ASoC: wm9081: Move WM9081 IRQ platform data handling into I2C probe

Better style and better supports idle_bias_off which we're going to
implement.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

sound/soc/codecs/wm9081.c

@@ -1258,7 +1258,6 @@ static int wm9081_probe(struct snd_soc_codec *codec)
 {
 	struct wm9081_priv *wm9081 = snd_soc_codec_get_drvdata(codec);
 	int ret;
-	u16 reg;
 
 	codec->control_data = wm9081->regmap;
 
@@ -1268,16 +1267,6 @@ static int wm9081_probe(struct snd_soc_codec *codec)
 		return ret;
 	}
 
-	reg = 0;
-	if (wm9081->pdata.irq_high)
-		reg |= WM9081_IRQ_POL;
-	if (!wm9081->pdata.irq_cmos)
-		reg |= WM9081_IRQ_OP_CTRL;
-	snd_soc_update_bits(codec, WM9081_INTERRUPT_CONTROL,
-			    WM9081_IRQ_POL | WM9081_IRQ_OP_CTRL, reg);
-
-	wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
 	/* Enable zero cross by default */
 	snd_soc_update_bits(codec, WM9081_ANALOGUE_LINEOUT,
 			    WM9081_LINEOUTZC, WM9081_LINEOUTZC);
@@ -1395,6 +1384,15 @@ static __devinit int wm9081_i2c_probe(struct i2c_client *i2c,
 		memcpy(&wm9081->pdata, dev_get_platdata(&i2c->dev),
 		       sizeof(wm9081->pdata));
 
+	reg = 0;
+	if (wm9081->pdata.irq_high)
+		reg |= WM9081_IRQ_POL;
+	if (!wm9081->pdata.irq_cmos)
+		reg |= WM9081_IRQ_OP_CTRL;
+	regmap_update_bits(wm9081->regmap, WM9081_INTERRUPT_CONTROL,
+			   WM9081_IRQ_POL | WM9081_IRQ_OP_CTRL, reg);
+
+
 	ret = snd_soc_register_codec(&i2c->dev,
 			&soc_codec_dev_wm9081, &wm9081_dai, 1);
 	if (ret < 0)