[PATCH] tmscsim: 64-bit cleanup

Ok, here comes the first one. I chose this one because it fixes an actual
bug in the driver. This bug was (partially) introduced by myself when
porting to 2.6. Partly the reason was that I disliked using
function-like macros as lvalues:

sg_dma_address(x) = ...
sg_dma_len(x) = ...

[OT] wouldn't it be better to introduce some macros like
set_sg_dma_{address|len}(x, y)?

A part of the original patch has already been merged (s/UINT/ULONG/), so,
the actual version is re-diffed against 2.6.6-bk6 and re-tested (on a
plain Pentium).

Also updates the driver-version, printed on startup.

drivers/scsi/dc390.h

@@ -19,7 +19,7 @@
 #endif
 
 #define DC390_BANNER "Tekram DC390/AM53C974"
-#define DC390_VERSION "2.0f 2000-12-20"
+#define DC390_VERSION "2.1b 2004-04-13"
 
 /* We don't have eh_abort_handler, eh_device_reset_handler, 
  * eh_bus_reset_handler, eh_host_reset_handler yet! 

drivers/scsi/scsiiom.c

@@ -740,9 +740,9 @@ dc390_restore_ptr (PACB pACB, PSRB pSRB)
 	psgl = pSRB->pSegmentList;
 	//dc390_pci_sync(pSRB);
 
-	while (pSRB->TotalXferredLen + (ULONG) psgl->length < pSRB->Saved_Ptr)
+	while (pSRB->TotalXferredLen + (ULONG) sg_dma_len(psgl) < pSRB->Saved_Ptr)
 	{
-	    pSRB->TotalXferredLen += (ULONG) psgl->length;
+	    pSRB->TotalXferredLen += (ULONG) sg_dma_len(psgl);
 	    pSRB->SGIndex++;
 	    if( pSRB->SGIndex < pSRB->SGcount )
 	    {
@@ -762,7 +762,7 @@ dc390_restore_ptr (PACB pACB, PSRB pSRB)
     } else if(pcmd->request_buffer) {
 	//dc390_pci_sync(pSRB);
 
-	pSRB->Segmentx.length = pcmd->request_bufflen - pSRB->Saved_Ptr;
+	sg_dma_len(&pSRB->Segmentx) = pcmd->request_bufflen - pSRB->Saved_Ptr;
 	pSRB->SGcount = 1;
 	pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
     } else {
@@ -885,6 +885,8 @@ dc390_DataIO_Comm( PACB pACB, PSRB pSRB, UCHAR ioDir)
 	if (pDCB) printk (KERN_ERR "DC390: pSRB == pTmpSRB! (TagQ Error?) (%02i-%i)\n",
 			  pDCB->TargetID, pDCB->TargetLUN);
 	else printk (KERN_ERR "DC390: pSRB == pTmpSRB! (TagQ Error?) (DCB 0!)\n");
+
+	pSRB->pSRBDCB = pDCB;
 	dc390_EnableMsgOut_Abort (pACB, pSRB);
 	if (pDCB) pDCB->DCBFlag |= ABORT_DEV;
 	return;
@@ -1466,7 +1468,7 @@ dc390_SRBdone( PACB pACB, PDCB pDCB, PSRB pSRB )
 		ptr2 = pSRB->pSegmentList;
 		for( i=pSRB->SGIndex; i < bval; i++)
 		{
-		    swlval += ptr2->length;
+		    swlval += sg_dma_len(ptr2);
 		    ptr2++;
 		}
 		REMOVABLEDEBUG(printk(KERN_INFO "XferredLen=%08x,NotXferLen=%08x\n",\

drivers/scsi/tmscsim.c

@@ -168,6 +168,7 @@
  *	2.1a  03/11/29  GL, KG	Initial fixing for 2.6. Convert to	*
  *				use the current PCI-mapping API, update	*
  *				command-queuing.			*
+ *	2.1b  04/04/13  GL	Fix for 64-bit platforms		*
  ***********************************************************************/
 
 /* Uncomment SA_INTERRUPT, if the driver refuses to share its IRQ with other devices */
@@ -1022,7 +1023,7 @@ static int dc390_pci_map (PSRB pSRB)
 			pci_map_page(pdev, virt_to_page(pcmd->sense_buffer),
 				     (unsigned long)pcmd->sense_buffer & ~PAGE_MASK, sizeof(pcmd->sense_buffer),
 				     DMA_FROM_DEVICE);
-		pSRB->Segmentx.length = sizeof(pcmd->sense_buffer);
+		sg_dma_len(&pSRB->Segmentx) = sizeof(pcmd->sense_buffer);
 		pSRB->SGcount = 1;
 		pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
 		DEBUG1(printk("%s(): Mapped sense buffer %p at %x\n", __FUNCTION__, pcmd->sense_buffer, cmdp->saved_dma_handle));
@@ -1043,7 +1044,7 @@ static int dc390_pci_map (PSRB pSRB)
 				     (unsigned long)pcmd->request_buffer & ~PAGE_MASK,
 				     pcmd->request_bufflen, scsi_to_pci_dma_dir(pcmd->sc_data_direction));
 		/* TODO: error handling */
-		pSRB->Segmentx.length = pcmd->request_bufflen;
+		sg_dma_len(&pSRB->Segmentx) = pcmd->request_bufflen;
 		pSRB->SGcount = 1;
 		pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
 		DEBUG1(printk("%s(): Mapped request buffer %p at %x\n", __FUNCTION__, pcmd->request_buffer, cmdp->saved_dma_handle));
@@ -1180,7 +1181,7 @@ int DC390_queue_command (Scsi_Cmnd *cmd, void (* done)(Scsi_Cmnd *))
     /* Assume BAD_TARGET; will be cleared later */
     cmd->result = DID_BAD_TARGET << 16;
    
-    /* TODO: Change the policy: Alway accept TEST_UNIT_READY or INQUIRY 
+    /* TODO: Change the policy: Always accept TEST_UNIT_READY or INQUIRY 
      * commands and alloc a DCB for the device if not yet there. DCB will
      * be removed in dc390_SRBdone if SEL_TIMEOUT */
 
@@ -1767,7 +1768,7 @@ void dc390_initDCB( PACB pACB, PDCB *ppDCB, UCHAR id, UCHAR lun )
     PDCB pDCB, pDCB2;
 
     pDCB = kmalloc (sizeof(DC390_DCB), GFP_ATOMIC);
-    DCBDEBUG(printk (KERN_INFO "DC390: alloc mem for DCB (ID %i, LUN %i): %p\n"	\
+    DCBDEBUG(printk (KERN_INFO "DC390: alloc mem for DCB (ID %i, LUN %i): %p\n",	\
 		     id, lun, pDCB));
  
     *ppDCB = pDCB;
@@ -2229,10 +2230,13 @@ int __init DC390_detect (Scsi_Host_Template *psht)
     if ( PCI_PRESENT )
 	while (PCI_FIND_DEVICE (PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD53C974))
 	{
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,3,30)
 	    if (pci_enable_device (pdev))
 		continue;
-#endif
+
+	    if (pci_set_dma_mask(pdev, 0xffffffff)) {
+		    printk(KERN_ERR "DC390(%i): No suitable DMA available.\n", dc390_adapterCnt);
+		    continue;
+	    }
 	    PCI_GET_IO_AND_IRQ;
 	    DEBUG0(printk(KERN_INFO "DC390(%i): IO_PORT=%04x,IRQ=%x\n", dc390_adapterCnt, (UINT) io_port, irq));