Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize

MAINTAINERS

@@ -117,20 +117,20 @@ Maintainers List (try to look for most precise areas first)
 M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/3c505*
+F:	drivers/net/ethernet/i825xx/3c505*
 
 3C59X NETWORK DRIVER
 M:	Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/vortex.txt
-F:	drivers/net/3c59x.c
+F:	drivers/net/ethernet/3com/3c59x.c
 
 3CR990 NETWORK DRIVER
 M:	David Dillow <dave@thedillows.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/typhoon*
+F:	drivers/net/ethernet/3com/typhoon*
 
 3WARE SAS/SATA-RAID SCSI DRIVERS (3W-XXXX, 3W-9XXX, 3W-SAS)
 M:	Adam Radford <linuxraid@lsi.com>
@@ -170,8 +170,7 @@ F:	include/linux/serial_8250.h
 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
 L:	netdev@vger.kernel.org
 S:	Orphan / Obsolete
-F:	drivers/net/*8390*
-F:	drivers/net/ax88796.c
+F:	drivers/net/ethernet/8390/
 
 9P FILE SYSTEM
 M:	Eric Van Hensbergen <ericvh@gmail.com>
@@ -214,7 +213,7 @@ ACENIC DRIVER
 M:	Jes Sorensen <jes@trained-monkey.org>
 L:	linux-acenic@sunsite.dk
 S:	Maintained
-F:	drivers/net/acenic*
+F:	drivers/net/ethernet/3com/acenic*
 
 ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
 M:	Peter Feuerer <peter@piie.net>
@@ -746,7 +745,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	arch/arm/mach-ebsa110/
-F:	drivers/net/arm/am79c961a.*
+F:	drivers/net/ethernet/amd/am79c961a.*
 
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
 M:	Daniel Ribeiro <drwyrm@gmail.com>
@@ -1015,7 +1014,7 @@ F:	arch/arm/include/asm/hardware/ioc.h
 F:	arch/arm/include/asm/hardware/iomd.h
 F:	arch/arm/include/asm/hardware/memc.h
 F:	arch/arm/mach-rpc/
-F:	drivers/net/arm/ether*
+F:	drivers/net/arm/ether3*
 F:	drivers/scsi/arm/
 
 ARM/SHARK MACHINE SUPPORT
@@ -1527,27 +1526,27 @@ BROADCOM B44 10/100 ETHERNET DRIVER
 M:	Gary Zambrano <zambrano@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/b44.*
+F:	drivers/net/ethernet/broadcom/b44.*
 
 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
 M:	Michael Chan <mchan@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/bnx2.*
-F:	drivers/net/bnx2_*
+F:	drivers/net/ethernet/broadcom/bnx2.*
+F:	drivers/net/ethernet/broadcom/bnx2_*
 
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
 M:	Eilon Greenstein <eilong@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/bnx2x/
+F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 M:	Matt Carlson <mcarlson@broadcom.com>
 M:	Michael Chan <mchan@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/tg3.*
+F:	drivers/net/ethernet/broadcom/tg3.*
 
 BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
 M:	Brett Rudley <brudley@broadcom.com>
@@ -1995,7 +1994,7 @@ M:	Divy Le Ray <divy@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
-F:	drivers/net/cxgb3/
+F:	drivers/net/ethernet/chelsio/cxgb3/
 
 CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
 M:	Steve Wise <swise@chelsio.com>
@@ -2009,7 +2008,7 @@ M:	Dimitris Michailidis <dm@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
-F:	drivers/net/cxgb4/
+F:	drivers/net/ethernet/chelsio/cxgb4/
 
 CXGB4 IWARP RNIC DRIVER (IW_CXGB4)
 M:	Steve Wise <swise@chelsio.com>
@@ -2023,7 +2022,7 @@ M:	Casey Leedom <leedom@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
-F:	drivers/net/cxgb4vf/
+F:	drivers/net/ethernet/chelsio/cxgb4vf/
 
 STMMAC ETHERNET DRIVER
 M:	Giuseppe Cavallaro <peppe.cavallaro@st.com>
@@ -2511,7 +2510,7 @@ ETHEREXPRESS-16 NETWORK DRIVER
 M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/eexpress.*
+F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
 M:	Stephen Hemminger <shemminger@linux-foundation.org>
@@ -3341,13 +3340,13 @@ M:	Bruce Allan <bruce.w.allan@intel.com>
 M:	Carolyn Wyborny <carolyn.wyborny@intel.com>
 M:	Don Skidmore <donald.c.skidmore@intel.com>
 M:	Greg Rose <gregory.v.rose@intel.com>
-M:	PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M:	Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
 M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://e1000.sourceforge.net/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-2.6.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git
 S:	Supported
 F:	Documentation/networking/e100.txt
 F:	Documentation/networking/e1000.txt
@@ -3357,14 +3356,7 @@ F:	Documentation/networking/igbvf.txt
 F:	Documentation/networking/ixgb.txt
 F:	Documentation/networking/ixgbe.txt
 F:	Documentation/networking/ixgbevf.txt
-F:	drivers/net/e100.c
-F:	drivers/net/e1000/
-F:	drivers/net/e1000e/
-F:	drivers/net/igb/
-F:	drivers/net/igbvf/
-F:	drivers/net/ixgb/
-F:	drivers/net/ixgbe/
-F:	drivers/net/ixgbevf/
+F:	drivers/net/ethernet/intel/
 
 INTEL MRST PMU DRIVER
 M:	Len Brown <len.brown@intel.com>
@@ -4507,7 +4499,7 @@ M:	Amit Kumar Salecha <amit.salecha@qlogic.com>
 L:	netdev@vger.kernel.org
 W:	http://www.qlogic.com
 S:	Supported
-F:	drivers/net/netxen/
+F:	drivers/net/ethernet/qlogic/netxen/
 
 NFS, SUNRPC, AND LOCKD CLIENTS
 M:	Trond Myklebust <Trond.Myklebust@netapp.com>
@@ -4941,7 +4933,7 @@ PCNET32 NETWORK DRIVER
 M:	Don Fry <pcnet32@frontier.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/pcnet32.c
+F:	drivers/net/ethernet/amd/pcnet32.c
 
 PCRYPT PARALLEL CRYPTO ENGINE
 M:	Steffen Klassert <steffen.klassert@secunet.com>
@@ -5253,7 +5245,7 @@ M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/LICENSE.qla3xxx
-F:	drivers/net/qla3xxx.*
+F:	drivers/net/ethernet/qlogic/qla3xxx.*
 
 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
 M:	Amit Kumar Salecha <amit.salecha@qlogic.com>
@@ -5261,7 +5253,7 @@ M:	Anirban Chakraborty <anirban.chakraborty@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/qlcnic/
+F:	drivers/net/ethernet/qlogic/qlcnic/
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
 M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
@@ -5269,7 +5261,7 @@ M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/qlge/
+F:	drivers/net/ethernet/qlogic/qlge/
 
 QNX4 FILESYSTEM
 M:	Anders Larsen <al@alarsen.net>
@@ -5877,7 +5869,7 @@ F:	mm/sl?b.c
 SMC91x ETHERNET DRIVER
 M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Odd Fixes
-F:	drivers/net/smc91x.*
+F:	drivers/net/ethernet/smsc/smc91x.*
 
 SMM665 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
@@ -5912,13 +5904,13 @@ M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	include/linux/smsc911x.h
-F:	drivers/net/smsc911x.*
+F:	drivers/net/ethernet/smsc/smsc911x.*
 
 SMSC9420 PCI ETHERNET DRIVER
 M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/smsc9420.*
+F:	drivers/net/ethernet/smsc/smsc9420.*
 
 SN-IA64 (Itanium) SUB-PLATFORM
 M:	Jes Sorensen <jes@sgi.com>
@@ -6568,7 +6560,7 @@ W:	http://uclinux-h8.sourceforge.jp/
 S:	Supported
 F:	arch/h8300/
 F:	drivers/ide/ide-h8300.c
-F:	drivers/net/ne-h8300.c
+F:	drivers/net/ethernet/8390/ne-h8300.c
 
 UDF FILESYSTEM
 M:	Jan Kara <jack@suse.cz>

drivers/infiniband/hw/cxgb3/Makefile

-ccflags-y := -Idrivers/net/cxgb3
+ccflags-y := -Idrivers/net/ethernet/chelsio/cxgb3
 
 obj-$(CONFIG_INFINIBAND_CXGB3) += iw_cxgb3.o
 

drivers/infiniband/hw/cxgb4/Makefile

-ccflags-y := -Idrivers/net/cxgb4
+ccflags-y := -Idrivers/net/ethernet/chelsio/cxgb4
 
 obj-$(CONFIG_INFINIBAND_CXGB4) += iw_cxgb4.o
 

drivers/net/Makefile

 #
-# Makefile for the Linux network (ethercard) device drivers.
+# Makefile for the Linux network device drivers.
 #
 
 obj-$(CONFIG_MII) += mii.o
@@ -10,19 +10,8 @@ obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
 obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
 obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
 
-obj-$(CONFIG_E1000) += e1000/
-obj-$(CONFIG_E1000E) += e1000e/
 obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
-obj-$(CONFIG_IGB) += igb/
-obj-$(CONFIG_IGBVF) += igbvf/
-obj-$(CONFIG_IXGBE) += ixgbe/
-obj-$(CONFIG_IXGBEVF) += ixgbevf/
-obj-$(CONFIG_IXGB) += ixgb/
 obj-$(CONFIG_IP1000) += ipg.o
-obj-$(CONFIG_CHELSIO_T1) += chelsio/
-obj-$(CONFIG_CHELSIO_T3) += cxgb3/
-obj-$(CONFIG_CHELSIO_T4) += cxgb4/
-obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf/
 obj-$(CONFIG_EHEA) += ehea/
 obj-$(CONFIG_CAN) += can/
 obj-$(CONFIG_BONDING) += bonding/
@@ -56,7 +45,6 @@ obj-$(CONFIG_PLIP) += plip.o
 obj-$(CONFIG_ROADRUNNER) += rrunner.o
 
 obj-$(CONFIG_HAPPYMEAL) += sunhme.o
-obj-$(CONFIG_SUNLANCE) += sunlance.o
 obj-$(CONFIG_SUNQE) += sunqe.o
 obj-$(CONFIG_SUNBMAC) += sunbmac.o
 obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
@@ -66,28 +54,15 @@ obj-$(CONFIG_SUNVNET) += sunvnet.o
 obj-$(CONFIG_MACE) += mace.o
 obj-$(CONFIG_BMAC) += bmac.o
 
-obj-$(CONFIG_VORTEX) += 3c59x.o
-obj-$(CONFIG_TYPHOON) += typhoon.o
-obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
-obj-$(CONFIG_PCNET32) += pcnet32.o
-obj-$(CONFIG_E100) += e100.o
 obj-$(CONFIG_TLAN) += tlan.o
-obj-$(CONFIG_EPIC100) += epic100.o
-obj-$(CONFIG_SMSC9420) += smsc9420.o
 obj-$(CONFIG_SIS190) += sis190.o
 obj-$(CONFIG_SIS900) += sis900.o
 obj-$(CONFIG_R6040) += r6040.o
 obj-$(CONFIG_YELLOWFIN) += yellowfin.o
-obj-$(CONFIG_ACENIC) += acenic.o
 obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
 obj-$(CONFIG_NATSEMI) += natsemi.o
 obj-$(CONFIG_NS83820) += ns83820.o
-obj-$(CONFIG_STNIC) += stnic.o 8390.o
 obj-$(CONFIG_FEALNX) += fealnx.o
-obj-$(CONFIG_TIGON3) += tg3.o
-obj-$(CONFIG_BNX2) += bnx2.o
-obj-$(CONFIG_CNIC) += cnic.o
-obj-$(CONFIG_BNX2X) += bnx2x/
 spidernet-y += spider_net.o spider_net_ethtool.o
 obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
 obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
@@ -117,35 +92,13 @@ obj-$(CONFIG_HAMACHI) += hamachi.o
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_SEEQ8005) += seeq8005.o
 obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_MAC8390) += mac8390.o
-obj-$(CONFIG_APNE) += apne.o 8390.o
-obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
 obj-$(CONFIG_HP100) += hp100.o
-obj-$(CONFIG_SMC9194) += smc9194.o
 obj-$(CONFIG_FEC) += fec.o
 obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
 ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
 	obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
 endif
-obj-$(CONFIG_WD80x3) += wd.o 8390.o
-obj-$(CONFIG_EL2) += 3c503.o 8390p.o
-obj-$(CONFIG_NE2000) += ne.o 8390p.o
-obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
-obj-$(CONFIG_HPLAN) += hp.o 8390p.o
-obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
-obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
-obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
-obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
-obj-$(CONFIG_E2100) += e2100.o 8390.o
-obj-$(CONFIG_ES3210) += es3210.o 8390.o
-obj-$(CONFIG_LNE390) += lne390.o 8390.o
-obj-$(CONFIG_NE3210) += ne3210.o 8390.o
-obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
-obj-$(CONFIG_B44) += b44.o
 obj-$(CONFIG_FORCEDETH) += forcedeth.o
-obj-$(CONFIG_NE_H8300) += ne-h8300.o
-obj-$(CONFIG_AX88796) += ax88796.o
-obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
 obj-$(CONFIG_FTGMAC100) += ftgmac100.o
 obj-$(CONFIG_FTMAC100) += ftmac100.o
 
@@ -154,9 +107,6 @@ obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
 ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
 obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
 obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
-obj-$(CONFIG_QLA3XXX) += qla3xxx.o
-obj-$(CONFIG_QLCNIC) += qlcnic/
-obj-$(CONFIG_QLGE) += qlge/
 
 obj-$(CONFIG_PPP) += ppp_generic.o
 obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
@@ -180,59 +130,25 @@ obj-$(CONFIG_MACVLAN) += macvlan.o
 obj-$(CONFIG_MACVTAP) += macvtap.o
 obj-$(CONFIG_DE600) += de600.o
 obj-$(CONFIG_DE620) += de620.o
-obj-$(CONFIG_LANCE) += lance.o
-obj-$(CONFIG_SUN3_82586) += sun3_82586.o
-obj-$(CONFIG_SUN3LANCE) += sun3lance.o
 obj-$(CONFIG_DEFXX) += defxx.o
 obj-$(CONFIG_SGISEEQ) += sgiseeq.o
 obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
 obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_EL1) += 3c501.o
-obj-$(CONFIG_EL16) += 3c507.o
-obj-$(CONFIG_ELMC) += 3c523.o
 obj-$(CONFIG_IBMLANA) += ibmlana.o
-obj-$(CONFIG_ELMC_II) += 3c527.o
-obj-$(CONFIG_EL3) += 3c509.o
-obj-$(CONFIG_3C515) += 3c515.o
-obj-$(CONFIG_EEXPRESS) += eexpress.o
-obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
 obj-$(CONFIG_8139CP) += 8139cp.o
 obj-$(CONFIG_8139TOO) += 8139too.o
-obj-$(CONFIG_ZNET) += znet.o
 obj-$(CONFIG_CPMAC) += cpmac.o
-obj-$(CONFIG_DEPCA) += depca.o
 obj-$(CONFIG_EWRK3) += ewrk3.o
 obj-$(CONFIG_ATP) += atp.o
 obj-$(CONFIG_NI5010) += ni5010.o
-obj-$(CONFIG_NI52) += ni52.o
-obj-$(CONFIG_NI65) += ni65.o
-obj-$(CONFIG_ELPLUS) += 3c505.o
-obj-$(CONFIG_AC3200) += ac3200.o 8390.o
-obj-$(CONFIG_APRICOT) += 82596.o
-obj-$(CONFIG_LASI_82596) += lasi_82596.o
-obj-$(CONFIG_SNI_82596) += sni_82596.o
-obj-$(CONFIG_MVME16x_NET) += 82596.o
-obj-$(CONFIG_BVME6000_NET) += 82596.o
 obj-$(CONFIG_SC92031) += sc92031.o
 
-# This is also a 82596 and should probably be merged
-obj-$(CONFIG_LP486E) += lp486e.o
-
 obj-$(CONFIG_ETH16I) += eth16i.o
-obj-$(CONFIG_ZORRO8390) += zorro8390.o
-obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
-obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
 obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_KORINA) += korina.o
 obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
-obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
 obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
 obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_DECLANCE) += declance.o
-obj-$(CONFIG_ATARILANCE) += atarilance.o
-obj-$(CONFIG_A2065) += a2065.o
-obj-$(CONFIG_HYDRA) += hydra.o
-obj-$(CONFIG_ARIADNE) += ariadne.o
 obj-$(CONFIG_CS89x0) += cs89x0.o
 obj-$(CONFIG_MACSONIC) += macsonic.o
 obj-$(CONFIG_MACMACE) += macmace.o
@@ -242,14 +158,10 @@ obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
 obj-$(CONFIG_DL2K) += dl2k.o
 obj-$(CONFIG_R8169) += r8169.o
-obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
 obj-$(CONFIG_IBMVETH) += ibmveth.o
 obj-$(CONFIG_S2IO) += s2io.o
 obj-$(CONFIG_VXGE) += vxge/
 obj-$(CONFIG_MYRI10GE) += myri10ge/
-obj-$(CONFIG_SMC91X) += smc91x.o
-obj-$(CONFIG_SMC911X) += smc911x.o
-obj-$(CONFIG_SMSC911X) += smsc911x.o
 obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
 obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o
@@ -269,6 +181,7 @@ obj-$(CONFIG_S6GMAC) += s6gmac.o
 
 obj-$(CONFIG_ARM) += arm/
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
+obj-$(CONFIG_ETHERNET) += ethernet/
 obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
 obj-$(CONFIG_ARCNET) += arcnet/
@@ -295,7 +208,6 @@ obj-$(CONFIG_NETCONSOLE) += netconsole.o
 
 obj-$(CONFIG_FS_ENET) += fs_enet/
 
-obj-$(CONFIG_NETXEN_NIC) += netxen/
 obj-$(CONFIG_NIU) += niu.o
 obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
 obj-$(CONFIG_SFC) += sfc/

drivers/net/arm/Kconfig

@@ -2,20 +2,6 @@
 # Acorn Network device configuration
 #  These are for Acorn's Expansion card network interfaces
 #
-config ARM_AM79C961A
-	bool "ARM EBSA110 AM79C961A support"
-	depends on ARM && ARCH_EBSA110
-	select CRC32
-	help
-	  If you wish to compile a kernel for the EBSA-110, then you should
-	  always answer Y to this.
-
-config ARM_ETHER1
-	tristate "Acorn Ether1 support"
-	depends on ARM && ARCH_ACORN
-	help
-	  If you have an Acorn system with one of these (AKA25) network cards,
-	  you should say Y to this option if you wish to use it with Linux.
 
 config ARM_ETHER3
 	tristate "Acorn/ANT Ether3 support"
@@ -24,14 +10,6 @@ config ARM_ETHER3
 	  If you have an Acorn system with one of these network cards, you
 	  should say Y to this option if you wish to use it with Linux.
 
-config ARM_ETHERH
-	tristate "I-cubed EtherH/ANT EtherM support"
-	depends on ARM && ARCH_ACORN
-	select CRC32
-	help
-	  If you have an Acorn system with one of these network cards, you
-	  should say Y to this option if you wish to use it with Linux.
-
 config ARM_AT91_ETHER
 	tristate "AT91RM9200 Ethernet support"
 	depends on ARM && ARCH_AT91RM9200

drivers/net/arm/Makefile

@@ -3,10 +3,7 @@
 # Makefile for the ARM network device drivers
 #
 
-obj-$(CONFIG_ARM_AM79C961A)	+= am79c961a.o
-obj-$(CONFIG_ARM_ETHERH)	+= etherh.o
 obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
-obj-$(CONFIG_ARM_ETHER1)	+= ether1.o
 obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
 obj-$(CONFIG_ARM_KS8695_ETHER)	+= ks8695net.o
 obj-$(CONFIG_EP93XX_ETH)	+= ep93xx_eth.o

drivers/net/ethernet/3com/Kconfig

+#
+# 3Com Ethernet device configuration
+#
+
+config NET_VENDOR_3COM
+	bool "3Com devices"
+	depends on ISA || EISA || MCA || PCI || PCMCIA
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about 3Com cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_3COM
+
+config EL1
+	tristate "3c501 \"EtherLink\" support"
+	depends on ISA
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Also, consider buying a
+	  new card, since the 3c501 is slow, broken, and obsolete: you will
+	  have problems.  Some people suggest to ping ("man ping") a nearby
+	  machine every minute ("man cron") when using this card.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c501.
+
+config EL3
+	tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
+	depends on (ISA || EISA || MCA)
+	---help---
+	  If you have a network (Ethernet) card belonging to the 3Com
+	  EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
+	  from <http://www.tldp.org/docs.html#howto>.
+
+	  If your card is not working you may need to use the DOS
+	  setup disk to disable Plug & Play mode, and to select the default
+	  media type.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c509.
+
+config 3C515
+	tristate "3c515 ISA \"Fast EtherLink\""
+	depends on (ISA || EISA) && ISA_DMA_API
+	---help---
+	  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
+	  network card, say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c515.
+
+config PCMCIA_3C574
+	tristate "3Com 3c574 PCMCIA support"
+	depends on PCMCIA
+	---help---
+	  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
+	  (PC-card) Fast Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called 3c574_cs.  If unsure, say N.
+
+config PCMCIA_3C589
+	tristate "3Com 3c589 PCMCIA support"
+	depends on PCMCIA
+	---help---
+	  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
+	  (PC-card) Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called 3c589_cs.  If unsure, say N.
+
+config VORTEX
+	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
+	depends on (PCI || EISA)
+	select MII
+	---help---
+	  This option enables driver support for a large number of 10Mbps and
+	  10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
+
+	  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
+	  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
+	  "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
+	  "Tornado"   (3c905)                                  PCI
+	  "Hurricane" (3c555/3cSOHO)                           PCI
+
+	  If you have such a card, say Y and read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>. More
+	  specific information is in
+	  <file:Documentation/networking/vortex.txt> and in the comments at
+	  the beginning of <file:drivers/net/3c59x.c>.
+
+	  To compile this support as a module, choose M here.
+
+config TYPHOON
+	tristate "3cr990 series \"Typhoon\" support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This option enables driver support for the 3cr990 series of cards:
+
+	  3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
+	  3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
+	  3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
+
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called typhoon.
+
+config ACENIC
+	tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
+	depends on PCI
+	---help---
+	  Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
+	  GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
+	  adapter. The driver allows for using the Jumbo Frame option (9000
+	  bytes/frame) however it requires that your switches can handle this
+	  as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
+	  line.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acenic.
+
+config ACENIC_OMIT_TIGON_I
+	bool "Omit support for old Tigon I based AceNICs"
+	depends on ACENIC
+	---help---
+	  Say Y here if you only have Tigon II based AceNICs and want to leave
+	  out support for the older Tigon I based cards which are no longer
+	  being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
+	  version)).  This will reduce the size of the driver object by
+	  app. 100KB.  If you are not sure whether your card is a Tigon I or a
+	  Tigon II, say N here.
+
+	  The safe and default value for this is N.
+
+endif # NET_VENDOR_3COM

drivers/net/ethernet/3com/Makefile

+#
+# Makefile for the 3Com Ethernet device drivers
+#
+
+obj-$(CONFIG_EL1) += 3c501.o
+obj-$(CONFIG_EL3) += 3c509.o
+obj-$(CONFIG_3C515) += 3c515.o
+obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o
+obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o
+obj-$(CONFIG_VORTEX) += 3c59x.o
+obj-$(CONFIG_ACENIC) += acenic.o
+obj-$(CONFIG_TYPHOON) += typhoon.o

drivers/net/ethernet/8390/Makefile

+#
+# Makefile for the 8390 network device drivers.
+#
+
+obj-$(CONFIG_MAC8390) += mac8390.o
+obj-$(CONFIG_AC3200) += ac3200.o 8390.o
+obj-$(CONFIG_APNE) += apne.o 8390.o
+obj-$(CONFIG_ARM_ETHERH) += etherh.o
+obj-$(CONFIG_AX88796) += ax88796.o
+obj-$(CONFIG_E2100) += e2100.o 8390.o
+obj-$(CONFIG_EL2) += 3c503.o 8390p.o
+obj-$(CONFIG_ES3210) += es3210.o 8390.o
+obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
+obj-$(CONFIG_HPLAN) += hp.o 8390p.o
+obj-$(CONFIG_HYDRA) += hydra.o 8390.o
+obj-$(CONFIG_LNE390) += lne390.o 8390.o
+obj-$(CONFIG_NE2000) += ne.o 8390p.o
+obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
+obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
+obj-$(CONFIG_NE3210) += ne3210.o 8390.o
+obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
+obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o
+obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o
+obj-$(CONFIG_STNIC) += stnic.o 8390.o
+obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
+obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
+obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
+obj-$(CONFIG_WD80x3) += wd.o 8390.o
+obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o

drivers/net/pcmcia/axnet_cs.c → drivers/net/ethernet/8390/axnet_cs.c

@@ -38,7 +38,7 @@
 #include <linux/etherdevice.h>
 #include <linux/crc32.h>
 #include <linux/mii.h>
-#include "../8390.h"
+#include "8390.h"
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>

drivers/net/arm/etherh.c → drivers/net/ethernet/8390/etherh.c

@@ -65,7 +65,7 @@
 static char version[] __initdata =
 	"EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";
 
-#include "../lib8390.c"
+#include "lib8390.c"
 
 static unsigned int net_debug = NET_DEBUG;
 

drivers/net/pcmcia/pcnet_cs.c → drivers/net/ethernet/8390/pcnet_cs.c

@@ -41,7 +41,7 @@
 #include <linux/log2.h>
 #include <linux/etherdevice.h>
 #include <linux/mii.h>
-#include "../8390.h"
+#include "8390.h"
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>

drivers/net/ethernet/Kconfig

+#
+# Ethernet LAN device configuration
+#
+
+menuconfig ETHERNET
+	bool "Ethernet driver support"
+	depends on NET
+	default y
+	---help---
+	  This section contains all the Ethernet device drivers.
+
+if ETHERNET
+
+source "drivers/net/ethernet/3com/Kconfig"
+source "drivers/net/ethernet/8390/Kconfig"
+source "drivers/net/ethernet/amd/Kconfig"
+source "drivers/net/ethernet/broadcom/Kconfig"
+source "drivers/net/ethernet/chelsio/Kconfig"
+source "drivers/net/ethernet/intel/Kconfig"
+source "drivers/net/ethernet/i825xx/Kconfig"
+source "drivers/net/ethernet/qlogic/Kconfig"
+source "drivers/net/ethernet/smsc/Kconfig"
+
+endif # ETHERNET

drivers/net/ethernet/Makefile

+#
+# Makefile for the Linux network Ethernet device drivers.
+#
+
+obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
+obj-$(CONFIG_NET_VENDOR_8390) += 8390/
+obj-$(CONFIG_NET_VENDOR_AMD) += amd/
+obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
+obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
+obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
+obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
+obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/

drivers/net/ethernet/amd/Kconfig

+#
+# AMD network device configuration
+#
+
+config NET_VENDOR_AMD
+	bool "AMD devices"
+	depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
+		   SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
+		   (ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA
+	---help---
+	  If you have a network (Ethernet) chipset belonging to this class,
+	  say Y.
+
+	  Note that the answer to this question does not directly affect
+	  the kernel: saying N will just case the configurator to skip all
+	  the questions regarding AMD chipsets. If you say Y, you will be asked
+	  for your specific chipset/driver in the following questions.
+
+if NET_VENDOR_AMD
+
+config A2065
+	tristate "A2065 support"
+	depends on ZORRO
+	select CRC32
+	---help---
+	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
+	  say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called a2065.
+
+config AMD8111_ETH
+	tristate "AMD 8111 (new PCI LANCE) support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  If you have an AMD 8111-based PCI LANCE ethernet card,
+	  answer Y here and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called amd8111e.
+
+config LANCE
+	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
+	depends on ISA && ISA_DMA_API
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
+	  of this type.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called lance.  This is recommended.
+
+config PCNET32
+	tristate "AMD PCnet32 PCI support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
+	  answer Y here and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called pcnet32.
+
+config ARIADNE
+	tristate "Ariadne support"
+	depends on ZORRO
+	---help---
+	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
+	  Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ariadne.
+
+config ARM_AM79C961A
+	bool "ARM EBSA110 AM79C961A support"
+	depends on ARM && ARCH_EBSA110
+	select CRC32
+	---help---
+	  If you wish to compile a kernel for the EBSA-110, then you should
+	  always answer Y to this.
+
+config ATARILANCE
+	tristate "Atari LANCE support"
+	depends on ATARI
+	---help---
+	  Say Y to include support for several Atari Ethernet adapters based
+	  on the AMD LANCE chipset: RieblCard (with or without battery), or
+	  PAMCard VME (also the version by Rhotron, with different addresses).
+
+config DECLANCE
+	tristate "DEC LANCE ethernet controller support"
+	depends on MACH_DECSTATION
+	select CRC32
+	---help---
+	  This driver is for the series of Ethernet controllers produced by
+	  DEC (now Compaq) based on the AMD LANCE chipset, including the
+	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
+
+config DEPCA
+	tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
+	depends on (ISA || EISA || MCA)
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto> as well as
+	  <file:drivers/net/depca.c>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called depca.
+
+config HPLANCE
+	bool "HP on-board LANCE support"
+	depends on DIO
+	select CRC32
+	---help---
+	  If you want to use the builtin "LANCE" Ethernet controller on an
+	  HP300 machine, say Y here.
+
+config MIPS_AU1X00_ENET
+	tristate "MIPS AU1000 Ethernet support"
+	depends on MIPS_ALCHEMY
+	select PHYLIB
+	select CRC32
+	---help---
+	  If you have an Alchemy Semi AU1X00 based system
+	  say Y.  Otherwise, say N.
+
+config MVME147_NET
+	tristate "MVME147 (LANCE) Ethernet support"
+	depends on MVME147
+	select CRC32
+	---help---
+	  Support for the on-board Ethernet interface on the Motorola MVME147
+	  single-board computer.  Say Y here to include the
+	  driver for this chip in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config PCMCIA_NMCLAN
+	tristate "New Media PCMCIA support"
+	depends on PCMCIA
+	help
+	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
+	  PCMCIA (PC-card) Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called nmclan_cs.  If unsure, say N.
+
+config NI65
+	tristate "NI6510 support"
+	depends on ISA && ISA_DMA_API
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ni65.
+
+config SUN3LANCE
+	tristate "Sun3/Sun3x on-board LANCE support"
+	depends on (SUN3 || SUN3X)
+	---help---
+	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
+	  featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
+	  here to compile in the Linux driver for this and enable Ethernet.
+	  General Linux information on the Sun 3 and 3x series (now
+	  discontinued) is at
+	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+	  If you're not building a kernel for a Sun 3, say N.
+
+config SUNLANCE
+	tristate "Sun LANCE support"
+	depends on SBUS
+	select CRC32
+	---help---
+	  This driver supports the "le" interface present on all 32-bit Sparc
+	  systems, on some older Ultra systems and as an Sbus option.  These
+	  cards are based on the AMD LANCE chipset, which is better known
+	  via the NE2100 cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunlance.
+
+endif # NET_VENDOR_AMD

drivers/net/ethernet/amd/Makefile

+#
+# Makefile for the AMD network device drivers.
+#
+
+obj-$(CONFIG_A2065) += a2065.o
+obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
+obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
+obj-$(CONFIG_ARIADNE) += ariadne.o
+obj-$(CONFIG_ATARILANCE) += atarilance.o
+obj-$(CONFIG_DECLANCE) += declance.o
+obj-$(CONFIG_DEPCA) += depca.o
+obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
+obj-$(CONFIG_LANCE) += lance.o
+obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
+obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
+obj-$(CONFIG_PCMCIA_NMCLAN) += nmclan_cs.o
+obj-$(CONFIG_NI65) += ni65.o
+obj-$(CONFIG_PCNET32) += pcnet32.o
+obj-$(CONFIG_SUN3LANCE) += sun3lance.o
+obj-$(CONFIG_SUNLANCE) += sunlance.o

drivers/net/ethernet/broadcom/Kconfig

+#
+# Broadcom device configuration
+#
+
+config NET_VENDOR_BROADCOM
+	bool "Broadcom devices"
+	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
+		   SIBYTE_SB1xxx_SOC
+	---help---
+	  If you have a network (Ethernet) chipset belonging to this class,
+	  say Y.
+
+	  Note that the answer to this question does not directly affect
+	  the kernel: saying N will just case the configurator to skip all
+	  the questions regarding AMD chipsets. If you say Y, you will be asked
+	  for your specific chipset/driver in the following questions.
+
+if NET_VENDOR_BROADCOM
+
+config B44
+	tristate "Broadcom 440x/47xx ethernet support"
+	depends on SSB_POSSIBLE && HAS_DMA
+	select SSB
+	select MII
+	---help---
+	  If you have a network (Ethernet) controller of this type, say Y
+	  or M and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called b44.
+
+# Auto-select SSB PCI-HOST support, if possible
+config B44_PCI_AUTOSELECT
+	bool
+	depends on B44 && SSB_PCIHOST_POSSIBLE
+	select SSB_PCIHOST
+	default y
+
+# Auto-select SSB PCICORE driver, if possible
+config B44_PCICORE_AUTOSELECT
+	bool
+	depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
+	select SSB_DRIVER_PCICORE
+	default y
+
+config B44_PCI
+	bool
+	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
+	default y
+
+config BCM63XX_ENET
+	tristate "Broadcom 63xx internal mac support"
+	depends on BCM63XX
+	select MII
+	select PHYLIB
+	help
+	  This driver supports the ethernet MACs in the Broadcom 63xx
+	  MIPS chipset family (BCM63XX).
+
+config BNX2
+	tristate "Broadcom NetXtremeII support"
+	depends on PCI
+	select CRC32
+	select FW_LOADER
+	---help---
+	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bnx2.  This is recommended.
+
+config CNIC
+	tristate "Broadcom CNIC support"
+	depends on PCI
+	select BNX2
+	select UIO
+	---help---
+	  This driver supports offload features of Broadcom NetXtremeII
+	  gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cnic.  This is recommended.
+
+config SB1250_MAC
+	tristate "SB1250 Gigabit Ethernet support"
+	depends on SIBYTE_SB1xxx_SOC
+	select PHYLIB
+	---help---
+	  This driver supports Gigabit Ethernet interfaces based on the
+	  Broadcom SiByte family of System-On-a-Chip parts.  They include
+	  the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
+	  and BCM1480 chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sb1250-mac.
+
+config TIGON3
+	tristate "Broadcom Tigon3 support"
+	depends on PCI
+	select PHYLIB
+	---help---
+	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tg3.  This is recommended.
+
+config BNX2X
+	tristate "Broadcom NetXtremeII 10Gb support"
+	depends on PCI
+	select FW_LOADER
+	select ZLIB_INFLATE
+	select LIBCRC32C
+	select MDIO
+	---help---
+	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
+	  To compile this driver as a module, choose M here: the module
+	  will be called bnx2x.  This is recommended.
+
+endif # NET_VENDOR_BROADCOM

drivers/net/ethernet/broadcom/Makefile

+#
+# Makefile for the Broadcom network device drivers.
+#
+
+obj-$(CONFIG_B44) += b44.o
+obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
+obj-$(CONFIG_BNX2) += bnx2.o
+obj-$(CONFIG_CNIC) += cnic.o
+obj-$(CONFIG_BNX2X) += bnx2x/
+obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
+obj-$(CONFIG_TIGON3) += tg3.o