Commit 6418fd92 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

ARM: dts: imx7d-pico: Add support for the nymph baseboard

Add support for the imx7d pico board with nymph baseboard combination.
Signed-off-by: default avatarFabio Estevam <festevam@gmail.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 8b646cfb
...@@ -619,6 +619,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ ...@@ -619,6 +619,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-nitrogen7.dtb \ imx7d-nitrogen7.dtb \
imx7d-pico-dwarf.dtb \ imx7d-pico-dwarf.dtb \
imx7d-pico-hobbit.dtb \ imx7d-pico-hobbit.dtb \
imx7d-pico-nymph.dtb \
imx7d-pico-pi.dtb \ imx7d-pico-pi.dtb \
imx7d-sbc-imx7.dtb \ imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb \ imx7d-sdb.dtb \
......
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Copyright 2015 Technexion Ltd.
//
// Author: Wig Cheng <wig.cheng@technexion.com>
// Richard Hu <richard.hu@technexion.com>
// Tapani Utriainen <tapani@technexion.com>
/dts-v1/;
#include "imx7d-pico.dtsi"
/ {
model = "TechNexion PICO-IMX7 and NYMPH baseboard";
compatible = "technexion,imx7d-pico-nymph", "fsl,imx7d";
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led {
label = "gpio-led";
gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
};
};
sound {
compatible = "fsl,imx-audio-sgtl5000";
model = "imx7d-sgtl5000";
audio-cpu = <&sai1>;
audio-codec = <&sgtl5000>;
audio-routing =
"LINE_IN", "Line In Jack",
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
};
sys_mclk: clock-sys-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
};
&i2c1 {
clock_frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
sgtl5000: audio-codec@a {
reg = <0x0a>;
compatible = "fsl,sgtl5000";
clocks = <&sys_mclk>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
};
adc@52 {
compatible = "ti,adc081c";
reg = <0x52>;
vref-supply = <&reg_2p5v>;
};
};
&i2c2 {
clock_frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
};
};
&iomuxc {
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14
>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment