Commit 6589ade0 authored by Sathya Perla's avatar Sathya Perla Committed by David S. Miller

be2net: stop issuing FW cmds if any cmd times out

A FW cmd timeout (with a sufficiently large timeout value in the
order of tens of seconds) indicates an unresponsive FW. In this state
issuing further cmds and waiting for a completion will only stall the process.
Signed-off-by: default avatarSathya Perla <sathya.perla@emulex.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 434b3648
......@@ -350,6 +350,8 @@ struct be_adapter {
u32 beacon_state; /* for set_phys_id */
bool eeh_err;
bool ue_detected;
bool fw_timeout;
u32 port_num;
bool promiscuous;
bool wol;
......@@ -357,7 +359,6 @@ struct be_adapter {
u32 function_caps;
u32 rx_fc; /* Rx flow control */
u32 tx_fc; /* Tx flow control */
bool ue_detected;
bool stats_cmd_sent;
int link_speed;
u8 port_type;
......@@ -522,6 +523,11 @@ static inline bool be_multi_rxq(const struct be_adapter *adapter)
return adapter->num_rx_qs > 1;
}
static inline bool be_error(struct be_adapter *adapter)
{
return adapter->eeh_err || adapter->ue_detected || adapter->fw_timeout;
}
extern void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm,
u16 num_popped);
extern void be_link_status_update(struct be_adapter *adapter, u32 link_status);
......
......@@ -31,7 +31,7 @@ static void be_mcc_notify(struct be_adapter *adapter)
struct be_queue_info *mccq = &adapter->mcc_obj.q;
u32 val = 0;
if (adapter->eeh_err)
if (be_error(adapter))
return;
val |= mccq->id & DB_MCCQ_RING_ID_MASK;
......@@ -263,10 +263,10 @@ static int be_mcc_wait_compl(struct be_adapter *adapter)
int i, num, status = 0;
struct be_mcc_obj *mcc_obj = &adapter->mcc_obj;
if (adapter->eeh_err)
for (i = 0; i < mcc_timeout; i++) {
if (be_error(adapter))
return -EIO;
for (i = 0; i < mcc_timeout; i++) {
num = be_process_mcc(adapter, &status);
if (num)
be_cq_notify(adapter, mcc_obj->cq.id,
......@@ -277,7 +277,8 @@ static int be_mcc_wait_compl(struct be_adapter *adapter)
udelay(100);
}
if (i == mcc_timeout) {
dev_err(&adapter->pdev->dev, "mccq poll timed out\n");
dev_err(&adapter->pdev->dev, "FW not responding\n");
adapter->fw_timeout = true;
return -1;
}
return status;
......@@ -295,10 +296,10 @@ static int be_mbox_db_ready_wait(struct be_adapter *adapter, void __iomem *db)
int msecs = 0;
u32 ready;
if (adapter->eeh_err)
do {
if (be_error(adapter))
return -EIO;
do {
ready = ioread32(db);
if (ready == 0xffffffff)
return -1;
......@@ -308,7 +309,8 @@ static int be_mbox_db_ready_wait(struct be_adapter *adapter, void __iomem *db)
break;
if (msecs > 4000) {
dev_err(&adapter->pdev->dev, "mbox poll timed out\n");
dev_err(&adapter->pdev->dev, "FW not responding\n");
adapter->fw_timeout = true;
be_detect_dump_ue(adapter);
return -1;
}
......@@ -546,9 +548,6 @@ int be_cmd_fw_clean(struct be_adapter *adapter)
u8 *wrb;
int status;
if (adapter->eeh_err)
return -EIO;
if (mutex_lock_interruptible(&adapter->mbox_lock))
return -1;
......@@ -1012,9 +1011,6 @@ int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
u8 subsys = 0, opcode = 0;
int status;
if (adapter->eeh_err)
return -EIO;
if (mutex_lock_interruptible(&adapter->mbox_lock))
return -1;
......@@ -1136,9 +1132,6 @@ int be_cmd_if_destroy(struct be_adapter *adapter, int interface_id, u32 domain)
struct be_cmd_req_if_destroy *req;
int status;
if (adapter->eeh_err)
return -EIO;
if (interface_id == -1)
return 0;
......
......@@ -3569,6 +3569,8 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev)
dev_info(&adapter->pdev->dev, "EEH reset\n");
adapter->eeh_err = false;
adapter->ue_detected = false;
adapter->fw_timeout = false;
status = pci_enable_device(pdev);
if (status)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment