Commit 6332c8d3 authored by Michał Mirosław's avatar Michał Mirosław Committed by David S. Miller

net: benet: convert to hw_features

Simple conversion.

This also fixes a bug in TX checksum toggling --- driver was changing
NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM+NETIF_F_IPV6_CSUM.
Signed-off-by: default avatarMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e92702b1
......@@ -307,7 +307,6 @@ struct be_adapter {
u16 work_counter;
/* Ethtool knobs and info */
bool rx_csum; /* BE card must perform rx-checksumming */
char fw_ver[FW_VER_LEN];
u32 if_handle; /* Used to configure filtering */
u32 pmac_id; /* MAC addr handle used by BE card */
......
......@@ -261,25 +261,6 @@ be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
return 0;
}
static u32 be_get_rx_csum(struct net_device *netdev)
{
struct be_adapter *adapter = netdev_priv(netdev);
return adapter->rx_csum;
}
static int be_set_rx_csum(struct net_device *netdev, uint32_t data)
{
struct be_adapter *adapter = netdev_priv(netdev);
if (data)
adapter->rx_csum = true;
else
adapter->rx_csum = false;
return 0;
}
static void
be_get_ethtool_stats(struct net_device *netdev,
struct ethtool_stats *stats, uint64_t *data)
......@@ -760,14 +741,6 @@ const struct ethtool_ops be_ethtool_ops = {
.get_ringparam = be_get_ringparam,
.get_pauseparam = be_get_pauseparam,
.set_pauseparam = be_set_pauseparam,
.get_rx_csum = be_get_rx_csum,
.set_rx_csum = be_set_rx_csum,
.get_tx_csum = ethtool_op_get_tx_csum,
.set_tx_csum = ethtool_op_set_tx_hw_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
.get_tso = ethtool_op_get_tso,
.set_tso = ethtool_op_set_tso,
.get_strings = be_get_stat_strings,
.set_phys_id = be_set_phys_id,
.get_sset_count = be_get_sset_count,
......
......@@ -988,9 +988,10 @@ static void be_rx_compl_process(struct be_adapter *adapter,
struct be_rx_obj *rxo,
struct be_rx_compl_info *rxcp)
{
struct net_device *netdev = adapter->netdev;
struct sk_buff *skb;
skb = netdev_alloc_skb_ip_align(adapter->netdev, BE_HDR_LEN);
skb = netdev_alloc_skb_ip_align(netdev, BE_HDR_LEN);
if (unlikely(!skb)) {
if (net_ratelimit())
dev_warn(&adapter->pdev->dev, "skb alloc failed\n");
......@@ -1000,13 +1001,13 @@ static void be_rx_compl_process(struct be_adapter *adapter,
skb_fill_rx_data(adapter, rxo, skb, rxcp);
if (likely(adapter->rx_csum && csum_passed(rxcp)))
if (likely((netdev->features & NETIF_F_RXCSUM) && csum_passed(rxcp)))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb_checksum_none_assert(skb);
skb->truesize = skb->len + sizeof(struct sk_buff);
skb->protocol = eth_type_trans(skb, adapter->netdev);
skb->protocol = eth_type_trans(skb, netdev);
if (adapter->netdev->features & NETIF_F_RXHASH)
skb->rxhash = rxcp->rss_hash;
......@@ -2627,10 +2628,12 @@ static void be_netdev_init(struct net_device *netdev)
struct be_rx_obj *rxo;
int i;
netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_GRO | NETIF_F_TSO6;
netdev->hw_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM;
netdev->features |= netdev->hw_features |
NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX |
NETIF_F_HW_VLAN_FILTER;
if (be_multi_rxq(adapter))
netdev->features |= NETIF_F_RXHASH;
......@@ -2643,8 +2646,6 @@ static void be_netdev_init(struct net_device *netdev)
netdev->flags |= IFF_MULTICAST;
adapter->rx_csum = true;
/* Default settings for Rx and Tx flow control */
adapter->rx_fc = true;
adapter->tx_fc = true;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment