net: dsa: sja1105: Convert to mdiobus_c45_read

Stop using the helpers to construct a special phy address which
indicates C45. Instead use the C45 accessors, which will call the
busses C45 specific read/write API.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

drivers/net/dsa/sja1105/sja1105_main.c

@@ -2252,14 +2252,13 @@ int sja1105_static_config_reload(struct sja1105_private *priv,
 	 * change it through the dynamic interface later.
 	 */
 	for (i = 0; i < ds->num_ports; i++) {
-		u32 reg_addr = mdiobus_c45_addr(MDIO_MMD_VEND2, MDIO_CTRL1);
-
 		speed_mbps[i] = sja1105_port_speed_to_ethtool(priv,
 							      mac[i].speed);
 		mac[i].speed = priv->info->port_speed[SJA1105_SPEED_AUTO];
 
 		if (priv->xpcs[i])
-			bmcr[i] = mdiobus_read(priv->mdio_pcs, i, reg_addr);
+			bmcr[i] = mdiobus_c45_read(priv->mdio_pcs, i,
+						   MDIO_MMD_VEND2, MDIO_CTRL1);
 	}
 
 	/* No PTP operations can run right now */