arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios

Rockpro64 is not able boot if GPIO1_C1 pin is pulled high
before loading linux kernel.

In rockpro64 GPIO1_C1 pin is connected vdd_cpu_b regulator
VSEL pin. Pin should be pulled down in normal operation and
pulled high in suspend.

PMIC LDO_REG2 is connected to touch panel connector.
Rename regulator and set it to correct voltage.

PCIe power is controller by GPIO1_D0.

Schematics can be downloaded from:
http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdfSigned-off-by: Oskari Lemmela <oskari@lemmela.net>
Acked-by: Akash Gajjar <Akash_Gajjar@mentor.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts

@@ -97,7 +97,7 @@ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 	vcc3v3_pcie: vcc3v3-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pcie_pwr_en>;
 		regulator-name = "vcc3v3_pcie";
@@ -293,12 +293,12 @@ regulator-state-mem {
 				};
 			};
 
-			vcc2v8_dvp: LDO_REG2 {
-				regulator-name = "vcc2v8_dvp";
+			vcc3v0_touch: LDO_REG2 {
+				regulator-name = "vcc3v0_touch";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -397,7 +397,9 @@ regulator-state-mem {
 	vdd_cpu_b: regulator@40 {
 		compatible = "silergy,syr827";
 		reg = <0x40>;
-		fcs,suspend-voltage-selector = <0>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -415,6 +417,8 @@ vdd_gpu: regulator@41 {
 		compatible = "silergy,syr828";
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -519,7 +523,7 @@ lcd_panel_reset: lcd-panel-reset {
 
 	pcie {
 		pcie_pwr_en: pcie-pwr-en {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
@@ -529,7 +533,7 @@ pmic_int_l: pmic-int-l {
 		};
 
 		vsel1_gpio: vsel1-gpio {
-			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
 		vsel2_gpio: vsel2-gpio {