Commit 62c97eb5 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Greg Kroah-Hartman

ARM: samsung: fix assembly syntax for new gas

commit 2815774b upstream.

Recent assembler versions complain about extraneous
whitespace inside [] brackets. This fixes all of
these instances for the samsung platforms. We should
backport this to all kernels that might need to
be built with new binutils.

arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]'
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S: Assembler messages:
arch/arm/mach-s3c24xx/sleep-s3c2410.S:48: Error: ARM register expected -- `ldr r7,[ r4 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:49: Error: ARM register expected -- `ldr r8,[ r5 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:50: Error: ARM register expected -- `ldr r9,[ r6 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:64: Error: ARM register expected -- `streq r7,[ r4 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:65: Error: ARM register expected -- `streq r8,[ r5 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:66: Error: ARM register expected -- `streq r9,[ r6 ]'
arch/arm/kernel/debug.S: Assembler messages:
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/mach-s3c24xx/pm-h1940.S: Assembler messages:
arch/arm/mach-s3c24xx/pm-h1940.S:33: Error: ARM register expected -- `ldr pc,[ r0,#((0x0B8)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000)))]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S: Assembler messages:
arch/arm/mach-s3c24xx/sleep-s3c2412.S:60: Error: ARM register expected -- `ldrne r9,[ r1 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:61: Error: ARM register expected -- `strne r9,[ r1 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:62: Error: ARM register expected -- `ldrne r9,[ r2 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:63: Error: ARM register expected -- `strne r9,[ r2 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:64: Error: ARM register expected -- `ldrne r9,[ r3 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:65: Error: ARM register expected -- `strne r9,[ r3 ]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]'
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Acked-by: default avatarKukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 6c1e1e2c
......@@ -40,17 +40,17 @@
addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
and \rd, \rd, #0x00ff0000
teq \rd, #0x00440000 @ is it 2440?
1004:
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
ldr \rd, [\rx, # S3C2410_UFSTAT]
moveq \rd, \rd, lsr #SHIFT_2440TXF
tst \rd, #S3C2410_UFSTAT_TXFULL
.endm
.macro fifo_full_s3c2410 rd, rx
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
ldr \rd, [\rx, # S3C2410_UFSTAT]
tst \rd, #S3C2410_UFSTAT_TXFULL
.endm
......@@ -68,18 +68,18 @@
addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
and \rd, \rd, #0x00ff0000
teq \rd, #0x00440000 @ is it 2440?
10000:
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
ldr \rd, [\rx, # S3C2410_UFSTAT]
andne \rd, \rd, #S3C2410_UFSTAT_TXMASK
andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK
.endm
.macro fifo_level_s3c2410 rd, rx
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
ldr \rd, [\rx, # S3C2410_UFSTAT]
and \rd, \rd, #S3C2410_UFSTAT_TXMASK
.endm
......
......@@ -31,10 +31,10 @@
@@ try the interrupt offset register, since it is there
ldr \irqstat, [ \base, #INTPND ]
ldr \irqstat, [\base, #INTPND ]
teq \irqstat, #0
beq 1002f
ldr \irqnr, [ \base, #INTOFFSET ]
ldr \irqnr, [\base, #INTOFFSET ]
mov \tmp, #1
tst \irqstat, \tmp, lsl \irqnr
bne 1001f
......
......@@ -30,4 +30,4 @@
h1940_pm_return:
mov r0, #S3C2410_PA_GPIO
ldr pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ]
ldr pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]
......@@ -45,9 +45,9 @@ ENTRY(s3c2410_cpu_suspend)
ldr r4, =S3C2410_REFRESH
ldr r5, =S3C24XX_MISCCR
ldr r6, =S3C2410_CLKCON
ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
ldr r7, [r4] @ get REFRESH (and ensure in TLB)
ldr r8, [r5] @ get MISCCR (and ensure in TLB)
ldr r9, [r6] @ get CLKCON (and ensure in TLB)
orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
......@@ -61,8 +61,8 @@ ENTRY(s3c2410_cpu_suspend)
@@ align next bit of code to cache line
.align 5
s3c2410_do_sleep:
streq r7, [ r4 ] @ SDRAM sleep command
streq r8, [ r5 ] @ SDRAM power-down config
streq r9, [ r6 ] @ CPU sleep
streq r7, [r4] @ SDRAM sleep command
streq r8, [r5] @ SDRAM power-down config
streq r9, [r6] @ CPU sleep
1: beq 1b
mov pc, r14
......@@ -57,12 +57,12 @@ s3c2412_sleep_enter1:
* retry, as simply returning causes the system to lock.
*/
ldrne r9, [ r1 ]
strne r9, [ r1 ]
ldrne r9, [ r2 ]
strne r9, [ r2 ]
ldrne r9, [ r3 ]
strne r9, [ r3 ]
ldrne r9, [r1]
strne r9, [r1]
ldrne r9, [r2]
strne r9, [r2]
ldrne r9, [r3]
strne r9, [r3]
bne s3c2412_sleep_enter1
mov pc, r14
......@@ -14,12 +14,12 @@
/* The S5PV210/S5PC110 implementations are as belows. */
.macro fifo_level_s5pv210 rd, rx
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
ldr \rd, [\rx, # S3C2410_UFSTAT]
and \rd, \rd, #S5PV210_UFSTAT_TXMASK
.endm
.macro fifo_full_s5pv210 rd, rx
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
ldr \rd, [\rx, # S3C2410_UFSTAT]
tst \rd, #S5PV210_UFSTAT_TXFULL
.endm
......@@ -27,7 +27,7 @@
* most widely re-used */
.macro fifo_level_s3c2440 rd, rx
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
ldr \rd, [\rx, # S3C2410_UFSTAT]
and \rd, \rd, #S3C2440_UFSTAT_TXMASK
.endm
......@@ -36,7 +36,7 @@
#endif
.macro fifo_full_s3c2440 rd, rx
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
ldr \rd, [\rx, # S3C2410_UFSTAT]
tst \rd, #S3C2440_UFSTAT_TXFULL
.endm
......@@ -45,11 +45,11 @@
#endif
.macro senduart,rd,rx
strb \rd, [\rx, # S3C2410_UTXH ]
strb \rd, [\rx, # S3C2410_UTXH]
.endm
.macro busyuart, rd, rx
ldr \rd, [ \rx, # S3C2410_UFCON ]
ldr \rd, [\rx, # S3C2410_UFCON]
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
beq 1001f @
@ FIFO enabled...
......@@ -60,7 +60,7 @@
1001:
@ busy waiting for non fifo
ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
ldr \rd, [\rx, # S3C2410_UTRSTAT]
tst \rd, #S3C2410_UTRSTAT_TXFE
beq 1001b
......@@ -68,7 +68,7 @@
.endm
.macro waituart,rd,rx
ldr \rd, [ \rx, # S3C2410_UFCON ]
ldr \rd, [\rx, # S3C2410_UFCON]
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
beq 1001f @
@ FIFO enabled...
......@@ -79,7 +79,7 @@
b 1002f
1001:
@ idle waiting for non fifo
ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
ldr \rd, [\rx, # S3C2410_UTRSTAT]
tst \rd, #S3C2410_UTRSTAT_TXFE
beq 1001b
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment