ARM: at91: dt: enable usb ehci for sam9g45 and sam9x5

make the ECHI depends on ARCH_AT91
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: devicetree-discuss@lists.ozlabs.org

arch/arm/boot/dts/at91sam9g25ek.dts

@@ -41,5 +41,9 @@ usb0: ohci@00600000 {
 					   &pioD 20 0
 					  >;
 		};
+
+		usb1: ehci@00700000 {
+			status = "okay";
+		};
 	};
 };

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -224,6 +224,13 @@ usb0: ohci@00700000 {
 			interrupts = <22 4>;
 			status = "disabled";
 		};
+
+		usb1: ehci@00800000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00800000 0x100000>;
+			interrupts = <22 4>;
+			status = "disabled";
+		};
 	};
 
 	i2c@0 {

arch/arm/boot/dts/at91sam9m10g45ek.dts

@@ -76,6 +76,10 @@ usb0: ohci@00700000 {
 			atmel,vbus-gpio = <&pioD 1 0
 					   &pioD 3 0>;
 		};
+
+		usb1: ehci@00800000 {
+			status = "okay";
+		};
 	};
 
 	leds {

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -214,6 +214,13 @@ usb0: ohci@00600000 {
 			interrupts = <22 4>;
 			status = "disabled";
 		};
+
+		usb1: ehci@00700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 4>;
+			status = "disabled";
+		};
 	};
 
 	i2c@0 {

arch/arm/mach-at91/at91sam9g45.c

@@ -233,6 +233,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
 	CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),

arch/arm/mach-at91/at91sam9x5.c

@@ -232,6 +232,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
 	CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
 	CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
 };
 
 /*

drivers/usb/Kconfig

@@ -65,7 +65,7 @@ config USB_ARCH_HAS_EHCI
 	default y if PPC_MPC512x
 	default y if ARCH_IXP4XX
 	default y if ARCH_W90X900
-	default y if ARCH_AT91SAM9G45
+	default y if ARCH_AT91
 	default y if ARCH_MXC
 	default y if ARCH_OMAP3
 	default y if ARCH_CNS3XXX