Merge tag 'i2c-host-6.11-part-2' of...

Merge tag 'i2c-host-6.11-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

Added descriptions in the DTS for the Qualcomm SM8650 and SM8550
Camera Control Interface (CCI).

Added support for the "settle-time-us" property, which allows the
gpio-mux device to switch from one bus to another with a
configurable delay. The time can be set in the DTS.

The latest change also includes file sorting.

Fixed slot numbering in the SMBus framework to prevent failures
when more than 8 slots are occupied. It now enforces a a maximum
of 8 slots to be used. This ensures that the Intel PIIX4 device
can register the SPDs correctly without failure, even if other
slots are populated but not used.

Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml

@@ -57,6 +57,9 @@ properties:
       last value used.
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  settle-time-us:
+    description: Delay to wait before doing any transfer when a new bus gets selected.
+
 allOf:
   - $ref: i2c-mux.yaml
 

Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml

@@ -31,6 +31,8 @@ properties:
               - qcom,sm6350-cci
               - qcom,sm8250-cci
               - qcom,sm8450-cci
+              - qcom,sm8550-cci
+              - qcom,sm8650-cci
           - const: qcom,msm8996-cci # CCI v2
 
   "#address-cells":
@@ -195,6 +197,24 @@ allOf:
             - const: cpas_ahb
             - const: cci
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-cci
+              - qcom,sm8650-cci
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: cpas_ahb
+            - const: cci
+
 additionalProperties: false
 
 examples:

drivers/i2c/busses/Kconfig

@@ -196,6 +196,7 @@ config I2C_ISMT
 config I2C_PIIX4
 	tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
 	depends on PCI && HAS_IOPORT
+	select I2C_SMBUS
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following

drivers/i2c/busses/i2c-piix4.c

@@ -29,6 +29,7 @@
 #include <linux/stddef.h>
 #include <linux/ioport.h>
 #include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
 #include <linux/slab.h>
 #include <linux/dmi.h>
 #include <linux/acpi.h>
@@ -982,6 +983,14 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 		return retval;
 	}
 
+	/*
+	 * The AUX bus can not be probed as on some platforms it reports all
+	 * devices present and all reads return "0".
+	 * This would allow the ee1004 to be probed incorrectly.
+	 */
+	if (port == 0)
+		i2c_register_spd(adap);
+
 	*padap = adap;
 	return 0;
 }

drivers/i2c/i2c-smbus.c

@@ -352,18 +352,11 @@ void i2c_register_spd(struct i2c_adapter *adap)
 		return;
 
 	/*
-	 * If we're a child adapter on a muxed segment, then limit slots to 8,
-	 * as this is the max number of SPD EEPROMs that can be addressed per bus.
+	 * The max number of SPD EEPROMs that can be addressed per bus is 8.
+	 * If more slots are present either muxed or multiple busses are
+	 * necessary or the additional slots are ignored.
 	 */
-	if (i2c_parent_is_i2c_adapter(adap)) {
-		slot_count = 8;
-	} else {
-		if (slot_count > 8) {
-			dev_warn(&adap->dev,
-				 "More than 8 memory slots on a single bus, contact i801 maintainer to add missing mux config\n");
-			return;
-		}
-	}
+	slot_count = min(slot_count, 8);
 
 	/*
 	 * Memory types could be found at section 7.18.2 (Memory Device — Type), table 78

drivers/i2c/muxes/i2c-mux-gpio.c

@@ -5,16 +5,17 @@
  * Peter Korsgaard <peter.korsgaard@barco.com>
  */
 
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
+#include <linux/module.h>
 #include <linux/overflow.h>
 #include <linux/platform_data/i2c-mux-gpio.h>
 #include <linux/platform_device.h>
-#include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/bits.h>
-#include <linux/gpio/consumer.h>
-#include <linux/gpio/driver.h>
 
 struct gpiomux {
 	struct i2c_mux_gpio_platform_data data;
@@ -37,6 +38,9 @@ static int i2c_mux_gpio_select(struct i2c_mux_core *muxc, u32 chan)
 
 	i2c_mux_gpio_set(mux, chan);
 
+	if (mux->data.settle_time)
+		fsleep(mux->data.settle_time);
+
 	return 0;
 }
 
@@ -116,6 +120,8 @@ static int i2c_mux_gpio_probe_fw(struct gpiomux *mux,
 	if (device_property_read_u32(dev, "idle-state", &mux->data.idle))
 		mux->data.idle = I2C_MUX_GPIO_NO_IDLE;
 
+	device_property_read_u32(dev, "settle-time-us", &mux->data.settle_time);
+
 	return 0;
 }
 

include/linux/platform_data/i2c-mux-gpio.h

@@ -19,6 +19,7 @@
  *	position
  * @n_values: Number of multiplexer positions (busses to instantiate)
  * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used
+ * @settle_time: Delay to wait when a new bus is selected
  */
 struct i2c_mux_gpio_platform_data {
 	int parent;
@@ -26,6 +27,7 @@ struct i2c_mux_gpio_platform_data {
 	const unsigned *values;
 	int n_values;
 	unsigned idle;
+	u32 settle_time;
 };
 
 #endif /* _LINUX_I2C_MUX_GPIO_H */