mmc: core: Fix the HPI execution sequence

mmc_execute_hpi should send the HPI command only once, and only
if the card is in PRG state.

According to eMMC spec, the command's completion time is
not dependent on OUT_OF_INTERRUPT_TIME. Only the transition
out of PRG STATE is guarded by OUT_OF_INTERRUPT_TIME - which
is defined to begin at the end of sending the command itself.

Specify the default timeout for the actual sending of HPI
command, and then use OUT_OF_INTERRUPT_TIME to wait for
the transition out of PRG state.
Reported-by: Alex Lemberg <Alex.Lemberg@sandisk.com>
Signed-off-by: Venkatraman S <svenkatr@ti.com>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

drivers/mmc/core/core.c

@@ -404,6 +404,7 @@ int mmc_interrupt_hpi(struct mmc_card *card)
 {
 	int err;
 	u32 status;
+	unsigned long prg_wait;
 
 	BUG_ON(!card);
 
@@ -419,30 +420,38 @@ int mmc_interrupt_hpi(struct mmc_card *card)
 		goto out;
 	}
 
+	switch (R1_CURRENT_STATE(status)) {
+	case R1_STATE_IDLE:
+	case R1_STATE_READY:
+	case R1_STATE_STBY:
 		/*
-	 * If the card status is in PRG-state, we can send the HPI command.
-	 */
-	if (R1_CURRENT_STATE(status) == R1_STATE_PRG) {
-		do {
-			/*
-			 * We don't know when the HPI command will finish
-			 * processing, so we need to resend HPI until out
-			 * of prg-state, and keep checking the card status
-			 * with SEND_STATUS.  If a timeout error occurs when
-			 * sending the HPI command, we are already out of
-			 * prg-state.
+		 * In idle states, HPI is not needed and the caller
+		 * can issue the next intended command immediately
 		 */
+		goto out;
+	case R1_STATE_PRG:
+		break;
+	default:
+		/* In all other states, it's illegal to issue HPI */
+		pr_debug("%s: HPI cannot be sent. Card state=%d\n",
+			mmc_hostname(card->host), R1_CURRENT_STATE(status));
+		err = -EINVAL;
+		goto out;
+	}
+
 	err = mmc_send_hpi_cmd(card, &status);
 	if (err)
-				pr_debug("%s: abort HPI (%d error)\n",
-					 mmc_hostname(card->host), err);
+		goto out;
 
+	prg_wait = jiffies + msecs_to_jiffies(card->ext_csd.out_of_int_time);
+	do {
 		err = mmc_send_status(card, &status);
-			if (err)
+
+		if (!err && R1_CURRENT_STATE(status) == R1_STATE_TRAN)
 			break;
-		} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
-	} else
-		pr_debug("%s: Left prg-state\n", mmc_hostname(card->host));
+		if (time_after(jiffies, prg_wait))
+			err = -ETIMEDOUT;
+	} while (!err);
 
 out:
 	mmc_release_host(card->host);

drivers/mmc/core/mmc_ops.c

@@ -569,7 +569,6 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
 
 	cmd.opcode = opcode;
 	cmd.arg = card->rca << 16 | 1;
-	cmd.cmd_timeout_ms = card->ext_csd.out_of_int_time;
 
 	err = mmc_wait_for_cmd(card->host, &cmd, 0);
 	if (err) {