Commit 626c7c35 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

[PATCH] USB: add ohci support for OMAP controller

Patch came from the omap kernel tree at http://linux-omap.bkbits.net/
parent 94ffac86
......@@ -7,7 +7,7 @@ menu "USB support"
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
config USB
tristate "Support for USB"
depends on PCI || SA1111
depends on PCI || SA1111 || ARCH_OMAP1510 || ARCH_OMAP1610
---help---
Universal Serial Bus (USB) is a specification for a serial bus
subsystem which offers higher speeds and more features than the
......
......@@ -684,6 +684,10 @@ MODULE_LICENSE ("GPL");
#include "ohci-sa1111.c"
#endif
#if !(defined(CONFIG_PCI) || defined(CONFIG_SA1111))
#ifdef CONFIG_ARCH_OMAP
#include "ohci-omap.c"
#endif
#if !(defined(CONFIG_PCI) || defined(CONFIG_SA1111) || defined(CONFIG_ARCH_OMAP))
#error "missing bus glue for ohci-hcd"
#endif
/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
*
* OMAP Bus Glue
*
* Written by Christopher Hoover <ch@hpl.hp.com>
* Based on fragments of previous driver by Rusell King et al.
*
* Modified for OMAP from ohci-sa1111.c by Tony Lindgren <tony@atomide.com>
* Based on the 2.4 OMAP OHCI driver originally done by MontaVista Software Inc.
*
* This file is licenced under the GPL.
*/
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/arch/bus.h>
#include <asm/arch/hardware.h>
#include <asm/arch/mux.h>
#include <asm/arch/irqs.h>
#include "ohci-omap.h"
#ifndef CONFIG_ARCH_OMAP
#error "This file is OMAP bus glue. CONFIG_OMAP must be defined."
#endif
extern int usb_disabled(void);
extern int ocpi_enable(void);
/*
* Use the first port only by default. Override with hmc_mode option.
*
* NOTE: Many OMAP-1510 Innovators supposedly have bad wiring for the USB ports
* 1 & 2, so only port 0 will work. To use the OHCI on the first port, use
* the Innovator USB client cable with a client-to-client connector and modify
* either the cable or the hub to feed 5V VBUS back to Innovator. VBUS should
* be the red lead in the cable.
*
* To mount USB hard disk as root, see the patch for do_mounts.c that tries
* remounting the root, and use root=0801 if your root is on sda1. Does not
* work with devfs.
*/
static int default_hmc_mode = 16;
static int hmc_mode = 1234;
/*
* Set the USB host pin multiplexing and the selected HMC mode
*/
static int omap_usb_set_hmc_mode(int hmc_mode)
{
unsigned int val;
switch (hmc_mode) {
case 0:
/* 0: function, 1: disabled, 2: disabled */
omap_cfg_reg(W4_USB_PUEN);
omap_cfg_reg(R18_1510_USB_GPIO0);
break;
case 4:
/* 0: function 1: host 2: host */
omap_cfg_reg(usb1_speed);
omap_cfg_reg(usb1_susp);
omap_cfg_reg(usb1_seo);
omap_cfg_reg(usb1_txen);
omap_cfg_reg(usb1_txd);
omap_cfg_reg(usb1_vp);
omap_cfg_reg(usb1_vm);
omap_cfg_reg(usb1_rcv);
omap_cfg_reg(usb2_susp);
omap_cfg_reg(usb2_seo);
omap_cfg_reg(usb2_txen);
omap_cfg_reg(usb2_txd);
omap_cfg_reg(usb2_vp);
omap_cfg_reg(usb2_vm);
omap_cfg_reg(usb2_rcv);
break;
case 16:
/* 0: host, 1: disabled, 2: disabled */
omap_cfg_reg(W9_USB0_TXEN);
omap_cfg_reg(AA9_USB0_VP);
omap_cfg_reg(Y5_USB0_RCV);
omap_cfg_reg(R9_USB0_VM);
omap_cfg_reg(V6_USB0_TXD);
omap_cfg_reg(W5_USB0_SE0);
break;
default:
printk("Unknown USB host configuration: %i\n", hmc_mode);
return -ENODEV;
}
/* Write the selected HMC mode */
val = readl(MOD_CONF_CTRL_0) & ~HMC_CLEAR;
val |= (hmc_mode << 1);
writel(val, MOD_CONF_CTRL_0);
return 0;
}
/*
* OHCI clock initialization for OMAP-1510 and 1610
*/
static int omap_ohci_clock_power(int on)
{
if (on) {
if (cpu_is_omap_1510()) {
/* Use DPLL, not APLL */
writel(readl(ULPD_APLL_CTRL_REG) & ~APLL_NDPLL_SWITCH,
ULPD_APLL_CTRL_REG);
/* Enable DPLL */
writel(readl(ULPD_DPLL_CTRL_REG) | DPLL_PLL_ENABLE,
ULPD_DPLL_CTRL_REG);
/* Software request for USB 48MHz clock */
writel(readl(ULPD_SOFT_REQ_REG) | SOFT_REQ_REG_REQ,
ULPD_SOFT_REQ_REG);
while (!(readl(ULPD_DPLL_CTRL_REG) & DPLL_LOCK));
}
if (cpu_is_omap_1610()) {
/* Enable OHCI */
writel(readl(ULPD_SOFT_REQ_REG) | SOFT_USB_OTG_REQ,
ULPD_SOFT_REQ_REG);
/* USB host clock request if not using OTG */
writel(readl(ULPD_SOFT_REQ_REG) | SOFT_USB_REQ,
ULPD_SOFT_REQ_REG);
outl(inl(ULPD_STATUS_REQ_REG) | USB_HOST_DPLL_REQ,
ULPD_STATUS_REQ_REG);
}
/* Enable 48MHz clock to USB */
writel(readl(ULPD_CLOCK_CTRL_REG) | USB_MCLK_EN,
ULPD_CLOCK_CTRL_REG);
writel(readl(ARM_IDLECT2) | (1 << EN_LBFREECK) | (1 << EN_LBCK),
ARM_IDLECT2);
writel(readl(MOD_CONF_CTRL_0) | USB_HOST_HHC_UHOST_EN,
MOD_CONF_CTRL_0);
} else {
/* Disable 48MHz clock to USB */
writel(readl(ULPD_CLOCK_CTRL_REG) & ~USB_MCLK_EN,
ULPD_CLOCK_CTRL_REG);
/* FIXME: The DPLL stays on for now */
}
return 0;
}
/*
* Hardware specific transceiver power on/off
*/
static int omap_ohci_transceiver_power(int on)
{
if (on) {
if (omap_is_innovator())
writel(readl(OMAP1510_FPGA_HOST_CTRL) | 0x20,
OMAP1510_FPGA_HOST_CTRL);
} else {
if (omap_is_innovator())
writel(readl(OMAP1510_FPGA_HOST_CTRL) & ~0x20,
OMAP1510_FPGA_HOST_CTRL);
}
return 0;
}
/*
* OMAP-1510 specific Local Bus clock on/off
*/
static int omap_1510_local_bus_power(int on)
{
if (on) {
writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
udelay(200);
} else {
writel(0, OMAP1510_LB_MMU_CTL);
}
return 0;
}
/*
* OMAP-1510 specific Local Bus initialization
* NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
* See also arch/mach-omap/memory.h for __virt_to_bus() and
* __bus_to_virt() which need to match with the physical
* Local Bus address below.
*/
static int omap_1510_local_bus_init(void)
{
unsigned int tlb;
unsigned long lbaddr, physaddr;
writel((readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
OMAP1510_LB_CLOCK_DIV);
/* Configure the Local Bus MMU table */
for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
physaddr = tlb * 0x00100000 + PHYS_OFFSET;
writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
OMAP1510_LB_MMU_CAM_L);
writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
writel(tlb << 4, OMAP1510_LB_MMU_LCK);
writel(0x1, OMAP1510_LB_MMU_LD_TLB);
}
/* Enable the walking table */
writel(readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);
udelay(200);
return 0;
}
/*
* OMAP-1610 specific hardware initialization
*
* Intended to configure OMAP-1610 USB host and OTG ports depending on
* the HMC mode selected.
*
* FIXME: Currently only supports alternate ping group 2 mode, should
* be easy to modify for other configurations once there is some
* hardware to test with.
*/
static int omap_1610_usb_init(int mode)
{
u_int val = 0;
/* Configure the OMAP transceiver settings */
val |= (1 << 8); /* CONF_USB2_UNI TRM p 15-205*/
val |= (4 << 4); /* TRM p 5-59, p 15-157 (1224) */
//val |= (1 << 3); /* Isolate integrated transceiver from port 0 */
val |= (1 << 2); /* Disable pulldown on integrated transceiver DM */
val |= (1 << 1); /* Disable pulldown on integraded transceiver DP */
outl(val, USB_TRANSCEIVER_CTRL);
/* Set the USB0_TRX_MODE */
val = 0;
val &= ~OTG_IDLE_EN;
val &= ~DEV_IDLE_EN;
val &= ~(7 << 16); /* Clear USB0_TRX_MODE */
val |= (3 << 16); /* 0 or 3, 6-wire DAT/SE0, TRM p 15-159 */
outl(val, OTG_SYSCON_1);
/*
* Control via OTG, see TRM p 15-163
*/
val = 0;
//val |= 1; /* REVISIT: Enable OTG = 1 */
/* Control via OTG */
val &= ~HMC_PADEN;
val &= ~OTG_PADEN;
val |= UHOST_EN;
val &= ~0x3f; /* Clear HMC mode */
val |= mode; /* Set HMC mode */
val &= ~(7 << 16); /* Clear ASE0_BRST */
val |= (4 << 16); /* Must be 4 */
val |= USBX_SYNCHRO; /* Must be set */
val |= SRP_VBUS;
outl(val, OTG_SYSCON_2);
/* Enable OTG idle */
//outl(inl(OTG_SYSCON_1) | OTG_IDLE_EN, OTG_SYSCON_1);
return 0;
}
/*-------------------------------------------------------------------------*/
static void omap_start_hc(struct omap_dev *dev)
{
printk(KERN_DEBUG __FILE__
": starting OMAP OHCI USB Controller\n");
/*
* Set the HMC mode for the USB ports
*/
#if 0
/* See note about the Innovator wiring above */
if (omap_is_innovator())
hmc_mode = 4; /* 0: function 1: host 2: host */
#endif
if (cpu_is_omap_1610())
ocpi_enable();
omap_usb_set_hmc_mode(hmc_mode);
omap_ohci_clock_power(1);
omap_ohci_transceiver_power(1);
if (cpu_is_omap_1510()) {
omap_1510_local_bus_power(1);
omap_1510_local_bus_init();
}
if (cpu_is_omap_1610())
omap_1610_usb_init(hmc_mode);
//omap_enable_device(dev);
}
static void omap_stop_hc(struct omap_dev *dev)
{
printk(KERN_DEBUG __FILE__
": stopping OMAP OHCI USB Controller\n");
/*
* FIXME: Put the USB host controller into reset.
*/
/*
* FIXME: Stop the USB clock.
*/
//omap_disable_device(dev);
}
/*-------------------------------------------------------------------------*/
static irqreturn_t usb_hcd_omap_hcim_irq (int irq, void *__hcd, struct pt_regs * r)
{
struct usb_hcd *hcd = __hcd;
return usb_hcd_irq(irq, hcd, r);
}
/*-------------------------------------------------------------------------*/
void usb_hcd_omap_remove (struct usb_hcd *, struct omap_dev *);
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
/**
* usb_hcd_omap_probe - initialize OMAP-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*
* Store this function in the HCD's struct pci_driver as probe().
*/
int usb_hcd_omap_probe (const struct hc_driver *driver,
struct usb_hcd **hcd_out,
struct omap_dev *dev)
{
int retval;
struct usb_hcd *hcd = 0;
if (!request_mem_region(dev->res.start,
dev->res.end - dev->res.start + 1, hcd_name)) {
dbg("request_mem_region failed");
return -EBUSY;
}
omap_start_hc(dev);
hcd = driver->hcd_alloc ();
if (hcd == NULL){
dbg ("hcd_alloc failed");
retval = -ENOMEM;
goto err1;
}
hcd->driver = (struct hc_driver *) driver;
hcd->description = driver->description;
hcd->irq = dev->irq[0];
hcd->regs = dev->mapbase;
hcd->pdev = OMAP_FAKE_PCIDEV;
hcd->self.controller = &dev->dev;
hcd->controller = hcd->self.controller;
retval = hcd_buffer_create (hcd);
if (retval != 0) {
dbg ("pool alloc fail");
goto err1;
}
retval = request_irq (hcd->irq,
usb_hcd_omap_hcim_irq,
SA_INTERRUPT, hcd->description, hcd);
if (retval != 0) {
dbg("request_irq failed");
retval = -EBUSY;
goto err2;
}
info ("%s (OMAP) at 0x%p, irq %d\n",
hcd->description, hcd->regs, hcd->irq);
usb_bus_init (&hcd->self);
hcd->self.op = &usb_hcd_operations;
hcd->self.hcpriv = (void *) hcd;
hcd->self.bus_name = "omap";
hcd->product_desc = "OMAP OHCI";
INIT_LIST_HEAD (&hcd->dev_list);
usb_register_bus (&hcd->self);
if ((retval = driver->start (hcd)) < 0)
{
usb_hcd_omap_remove(hcd, dev);
return retval;
}
*hcd_out = hcd;
return 0;
err2:
hcd_buffer_destroy (hcd);
if (hcd)
driver->hcd_free(hcd);
err1:
omap_stop_hc(dev);
release_mem_region(dev->res.start, dev->res.end - dev->res.start + 1);
return retval;
}
/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
/**
* usb_hcd_omap_remove - shutdown processing for OMAP-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_hcd_omap_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
*
*/
void usb_hcd_omap_remove (struct usb_hcd *hcd, struct omap_dev *dev)
{
struct usb_device *hub;
void *base;
info ("remove: %s, state %x", hcd->self.bus_name, hcd->state);
if (in_interrupt ())
BUG ();
hub = hcd->self.root_hub;
hcd->state = USB_STATE_QUIESCING;
dbg ("%s: roothub graceful disconnect", hcd->self.bus_name);
usb_disconnect (&hub);
hcd->driver->stop (hcd);
hcd_buffer_destroy (hcd);
hcd->state = USB_STATE_HALT;
free_irq (hcd->irq, hcd);
usb_deregister_bus (&hcd->self);
base = hcd->regs;
hcd->driver->hcd_free (hcd);
omap_stop_hc(dev);
release_mem_region(dev->res.start, dev->res.end - dev->res.start + 1);
}
/*-------------------------------------------------------------------------*/
static int __devinit
ohci_omap_start (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ret;
if (hcd->pdev) {
ohci->hcca = pci_alloc_consistent (hcd->pdev,
sizeof *ohci->hcca, &ohci->hcca_dma);
if (!ohci->hcca)
return -ENOMEM;
}
memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
if ((ret = ohci_mem_init (ohci)) < 0) {
ohci_stop (hcd);
return ret;
}
ohci->regs = hcd->regs;
if (hc_reset (ohci) < 0) {
ohci_stop (hcd);
return -ENODEV;
}
if (hc_start (ohci) < 0) {
err ("can't start %s", ohci->hcd.self.bus_name);
ohci_stop (hcd);
return -EBUSY;
}
create_debug_files (ohci);
#ifdef DEBUG
ohci_dump (ohci, 1);
#endif
return 0;
}
/*-------------------------------------------------------------------------*/
static const struct hc_driver ohci_omap_hc_driver = {
.description = hcd_name,
/*
* generic hardware linkage
*/
.irq = ohci_irq,
.flags = HCD_USB11,
/*
* basic lifecycle operations
*/
.start = ohci_omap_start,
#ifdef CONFIG_PM
/* suspend: ohci_omap_suspend, -- tbd */
/* resume: ohci_omap_resume, -- tbd */
#endif
.stop = ohci_stop,
/*
* memory lifecycle (except per-request)
*/
.hcd_alloc = ohci_hcd_alloc,
.hcd_free = ohci_hcd_free,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
/*
* scheduling support
*/
.get_frame_number = ohci_get_frame,
/*
* root hub support
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
};
/*-------------------------------------------------------------------------*/
static int ohci_hcd_omap_drv_probe(struct omap_dev *dev)
{
struct usb_hcd *hcd = NULL;
int ret;
if (usb_disabled())
return -ENODEV;
ret = usb_hcd_omap_probe(&ohci_omap_hc_driver, &hcd, dev);
if (ret == 0)
omap_set_drvdata(dev, hcd);
return ret;
}
static int ohci_hcd_omap_drv_remove(struct omap_dev *dev)
{
struct usb_hcd *hcd = omap_get_drvdata(dev);
usb_hcd_omap_remove(hcd, dev);
omap_set_drvdata(dev, NULL);
return 0;
}
/*
* Driver definition to register with the OMAP bus
*/
static struct omap_driver ohci_hcd_omap_driver = {
.drv = {
.name = OMAP_OHCI_NAME,
},
.devid = OMAP_OCP_DEVID_USB,
.busid = OMAP_BUS_OCP,
.clocks = 0,
.probe = ohci_hcd_omap_drv_probe,
.remove = ohci_hcd_omap_drv_remove,
};
/* Any dma_mask must be set for OHCI to work */
static u64 omap_dmamask = 0xffffffffUL;
/*
* Device definition to match the driver above
*/
static struct omap_dev ohci_hcd_omap_device = {
.name = OMAP_OHCI_NAME,
.devid = OMAP_OCP_DEVID_USB,
.busid = OMAP_BUS_OCP,
.mapbase = (void *)OMAP_OHCI_BASE,
.dma_mask = &omap_dmamask, /* Needed only for OHCI */
.res = {
.start = OMAP_OHCI_BASE,
.end = OMAP_OHCI_BASE + OMAP_OHCI_SIZE,
},
.irq = {
INT_OHCI,
},
};
static int __init ohci_hcd_omap_init (void)
{
int ret;
dbg (DRIVER_INFO " (OMAP)");
dbg ("block sizes: ed %d td %d\n",
sizeof (struct ed), sizeof (struct td));
if (hmc_mode < 0 || hmc_mode > 25)
hmc_mode = default_hmc_mode;
/* Register the driver with OMAP bus */
ret = omap_driver_register(&ohci_hcd_omap_driver);
if (ret != 0)
return -ENODEV;
/* Register the device with OMAP bus */
ret = omap_device_register(&ohci_hcd_omap_device);
if (ret != 0) {
omap_driver_unregister(&ohci_hcd_omap_driver);
return -ENODEV;
}
return ret;
}
MODULE_PARM(hmc_mode, "hmc_mode");
static void __exit ohci_hcd_omap_cleanup (void)
{
omap_device_unregister(&ohci_hcd_omap_device);
omap_driver_unregister(&ohci_hcd_omap_driver);
}
module_init (ohci_hcd_omap_init);
module_exit (ohci_hcd_omap_cleanup);
/*
* linux/drivers/usb/host/ohci-omap.h
*
* OMAP OHCI USB controller specific defines
*/
/* OMAP USB OHCI common defines */
#define OMAP_OHCI_NAME "omap-ohci"
#define OMAP_OHCI_BASE 0xfffba000
#define OMAP_OHCI_SIZE 4096
#define HMC_CLEAR (0x3f << 1)
#define APLL_NDPLL_SWITCH 0x0001
#define DPLL_PLL_ENABLE 0x0010
#define DPLL_LOCK 0x0001
#define SOFT_REQ_REG_REQ 0x0001
#define USB_MCLK_EN 0x0010
#define USB_HOST_HHC_UHOST_EN 0x00000200
#define SOFT_USB_OTG_REQ (1 << 8)
#define SOFT_USB_REQ (1 << 3)
#define STATUS_REQ_REG 0xfffe0840
#define USB_HOST_DPLL_REQ (1 << 8)
#define SOFT_DPLL_REQ (1 << 0)
/* OMAP-1510 USB OHCI defines */
#define OMAP1510_LB_MEMSIZE 32 /* Should be same as SDRAM size */
#define OMAP1510_LB_CLOCK_DIV 0xfffec10c
#define OMAP1510_LB_MMU_CTL 0xfffec208
#define OMAP1510_LB_MMU_LCK 0xfffec224
#define OMAP1510_LB_MMU_LD_TLB 0xfffec228
#define OMAP1510_LB_MMU_CAM_H 0xfffec22c
#define OMAP1510_LB_MMU_CAM_L 0xfffec230
#define OMAP1510_LB_MMU_RAM_H 0xfffec234
#define OMAP1510_LB_MMU_RAM_L 0xfffec238
/* OMAP-1610 USB OHCI defines */
#define USB_TRANSCEIVER_CTRL 0xfffe1064
#define OTG_REV 0xfffb0400
#define OTG_SYSCON_1 0xfffb0404
#define OTG_IDLE_EN (1 << 15)
#define DEV_IDLE_EN (1 << 13)
#define OTG_SYSCON_2 0xfffb0408
#define OTG_CTRL 0xfffb040c
#define OTG_IRQ_EN 0xfffb0410
#define OTG_IRQ_SRC 0xfffb0414
#define OTG_EN (1 << 31)
#define USBX_SYNCHRO (1 << 30)
#define SRP_VBUS (1 << 12)
#define OTG_PADEN (1 << 10)
#define HMC_PADEN (1 << 9)
#define UHOST_EN (1 << 8)
/* Hardware specific defines */
#define OMAP1510_FPGA_HOST_CTRL 0xe800020c
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment