Merge tag 'linux-watchdog-5.11-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - Removal of the pnx83xx driver

 - Add a binding for A100's watchdog controller

 - Add Rockchip compatibles to snps,dw-wdt.yaml

 - hpwdt: Disable NMI in Crash Kernel

 - Fix potential dereferencing of null pointer in watchdog_core

 - Several other small fixes and improvements

* tag 'linux-watchdog-5.11-rc1' of git://www.linux-watchdog.org/linux-watchdog: (23 commits)
  watchdog: convert comma to semicolon
  watchdog: iTCO_wdt: use dev_*() instead of pr_*() for logging
  dt-binding: watchdog: add Rockchip compatibles to snps,dw-wdt.yaml
  watchdog: coh901327: add COMMON_CLK dependency
  dt-bindings: watchdog: sun4i: Add A100 compatible
  watchdog: qcom: Avoid context switch in restart handler
  watchdog: iTCO_wdt: use module_platform_device() macro
  watchdog: Fix potential dereferencing of null pointer
  watchdog: wdat_wdt: Fix missing kerneldoc reported by W=1
  watchdog/hpwdt: Reflect changes
  watchdog/hpwdt: Disable NMI in Crash Kernel
  wdt: sp805: add watchdog_stop on reboot
  watchdog: sbc_fitpc2_wdt: add __user annotations
  watchdog: geodewdt: remove unneeded break
  watchdog: rti-wdt: fix reference leak in rti_wdt_probe
  watchdog: qcom_wdt: set WDOG_HW_RUNNING bit when appropriate
  watchdog: remove pnx83xx driver
  watchdog: stm32_iwdg: don't print an error on probe deferral
  watchdog: sprd: change to use usleep_range() instead of busy loop
  watchdog: sprd: check busy bit before new loading rather than after that
  ...

Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml

@@ -21,6 +21,9 @@ properties:
       - items:
           - const: allwinner,sun50i-a64-wdt
           - const: allwinner,sun6i-a31-wdt
+      - items:
+          - const: allwinner,sun50i-a100-wdt
+          - const: allwinner,sun6i-a31-wdt
       - items:
           - const: allwinner,sun50i-h6-wdt
           - const: allwinner,sun6i-a31-wdt

Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml

@@ -14,7 +14,15 @@ maintainers:
 
 properties:
   compatible:
-    const: snps,dw-wdt
+    oneOf:
+      - const: snps,dw-wdt
+      - items:
+          - enum:
+              - rockchip,rk3066-wdt
+              - rockchip,rk3188-wdt
+              - rockchip,rk3288-wdt
+              - rockchip,rk3368-wdt
+          - const: snps,dw-wdt
 
   reg:
     maxItems: 1

drivers/watchdog/Kconfig

@@ -386,6 +386,7 @@ config ARM_SBSA_WATCHDOG
 config ARMADA_37XX_WATCHDOG
 	tristate "Armada 37xx watchdog"
 	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on HAS_IOMEM
 	select MFD_SYSCON
 	select WATCHDOG_CORE
 	help
@@ -631,7 +632,7 @@ config SUNXI_WATCHDOG
 
 config COH901327_WATCHDOG
 	bool "ST-Ericsson COH 901 327 watchdog"
-	depends on ARCH_U300 || (ARM && COMPILE_TEST)
+	depends on ARCH_U300 || (ARM && COMMON_CLK && COMPILE_TEST)
 	default y if MACH_U300
 	select WATCHDOG_CORE
 	help
@@ -789,6 +790,7 @@ config MOXART_WDT
 
 config SIRFSOC_WATCHDOG
 	tristate "SiRFSOC watchdog"
+	depends on HAS_IOMEM
 	depends on ARCH_SIRF || COMPILE_TEST
 	select WATCHDOG_CORE
 	default y
@@ -1696,16 +1698,6 @@ config WDT_MTX1
 	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
 	  will reboot the machine after a 100 seconds timer expired.
 
-config PNX833X_WDT
-	tristate "PNX833x Hardware Watchdog"
-	depends on SOC_PNX8335
-	depends on BROKEN
-	help
-	  Hardware driver for the PNX833x's watchdog. This is a
-	  watchdog timer that will reboot the machine after a programmable
-	  timer has expired and no process has written to /dev/watchdog during
-	  that time.
-
 config SIBYTE_WDOG
 	tristate "Sibyte SoC hardware watchdog"
 	depends on CPU_SB1 || (MIPS && COMPILE_TEST)

drivers/watchdog/Makefile

@@ -161,7 +161,6 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
 obj-$(CONFIG_INDYDOG) += indydog.o
 obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
 obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
-obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
 obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
 obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
 obj-$(CONFIG_TXX9_WDT) += txx9wdt.o

drivers/watchdog/geodewdt.c

@@ -150,8 +150,6 @@ static long geodewdt_ioctl(struct file *file, unsigned int cmd,
 	case WDIOC_GETSUPPORT:
 		return copy_to_user(argp, &ident,
 				    sizeof(ident)) ? -EFAULT : 0;
-		break;
-
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
 		return put_user(0, p);

drivers/watchdog/hpwdt.c

@@ -21,8 +21,9 @@
 #include <linux/types.h>
 #include <linux/watchdog.h>
 #include <asm/nmi.h>
+#include <linux/crash_dump.h>
 
-#define HPWDT_VERSION			"2.0.3"
+#define HPWDT_VERSION			"2.0.4"
 #define SECS_TO_TICKS(secs)		((secs) * 1000 / 128)
 #define TICKS_TO_SECS(ticks)		((ticks) * 128 / 1000)
 #define HPWDT_MAX_TICKS			65535
@@ -334,6 +335,11 @@ static int hpwdt_init_one(struct pci_dev *dev,
 	watchdog_set_nowayout(&hpwdt_dev, nowayout);
 	watchdog_init_timeout(&hpwdt_dev, soft_margin, NULL);
 
+	if (is_kdump_kernel()) {
+		pretimeout = 0;
+		kdumptimeout = 0;
+	}
+
 	if (pretimeout && hpwdt_dev.timeout <= PRETIMEOUT_SEC) {
 		dev_warn(&dev->dev, "timeout <= pretimeout. Setting pretimeout to zero\n");
 		pretimeout = 0;

drivers/watchdog/iTCO_wdt.c

@@ -40,8 +40,6 @@
  *	Includes, defines, variables, module parameters, ...
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 /* Module and version information */
 #define DRV_NAME	"iTCO_wdt"
 #define DRV_VERSION	"1.11"
@@ -279,7 +277,7 @@ static int iTCO_wdt_start(struct watchdog_device *wd_dev)
 	/* disable chipset's NO_REBOOT bit */
 	if (p->update_no_reboot_bit(p->no_reboot_priv, false)) {
 		spin_unlock(&p->io_lock);
-		pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n");
+		dev_err(wd_dev->parent, "failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n");
 		return -EIO;
 	}
 
@@ -510,7 +508,7 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 	/* Check chipset's NO_REBOOT bit */
 	if (p->update_no_reboot_bit(p->no_reboot_priv, false) &&
 	    iTCO_vendor_check_noreboot_on()) {
-		pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
+		dev_info(dev, "unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
 		return -ENODEV;	/* Cannot reset NO_REBOOT bit */
 	}
 
@@ -530,12 +528,12 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 	if (!devm_request_region(dev, p->tco_res->start,
 				 resource_size(p->tco_res),
 				 pdev->name)) {
-		pr_err("I/O address 0x%04llx already in use, device disabled\n",
+		dev_err(dev, "I/O address 0x%04llx already in use, device disabled\n",
 		       (u64)TCOBASE(p));
 		return -EBUSY;
 	}
 
-	pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n",
+	dev_info(dev, "Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n",
 		pdata->name, pdata->version, (u64)TCOBASE(p));
 
 	/* Clear out the (probably old) status */
@@ -575,7 +573,7 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 	   if not reset to the default */
 	if (iTCO_wdt_set_timeout(&p->wddev, heartbeat)) {
 		iTCO_wdt_set_timeout(&p->wddev, WATCHDOG_TIMEOUT);
-		pr_info("timeout value out of range, using %d\n",
+		dev_info(dev, "timeout value out of range, using %d\n",
 			WATCHDOG_TIMEOUT);
 	}
 
@@ -583,11 +581,11 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 	watchdog_stop_on_unregister(&p->wddev);
 	ret = devm_watchdog_register_device(dev, &p->wddev);
 	if (ret != 0) {
-		pr_err("cannot register watchdog device (err=%d)\n", ret);
+		dev_err(dev, "cannot register watchdog device (err=%d)\n", ret);
 		return ret;
 	}
 
-	pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
+	dev_info(dev, "initialized. heartbeat=%d sec (nowayout=%d)\n",
 		heartbeat, nowayout);
 
 	return 0;
@@ -651,21 +649,7 @@ static struct platform_driver iTCO_wdt_driver = {
 	},
 };
 
-static int __init iTCO_wdt_init_module(void)
-{
-	pr_info("Intel TCO WatchDog Timer Driver v%s\n", DRV_VERSION);
-
-	return platform_driver_register(&iTCO_wdt_driver);
-}
-
-static void __exit iTCO_wdt_cleanup_module(void)
-{
-	platform_driver_unregister(&iTCO_wdt_driver);
-	pr_info("Watchdog Module Unloaded\n");
-}
-
-module_init(iTCO_wdt_init_module);
-module_exit(iTCO_wdt_cleanup_module);
+module_platform_driver(iTCO_wdt_driver);
 
 MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
 MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver");

drivers/watchdog/mpc8xxx_wdt.c

@@ -175,8 +175,8 @@ static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
 
 	spin_lock_init(&ddata->lock);
 
-	ddata->wdd.info = &mpc8xxx_wdt_info,
-	ddata->wdd.ops = &mpc8xxx_wdt_ops,
+	ddata->wdd.info = &mpc8xxx_wdt_info;
+	ddata->wdd.ops = &mpc8xxx_wdt_ops;
 
 	ddata->wdd.timeout = WATCHDOG_TIMEOUT;
 	watchdog_init_timeout(&ddata->wdd, timeout, dev);

drivers/watchdog/pnx833x_wdt.c

-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  PNX833x Hardware Watchdog Driver
- *  Copyright 2008 NXP Semiconductors
- *  Daniel Laird <daniel.j.laird@nxp.com>
- *  Andre McCurdy <andre.mccurdy@nxp.com>
- *
- *  Heavily based upon - IndyDog	0.3
- *  A Hardware Watchdog Device for SGI IP22
- *
- * (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved.
- *
- * based on softdog.c by Alan Cox <alan@redhat.com>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <asm/mach-pnx833x/pnx833x.h>
-
-#define WATCHDOG_TIMEOUT 30		/* 30 sec Maximum timeout */
-#define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */
-#define	PNX_WATCHDOG_TIMEOUT	(WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY)
-#define PNX_TIMEOUT_VALUE	2040000000U
-
-/** CONFIG block */
-#define PNX833X_CONFIG                      (0x07000U)
-#define PNX833X_CONFIG_CPU_WATCHDOG         (0x54)
-#define PNX833X_CONFIG_CPU_WATCHDOG_COMPARE (0x58)
-#define PNX833X_CONFIG_CPU_COUNTERS_CONTROL (0x1c)
-
-/** RESET block */
-#define PNX833X_RESET                       (0x08000U)
-#define PNX833X_RESET_CONFIG                (0x08)
-
-static int pnx833x_wdt_alive;
-
-/* Set default timeout in MHZ.*/
-static int pnx833x_wdt_timeout = PNX_WATCHDOG_TIMEOUT;
-module_param(pnx833x_wdt_timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default="
-			__MODULE_STRING(PNX_TIMEOUT_VALUE) "(30 seconds).");
-
-static bool nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, bool, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
-					__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-#define START_DEFAULT	1
-static int start_enabled = START_DEFAULT;
-module_param(start_enabled, int, 0);
-MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion "
-				"(default=" __MODULE_STRING(START_DEFAULT) ")");
-
-static void pnx833x_wdt_start(void)
-{
-	/* Enable watchdog causing reset. */
-	PNX833X_REG(PNX833X_RESET + PNX833X_RESET_CONFIG) |= 0x1;
-	/* Set timeout.*/
-	PNX833X_REG(PNX833X_CONFIG +
-		PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout;
-	/* Enable watchdog. */
-	PNX833X_REG(PNX833X_CONFIG +
-				PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1;
-
-	pr_info("Started watchdog timer\n");
-}
-
-static void pnx833x_wdt_stop(void)
-{
-	/* Disable watchdog causing reset. */
-	PNX833X_REG(PNX833X_RESET + PNX833X_CONFIG) &= 0xFFFFFFFE;
-	/* Disable watchdog.*/
-	PNX833X_REG(PNX833X_CONFIG +
-			PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE;
-
-	pr_info("Stopped watchdog timer\n");
-}
-
-static void pnx833x_wdt_ping(void)
-{
-	PNX833X_REG(PNX833X_CONFIG +
-		PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout;
-}
-
-/*
- *	Allow only one person to hold it open
- */
-static int pnx833x_wdt_open(struct inode *inode, struct file *file)
-{
-	if (test_and_set_bit(0, &pnx833x_wdt_alive))
-		return -EBUSY;
-
-	if (nowayout)
-		__module_get(THIS_MODULE);
-
-	/* Activate timer */
-	if (!start_enabled)
-		pnx833x_wdt_start();
-
-	pnx833x_wdt_ping();
-
-	pr_info("Started watchdog timer\n");
-
-	return stream_open(inode, file);
-}
-
-static int pnx833x_wdt_release(struct inode *inode, struct file *file)
-{
-	/* Shut off the timer.
-	 * Lock it in if it's a module and we defined ...NOWAYOUT */
-	if (!nowayout)
-		pnx833x_wdt_stop(); /* Turn the WDT off */
-
-	clear_bit(0, &pnx833x_wdt_alive);
-	return 0;
-}
-
-static ssize_t pnx833x_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-{
-	/* Refresh the timer. */
-	if (len)
-		pnx833x_wdt_ping();
-
-	return len;
-}
-
-static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd,
-							unsigned long arg)
-{
-	int options, new_timeout = 0;
-	uint32_t timeout, timeout_left = 0;
-
-	static const struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
-		.firmware_version = 0,
-		.identity = "Hardware Watchdog for PNX833x",
-	};
-
-	switch (cmd) {
-	default:
-		return -ENOTTY;
-
-	case WDIOC_GETSUPPORT:
-		if (copy_to_user((struct watchdog_info *)arg,
-				 &ident, sizeof(ident)))
-			return -EFAULT;
-		return 0;
-
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, (int *)arg);
-
-	case WDIOC_SETOPTIONS:
-		if (get_user(options, (int *)arg))
-			return -EFAULT;
-
-		if (options & WDIOS_DISABLECARD)
-			pnx833x_wdt_stop();
-
-		if (options & WDIOS_ENABLECARD)
-			pnx833x_wdt_start();
-
-		return 0;
-
-	case WDIOC_KEEPALIVE:
-		pnx833x_wdt_ping();
-		return 0;
-
-	case WDIOC_SETTIMEOUT:
-	{
-		if (get_user(new_timeout, (int *)arg))
-			return -EFAULT;
-
-		pnx833x_wdt_timeout = new_timeout;
-		PNX833X_REG(PNX833X_CONFIG +
-			PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = new_timeout;
-		return put_user(new_timeout, (int *)arg);
-	}
-
-	case WDIOC_GETTIMEOUT:
-		timeout = PNX833X_REG(PNX833X_CONFIG +
-					PNX833X_CONFIG_CPU_WATCHDOG_COMPARE);
-		return put_user(timeout, (int *)arg);
-
-	case WDIOC_GETTIMELEFT:
-		timeout_left = PNX833X_REG(PNX833X_CONFIG +
-						PNX833X_CONFIG_CPU_WATCHDOG);
-		return put_user(timeout_left, (int *)arg);
-
-	}
-}
-
-static int pnx833x_wdt_notify_sys(struct notifier_block *this,
-					unsigned long code, void *unused)
-{
-	if (code == SYS_DOWN || code == SYS_HALT)
-		pnx833x_wdt_stop(); /* Turn the WDT off */
-
-	return NOTIFY_DONE;
-}
-
-static const struct file_operations pnx833x_wdt_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= pnx833x_wdt_write,
-	.unlocked_ioctl	= pnx833x_wdt_ioctl,
-	.compat_ioctl	= compat_ptr_ioctl,
-	.open		= pnx833x_wdt_open,
-	.release	= pnx833x_wdt_release,
-};
-
-static struct miscdevice pnx833x_wdt_miscdev = {
-	.minor		= WATCHDOG_MINOR,
-	.name		= "watchdog",
-	.fops		= &pnx833x_wdt_fops,
-};
-
-static struct notifier_block pnx833x_wdt_notifier = {
-	.notifier_call = pnx833x_wdt_notify_sys,
-};
-
-static int __init watchdog_init(void)
-{
-	int ret, cause;
-
-	/* Lets check the reason for the reset.*/
-	cause = PNX833X_REG(PNX833X_RESET);
-	/*If bit 31 is set then watchdog was cause of reset.*/
-	if (cause & 0x80000000) {
-		pr_info("The system was previously reset due to the watchdog firing - please investigate...\n");
-	}
-
-	ret = register_reboot_notifier(&pnx833x_wdt_notifier);
-	if (ret) {
-		pr_err("cannot register reboot notifier (err=%d)\n", ret);
-		return ret;
-	}
-
-	ret = misc_register(&pnx833x_wdt_miscdev);
-	if (ret) {
-		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
-		       WATCHDOG_MINOR, ret);
-		unregister_reboot_notifier(&pnx833x_wdt_notifier);
-		return ret;
-	}
-
-	pr_info("Hardware Watchdog Timer for PNX833x: Version 0.1\n");
-
-	if (start_enabled)
-		pnx833x_wdt_start();
-
-	return 0;
-}
-
-static void __exit watchdog_exit(void)
-{
-	misc_deregister(&pnx833x_wdt_miscdev);
-	unregister_reboot_notifier(&pnx833x_wdt_notifier);
-}
-
-module_init(watchdog_init);
-module_exit(watchdog_exit);
-
-MODULE_AUTHOR("Daniel Laird/Andre McCurdy");
-MODULE_DESCRIPTION("Hardware Watchdog Device for PNX833x");
-MODULE_LICENSE("GPL");

drivers/watchdog/qcom-wdt.c

@@ -148,10 +148,17 @@ static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action,
 	 */
 	wmb();
 
-	msleep(150);
+	mdelay(150);
 	return 0;
 }
 
+static int qcom_wdt_is_running(struct watchdog_device *wdd)
+{
+	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
+
+	return (readl(wdt_addr(wdt, WDT_EN)) & QCOM_WDT_ENABLE);
+}
+
 static const struct watchdog_ops qcom_wdt_ops = {
 	.start		= qcom_wdt_start,
 	.stop		= qcom_wdt_stop,
@@ -294,6 +301,17 @@ static int qcom_wdt_probe(struct platform_device *pdev)
 	wdt->wdd.timeout = min(wdt->wdd.max_timeout, 30U);
 	watchdog_init_timeout(&wdt->wdd, 0, dev);
 
+	/*
+	 * If WDT is already running, call WDT start which
+	 * will stop the WDT, set timeouts as bootloader
+	 * might use different ones and set running bit
+	 * to inform the WDT subsystem to ping the WDT
+	 */
+	if (qcom_wdt_is_running(&wdt->wdd)) {
+		qcom_wdt_start(&wdt->wdd);
+		set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
+	}
+
 	ret = devm_watchdog_register_device(dev, &wdt->wdd);
 	if (ret)
 		return ret;

drivers/watchdog/rti_wdt.c

@@ -227,8 +227,10 @@ static int rti_wdt_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(dev);
 	ret = pm_runtime_get_sync(dev);
-	if (ret)
+	if (ret) {
+		pm_runtime_put_noidle(dev);
 		return dev_err_probe(dev, ret, "runtime pm failed\n");
+	}
 
 	platform_set_drvdata(pdev, wdt);
 

drivers/watchdog/sbc_fitpc2_wdt.c

@@ -78,7 +78,7 @@ static int fitpc2_wdt_open(struct inode *inode, struct file *file)
 	return stream_open(inode, file);
 }
 
-static ssize_t fitpc2_wdt_write(struct file *file, const char *data,
+static ssize_t fitpc2_wdt_write(struct file *file, const char __user *data,
 						size_t len, loff_t *ppos)
 {
 	size_t i;
@@ -125,16 +125,16 @@ static long fitpc2_wdt_ioctl(struct file *file, unsigned int cmd,
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		ret = copy_to_user((struct watchdog_info *)arg, &ident,
+		ret = copy_to_user((struct watchdog_info __user *)arg, &ident,
 				   sizeof(ident)) ? -EFAULT : 0;
 		break;
 
 	case WDIOC_GETSTATUS:
-		ret = put_user(0, (int *)arg);
+		ret = put_user(0, (int __user *)arg);
 		break;
 
 	case WDIOC_GETBOOTSTATUS:
-		ret = put_user(0, (int *)arg);
+		ret = put_user(0, (int __user *)arg);
 		break;
 
 	case WDIOC_KEEPALIVE:
@@ -143,7 +143,7 @@ static long fitpc2_wdt_ioctl(struct file *file, unsigned int cmd,
 		break;
 
 	case WDIOC_SETTIMEOUT:
-		ret = get_user(time, (int *)arg);
+		ret = get_user(time, (int __user *)arg);
 		if (ret)
 			break;
 
@@ -157,7 +157,7 @@ static long fitpc2_wdt_ioctl(struct file *file, unsigned int cmd,
 		fallthrough;
 
 	case WDIOC_GETTIMEOUT:
-		ret = put_user(margin, (int *)arg);
+		ret = put_user(margin, (int __user *)arg);
 		break;
 	}
 

drivers/watchdog/sp805_wdt.c

@@ -291,6 +291,7 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
 		set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
 	}
 
+	watchdog_stop_on_reboot(&wdt->wdd);
 	ret = watchdog_register_device(&wdt->wdd);
 	if (ret)
 		goto err;

drivers/watchdog/sprd_wdt.c

@@ -6,6 +6,7 @@
 
 #include <linux/bitops.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
@@ -53,7 +54,7 @@
 
 #define SPRD_WDT_CNT_HIGH_SHIFT		16
 #define SPRD_WDT_LOW_VALUE_MASK		GENMASK(15, 0)
-#define SPRD_WDT_LOAD_TIMEOUT		1000
+#define SPRD_WDT_LOAD_TIMEOUT		11
 
 struct sprd_wdt {
 	void __iomem *base;
@@ -108,6 +109,23 @@ static int sprd_wdt_load_value(struct sprd_wdt *wdt, u32 timeout,
 	u32 tmr_step = timeout * SPRD_WDT_CNT_STEP;
 	u32 prtmr_step = pretimeout * SPRD_WDT_CNT_STEP;
 
+	/*
+	 * Checking busy bit to make sure the previous loading operation is
+	 * done. According to the specification, the busy bit would be set
+	 * after a new loading operation and last 2 or 3 RTC clock
+	 * cycles (about 60us~92us).
+	 */
+	do {
+		val = readl_relaxed(wdt->base + SPRD_WDT_INT_RAW);
+		if (!(val & SPRD_WDT_LD_BUSY_BIT))
+			break;
+
+		usleep_range(10, 100);
+	} while (delay_cnt++ < SPRD_WDT_LOAD_TIMEOUT);
+
+	if (delay_cnt >= SPRD_WDT_LOAD_TIMEOUT)
+		return -EBUSY;
+
 	sprd_wdt_unlock(wdt->base);
 	writel_relaxed((tmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) &
 		      SPRD_WDT_LOW_VALUE_MASK, wdt->base + SPRD_WDT_LOAD_HIGH);
@@ -120,20 +138,6 @@ static int sprd_wdt_load_value(struct sprd_wdt *wdt, u32 timeout,
 		       wdt->base + SPRD_WDT_IRQ_LOAD_LOW);
 	sprd_wdt_lock(wdt->base);
 
-	/*
-	 * Waiting the load value operation done,
-	 * it needs two or three RTC clock cycles.
-	 */
-	do {
-		val = readl_relaxed(wdt->base + SPRD_WDT_INT_RAW);
-		if (!(val & SPRD_WDT_LD_BUSY_BIT))
-			break;
-
-		cpu_relax();
-	} while (delay_cnt++ < SPRD_WDT_LOAD_TIMEOUT);
-
-	if (delay_cnt >= SPRD_WDT_LOAD_TIMEOUT)
-		return -EBUSY;
 	return 0;
 }
 
@@ -345,15 +349,10 @@ static int __maybe_unused sprd_wdt_pm_resume(struct device *dev)
 	if (ret)
 		return ret;
 
-	if (watchdog_active(&wdt->wdd)) {
+	if (watchdog_active(&wdt->wdd))
 		ret = sprd_wdt_start(&wdt->wdd);
-		if (ret) {
-			sprd_wdt_disable(wdt);
-			return ret;
-		}
-	}
 
-	return 0;
+	return ret;
 }
 
 static const struct dev_pm_ops sprd_wdt_pm_ops = {

drivers/watchdog/stm32_iwdg.c

@@ -162,18 +162,15 @@ static int stm32_iwdg_clk_init(struct platform_device *pdev,
 	u32 ret;
 
 	wdt->clk_lsi = devm_clk_get(dev, "lsi");
-	if (IS_ERR(wdt->clk_lsi)) {
-		dev_err(dev, "Unable to get lsi clock\n");
-		return PTR_ERR(wdt->clk_lsi);
-	}
+	if (IS_ERR(wdt->clk_lsi))
+		return dev_err_probe(dev, PTR_ERR(wdt->clk_lsi), "Unable to get lsi clock\n");
 
 	/* optional peripheral clock */
 	if (wdt->data->has_pclk) {
 		wdt->clk_pclk = devm_clk_get(dev, "pclk");
-		if (IS_ERR(wdt->clk_pclk)) {
-			dev_err(dev, "Unable to get pclk clock\n");
-			return PTR_ERR(wdt->clk_pclk);
-		}
+		if (IS_ERR(wdt->clk_pclk))
+			return dev_err_probe(dev, PTR_ERR(wdt->clk_pclk),
+					     "Unable to get pclk clock\n");
 
 		ret = clk_prepare_enable(wdt->clk_pclk);
 		if (ret) {

drivers/watchdog/watchdog_core.c

@@ -267,6 +267,9 @@ static int __watchdog_register_device(struct watchdog_device *wdd)
 	}
 
 	if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status)) {
+		if (!wdd->ops->stop)
+			pr_warn("watchdog%d: stop_on_reboot not supported\n", wdd->id);
+		else {
 			wdd->reboot_nb.notifier_call = watchdog_reboot_notifier;
 
 			ret = register_reboot_notifier(&wdd->reboot_nb);
@@ -278,6 +281,7 @@ static int __watchdog_register_device(struct watchdog_device *wdd)
 				return ret;
 			}
 		}
+	}
 
 	if (wdd->ops->restart) {
 		wdd->restart_nb.notifier_call = watchdog_restart_notifier;

drivers/watchdog/wdat_wdt.c

@@ -34,7 +34,7 @@ struct wdat_instruction {
  * @period: How long is one watchdog period in ms
  * @stopped_in_sleep: Is this watchdog stopped by the firmware in S1-S5
  * @stopped: Was the watchdog stopped by the driver in suspend
- * @actions: An array of instruction lists indexed by an action number from
+ * @instructions: An array of instruction lists indexed by an action number from
  *                the WDAT table. There can be %NULL entries for not implemented
  *                actions.
  */