;
chan_info->setup.fs = AD4130_FILTER_SELECT_MIN;
chan_info->initialized = true;
ret = fwnode_property_read_u32_array(child, "diff-channels", pins,
ARRAY_SIZE(pins));
if (ret)
return ret;
ret = ad4130_validate_diff_channels(st, pins, ARRAY_SIZE(pins));
if (ret)
return ret;
chan->channel = pins[0];
chan->channel2 = pins[1];
ret = ad4130_parse_fw_setup(st, child, &chan_info->setup);
if (ret)
return ret;
fwnode_property_read_u32(child, "adi,excitation-pin-0",
&chan_info->iout0);
if (chan_info->setup.iout0_val != AD4130_IOUT_OFF) {
ret = ad4130_validate_excitation_pin(st, chan_info->iout0);
if (ret)
return ret;
}
fwnode_property_read_u32(child, "adi,excitation-pin-1",
&chan_info->iout1);
if (chan_info->setup.iout1_val != AD4130_IOUT_OFF) {
ret = ad4130_validate_excitation_pin(st, chan_info->iout1);
if (ret)
return ret;
}
return 0;
}
static int ad4130_parse_fw_children(struct iio_dev *indio_dev)
{
struct ad4130_state *st = iio_priv(indio_dev);
struct device *dev = &st->spi->dev;
struct fwnode_handle *child;
int ret;
indio_dev->channels = st->chans;
device_for_each_child_node(dev, child) {
ret = ad4130_parse_fw_channel(indio_dev, child);
if (ret) {
fwnode_handle_put(child);
return ret;
}
}
return 0;
}
static int ad4310_parse_fw(struct iio_dev *indio_dev)
{
struct ad4130_state *st = iio_priv(indio_dev);
struct device *dev = &st->spi->dev;
u32 ext_clk_freq = AD4130_MCLK_FREQ_76_8KHZ;
unsigned int i;
int avdd_uv;
int irq;
int ret;
st->mclk = devm_clk_get_optional(dev, "mclk");
if (IS_ERR(st->mclk))
return dev_err_probe(dev, PTR_ERR(st->mclk),
"Failed to get mclk\n");
st->int_pin_sel = AD4130_INT_PIN_INT;
for (i = 0; i < ARRAY_SIZE(ad4130_int_pin_names); i++) {
irq = fwnode_irq_get_byname(dev_fwnode(dev),
ad4130_int_pin_names[i]);
if (irq > 0) {
st->int_pin_sel = i;
break;
}
}
if (st->int_pin_sel == AD4130_INT_PIN_DOUT)
return dev_err_probe(dev, -EINVAL,
"Cannot use DOUT as interrupt pin\n");
if (st->int_pin_sel == AD4130_INT_PIN_P2)
st->pins_fn[AD4130_AIN3_P2] = AD4130_PIN_FN_SPECIAL;
device_property_read_u32(dev, "adi,ext-clk-freq-hz", &ext_clk_freq);
if (ext_clk_freq != AD4130_MCLK_FREQ_153_6KHZ &&
ext_clk_freq != AD4130_MCLK_FREQ_76_8KHZ)
return dev_err_probe(dev, -EINVAL,
"Invalid external clock frequency %u\n",
ext_clk_freq);
if (st->mclk && ext_clk_freq == AD4130_MCLK_FREQ_153_6KHZ)
st->mclk_sel = AD4130_MCLK_153_6KHZ_EXT;
else if (st->mclk)
st->mclk_sel = AD4130_MCLK_76_8KHZ_EXT;
else
st->mclk_sel = AD4130_MCLK_76_8KHZ;
if (st->int_pin_sel == AD4130_INT_PIN_CLK &&
st->mclk_sel != AD4130_MCLK_76_8KHZ)
return dev_err_probe(dev, -EINVAL,
"Invalid clock %u for interrupt pin %u\n",
st->mclk_sel, st->int_pin_sel);
st->int_ref_uv = AD4130_INT_REF_2_5V;
/*
* When the AVDD supply is set to below 2.5V the internal reference of
* 1.25V should be selected.
* See datasheet page 37, section ADC REFERENCE.
*/
avdd_uv = regulator_get_voltage(st->regulators[0].consumer);
if (avdd_uv > 0 && avdd_uv < AD4130_INT_REF_2_5V)
st->int_ref_uv = AD4130_INT_REF_1_25V;
st->bipolar = device_property_read_bool(dev, "adi,bipolar");
ret = device_property_count_u32(dev, "adi,vbias-pins");
if (ret > 0) {
if (ret > AD4130_MAX_ANALOG_PINS)
return dev_err_probe(dev, -EINVAL,
"Too many vbias pins %u\n", ret);
st->num_vbias_pins = ret;
ret = device_property_read_u32_array(dev, "adi,vbias-pins",
st->vbias_pins,
st->num_vbias_pins);
if (ret)
return dev_err_probe(dev, ret,
"Failed to read vbias pins\n");
ret = ad4130_validate_vbias_pins(st, st->vbias_pins,
st->num_vbias_pins);
if (ret)
return ret;
}
ret = ad4130_parse_fw_children(indio_dev);
if (ret)
return ret;
return 0;
}
static void ad4130_fill_scale_tbls(struct ad4130_state *st)
{
unsigned int pow = ad4130_resolution(st) - st->bipolar;
unsigned int i, j;
for (i = 0; i < AD4130_REF_SEL_MAX; i++) {
int ret;
u64 nv;
ret = ad4130_get_ref_voltage(st, i);
if (ret < 0)
continue;
nv = (u64)ret * NANO;
for (j = 0; j < AD4130_MAX_PGA; j++)
st->scale_tbls[i][j][1] = div_u64(nv >> (pow + j), MILLI);
}
}
static void ad4130_clk_disable_unprepare(void *clk)
{
clk_disable_unprepare(clk);
}
static int ad4130_set_mclk_sel(struct ad4130_state *st,
enum ad4130_mclk_sel mclk_sel)
{
return regmap_update_bits(st->regmap, AD4130_ADC_CONTROL_REG,
AD4130_ADC_CONTROL_MCLK_SEL_MASK,
FIELD_PREP(AD4130_ADC_CONTROL_MCLK_SEL_MASK,
mclk_sel));
}
static unsigned long ad4130_int_clk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
return AD4130_MCLK_FREQ_76_8KHZ;
}
static int ad4130_int_clk_is_enabled(struct clk_hw *hw)
{
struct ad4130_state *st = container_of(hw, struct ad4130_state, int_clk_hw);
return st->mclk_sel == AD4130_MCLK_76_8KHZ_OUT;
}
static int ad4130_int_clk_prepare(struct clk_hw *hw)
{
struct ad4130_state *st = container_of(hw, struct ad4130_state, int_clk_hw);
int ret;
ret = ad4130_set_mclk_sel(st, AD4130_MCLK_76_8KHZ_OUT);
if (ret)
return ret;
st->mclk_sel = AD4130_MCLK_76_8KHZ_OUT;
return 0;
}
static void ad4130_int_clk_unprepare(struct clk_hw *hw)
{
struct ad4130_state *st = container_of(hw, struct ad4130_state, int_clk_hw);
int ret;
ret = ad4130_set_mclk_sel(st, AD4130_MCLK_76_8KHZ);
if (ret)
return;
st->mclk_sel = AD4130_MCLK_76_8KHZ;
}
static const struct clk_ops ad4130_int_clk_ops = {
.recalc_rate = ad4130_int_clk_recalc_rate,
.is_enabled = ad4130_int_clk_is_enabled,
.prepare = ad4130_int_clk_prepare,
.unprepare = ad4130_int_clk_unprepare,
};
static int ad4130_setup_int_clk(struct ad4130_state *st)
{
struct device *dev = &st->spi->dev;
struct device_node *of_node = dev_of_node(dev);
struct clk_init_data init;
const char *clk_name;
struct clk *clk;
if (st->int_pin_sel == AD4130_INT_PIN_CLK ||
st->mclk_sel != AD4130_MCLK_76_8KHZ)
return 0;
if (!of_node)
return 0;
clk_name = of_node->name;
of_property_read_string(of_node, "clock-output-names", &clk_name);
init.name = clk_name;
init.ops = &ad4130_int_clk_ops;
st->int_clk_hw.init = &init;
clk = devm_clk_register(dev, &st->int_clk_hw);
if (IS_ERR(clk))
return PTR_ERR(clk);
return of_clk_add_provider(of_node, of_clk_src_simple_get, clk);
}
static int ad4130_setup(struct iio_dev *indio_dev)
{
struct ad4130_state *st = iio_priv(indio_dev);
struct device *dev = &st->spi->dev;
unsigned int int_ref_val;
unsigned long rate = AD4130_MCLK_FREQ_76_8KHZ;
unsigned int val;
unsigned int i;
int ret;
if (st->mclk_sel == AD4130_MCLK_153_6KHZ_EXT)
rate = AD4130_MCLK_FREQ_153_6KHZ;
ret = clk_set_rate(st->mclk, rate);
if (ret)
return ret;
ret = clk_prepare_enable(st->mclk);
if (ret)
return ret;
ret = devm_add_action_or_reset(dev, ad4130_clk_disable_unprepare,
st->mclk);
if (ret)
return ret;
if (st->int_ref_uv == AD4130_INT_REF_2_5V)
int_ref_val = AD4130_INT_REF_VAL_2_5V;
else
int_ref_val = AD4130_INT_REF_VAL_1_25V;
/* Switch to SPI 4-wire mode. */
val = FIELD_PREP(AD4130_ADC_CONTROL_CSB_EN_MASK, 1);
val |= FIELD_PREP(AD4130_ADC_CONTROL_BIPOLAR_MASK, st->bipolar);
val |= FIELD_PREP(AD4130_ADC_CONTROL_INT_REF_EN_MASK, st->int_ref_en);
val |= FIELD_PREP(AD4130_ADC_CONTROL_MODE_MASK, AD4130_MODE_IDLE);
val |= FIELD_PREP(AD4130_ADC_CONTROL_MCLK_SEL_MASK, st->mclk_sel);
val |= FIELD_PREP(AD4130_ADC_CONTROL_INT_REF_VAL_MASK, int_ref_val);
ret = regmap_write(st->regmap, AD4130_ADC_CONTROL_REG, val);
if (ret)
return ret;
/*
* Configure all GPIOs for output. If configured, the interrupt function
* of P2 takes priority over the GPIO out function.
*/
val = AD4130_IO_CONTROL_GPIO_CTRL_MASK;
val |= FIELD_PREP(AD4130_IO_CONTROL_INT_PIN_SEL_MASK, st->int_pin_sel);
ret = regmap_write(st->regmap, AD4130_IO_CONTROL_REG, val);
if (ret)
return ret;
val = 0;
for (i = 0; i < st->num_vbias_pins; i++)
val |= BIT(st->vbias_pins[i]);
ret = regmap_write(st->regmap, AD4130_VBIAS_REG, val);
if (ret)
return ret;
ret = regmap_update_bits(st->regmap, AD4130_FIFO_CONTROL_REG,
AD4130_FIFO_CONTROL_HEADER_MASK, 0);
if (ret)
return ret;
/* FIFO watermark interrupt starts out as enabled, disable it. */
ret = ad4130_set_watermark_interrupt_en(st, false);
if (ret)
return ret;
/* Setup channels. */
for (i = 0; i < indio_dev->num_channels; i++) {
struct ad4130_chan_info *chan_info = &st->chans_info[i];
struct iio_chan_spec *chan = &st->chans[i];
unsigned int val;
val = FIELD_PREP(AD4130_CHANNEL_AINP_MASK, chan->channel) |
FIELD_PREP(AD4130_CHANNEL_AINM_MASK, chan->channel2) |
FIELD_PREP(AD4130_CHANNEL_IOUT1_MASK, chan_info->iout0) |
FIELD_PREP(AD4130_CHANNEL_IOUT2_MASK, chan_info->iout1);
ret = regmap_write(st->regmap, AD4130_CHANNEL_X_REG(i), val);
if (ret)
return ret;
}
return 0;
}
static int ad4130_soft_reset(struct ad4130_state *st)
{
int ret;
ret = spi_write(st->spi, st->reset_buf, sizeof(st->reset_buf));
if (ret)
return ret;
fsleep(AD4130_RESET_SLEEP_US);
return 0;
}
static void ad4130_disable_regulators(void *data)
{
struct ad4130_state *st = data;
regulator_bulk_disable(ARRAY_SIZE(st->regulators), st->regulators);
}
static int ad4130_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
struct iio_dev *indio_dev;
struct ad4130_state *st;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
memset(st->reset_buf, 0xff, sizeof(st->reset_buf));
init_completion(&st->completion);
mutex_init(&st->lock);
st->spi = spi;
/*
* Xfer: [ XFR1 ] [ XFR2 ]
* Master: 0x7D N ......................
* Slave: ...... DATA1 DATA2 ... DATAN
*/
st->fifo_tx_buf[0] = AD4130_COMMS_READ_MASK | AD4130_FIFO_DATA_REG;
st->fifo_xfer[0].tx_buf = st->fifo_tx_buf;
st->fifo_xfer[0].len = sizeof(st->fifo_tx_buf);
st->fifo_xfer[1].rx_buf = st->fifo_rx_buf;
spi_message_init_with_transfers(&st->fifo_msg, st->fifo_xfer,
ARRAY_SIZE(st->fifo_xfer));
indio_dev->name = AD4130_NAME;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &ad4130_info;
st->regmap = devm_regmap_init(dev, NULL, st, &ad4130_regmap_config);
if (IS_ERR(st->regmap))
return PTR_ERR(st->regmap);
st->regulators[0].supply = "avdd";
st->regulators[1].supply = "iovdd";
st->regulators[2].supply = "refin1";
st->regulators[3].supply = "refin2";
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(st->regulators),
st->regulators);
if (ret)
return dev_err_probe(dev, ret, "Failed to get regulators\n");
ret = regulator_bulk_enable(ARRAY_SIZE(st->regulators), st->regulators);
if (ret)
return dev_err_probe(dev, ret, "Failed to enable regulators\n");
ret = devm_add_action_or_reset(dev, ad4130_disable_regulators, st);
if (ret)
return dev_err_probe(dev, ret,
"Failed to add regulators disable action\n");
ret = ad4130_soft_reset(st);
if (ret)
return ret;
ret = ad4310_parse_fw(indio_dev);
if (ret)
return ret;
ret = ad4130_setup(indio_dev);
if (ret)
return ret;
ret = ad4130_setup_int_clk(st);
if (ret)
return ret;
ad4130_fill_scale_tbls(st);
st->gc.owner = THIS_MODULE;
st->gc.label = AD4130_NAME;
st->gc.base = -1;
st->gc.ngpio = AD4130_MAX_GPIOS;
st->gc.parent = dev;
st->gc.can_sleep = true;
st->gc.init_valid_mask = ad4130_gpio_init_valid_mask;
st->gc.get_direction = ad4130_gpio_get_direction;
st->gc.set = ad4130_gpio_set;
ret = devm_gpiochip_add_data(dev, &st->gc, st);
if (ret)
return ret;
ret = devm_iio_kfifo_buffer_setup_ext(dev, indio_dev,
&ad4130_buffer_ops,
ad4130_fifo_attributes);
if (ret)
return ret;
ret = devm_request_threaded_irq(dev, spi->irq, NULL,
ad4130_irq_handler, IRQF_ONESHOT,
indio_dev->name, indio_dev);
if (ret)
return dev_err_probe(dev, ret, "Failed to request irq\n");
/*
* When the chip enters FIFO mode, IRQ polarity is inverted.
* When the chip exits FIFO mode, IRQ polarity returns to normal.
* See datasheet pages: 65, FIFO Watermark Interrupt section,
* and 71, Bit Descriptions for STATUS Register, RDYB.
* Cache the normal and inverted IRQ triggers to set them when
* entering and exiting FIFO mode.
*/
st->irq_trigger = irq_get_trigger_type(spi->irq);
if (st->irq_trigger & IRQF_TRIGGER_RISING)
st->inv_irq_trigger = IRQF_TRIGGER_FALLING;
else if (st->irq_trigger & IRQF_TRIGGER_FALLING)
st->inv_irq_trigger = IRQF_TRIGGER_RISING;
else
return dev_err_probe(dev, -EINVAL, "Invalid irq flags: %u\n",
st->irq_trigger);
return devm_iio_device_register(dev, indio_dev);
}
static const struct of_device_id ad4130_of_match[] = {
{
.compatible = "adi,ad4130",
},
{ }
};
MODULE_DEVICE_TABLE(of, ad4130_of_match);
static struct spi_driver ad4130_driver = {
.driver = {
.name = AD4130_NAME,
.of_match_table = ad4130_of_match,
},
.probe = ad4130_probe,
};
module_spi_driver(ad4130_driver);
MODULE_AUTHOR("Cosmin Tanislav <cosmin.tanislav@analog.com>");
MODULE_DESCRIPTION("Analog Devices AD4130 SPI driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment