crypto: qat - add AES-CTR support for QAT GEN4 devices

Add support for AES-CTR for QAT GEN4 devices.
Also, introduce the capability ICP_ACCEL_CAPABILITIES_AES_V2 and the
helper macro HW_CAP_AES_V2, which allow to distinguish between
different HW generations.
Co-developed-by: Tomasz Kowalik <tomaszx.kowalik@intel.com>
Signed-off-by: Tomasz Kowalik <tomaszx.kowalik@intel.com>
Co-developed-by: Mateusz Polrola <mateuszx.potrola@intel.com>
Signed-off-by: Mateusz Polrola <mateuszx.potrola@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/qat/qat_common/icp_qat_fw_la.h

@@ -33,6 +33,9 @@ struct icp_qat_fw_la_bulk_req {
 	struct icp_qat_fw_comn_req_cd_ctrl cd_ctrl;
 };
 
+#define ICP_QAT_FW_LA_USE_UCS_SLICE_TYPE 1
+#define QAT_LA_SLICE_TYPE_BITPOS 14
+#define QAT_LA_SLICE_TYPE_MASK 0x3
 #define ICP_QAT_FW_LA_GCM_IV_LEN_12_OCTETS 1
 #define ICP_QAT_FW_LA_GCM_IV_LEN_NOT_12_OCTETS 0
 #define QAT_FW_LA_ZUC_3G_PROTO_FLAG_BITPOS 12
@@ -179,6 +182,10 @@ struct icp_qat_fw_la_bulk_req {
 	QAT_FIELD_SET(flags, val, QAT_LA_PARTIAL_BITPOS, \
 	QAT_LA_PARTIAL_MASK)
 
+#define ICP_QAT_FW_LA_SLICE_TYPE_SET(flags, val) \
+	QAT_FIELD_SET(flags, val, QAT_LA_SLICE_TYPE_BITPOS, \
+	QAT_LA_SLICE_TYPE_MASK)
+
 struct icp_qat_fw_cipher_req_hdr_cd_pars {
 	union {
 		struct {

drivers/crypto/qat/qat_common/icp_qat_hw.h

@@ -65,6 +65,11 @@ struct icp_qat_hw_auth_config {
 	__u32 reserved;
 };
 
+struct icp_qat_hw_ucs_cipher_config {
+	__u32 val;
+	__u32 reserved[3];
+};
+
 enum icp_qat_slice_mask {
 	ICP_ACCEL_MASK_CIPHER_SLICE = BIT(0),
 	ICP_ACCEL_MASK_AUTH_SLICE = BIT(1),
@@ -86,6 +91,8 @@ enum icp_qat_capabilities_mask {
 	ICP_ACCEL_CAPABILITIES_RAND = BIT(7),
 	ICP_ACCEL_CAPABILITIES_ZUC = BIT(8),
 	ICP_ACCEL_CAPABILITIES_SHA3 = BIT(9),
+	/* Bits 10-25 are currently reserved */
+	ICP_ACCEL_CAPABILITIES_AES_V2 = BIT(26)
 };
 
 #define QAT_AUTH_MODE_BITPOS 4
@@ -278,7 +285,15 @@ struct icp_qat_hw_cipher_aes256_f8 {
 	__u8 key[ICP_QAT_HW_AES_256_F8_KEY_SZ];
 };
 
+struct icp_qat_hw_ucs_cipher_aes256_f8 {
+	struct icp_qat_hw_ucs_cipher_config cipher_config;
+	__u8 key[ICP_QAT_HW_AES_256_F8_KEY_SZ];
+};
+
 struct icp_qat_hw_cipher_algo_blk {
+	union {
 		struct icp_qat_hw_cipher_aes256_f8 aes;
+		struct icp_qat_hw_ucs_cipher_aes256_f8 ucs_aes;
+	};
 } __aligned(64);
 #endif

drivers/crypto/qat/qat_common/qat_algs.c

@@ -33,6 +33,10 @@
 				       ICP_QAT_HW_CIPHER_KEY_CONVERT, \
 				       ICP_QAT_HW_CIPHER_DECRYPT)
 
+#define HW_CAP_AES_V2(accel_dev) \
+	(GET_HW_DATA(accel_dev)->accel_capabilities_mask & \
+	 ICP_ACCEL_CAPABILITIES_AES_V2)
+
 static DEFINE_MUTEX(algs_lock);
 static unsigned int active_devs;
 
@@ -416,12 +420,23 @@ static void qat_alg_skcipher_init_com(struct qat_alg_skcipher_ctx *ctx,
 	struct icp_qat_fw_comn_req_hdr_cd_pars *cd_pars = &req->cd_pars;
 	struct icp_qat_fw_comn_req_hdr *header = &req->comn_hdr;
 	struct icp_qat_fw_cipher_cd_ctrl_hdr *cd_ctrl = (void *)&req->cd_ctrl;
+	bool aes_v2_capable = HW_CAP_AES_V2(ctx->inst->accel_dev);
+	int mode = ctx->mode;
 
-	memcpy(cd->aes.key, key, keylen);
 	qat_alg_init_common_hdr(header);
 	header->service_cmd_id = ICP_QAT_FW_LA_CMD_CIPHER;
 	cd_pars->u.s.content_desc_params_sz =
 				sizeof(struct icp_qat_hw_cipher_algo_blk) >> 3;
+
+	if (aes_v2_capable && mode == ICP_QAT_HW_CIPHER_CTR_MODE) {
+		ICP_QAT_FW_LA_SLICE_TYPE_SET(header->serv_specif_flags,
+					     ICP_QAT_FW_LA_USE_UCS_SLICE_TYPE);
+		keylen = round_up(keylen, 16);
+		memcpy(cd->ucs_aes.key, key, keylen);
+	} else {
+		memcpy(cd->aes.key, key, keylen);
+	}
+
 	/* Cipher CD config setup */
 	cd_ctrl->cipher_key_sz = keylen >> 3;
 	cd_ctrl->cipher_state_sz = AES_BLOCK_SIZE >> 3;