Skip to content

L
linux
Commit 69bc3279 authored by Russell King's avatar Russell King
Browse files
Options

[ARM] Update neponset/sa1111 for Linux device model updates. 

This updates these neponset and sa1111 support to use the new system
device infrastructure in the Linux device model.
parent 9c7fd8c7
Hide whitespace changes
Inline Side-by-side
Showing with 241 additions and 192 deletions
arch/arm/mach-sa1100/neponset.c
View file @ 69bc3279
...@@ -193,20 +193,30 @@ static int neponset_resume(struct device *dev, u32 level) ...@@ -193,20 +193,30 @@ static int neponset_resume(struct device *dev, u32 level)
} }
static struct device_driver neponset_device_driver = { static struct device_driver neponset_device_driver = {
.suspend = neponset_suspend, .name = "NEPONSET",
.resume = neponset_resume, .bus = &system_bus_type,
.suspend = neponset_suspend,
.resume = neponset_resume,
}; };
static struct device neponset_device = { static struct sys_device neponset_device = {
.name = "Neponset", .name = "NEPONSET",
.bus_id = "neponset", .id = 0,
.driver = &neponset_device_driver, .root = NULL,
.dev = {
.name = "Neponset",
.bus_id = "neponset",
.bus = &system_bus_type,
.driver = &neponset_device_driver,
},
}; };
static int __init neponset_init(void) static int __init neponset_init(void)
{ {
int ret; int ret;
driver_register(&neponset_device_driver);
/* /*
* The Neponset is only present on the Assabet machine type. * The Neponset is only present on the Assabet machine type.
*/ */
...@@ -231,7 +241,7 @@ static int __init neponset_init(void) ...@@ -231,7 +241,7 @@ static int __init neponset_init(void)
return -ENODEV; return -ENODEV;
} }
ret = register_sys_device(&neponset_device); ret = sys_device_register(&neponset_device);
if (ret) if (ret)
return ret; return ret;
...@@ -256,7 +266,7 @@ static int __init neponset_init(void) ...@@ -256,7 +266,7 @@ static int __init neponset_init(void)
return sa1111_init(0x40000000, IRQ_NEPONSET_SA1111); return sa1111_init(0x40000000, IRQ_NEPONSET_SA1111);
} }
arch_initcall(neponset_init); subsys_initcall(neponset_init);
static struct map_desc neponset_io_desc[] __initdata = { static struct map_desc neponset_io_desc[] __initdata = {
/* virtual physical length type */ /* virtual physical length type */
......
arch/arm/mach-sa1100/sa1111.c
View file @ 69bc3279
...@@ -43,7 +43,7 @@ ...@@ -43,7 +43,7 @@
* anchor point for all the other drivers. * anchor point for all the other drivers.
*/ */
struct sa1111 { struct sa1111 {
struct device dev; struct device *dev;
struct resource res; struct resource res;
int irq; int irq;
spinlock_t lock; spinlock_t lock;
...@@ -64,7 +64,7 @@ static struct sa1111_dev usb_dev = { ...@@ -64,7 +64,7 @@ static struct sa1111_dev usb_dev = {
.devid = SA1111_DEVID_USB, .devid = SA1111_DEVID_USB,
.irq = { .irq = {
IRQ_USBPWR, IRQ_USBPWR,
IRQ_NHCIM, IRQ_HCIM,
IRQ_HCIBUFFACC, IRQ_HCIBUFFACC,
IRQ_HCIRMTWKP, IRQ_HCIRMTWKP,
IRQ_NHCIMFCIR, IRQ_NHCIMFCIR,
...@@ -148,7 +148,6 @@ static struct sa1111_dev *devs[] = { ...@@ -148,7 +148,6 @@ static struct sa1111_dev *devs[] = {
&ssp_dev, &ssp_dev,
&kbd_dev, &kbd_dev,
&mse_dev, &mse_dev,
&int_dev,
&pcmcia_dev, &pcmcia_dev,
}; };
...@@ -158,7 +157,6 @@ static unsigned int dev_offset[] = { ...@@ -158,7 +157,6 @@ static unsigned int dev_offset[] = {
0x0800, 0x0800,
SA1111_KBD, SA1111_KBD,
SA1111_MSE, SA1111_MSE,
SA1111_INTC,
0x1800, 0x1800,
}; };
...@@ -372,7 +370,106 @@ static void __init sa1111_init_irq(struct sa1111_dev *sadev) ...@@ -372,7 +370,106 @@ static void __init sa1111_init_irq(struct sa1111_dev *sadev)
set_irq_chained_handler(sadev->irq[0], sa1111_irq_handler); set_irq_chained_handler(sadev->irq[0], sa1111_irq_handler);
} }
static struct device_driver sa1111_device_driver; /*
* Bring the SA1111 out of reset. This requires a set procedure:
* 1. nRESET asserted (by hardware)
* 2. CLK turned on from SA1110
* 3. nRESET deasserted
* 4. VCO turned on, PLL_BYPASS turned off
* 5. Wait lock time, then assert RCLKEn
* 7. PCR set to allow clocking of individual functions
*
* Until we've done this, the only registers we can access are:
* SBI_SKCR
* SBI_SMCR
* SBI_SKID
*/
static void sa1111_wake(struct sa1111 *sachip)
{
unsigned long flags, r;
spin_lock_irqsave(&sachip->lock, flags);
/*
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
* (SA-1110 Developer's Manual, section 9.1.2.1)
*/
GAFR |= GPIO_32_768kHz;
GPDR |= GPIO_32_768kHz;
TUCR = TUCR_3_6864MHz;
/*
* Turn VCO on, and disable PLL Bypass.
*/
r = sa1111_readl(sachip->base + SA1111_SKCR);
r &= ~SKCR_VCO_OFF;
sa1111_writel(r, sachip->base + SA1111_SKCR);
r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
sa1111_writel(r, sachip->base + SA1111_SKCR);
/*
* Wait lock time. SA1111 manual _doesn't_
* specify a figure for this! We choose 100us.
*/
udelay(100);
/*
* Enable RCLK. We also ensure that RDYEN is set.
*/
r |= SKCR_RCLKEN | SKCR_RDYEN;
sa1111_writel(r, sachip->base + SA1111_SKCR);
/*
* Wait 14 RCLK cycles for the chip to finish coming out
* of reset. (RCLK=24MHz). This is 590ns.
*/
udelay(1);
/*
* Ensure all clocks are initially off.
*/
sa1111_writel(0, sachip->base + SA1111_SKPCR);
spin_unlock_irqrestore(&sachip->lock, flags);
}
/*
* Configure the SA1111 shared memory controller.
*/
void
sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
unsigned int cas_latency)
{
unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
if (cas_latency == 3)
smcr |= SMCR_CLAT;
sa1111_writel(smcr, sachip->base + SA1111_SMCR);
}
static void
sa1111_init_one_child(struct sa1111 *sachip, struct sa1111_dev *sadev, unsigned int offset)
{
snprintf(sadev->dev.bus_id, sizeof(sadev->dev.bus_id),
"%4.4x", offset);
sadev->dev.parent = sachip->dev;
sadev->dev.bus = &sa1111_bus_type;
sadev->res.start = sachip->res.start + offset;
sadev->res.end = sadev->res.start + 511;
sadev->res.name = sadev->dev.name;
sadev->res.flags = IORESOURCE_MEM;
sadev->mapbase = sachip->base + offset;
if (request_resource(&sachip->res, &sadev->res)) {
printk("SA1111: failed to allocate resource for %s\n",
sadev->res.name);
return;
}
device_register(&sadev->dev);
}
/** /**
* sa1111_probe - probe for a single SA1111 chip. * sa1111_probe - probe for a single SA1111 chip.
...@@ -387,11 +484,11 @@ static struct device_driver sa1111_device_driver; ...@@ -387,11 +484,11 @@ static struct device_driver sa1111_device_driver;
* %0 successful. * %0 successful.
*/ */
static int __init static int __init
sa1111_probe(unsigned long phys_addr, int irq) __sa1111_probe(struct device *me, unsigned long phys_addr, int irq)
{ {
struct sa1111 *sachip; struct sa1111 *sachip;
unsigned long id; unsigned long id;
unsigned int has_devs; unsigned int has_devs, val;
int i, ret = -ENODEV; int i, ret = -ENODEV;
sachip = kmalloc(sizeof(struct sa1111), GFP_KERNEL); sachip = kmalloc(sizeof(struct sa1111), GFP_KERNEL);
...@@ -402,12 +499,10 @@ sa1111_probe(unsigned long phys_addr, int irq) ...@@ -402,12 +499,10 @@ sa1111_probe(unsigned long phys_addr, int irq)
spin_lock_init(&sachip->lock); spin_lock_init(&sachip->lock);
strncpy(sachip->dev.name, "Intel Corporation SA1111", sizeof(sachip->dev.name)); sachip->dev = me;
snprintf(sachip->dev.bus_id, sizeof(sachip->dev.bus_id), "%8.8lx", phys_addr); dev_set_drvdata(sachip->dev, sachip);
sachip->dev.driver = &sa1111_device_driver;
sachip->dev.driver_data = sachip;
sachip->res.name = sachip->dev.name; sachip->res.name = me->name;
sachip->res.start = phys_addr; sachip->res.start = phys_addr;
sachip->res.end = phys_addr + 0x2000; sachip->res.end = phys_addr + 0x2000;
sachip->irq = irq; sachip->irq = irq;
...@@ -417,6 +512,10 @@ sa1111_probe(unsigned long phys_addr, int irq) ...@@ -417,6 +512,10 @@ sa1111_probe(unsigned long phys_addr, int irq)
goto out; goto out;
} }
/*
* Map the whole region. This also maps the
* registers for our children.
*/
sachip->base = ioremap(phys_addr, PAGE_SIZE * 2); sachip->base = ioremap(phys_addr, PAGE_SIZE * 2);
if (!sachip->base) { if (!sachip->base) {
ret = -ENOMEM; ret = -ENOMEM;
...@@ -433,17 +532,47 @@ sa1111_probe(unsigned long phys_addr, int irq) ...@@ -433,17 +532,47 @@ sa1111_probe(unsigned long phys_addr, int irq)
goto unmap; goto unmap;
} }
/*
* We found the chip.
*/
ret = register_sys_device(&sachip->dev);
if (ret)
printk("sa1111 device_register failed: %d\n", ret);
printk(KERN_INFO "SA1111 Microprocessor Companion Chip: " printk(KERN_INFO "SA1111 Microprocessor Companion Chip: "
"silicon revision %lx, metal revision %lx\n", "silicon revision %lx, metal revision %lx\n",
(id & SKID_SIREV_MASK)>>4, (id & SKID_MTREV_MASK)); (id & SKID_SIREV_MASK)>>4, (id & SKID_MTREV_MASK));
/*
* We found it. Wake the chip up, and initialise.
*/
sa1111_wake(sachip);
/*
* The SDRAM configuration of the SA1110 and the SA1111 must
* match. This is very important to ensure that SA1111 accesses
* don't corrupt the SDRAM. Note that this ungates the SA1111's
* MBGNT signal, so we must have called sa1110_mb_disable()
* beforehand.
*/
sa1111_configure_smc(sachip, 1,
FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
/*
* We only need to turn on DCLK whenever we want to use the
* DMA. It can otherwise be held firmly in the off position.
* (currently, we always enable it.)
*/
val = sa1111_readl(sachip->base + SA1111_SKPCR);
sa1111_writel(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
/*
* Enable the SA1110 memory bus request and grant signals.
*/
sa1110_mb_enable();
/*
* The interrupt controller must be initialised before any
* other device to ensure that the interrupts are available.
*/
int_dev.irq[0] = irq;
sa1111_init_one_child(sachip, &int_dev, SA1111_INTC);
sa1111_init_irq(&int_dev);
g_sa1111 = sachip; g_sa1111 = sachip;
has_devs = ~0; has_devs = ~0;
...@@ -453,29 +582,9 @@ sa1111_probe(unsigned long phys_addr, int irq) ...@@ -453,29 +582,9 @@ sa1111_probe(unsigned long phys_addr, int irq)
else else
has_devs &= ~(1 << 1); has_devs &= ~(1 << 1);
for (i = 0; i < ARRAY_SIZE(devs); i++) { for (i = 0; i < ARRAY_SIZE(devs); i++)
if (!(has_devs & (1 << i))) if (has_devs & (1 << i))
continue; sa1111_init_one_child(sachip, devs[i], dev_offset[i]);
snprintf(devs[i]->dev.bus_id, sizeof(devs[i]->dev.bus_id),
"%4.4x", dev_offset[i]);
devs[i]->dev.parent = &sachip->dev;
devs[i]->dev.bus = &sa1111_bus_type;
devs[i]->res.start = sachip->res.start + dev_offset[i];
devs[i]->res.end = devs[i]->res.start + 511;
devs[i]->res.name = devs[i]->dev.name;
devs[i]->res.flags = IORESOURCE_MEM;
devs[i]->mapbase = sachip->base + dev_offset[i];
if (request_resource(&sachip->res, &devs[i]->res)) {
printk("SA1111: failed to allocate resource for %s\n",
devs[i]->res.name);
continue;
}
device_register(&devs[i]->dev);
}
return 0; return 0;
...@@ -502,84 +611,6 @@ static void __sa1111_remove(struct sa1111 *sachip) ...@@ -502,84 +611,6 @@ static void __sa1111_remove(struct sa1111 *sachip)
kfree(sachip); kfree(sachip);
} }
/*
* Bring the SA1111 out of reset. This requires a set procedure:
* 1. nRESET asserted (by hardware)
* 2. CLK turned on from SA1110
* 3. nRESET deasserted
* 4. VCO turned on, PLL_BYPASS turned off
* 5. Wait lock time, then assert RCLKEn
* 7. PCR set to allow clocking of individual functions
*
* Until we've done this, the only registers we can access are:
* SBI_SKCR
* SBI_SMCR
* SBI_SKID
*/
static void sa1111_wake(struct sa1111 *sachip)
{
unsigned long flags, r;
spin_lock_irqsave(&sachip->lock, flags);
/*
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
* (SA-1110 Developer's Manual, section 9.1.2.1)
*/
GAFR |= GPIO_32_768kHz;
GPDR |= GPIO_32_768kHz;
TUCR = TUCR_3_6864MHz;
/*
* Turn VCO on, and disable PLL Bypass.
*/
r = sa1111_readl(sachip->base + SA1111_SKCR);
r &= ~SKCR_VCO_OFF;
sa1111_writel(r, sachip->base + SA1111_SKCR);
r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
sa1111_writel(r, sachip->base + SA1111_SKCR);
/*
* Wait lock time. SA1111 manual _doesn't_
* specify a figure for this! We choose 100us.
*/
udelay(100);
/*
* Enable RCLK. We also ensure that RDYEN is set.
*/
r |= SKCR_RCLKEN | SKCR_RDYEN;
sa1111_writel(r, sachip->base + SA1111_SKCR);
/*
* Wait 14 RCLK cycles for the chip to finish coming out
* of reset. (RCLK=24MHz). This is 590ns.
*/
udelay(1);
/*
* Ensure all clocks are initially off.
*/
sa1111_writel(0, sachip->base + SA1111_SKPCR);
spin_unlock_irqrestore(&sachip->lock, flags);
}
/*
* Configure the SA1111 shared memory controller.
*/
void
sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
unsigned int cas_latency)
{
unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
if (cas_latency == 3)
smcr |= SMCR_CLAT;
sa1111_writel(smcr, sachip->base + SA1111_SMCR);
}
/* /*
* According to the "Intel StrongARM SA-1111 Microprocessor Companion * According to the "Intel StrongARM SA-1111 Microprocessor Companion
* Chip Specification Update" (June 2000), erratum #7, there is a * Chip Specification Update" (June 2000), erratum #7, there is a
...@@ -648,52 +679,6 @@ int sa1111_check_dma_bug(dma_addr_t addr) ...@@ -648,52 +679,6 @@ int sa1111_check_dma_bug(dma_addr_t addr)
return 0; return 0;
} }
int sa1111_init(unsigned long phys, unsigned int irq)
{
unsigned int val;
int ret;
ret = sa1111_probe(phys, irq);
if (ret < 0)
return ret;
/*
* We found it. Wake the chip up.
*/
sa1111_wake(g_sa1111);
/*
* The SDRAM configuration of the SA1110 and the SA1111 must
* match. This is very important to ensure that SA1111 accesses
* don't corrupt the SDRAM. Note that this ungates the SA1111's
* MBGNT signal, so we must have called sa1110_mb_disable()
* beforehand.
*/
sa1111_configure_smc(g_sa1111, 1,
FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
/*
* We only need to turn on DCLK whenever we want to use the
* DMA. It can otherwise be held firmly in the off position.
*/
val = sa1111_readl(g_sa1111->base + SA1111_SKPCR);
sa1111_writel(val | SKPCR_DCLKEN, g_sa1111->base + SA1111_SKPCR);
/*
* Enable the SA1110 memory bus request and grant signals.
*/
sa1110_mb_enable();
/*
* Initialise SA1111 IRQs
*/
int_dev.irq[0] = irq;
sa1111_init_irq(&int_dev);
return 0;
}
struct sa1111_save_data { struct sa1111_save_data {
unsigned int skcr; unsigned int skcr;
unsigned int skpcr; unsigned int skpcr;
...@@ -717,7 +702,7 @@ struct sa1111_save_data { ...@@ -717,7 +702,7 @@ struct sa1111_save_data {
static int sa1111_suspend(struct device *dev, u32 state, u32 level) static int sa1111_suspend(struct device *dev, u32 state, u32 level)
{ {
struct sa1111 *sachip = dev->driver_data; struct sa1111 *sachip = dev_get_drvdata(dev);
unsigned long flags; unsigned long flags;
char *base; char *base;
...@@ -789,7 +774,7 @@ static int sa1111_suspend(struct device *dev, u32 state, u32 level) ...@@ -789,7 +774,7 @@ static int sa1111_suspend(struct device *dev, u32 state, u32 level)
*/ */
static int sa1111_resume(struct device *dev, u32 level) static int sa1111_resume(struct device *dev, u32 level)
{ {
struct sa1111 *sachip = dev->driver_data; struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111_save_data *save; struct sa1111_save_data *save;
unsigned long flags, id; unsigned long flags, id;
char *base; char *base;
...@@ -809,6 +794,7 @@ static int sa1111_resume(struct device *dev, u32 level) ...@@ -809,6 +794,7 @@ static int sa1111_resume(struct device *dev, u32 level)
id = sa1111_readl(sachip->base + SA1111_SKID); id = sa1111_readl(sachip->base + SA1111_SKID);
if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
__sa1111_remove(sachip); __sa1111_remove(sachip);
dev_set_drvdata(dev, NULL);
kfree(save); kfree(save);
return 0; return 0;
} }
...@@ -840,18 +826,85 @@ static int sa1111_resume(struct device *dev, u32 level) ...@@ -840,18 +826,85 @@ static int sa1111_resume(struct device *dev, u32 level)
return 0; return 0;
} }
static int sa1111_probe(struct device *dev)
{
return -ENODEV;
}
static int sa1111_remove(struct device *dev)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
if (sachip) {
__sa1111_remove(sachip);
dev_set_drvdata(dev, NULL);
kfree(dev->saved_state);
dev->saved_state = NULL;
}
return 0;
}
/*
* Not sure if this should be on the system bus or not yet.
* We really want some way to register a system device at
* the per-machine level, and then have this driver pick
* up the registered devices.
*
* We also need to handle the SDRAM configuration for
* PXA250/SA1110 machine classes.
*/
static struct device_driver sa1111_device_driver = { static struct device_driver sa1111_device_driver = {
.name = "SA1111",
.bus = &system_bus_type,
.probe = sa1111_probe,
.remove = sa1111_remove,
.suspend = sa1111_suspend, .suspend = sa1111_suspend,
.resume = sa1111_resume, .resume = sa1111_resume,
}; };
/*
* Register the SA1111 driver with LDM.
*/
static int sa1111_driver_init(void)
{
driver_register(&sa1111_device_driver);
return 0;
}
arch_initcall(sa1111_driver_init);
static struct sys_device sa1111_device = {
.name = "SA1111",
.id = 0,
.root = NULL,
.dev = {
.name = "Intel Corporation SA1111",
.driver = &sa1111_device_driver,
},
};
int sa1111_init(unsigned long phys, unsigned int irq)
{
int ret;
snprintf(sa1111_device.dev.bus_id, sizeof(sa1111_device.dev.bus_id), "%8.8lx", phys);
ret = sys_device_register(&sa1111_device);
if (ret)
printk("sa1111 device_register failed: %d\n", ret);
return __sa1111_probe(&sa1111_device.dev, phys, irq);
}
/* /*
* Get the parent device driver (us) structure * Get the parent device driver (us) structure
* from a child function device * from a child function device
*/ */
static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev) static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
{ {
return (struct sa1111 *)sadev->dev.parent->driver_data; return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
} }
/* /*
......
include/asm-arm/arch-sa1100/irqs.h
View file @ 69bc3279
...@@ -109,7 +109,7 @@ ...@@ -109,7 +109,7 @@
#define AUDRDD (IRQ_BOARD_END + 41) #define AUDRDD (IRQ_BOARD_END + 41)
#define AUDSTO (IRQ_BOARD_END + 42) #define AUDSTO (IRQ_BOARD_END + 42)
#define IRQ_USBPWR (IRQ_BOARD_END + 43) #define IRQ_USBPWR (IRQ_BOARD_END + 43)
#define IRQ_NHCIM (IRQ_BOARD_END + 44) #define IRQ_HCIM (IRQ_BOARD_END + 44)
#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) #define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45)
#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) #define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46)
#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) #define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47)
......
include/asm-arm/hardware/sa1111.h
View file @ 69bc3279
...@@ -64,10 +64,6 @@ ...@@ -64,10 +64,6 @@
#define SA1111_SMCR 0x0004 #define SA1111_SMCR 0x0004
#define SA1111_SKID 0x0008 #define SA1111_SKID 0x0008
#define SBI_SKCR __CCREG(SA1111_SKCR)
#define SBI_SMCR __CCREG(SA1111_SMCR)
#define SBI_SKID __CCREG(SA1111_SKID)
#define SKCR_PLL_BYPASS (1<<0) #define SKCR_PLL_BYPASS (1<<0)
#define SKCR_RCLKEN (1<<1) #define SKCR_RCLKEN (1<<1)
#define SKCR_SLEEP (1<<2) #define SKCR_SLEEP (1<<2)
...@@ -131,16 +127,6 @@ ...@@ -131,16 +127,6 @@
#define SA1111_SKPEN1 0x021c #define SA1111_SKPEN1 0x021c
#define SA1111_SKPWM1 0x0220 #define SA1111_SKPWM1 0x0220
#define SKPCR __CCREG(SA1111_SKPCR)
#define SKCDR __CCREG(SA1111_SKCDR)
#define SKAUD __CCREG(SA1111_SKAUD)
#define SKPMC __CCREG(SA1111_SKPMC)
#define SKPTC __CCREG(SA1111_SKPTC)
#define SKPEN0 __CCREG(SA1111_SKPEN0)
#define SKPWM0 __CCREG(SA1111_SKPWM0)
#define SKPEN1 __CCREG(SA1111_SKPEN1)
#define SKPWM1 __CCREG(SA1111_SKPWM1)
#define SKPCR_UCLKEN (1<<0) #define SKPCR_UCLKEN (1<<0)
#define SKPCR_ACCLKEN (1<<1) #define SKPCR_ACCLKEN (1<<1)
#define SKPCR_I2SCLKEN (1<<2) #define SKPCR_I2SCLKEN (1<<2)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7