Commit 681a02e9 authored by Roger Lu's avatar Roger Lu Committed by Matthias Brugger

soc: mediatek: SVS: introduce MTK SVS engine

The Smart Voltage Scaling(SVS) engine is a piece of hardware
which calculates suitable SVS bank voltages to OPP voltage table.
Then, DVFS driver could apply those SVS bank voltages to PMIC/Buck
when receiving OPP_EVENT_ADJUST_VOLTAGE.
Signed-off-by: default avatarRoger Lu <roger.lu@mediatek.com>
Reviewed-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: default avatarKevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-4-roger.lu@mediatek.comSigned-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
parent d969f217
...@@ -73,4 +73,14 @@ config MTK_MMSYS ...@@ -73,4 +73,14 @@ config MTK_MMSYS
Say yes here to add support for the MediaTek Multimedia Say yes here to add support for the MediaTek Multimedia
Subsystem (MMSYS). Subsystem (MMSYS).
config MTK_SVS
tristate "MediaTek Smart Voltage Scaling(SVS)"
depends on MTK_EFUSE && NVMEM
help
The Smart Voltage Scaling(SVS) engine is a piece of hardware
which has several controllers(banks) for calculating suitable
voltage to different power domains(CPU/GPU/CCI) according to
chip process corner, temperatures and other factors. Then DVFS
driver could apply SVS bank voltage to PMIC/Buck.
endmenu endmenu
...@@ -7,3 +7,4 @@ obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o ...@@ -7,3 +7,4 @@ obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
obj-$(CONFIG_MTK_SCPSYS_PM_DOMAINS) += mtk-pm-domains.o obj-$(CONFIG_MTK_SCPSYS_PM_DOMAINS) += mtk-pm-domains.o
obj-$(CONFIG_MTK_MMSYS) += mtk-mmsys.o obj-$(CONFIG_MTK_MMSYS) += mtk-mmsys.o
obj-$(CONFIG_MTK_MMSYS) += mtk-mutex.o obj-$(CONFIG_MTK_MMSYS) += mtk-mutex.o
obj-$(CONFIG_MTK_SVS) += mtk-svs.o
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment