Commit 69a07f18 authored by Rafael J. Wysocki's avatar Rafael J. Wysocki

Merge back cpufreq changes for v4.12.

parents 2f0ba790 19678ffb
......@@ -3450,6 +3450,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
T: git git://git.linaro.org/people/vireshk/linux.git (For ARM Updates)
B: https://bugzilla.kernel.org
F: Documentation/cpu-freq/
F: Documentation/devicetree/bindings/cpufreq/
F: drivers/cpufreq/
F: include/linux/cpufreq.h
F: tools/testing/selftests/cpufreq/
......
......@@ -1170,11 +1170,6 @@ external-bus@50000000 {
status = "disabled";
};
cpufreq-cooling {
compatible = "stericsson,db8500-cpufreq-cooling";
status = "disabled";
};
mcde@a0350000 {
compatible = "stericsson,mcde";
reg = <0xa0350000 0x1000>, /* MCDE */
......
......@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/cpufreq.h>
#include <linux/cpu_cooling.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
......@@ -18,6 +19,7 @@
static struct cpufreq_frequency_table *freq_table;
static struct clk *armss_clk;
static struct thermal_cooling_device *cdev;
static int dbx500_cpufreq_target(struct cpufreq_policy *policy,
unsigned int index)
......@@ -32,6 +34,22 @@ static int dbx500_cpufreq_init(struct cpufreq_policy *policy)
return cpufreq_generic_init(policy, freq_table, 20 * 1000);
}
static int dbx500_cpufreq_exit(struct cpufreq_policy *policy)
{
if (!IS_ERR(cdev))
cpufreq_cooling_unregister(cdev);
return 0;
}
static void dbx500_cpufreq_ready(struct cpufreq_policy *policy)
{
cdev = cpufreq_cooling_register(policy->cpus);
if (IS_ERR(cdev))
pr_err("Failed to register cooling device %ld\n", PTR_ERR(cdev));
else
pr_info("Cooling device registered: %s\n", cdev->type);
}
static struct cpufreq_driver dbx500_cpufreq_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS |
CPUFREQ_NEED_INITIAL_FREQ_CHECK,
......@@ -39,6 +57,8 @@ static struct cpufreq_driver dbx500_cpufreq_driver = {
.target_index = dbx500_cpufreq_target,
.get = cpufreq_generic_get,
.init = dbx500_cpufreq_init,
.exit = dbx500_cpufreq_exit,
.ready = dbx500_cpufreq_ready,
.name = "DBX500",
.attr = cpufreq_generic_attr,
};
......
......@@ -573,14 +573,33 @@ static struct platform_driver mt8173_cpufreq_platdrv = {
.probe = mt8173_cpufreq_probe,
};
static int mt8173_cpufreq_driver_init(void)
/* List of machines supported by this driver */
static const struct of_device_id mt8173_cpufreq_machines[] __initconst = {
{ .compatible = "mediatek,mt817x", },
{ .compatible = "mediatek,mt8173", },
{ .compatible = "mediatek,mt8176", },
{ }
};
static int __init mt8173_cpufreq_driver_init(void)
{
struct device_node *np;
const struct of_device_id *match;
struct platform_device *pdev;
int err;
if (!of_machine_is_compatible("mediatek,mt8173"))
np = of_find_node_by_path("/");
if (!np)
return -ENODEV;
match = of_match_node(mt8173_cpufreq_machines, np);
of_node_put(np);
if (!match) {
pr_warn("Machine is not compatible with mt8173-cpufreq\n");
return -ENODEV;
}
err = platform_driver_register(&mt8173_cpufreq_platdrv);
if (err)
return err;
......
......@@ -52,17 +52,27 @@ static u32 get_bus_freq(void)
{
struct device_node *soc;
u32 sysfreq;
struct clk *pltclk;
int ret;
/* get platform freq by searching bus-frequency property */
soc = of_find_node_by_type(NULL, "soc");
if (!soc)
return 0;
if (of_property_read_u32(soc, "bus-frequency", &sysfreq))
sysfreq = 0;
if (soc) {
ret = of_property_read_u32(soc, "bus-frequency", &sysfreq);
of_node_put(soc);
if (!ret)
return sysfreq;
}
/* get platform freq by its clock name */
pltclk = clk_get(NULL, "cg-pll0-div1");
if (IS_ERR(pltclk)) {
pr_err("%s: can't get bus frequency %ld\n",
__func__, PTR_ERR(pltclk));
return PTR_ERR(pltclk);
}
return clk_get_rate(pltclk);
}
static struct clk *cpu_to_clk(int cpu)
......
......@@ -291,18 +291,6 @@ config ARMADA_THERMAL
Enable this option if you want to have support for thermal management
controller present in Armada 370 and Armada XP SoC.
config DB8500_CPUFREQ_COOLING
tristate "DB8500 cpufreq cooling"
depends on ARCH_U8500 || COMPILE_TEST
depends on HAS_IOMEM
depends on CPU_THERMAL
default y
help
Adds DB8500 cpufreq cooling devices, and these cooling devices can be
bound to thermal zone trip points. When a trip point reached, the
bound cpufreq cooling device turns active to set CPU frequency low to
cool down the CPU.
config INTEL_POWERCLAMP
tristate "Intel PowerClamp idle injection driver"
depends on THERMAL
......
......@@ -41,7 +41,6 @@ obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o
obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o
......
/*
* db8500_cpufreq_cooling.c - DB8500 cpufreq works as cooling device.
*
* Copyright (C) 2012 ST-Ericsson
* Copyright (C) 2012 Linaro Ltd.
*
* Author: Hongbo Zhang <hongbo.zhang@linaro.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/cpu_cooling.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
{
struct thermal_cooling_device *cdev;
cdev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(cdev)) {
int ret = PTR_ERR(cdev);
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"Failed to register cooling device %d\n",
ret);
return ret;
}
platform_set_drvdata(pdev, cdev);
dev_info(&pdev->dev, "Cooling device registered: %s\n", cdev->type);
return 0;
}
static int db8500_cpufreq_cooling_remove(struct platform_device *pdev)
{
struct thermal_cooling_device *cdev = platform_get_drvdata(pdev);
cpufreq_cooling_unregister(cdev);
return 0;
}
static int db8500_cpufreq_cooling_suspend(struct platform_device *pdev,
pm_message_t state)
{
return -ENOSYS;
}
static int db8500_cpufreq_cooling_resume(struct platform_device *pdev)
{
return -ENOSYS;
}
#ifdef CONFIG_OF
static const struct of_device_id db8500_cpufreq_cooling_match[] = {
{ .compatible = "stericsson,db8500-cpufreq-cooling" },
{},
};
MODULE_DEVICE_TABLE(of, db8500_cpufreq_cooling_match);
#endif
static struct platform_driver db8500_cpufreq_cooling_driver = {
.driver = {
.name = "db8500-cpufreq-cooling",
.of_match_table = of_match_ptr(db8500_cpufreq_cooling_match),
},
.probe = db8500_cpufreq_cooling_probe,
.suspend = db8500_cpufreq_cooling_suspend,
.resume = db8500_cpufreq_cooling_resume,
.remove = db8500_cpufreq_cooling_remove,
};
static int __init db8500_cpufreq_cooling_init(void)
{
return platform_driver_register(&db8500_cpufreq_cooling_driver);
}
static void __exit db8500_cpufreq_cooling_exit(void)
{
platform_driver_unregister(&db8500_cpufreq_cooling_driver);
}
/* Should be later than db8500_cpufreq_register */
late_initcall(db8500_cpufreq_cooling_init);
module_exit(db8500_cpufreq_cooling_exit);
MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>");
MODULE_DESCRIPTION("DB8500 cpufreq cooling driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment