ARM: dts: Configure interconnect target module for omap5 hdmi

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module and drop "ti,hwmods" peroperty as this module is a child node
of dispc and has no dependencies to to legacy platform data.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/omap5.dtsi

@@ -440,16 +440,32 @@ dsi2: encoder@0 {
 					};
 				};
 
-				hdmi: encoder@40000 {
+				target-module@40000 {
+					compatible = "ti,sysc-omap4", "ti,sysc";
+					reg = <0x40000 0x4>,
+					      <0x40010 0x4>;
+					reg-names = "rev", "sysc";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>,
+							<SYSC_IDLE_SMART_WKUP>;
+					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck", "dss_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x40000 0x40000>;
+
+					hdmi: encoder@0 {
 						compatible = "ti,omap5-hdmi";
-					reg = <0x40000 0x200>,
-					      <0x40200 0x80>,
-					      <0x40300 0x80>,
-					      <0x60000 0x19000>;
+						reg = <0 0x200>,
+						      <0x200 0x80>,
+						      <0x300 0x80>,
+						      <0x20000 0x19000>;
 						reg-names = "wp", "pll", "phy", "core";
 						interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 						status = "disabled";
-					ti,hwmods = "dss_hdmi";
 						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
 							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
 						clock-names = "fck", "sys_clk";
@@ -458,6 +474,7 @@ hdmi: encoder@40000 {
 					};
 				};
 			};
+		};
 
 		abb_mpu: regulator-abb-mpu {
 			compatible = "ti,abb-v2";