Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Olof Johansson:
 "This is the first release where we split up the 64-bit contributions a
  bit more, and in particular we are having a separate DT branch for
  them.

  Contents:

   - New devices added to Broadcom NorthStar2
   - Misc fixes for Exynos7 boards
   - QCOM updates for MSM8916
   - Rockchip tweaks for rk3368 SoC and eval board
   - A series of fixes for APM X-Gene v1 and v2
   - Renesas R8A7795 CPU/PSCI additions
   - Marvell Berlin4CT PSCI, cpuidle, watchdog portions
   - Freescale LS1043a SoC and dev board support

  + some treewide or other misc changes"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
  dts/ls2080a: Update DTSI to add support of SP805 WDT
  Documentation: DT: Add entry for ARM SP805-WDT
  arm64: dts: X-Gene v2: I2C1 clock is always on
  arm64: dts: X-Gene v1: I2C0 clock is always on
  arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms
  arm64: dts: hikey: add label properties to UARTs
  arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI
  arm64: dts: apq8016-sbc: enable UART0 on LS connector
  arm64: dts: juno: Add idle-states to device tree
  arm64: dts: Added syscon-reboot node for FSL's LS2080A SoC
  arm64: dts: add LS1043a-RDB board support
  arm64: dts: add Freescale LS1043a SoC support
  Documentation: DT: Add entry for Freescale LS1043a-RDB board
  arm64: dts: uniphier: add PH1-LD10 SoC/board support
  arm64: renesas: r8a7795: fix SATA clock assignment
  arm64: dts: salvator-x: Enable SATA controller
  arm64: dts: r8a7795: Add SATA controller node
  arm64: renesas: r8a7795: add internal delay for i2c IPs
  arm64: renesas: salvator-x: Add board part number to DT bindings
  arm64: dts: r8a7795: Add pmu device nodes
  ...

Documentation/devicetree/bindings/arm/fsl.txt

@@ -131,6 +131,10 @@ Example:
 Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
 ----------------------------------------------------------------
 
+LS1043A ARMv8 based RDB Board
+Required root node properties:
+    - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
+
 LS2080A ARMv8 based Simulator model
 Required root node properties:
     - compatible = "fsl,ls2080a-simu", "fsl,ls2080a";

Documentation/devicetree/bindings/arm/rockchip.txt

@@ -87,6 +87,10 @@ Rockchip platforms device tree bindings
 		     "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
 		     "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
 
+- Rockchip RK3368 evb:
+    Required root node properties:
+      - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";
+
 - Rockchip R88 board:
     Required root node properties:
       - compatible = "rockchip,r88", "rockchip,rk3368";

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -27,6 +27,8 @@ SoCs:
     compatible = "renesas,r8a7793"
   - R-Car E2 (R8A77940)
     compatible = "renesas,r8a7794"
+  - R-Car H3 (R8A77950)
+    compatible = "renesas,r8a7795"
 
 
 Boards:
@@ -57,5 +59,7 @@ Boards:
     compatible = "renesas,marzen", "renesas,r8a7779"
   - Porter (M2-LCDP)
     compatible = "renesas,porter", "renesas,r8a7791"
+  - Salvator-X (RTP0RC7795SIPB0010S)
+    compatible = "renesas,salvator-x", "renesas,r8a7795";
   - SILK (RTP0RC7794LCB00011S)
     compatible = "renesas,silk", "renesas,r8a7794"

Documentation/devicetree/bindings/watchdog/sp805-wdt.txt

+* ARM SP805 Watchdog Timer (WDT) Controller
+
+SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that
+can be used to identify the peripheral type, vendor, and revision.
+This value can be used for driver matching.
+
+As SP805 WDT is a primecell IP, it follows the base bindings specified in
+'arm/primecell.txt'
+
+Required properties:
+- compatible : Should be "arm,sp805-wdt", "arm,primecell"
+- reg : Base address and size of the watchdog timer registers.
+- clocks : From common clock binding.
+           First clock is PCLK and the second is WDOGCLK.
+           WDOGCLK can be equal to or be a sub-multiple of the PCLK frequency.
+- clock-names : From common clock binding.
+                Shall be "apb_pclk" for first clock and "wdog_clk" for the
+                second one.
+
+Optional properties:
+- interrupts : Should specify WDT interrupt number.
+
+Examples:
+
+		cluster1_core0_watchdog: wdt@c000000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc000000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+

MAINTAINERS

@@ -1435,6 +1435,15 @@ M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/RENESAS ARM64 ARCHITECTURE
+M:	Simon Horman <horms@verge.net.au>
+M:	Magnus Damm <magnus.damm@gmail.com>
+L:	linux-sh@vger.kernel.org
+Q:	http://patchwork.kernel.org/project/linux-sh/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
+S:	Supported
+F:	arch/arm64/boot/dts/renesas/
+
 ARM/RISCPC ARCHITECTURE
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1663,6 +1672,7 @@ F:	arch/arm/boot/dts/uniphier*
 F:	arch/arm/include/asm/hardware/cache-uniphier.h
 F:	arch/arm/mach-uniphier/
 F:	arch/arm/mm/cache-uniphier.c
+F:	arch/arm64/boot/dts/socionext/
 F:	drivers/i2c/busses/i2c-uniphier*
 F:	drivers/pinctrl/uniphier/
 F:	drivers/tty/serial/8250/8250_uniphier.c

arch/arm64/Kconfig.platforms

@@ -67,6 +67,23 @@ config ARCH_SEATTLE
 	help
 	  This enables support for AMD Seattle SOC Family
 
+config ARCH_SHMOBILE
+	bool
+
+config ARCH_RENESAS
+	bool "Renesas SoC Platforms"
+	select ARCH_SHMOBILE
+	select PINCTRL
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the ARMv8 based Renesas SoCs.
+
+config ARCH_R8A7795
+	bool "Renesas R-Car H3 SoC Platform"
+	depends on ARCH_RENESAS
+	help
+	  This enables support for the Renesas R-Car H3 SoC.
+
 config ARCH_STRATIX10
 	bool "Altera's Stratix 10 SoCFPGA Family"
 	help

arch/arm64/boot/dts/Makefile

@@ -10,7 +10,9 @@ dts-dirs += hisilicon
 dts-dirs += marvell
 dts-dirs += mediatek
 dts-dirs += qcom
+dts-dirs += renesas
 dts-dirs += rockchip
+dts-dirs += socionext
 dts-dirs += sprd
 dts-dirs += xilinx
 

arch/arm64/boot/dts/apm/apm-merlin.dts

@@ -70,3 +70,15 @@ &sgenet0 {
 &xgenet1 {
 	status = "ok";
 };
+
+&mmc0 {
+	status = "ok";
+};
+
+&i2c4 {
+	rtc68: rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+		status = "ok";
+	};
+};

arch/arm64/boot/dts/apm/apm-mustang.dts

@@ -74,3 +74,7 @@ &sgenet1 {
 &xgenet {
 	status = "ok";
 };
+
+&mmc0 {
+	status = "ok";
+};

arch/arm64/boot/dts/apm/apm-storm.dtsi

@@ -25,6 +25,7 @@ cpu@000 {
 			reg = <0x0 0x000>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
 		};
 		cpu@001 {
 			device_type = "cpu";
@@ -32,6 +33,7 @@ cpu@001 {
 			reg = <0x0 0x001>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
 		};
 		cpu@100 {
 			device_type = "cpu";
@@ -39,6 +41,7 @@ cpu@100 {
 			reg = <0x0 0x100>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
 		};
 		cpu@101 {
 			device_type = "cpu";
@@ -46,6 +49,7 @@ cpu@101 {
 			reg = <0x0 0x101>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
 		};
 		cpu@200 {
 			device_type = "cpu";
@@ -53,6 +57,7 @@ cpu@200 {
 			reg = <0x0 0x200>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
 		};
 		cpu@201 {
 			device_type = "cpu";
@@ -60,6 +65,7 @@ cpu@201 {
 			reg = <0x0 0x201>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
 		};
 		cpu@300 {
 			device_type = "cpu";
@@ -67,6 +73,7 @@ cpu@300 {
 			reg = <0x0 0x300>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
 		};
 		cpu@301 {
 			device_type = "cpu";
@@ -74,6 +81,19 @@ cpu@301 {
 			reg = <0x0 0x301>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
+		};
+		xgene_L2_0: l2-cache-0 {
+			compatible = "cache";
+		};
+		xgene_L2_1: l2-cache-1 {
+			compatible = "cache";
+		};
+		xgene_L2_2: l2-cache-2 {
+			compatible = "cache";
+		};
+		xgene_L2_3: l2-cache-3 {
+			compatible = "cache";
 		};
 	};
 
@@ -150,6 +170,35 @@ socplldiv2: socplldiv2  {
 				clock-output-names = "socplldiv2";
 			};
 
+			ahbclk: ahbclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "div-reg";
+				divider-offset = <0x164>;
+				divider-width = <0x5>;
+				divider-shift = <0x0>;
+				clock-output-names = "ahbclk";
+			};
+
+			sdioclk: sdioclk@1f2ac000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2ac000 0x0 0x1000
+					0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg", "div-reg";
+				csr-offset = <0x0>;
+				csr-mask = <0x2>;
+				enable-offset = <0x8>;
+				enable-mask = <0x2>;
+				divider-offset = <0x178>;
+				divider-width = <0x8>;
+				divider-shift = <0x0>;
+				clock-output-names = "sdioclk";
+			};
+
 			qmlclk: qmlclk {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
@@ -686,6 +735,50 @@ serial3: serial@1c023000 {
 			interrupts = <0x0 0x4f 0x4>;
 		};
 
+		mmc0: mmc@1c000000 {
+			compatible = "arasan,sdhci-4.9a";
+			reg = <0x0 0x1c000000 0x0 0x100>;
+			interrupts = <0x0 0x49 0x4>;
+			dma-coherent;
+			no-1-8-v;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&sdioclk 0>, <&ahbclk 0>;
+		};
+
+		gfcgpio: gpio0@1701c000 {
+			compatible = "apm,xgene-gpio";
+			reg = <0x0 0x1701c000 0x0 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dwgpio: gpio@1c024000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x1c024000 0x0 0x1000>;
+			reg-io-width = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+			};
+		};
+
+		i2c0: i2c@10512000 {
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10512000 0x0 0x1000>;
+			interrupts = <0 0x44 0x4>;
+			#clock-cells = <1>;
+			clocks = <&ahbclk 0>;
+			bus_num = <0>;
+		};
+
 		phy1: phy@1f21a000 {
 			compatible = "apm,xgene-phy";
 			reg = <0x0 0x1f21a000 0x0 0x100>;
@@ -760,7 +853,26 @@ sata3: sata@1a800000 {
 			phy-names = "sata-phy";
 		};
 
-		sbgpio: sbgpio@17001000{
+		/* Do not change dwusb name, coded for backward compatibility */
+		usb0: dwusb@19000000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg =  <0x0 0x19000000 0x0 0x100000>;
+			interrupts = <0x0 0x89 0x4>;
+			dma-coherent;
+			dr_mode = "host";
+		};
+
+		usb1: dwusb@19800000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg =  <0x0 0x19800000 0x0 0x100000>;
+			interrupts = <0x0 0x8a 0x4>;
+			dma-coherent;
+			dr_mode = "host";
+		};
+
+		sbgpio: gpio@17001000{
 			compatible = "apm,xgene-gpio-sb";
 			reg = <0x0 0x17001000 0x0 0x400>;
 			#gpio-cells = <2>;

arch/arm64/boot/dts/arm/juno-r1.dts

@@ -60,6 +60,28 @@ core3 {
 			};
 		};
 
+		idle-states {
+			entry-method = "arm,psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2500>;
+			};
+		};
+
 		A57_0: cpu@0 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x0 0x0>;
@@ -67,6 +89,7 @@ A57_0: cpu@0 {
 			enable-method = "psci";
 			next-level-cache = <&A57_L2>;
 			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A57_1: cpu@1 {
@@ -76,6 +99,7 @@ A57_1: cpu@1 {
 			enable-method = "psci";
 			next-level-cache = <&A57_L2>;
 			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_0: cpu@100 {
@@ -85,6 +109,7 @@ A53_0: cpu@100 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_1: cpu@101 {
@@ -94,6 +119,7 @@ A53_1: cpu@101 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_2: cpu@102 {
@@ -103,6 +129,7 @@ A53_2: cpu@102 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_3: cpu@103 {
@@ -112,6 +139,7 @@ A53_3: cpu@103 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A57_L2: l2-cache0 {

arch/arm64/boot/dts/arm/juno.dts

@@ -60,6 +60,28 @@ core3 {
 			};
 		};
 
+		idle-states {
+			entry-method = "arm,psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2500>;
+			};
+		};
+
 		A57_0: cpu@0 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x0 0x0>;
@@ -67,6 +89,7 @@ A57_0: cpu@0 {
 			enable-method = "psci";
 			next-level-cache = <&A57_L2>;
 			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A57_1: cpu@1 {
@@ -76,6 +99,7 @@ A57_1: cpu@1 {
 			enable-method = "psci";
 			next-level-cache = <&A57_L2>;
 			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_0: cpu@100 {
@@ -85,6 +109,7 @@ A53_0: cpu@100 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_1: cpu@101 {
@@ -94,6 +119,7 @@ A53_1: cpu@101 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_2: cpu@102 {
@@ -103,6 +129,7 @@ A53_2: cpu@102 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_3: cpu@103 {
@@ -112,6 +139,7 @@ A53_3: cpu@103 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A57_L2: l2-cache0 {

arch/arm64/boot/dts/broadcom/ns2-svk.dts

@@ -50,10 +50,28 @@ memory {
 		device_type = "memory";
 		reg = <0x000000000 0x80000000 0x00000000 0x40000000>;
 	};
+};
 
-	soc: soc {
-		uart3: serial@66130000 {
+&i2c0 {
 	status = "ok";
-		};
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&uart3 {
+	status = "ok";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 	};
 };

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -31,6 +31,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/bcm-ns2.h>
 
 /memreserve/ 0x84b00000 0x00000008;
 
@@ -44,36 +45,44 @@ cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		A57_0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0x84b00000>;
+			next-level-cache = <&CLUSTER0_L2>;
 		};
 
-		cpu@1 {
+		A57_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0x84b00000>;
+			next-level-cache = <&CLUSTER0_L2>;
 		};
 
-		cpu@2 {
+		A57_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0x84b00000>;
+			next-level-cache = <&CLUSTER0_L2>;
 		};
 
-		cpu@3 {
+		A57_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0x84b00000>;
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		CLUSTER0_L2: l2-cache@000 {
+			compatible = "cache";
 		};
 	};
 
@@ -89,12 +98,154 @@ IRQ_TYPE_EDGE_RISING)>,
 			      IRQ_TYPE_EDGE_RISING)>;
 	};
 
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A57_0>,
+				     <&A57_1>,
+				     <&A57_2>,
+				     <&A57_3>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		smmu: mmu@64000000 {
+			compatible = "arm,mmu-500";
+			reg = <0x64000000 0x40000>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			mmu-masters;
+		};
+
+		lcpll_ddr: lcpll_ddr@6501d058 {
+			#clock-cells = <1>;
+			compatible = "brcm,ns2-lcpll-ddr";
+			reg = <0x6501d058 0x20>,
+			      <0x6501c020 0x4>,
+			      <0x6501d04c 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll_ddr", "pcie_sata_usb",
+					     "ddr", "ddr_ch2_unused",
+					     "ddr_ch3_unused", "ddr_ch4_unused",
+					     "ddr_ch5_unused";
+		};
+
+		lcpll_ports: lcpll_ports@6501d078 {
+			#clock-cells = <1>;
+			compatible = "brcm,ns2-lcpll-ports";
+			reg = <0x6501d078 0x20>,
+			      <0x6501c020 0x4>,
+			      <0x6501d054 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll_ports", "wan", "rgmii",
+					     "ports_ch2_unused",
+					     "ports_ch3_unused",
+					     "ports_ch4_unused",
+					     "ports_ch5_unused";
+		};
+
+		genpll_scr: genpll_scr@6501d098 {
+			#clock-cells = <1>;
+			compatible = "brcm,ns2-genpll-scr";
+			reg = <0x6501d098 0x32>,
+			      <0x6501c020 0x4>,
+			      <0x6501d044 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll_scr", "scr", "fs",
+					     "audio_ref", "scr_ch3_unused",
+					     "scr_ch4_unused", "scr_ch5_unused";
+		};
+
+		genpll_sw: genpll_sw@6501d0c4 {
+			#clock-cells = <1>;
+			compatible = "brcm,ns2-genpll-sw";
+			reg = <0x6501d0c4 0x32>,
+			      <0x6501c020 0x4>,
+			      <0x6501d044 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll_sw", "rpe", "250", "nic",
+					     "chimp", "port", "sdio";
+		};
+
+		crmu: crmu@65024000 {
+			compatible = "syscon";
+			reg = <0x65024000 0x100>;
+		};
+
+		reboot@65024000 {
+			compatible ="syscon-reboot";
+			regmap = <&crmu>;
+			offset = <0x90>;
+			mask = <0xfffffffd>;
+		};
+
 		gic: interrupt-controller@65210000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -105,14 +256,53 @@ gic: interrupt-controller@65210000 {
 			      <0x65260000 0x1000>;
 		};
 
+		i2c0: i2c@66080000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x66080000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@660b0000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x660b0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
 		uart3: serial@66130000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x66130000 0x100>;
 			interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clock-frequency = <23961600>;
+			clocks = <&osc>;
 			status = "disabled";
 		};
+
+		hwrng: hwrng@66220000 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x66220000 0x28>;
+		};
+
+		nand: nand@66460000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x66460000 0x600>,
+			      <0x67015408 0x600>,
+			      <0x66460f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
 	};
 };

arch/arm64/boot/dts/exynos/exynos7-espresso.dts

@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos7.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@@ -52,11 +53,288 @@ &adc {
 	status = "okay";
 };
 
+&hsi2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <200000>;
+	status = "okay";
+
+	s2mps15_pmic@66 {
+		compatible = "samsung,s2mps15-pmic";
+		reg = <0x66>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpa0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+		wakeup-source;
+
+		s2mps15_osc: clocks {
+			compatible = "samsung,s2mps13-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps13_ap", "s2mps13_cp",
+				"s2mps13_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vqmmc-sdcard";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1110000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <2250000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vdd_ldo13";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vdd_ldo14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "vmmc-sdcard";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "vdd_ldo18";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "vdd_ldo19";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "vdd_ldo21";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "vdd_ldo23";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1470000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_atlas";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_buck7";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_buck8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_buck9";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_buck10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+		};
+	};
+};
+
+&pinctrl_alive {
+	pmic_irq: pmic-irq {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+};
+
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
 	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
 	non-removable;
 	card-detect-delay = <200>;
 	clock-frequency = <800000000>;
@@ -80,5 +358,7 @@ &mmc_2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
 	bus-width = <4>;
+	vmmc-supply = <&ldo17_reg>;
+	vqmmc-supply = <&ldo2_reg>;
 	disable-wp;
 };

arch/arm64/boot/dts/exynos/exynos7.dtsi

@@ -454,6 +454,13 @@ pmu_system_controller: system-controller@105c0000 {
 			reg = <0x105c0000 0x5000>;
 		};
 
+		reboot: syscon-reboot {
+			compatible = "syscon-reboot";
+			regmap = <&pmu_system_controller>;
+			offset = <0x0400>;
+			mask = <0x1>;
+		};
+
 		rtc: rtc@10590000 {
 			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10590000 0x100>;

arch/arm64/boot/dts/freescale/Makefile

 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
  
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts

+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A RDB Board";
+};
+
+&i2c0 {
+	status = "okay";
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+	adt7461a@4c {
+		compatible = "adi,adt7461";
+		reg = <0x4c>;
+	};
+	eeprom@52 {
+		compatible = "at24,24c512";
+		reg = <0x52>;
+	};
+	eeprom@53 {
+		compatible = "at24,24c512";
+		reg = <0x53>;
+	};
+	rtc@68 {
+		compatible = "pericom,pt7c4338";
+		reg = <0x68>;
+	};
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+
+		nor@0,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			compatible = "fsl,ifc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1 0x0 0x10000>;
+		};
+
+		cpld: board-control@2,0 {
+			compatible = "fsl,ls1043ardb-cpld";
+			reg = <0x2 0x0 0x0000100>;
+		};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};

arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi

@@ -153,6 +153,18 @@ its: gic-its@6020000 {
 		};
 	};
 
+	rstcr: syscon@1e60000 {
+		compatible = "fsl,ls2080a-rstcr", "syscon";
+		reg = <0x0 0x1e60000 0x0 0x4>;
+	};
+
+	reboot {
+		compatible ="syscon-reboot";
+		regmap = <&rstcr>;
+		offset = <0x0>;
+		mask = <0x2>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
@@ -193,6 +205,62 @@ serial1: serial@21c0600 {
 			interrupts = <0 32 0x4>; /* Level high type */
 		};
 
+		cluster1_core0_watchdog: wdt@c000000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc000000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster1_core1_watchdog: wdt@c010000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc010000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster2_core0_watchdog: wdt@c100000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc100000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster2_core1_watchdog: wdt@c110000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc110000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster3_core0_watchdog: wdt@c200000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc200000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster3_core1_watchdog: wdt@c210000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc210000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster4_core0_watchdog: wdt@c300000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc300000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster4_core1_watchdog: wdt@c310000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc310000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
 		fsl_mc: fsl-mc@80c000000 {
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */

arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts

@@ -32,3 +32,10 @@ memory@0 {
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 };
+
+&uart2 {
+	label = "LS-UART0";
+};
+&uart3 {
+	label = "LS-UART1";
+};

arch/arm64/boot/dts/marvell/berlin4ct.dtsi

@@ -55,7 +55,7 @@ aliases {
 	};
 
 	psci {
-		compatible = "arm,psci-0.2";
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
 		method = "smc";
 	};
 
@@ -68,6 +68,7 @@ cpu0: cpu@0 {
 			device_type = "cpu";
 			reg = <0x0>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
 		cpu1: cpu@1 {
@@ -75,6 +76,7 @@ cpu1: cpu@1 {
 			device_type = "cpu";
 			reg = <0x1>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
 		cpu2: cpu@2 {
@@ -82,6 +84,7 @@ cpu2: cpu@2 {
 			device_type = "cpu";
 			reg = <0x2>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
 		cpu3: cpu@3 {
@@ -89,6 +92,19 @@ cpu3: cpu@3 {
 			device_type = "cpu";
 			reg = <0x3>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <75>;
+				exit-latency-us = <155>;
+				min-residency-us = <1000>;
+			};
 		};
 	};
 
@@ -225,6 +241,16 @@ aic: interrupt-controller@3800 {
 			};
 		};
 
+		soc_pinctrl: pin-controller@ea8000 {
+			compatible = "marvell,berlin4ct-soc-pinctrl";
+			reg = <0xea8000 0x14>;
+		};
+
+		avio_pinctrl: pin-controller@ea8400 {
+			compatible = "marvell,berlin4ct-avio-pinctrl";
+			reg = <0xea8400 0x8>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -241,6 +267,29 @@ sic: interrupt-controller@1000 {
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
+			wdt0: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&osc>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@4000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x4000 0x100>;
+				clocks = <&osc>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			wdt2: watchdog@5000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x5000 0x100>;
+				clocks = <&osc>;
+				interrupts = <2>;
+				status = "disabled";
+			};
+
 			sm_gpio0: gpio@8000 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x8000 0x400>;
@@ -278,6 +327,18 @@ uart0: uart@d000 {
 				clocks = <&osc>;
 				reg-shift = <2>;
 				status = "disabled";
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+			};
+		};
+
+		system_pinctrl: pin-controller@fe2200 {
+			compatible = "marvell,berlin4ct-system-pinctrl";
+			reg = <0xfe2200 0xc>;
+
+			uart0_pmux: uart0-pmux {
+				groups = "SM_URT0_TXD", "SM_URT0_RXD";
+				function = "uart0";
 			};
 		};
 	};

arch/arm64/boot/dts/mediatek/mt8173-evb.dts

@@ -102,6 +102,13 @@ &mmc1 {
 };
 
 &pio {
+	disp_pwm0_pins: disp_pwm0_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>;
+			output-low;
+		};
+	};
+
 	mmc0_pins_default: mmc0default {
 		pins_cmd_dat {
 			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
@@ -200,6 +207,12 @@ pins_clk {
 	};
 };
 
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
 &pwrap {
 	pmic: mt6397 {
 		compatible = "mediatek,mt6397";

arch/arm64/boot/dts/mediatek/mt8173.dtsi

@@ -96,7 +96,7 @@ CPU_SLEEP_0: cpu-sleep-0 {
 	};
 
 	psci {
-		compatible = "arm,psci";
+		compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
 		method = "smc";
 		cpu_suspend   = <0x84000001>;
 		cpu_off	      = <0x84000002>;
@@ -248,6 +248,15 @@ watchdog: watchdog@10007000 {
 			reg = <0 0x10007000 0 0x100>;
 		};
 
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8173-timer",
+				     "mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_CLK_13M>,
+				 <&topckgen CLK_TOP_RTC_SEL>;
+		};
+
 		pwrap: pwrap@1000d000 {
 			compatible = "mediatek,mt8173-pwrap";
 			reg = <0 0x1000d000 0 0x1000>;
@@ -558,6 +567,28 @@ mmsys: clock-controller@14000000 {
 			#clock-cells = <1>;
 		};
 
+		pwm0: pwm@1401e000 {
+			compatible = "mediatek,mt8173-disp-pwm",
+				     "mediatek,mt6595-disp-pwm";
+			reg = <0 0x1401e000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&mmsys CLK_MM_DISP_PWM026M>,
+				 <&mmsys CLK_MM_DISP_PWM0MM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		pwm1: pwm@1401f000 {
+			compatible = "mediatek,mt8173-disp-pwm",
+				     "mediatek,mt6595-disp-pwm";
+			reg = <0 0x1401f000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&mmsys CLK_MM_DISP_PWM126M>,
+				 <&mmsys CLK_MM_DISP_PWM1MM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
 		imgsys: clock-controller@15000000 {
 			compatible = "mediatek,mt8173-imgsys", "syscon";
 			reg = <0 0x15000000 0 0x1000>;

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

@@ -20,6 +20,10 @@ / {
 	aliases {
 		serial0 = &blsp1_uart2;
 		serial1 = &blsp1_uart1;
+		usid0 = &pm8916_0;
+		i2c0	= &blsp_i2c2;
+		i2c1	= &blsp_i2c6;
+		i2c3	= &blsp_i2c4;
 	};
 
 	chosen {
@@ -27,7 +31,16 @@ chosen {
 	};
 
 	soc {
+		serial@78af000 {
+			label = "LS-UART0";
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+		};
+
 		serial@78b0000 {
+			label = "LS-UART1";
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp1_uart2_default>;
@@ -36,26 +49,31 @@ serial@78b0000 {
 
 		i2c@78b6000 {
 		/* On Low speed expansion */
+			label = "LS-I2C0";
 			status = "okay";
 		};
 
 		i2c@78b8000 {
 		/* On High speed expansion */
+			label = "HS-I2C2";
 			status = "okay";
 		};
 
 		i2c@78ba000 {
 		/* On Low speed expansion */
+			label = "LS-I2C1";
 			status = "okay";
 		};
 
 		spi@78b7000 {
 		/* On High speed expansion */
+			label = "HS-SPI1";
 			status = "okay";
 		};
 
 		spi@78b9000 {
 		/* On Low speed expansion */
+			label = "LS-SPI0";
 			status = "okay";
 		};
 

arch/arm64/boot/dts/qcom/msm8916-mtp.dts

@@ -17,6 +17,6 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
-	compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360",
+	compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1",
 			"qcom,msm8916", "qcom,mtp";
 };

arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi

@@ -17,6 +17,7 @@
 / {
 	aliases {
 		serial0 = &blsp1_uart2;
+		usid0 = &pm8916_0;
 	};
 
 	chosen {

arch/arm64/boot/dts/qcom/msm8916-pins.dtsi

@@ -16,10 +16,13 @@ &msmgpio {
 	blsp1_uart1_default: blsp1_uart1_default {
 		pinmux {
 			function = "blsp_uart1";
-			pins = "gpio0", "gpio1";
+			//	TX, RX, CTS_N, RTS_N
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
 		};
 		pinconf {
-			pins = "gpio0", "gpio1";
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
 			drive-strength = <16>;
 			bias-disable;
 		};
@@ -28,10 +31,12 @@ pinconf {
 	blsp1_uart1_sleep: blsp1_uart1_sleep {
 		pinmux {
 			function = "gpio";
-			pins = "gpio0", "gpio1";
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
 		};
 		pinconf {
-			pins = "gpio0", "gpio1";
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
 			drive-strength = <2>;
 			bias-pull-down;
 		};
@@ -272,7 +277,7 @@ pinmux {
 		};
 		pinconf {
 			pins = "gpio6", "gpio7";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable = <0>;
 		};
 	};
@@ -296,7 +301,7 @@ pinmux {
 		};
 		pinconf {
 			pins = "gpio14", "gpio15";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable = <0>;
 		};
 	};
@@ -320,7 +325,7 @@ pinmux {
 		};
 		pinconf {
 			pins = "gpio22", "gpio23";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable = <0>;
 		};
 	};

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -37,6 +37,22 @@ memory {
 		reg = <0 0 0 0>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		reserve_aligned@86000000 {
+			reg = <0x0 0x86000000 0x0 0x0300000>;
+			no-map;
+		};
+
+		smem_mem: smem_region@86300000 {
+			reg = <0x0 0x86300000 0x0 0x0100000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -74,6 +90,29 @@ timer {
 			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_mem>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -103,21 +142,46 @@ gcc: qcom,gcc@1800000 {
 			reg = <0x1800000 0x80000>;
 		};
 
+		tcsr_mutex_regs: syscon@1905000 {
+			compatible = "syscon";
+			reg = <0x1905000 0x20000>;
+		};
+
+		tcsr_mutex: hwlock {
+			compatible = "qcom,tcsr-mutex";
+			syscon = <&tcsr_mutex_regs 0 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		rpm_msg_ram: memory@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x60000 0x8000>;
+		};
+
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78af000 0x200>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
+		apcs: syscon@b011000 {
+			compatible = "syscon";
+			reg = <0x0b011000 0x1000>;
+		};
+
 		blsp1_uart2: serial@78b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78b0000 0x200>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -438,6 +502,49 @@ rng@22000 {
 			clock-names = "core";
 		};
 	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-msm8916";
+				qcom,smd-channels = "rpm_requests";
+
+				pm8916-regulators {
+					compatible = "qcom,rpm-pm8916-regulators";
+
+					pm8916_s1: s1 {};
+					pm8916_s2: s2 {};
+					pm8916_s3: s3 {};
+					pm8916_s4: s4 {};
+
+					pm8916_l1: l1 {};
+					pm8916_l2: l2 {};
+					pm8916_l3: l3 {};
+					pm8916_l4: l4 {};
+					pm8916_l5: l5 {};
+					pm8916_l6: l6 {};
+					pm8916_l7: l7 {};
+					pm8916_l8: l8 {};
+					pm8916_l9: l9 {};
+					pm8916_l10: l10 {};
+					pm8916_l11: l11 {};
+					pm8916_l12: l12 {};
+					pm8916_l13: l13 {};
+					pm8916_l14: l14 {};
+					pm8916_l15: l15 {};
+					pm8916_l16: l16 {};
+					pm8916_l17: l17 {};
+					pm8916_l18: l18 {};
+				};
+			};
+		};
+	};
 };
 
 #include "msm8916-pins.dtsi"

arch/arm64/boot/dts/qcom/pm8916.dtsi

@@ -4,8 +4,8 @@
 
 &spmi_bus {
 
-	usid0: pm8916@0 {
-		compatible = "qcom,spmi-pmic";
+	pm8916_0: pm8916@0 {
+		compatible = "qcom,pm8916", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -90,7 +90,7 @@ ref_vdd {
 		};
 	};
 
-	usid1: pm8916@1 {
+	pm8916_1: pm8916@1 {
 		compatible = "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;

arch/arm64/boot/dts/renesas/Makefile

+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb
+
+always		:= $(dtb-y)
+clean-files	:= *.dtb

arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts

+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ * SSI-AK4613
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7795.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board based on r8a7795";
+	compatible = "renesas,salvator-x", "renesas,r8a7795";
+
+	aliases {
+		serial0 = &scif2;
+		serial1 = &scif1;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	x12_clk: x12_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	audio_clkout: audio_clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4613: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4613>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&pfc {
+	scif1_pins: scif1 {
+		renesas,groups = "scif1_data_a", "scif1_ctrl";
+		renesas,function = "scif1";
+	};
+	scif2_pins: scif2 {
+		renesas,groups = "scif2_data_a";
+		renesas,function = "scif2";
+	};
+
+	i2c2_pins: i2c2 {
+		renesas,groups = "i2c2_a";
+		renesas,function = "i2c2";
+	};
+
+	avb_pins: avb {
+		renesas,groups = "avb_mdc";
+		renesas,function = "avb";
+	};
+
+	sound_pins: sound {
+		renesas,groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		renesas,function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		renesas,groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+				 "audio_clkout_a", "audio_clkout3_a";
+		renesas,function = "audio_clk";
+	};
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk_multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+			capture  = <&ssi1 &src1 &dvc1>;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <900>;
+		rxdv-skew-ps = <0>;
+		rxd0-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd3-skew-ps = <0>;
+		txc-skew-ps = <900>;
+		txen-skew-ps = <0>;
+		txd0-skew-ps = <0>;
+		txd1-skew-ps = <0>;
+		txd2-skew-ps = <0>;
+		txd3-skew-ps = <0>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};

arch/arm64/boot/dts/rockchip/Makefile

+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
 
 always		:= $(dtb-y)

arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts

+/*
+ * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3368-evb.dtsi"
+
+/ {
+	model = "Rockchip RK3368 EVB with ACT8846 pmic";
+	compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "VCCA_CODEC";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_tp: REG8 {
+				regulator-name = "VCCA_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "VCCIO_PMU";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};

arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi

+/*
+ * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3368.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
+		pwm-delay-us = <10000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		button@0 {
+			gpio-key,wakeup = <1>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <116>;
+		};
+	};
+
+	/* supplies both host and otg */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	broken-cd;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rmii";
+	clock_in_out = "output";
+	snps,reset-gpio = <&gpio3 12 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <0 20 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc-clk {
+			rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc-cmd {
+			rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio {
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_rst: bt-rst {
+			rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};

arch/arm64/boot/dts/rockchip/rk3368-r88.dts

@@ -336,6 +336,12 @@ &saradc {
 	status = "okay";
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };

arch/arm64/boot/dts/rockchip/rk3368-thermal.dtsi

+/*
+ * Device Tree Source for RK3368 SoC thermal
+ *
+ * Copyright (c) 2015, Fuzhou Rockchip Electronics Co., Ltd
+ * Caesar Wang <wxt@rock-chips.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <100>; /* milliseconds */
+	polling-delay = <5000>; /* milliseconds */
+
+	thermal-sensors = <&tsadc 0>;
+
+	trips {
+		cpu_alert0: cpu_alert0 {
+			temperature = <75000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert1: cpu_alert1 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <95000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+				<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device =
+				<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+gpu_thermal: gpu_thermal {
+	polling-delay-passive = <100>; /* milliseconds */
+	polling-delay = <5000>; /* milliseconds */
+
+	thermal-sensors = <&tsadc 1>;
+
+	trips {
+		gpu_alert0: gpu_alert0 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_crit: gpu_crit {
+			temperature = <1150000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&gpu_alert0>;
+			cooling-device =
+				<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -45,6 +45,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,rk3368";
@@ -53,6 +54,7 @@ / {
 	#size-cells = <2>;
 
 	aliases {
+		ethernet0 = &gmac;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -123,6 +125,8 @@ cpu_l0: cpu@0 {
 			reg = <0x0 0x0>;
 			cpu-idle-states = <&cpu_sleep>;
 			enable-method = "psci";
+
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_l1: cpu@1 {
@@ -155,6 +159,8 @@ cpu_b0: cpu@100 {
 			reg = <0x0 0x100>;
 			cpu-idle-states = <&cpu_sleep>;
 			enable-method = "psci";
+
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_b1: cpu@101 {
@@ -404,6 +410,27 @@ uart4: serial@ff1c0000 {
 		status = "disabled";
 	};
 
+	thermal-zones {
+		#include "rk3368-thermal.dtsi"
+	};
+
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,rk3368-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		#thermal-sensor-cells = <1>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
 	gmac: ethernet@ff290000 {
 		compatible = "rockchip,rk3368-gmac";
 		reg = <0x0 0xff290000 0x0 0x10000>;
@@ -471,6 +498,48 @@ i2c2: i2c@ff660000 {
 		status = "disabled";
 	};
 
+	pwm0: pwm@ff680000 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680000 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff680010 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680010 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff680020 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680020 0x0 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM1>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff680030 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680030 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
 	uart2: serial@ff690000 {
 		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
 		reg = <0x0 0xff690000 0x0 0x100>;
@@ -510,6 +579,12 @@ wdt: watchdog@ff800000 {
 		status = "disabled";
 	};
 
+	timer@ff810000 {
+		compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer";
+		reg = <0x0 0xff810000 0x0 0x20>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	gic: interrupt-controller@ffb71000 {
 		compatible = "arm,gic-400";
 		interrupt-controller;
@@ -712,6 +787,24 @@ i2c5_xfer: i2c5-xfer {
 			};
 		};
 
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <3 8 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 8 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <3 29 RK_FUNC_3 &pcfg_pull_none>;
+			};
+		};
+
 		sdio0 {
 			sdio0_bus1: sdio0-bus1 {
 				rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>;
@@ -762,7 +855,7 @@ sdmmc_cmd: sdmmc-cmd {
 				rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
-			sdmmc_cd: sdmcc-cd {
+			sdmmc_cd: sdmmc-cd {
 				rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
@@ -829,6 +922,16 @@ spi2_tx: spi2-tx {
 			};
 		};
 
+		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		uart0 {
 			uart0_xfer: uart0-xfer {
 				rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>,

arch/arm64/boot/dts/socionext/Makefile

+dtb-$(CONFIG_ARCH_UNIPHIER) += uniphier-ph1-ld10-ref.dtb
+
+always		:= $(dtb-y)
+clean-files	:= *.dtb

arch/arm64/boot/dts/socionext/uniphier-ph1-ld10-ref.dts

+/*
+ * Device Tree Source for UniPhier PH1-LD10 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-ld10.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-LD10 Reference Board";
+	compatible = "socionext,ph1-ld10-ref", "socionext,ph1-ld10";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xc0000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&extbus {
+	ranges = <1 0x00000000 0x42000000 0x02000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x01f00000 0x00100000>;
+};
+
+&ethsc {
+	interrupts = <0 48 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};

arch/arm64/boot/dts/socionext/uniphier-ph1-ld10.dtsi

+/*
+ * Device Tree Source for UniPhier PH1-LD10 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	compatible = "socionext,ph1-ld10";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x80000100>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x80000100>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x80000100>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x80000100>;
+		};
+	};
+
+	clocks {
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <58820000>;
+		};
+
+		i2c_clk: i2c_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xf01>,
+			     <1 14 0xf01>,
+			     <1 11 0xf01>,
+			     <1 10 0xf01>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&uart_clk>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&uart_clk>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&uart_clk>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&uart_clk>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
+		pinctrl: pinctrl@5f801000 {
+			compatible = "socionext,ph1-ld10-pinctrl", "syscon";
+			reg = <0x5f801000 0xe00>;
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe80000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 4>;
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"

arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi

+../../../../arm/boot/dts/uniphier-pinctrl.dtsi
\ No newline at end of file

arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi

+../../../../arm/boot/dts/uniphier-support-card.dtsi
\ No newline at end of file

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

@@ -133,6 +133,8 @@ gpio: gpio@ff0a0000 {
 			clocks = <&misc_clk>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 16 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			reg = <0x0 0xff0a0000 0x1000>;
 		};