arm64: dts: qcom: Make -cells decimal

The property logically makes sense in decimal, and is the standard used
elsewhere.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501212446.2570364-3-ahalaney@redhat.com

arch/arm64/boot/dts/qcom/ipq6018.dtsi

@@ -571,7 +571,7 @@ intc: interrupt-controller@b000000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <0x3>;
+			#interrupt-cells = <3>;
 			reg = <0x0 0x0b000000 0x0 0x1000>,  /*GICD*/
 			      <0x0 0x0b002000 0x0 0x1000>,  /*GICC*/
 			      <0x0 0x0b001000 0x0 0x1000>,  /*GICH*/

arch/arm64/boot/dts/qcom/ipq8074.dtsi

@@ -29,8 +29,8 @@ xo: xo {
 	};
 
 	cpus {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
@@ -106,8 +106,8 @@ scm {
 	};
 
 	soc: soc {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
@@ -321,9 +321,9 @@ tlmm: pinctrl@1000000 {
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 70>;
-			#gpio-cells = <0x2>;
+			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <0x2>;
+			#interrupt-cells = <2>;
 
 			serial_4_pins: serial4-state {
 				pins = "gpio23", "gpio24";
@@ -666,7 +666,7 @@ intc: interrupt-controller@b000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			interrupt-controller;
-			#interrupt-cells = <0x3>;
+			#interrupt-cells = <3>;
 			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
 			ranges = <0 0xb00a000 0xffd>;
 

arch/arm64/boot/dts/qcom/msm8953.dtsi

@@ -1505,8 +1505,8 @@ apcs: mailbox@b011000 {
 		timer@b120000 {
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0b120000 0x1000>;
-			#address-cells = <0x01>;
-			#size-cells = <0x01>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			ranges;
 
 			frame@b121000 {

arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts

@@ -27,8 +27,8 @@ &ethernet {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	mdio {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
 		phy1: phy@4 {
 			compatible = "ethernet-phy-ieee802.3-c22";

arch/arm64/boot/dts/qcom/sa8155p-adp.dts

@@ -353,8 +353,8 @@ &ethernet {
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		/* Micrel KSZ9031RNZ PHY */
 		rgmii_phy: phy@7 {