Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (39 commits)
  ACPI: EC: Workaround for optimized controllers (version 3)
  ACPI: EC: use printk_ratelimit(), add some DEBUG mode messages
  Revert "ACPI: EC: Workaround for optimized controllers"
  ACPI: fix two IRQ8 issues in IOAPIC mode
  ACPI: Add missing spaces to printk format
  cpuidle: fix HP nx6125 regression
  cpuidle: add sched_clock_idle_[sleep|wakeup]_event() hooks
  cpuidle: fix C3 for no bus-master control case
  ACPI: thinkpad-acpi: fix oops when a module parameter has no value
  Revert "Fix very high interrupt rate for IRQ8 (rtc) unless pnpacpi=off"
  ACPI: EC: Don't init EC early if it has no _INI
  Revert "acpi: make ACPI_PROCFS default to y"
  Revert "ACPI: add documentation for deprecated /proc/acpi/battery in ACPI_PROCFS"
  ACPI: Split out control for /proc/acpi entries from battery, ac, and sbs.
  ACPI: Video: Increase buffer size for writes to brightness proc file.
  ACPI: EC: Workaround for optimized controllers
  ACPI: SBS: Fix retval warning
  ACPI: Enable MSR (FixedHW) support for T-States
  ACPI: Get throttling info from BIOS only after evaluating _PDC
  ACPI: Use _TSS for throttling control, when present. Add error checks.
  ...

Documentation/thinkpad-acpi.txt

 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.16
-                          August 2nd, 2007
+                            Version 0.17
+                         October 04th, 2007
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -923,19 +923,34 @@ sysfs backlight device "thinkpad_screen"
 This feature allows software control of the LCD brightness on ThinkPad
 models which don't have a hardware brightness slider.
 
-It has some limitations: the LCD backlight cannot be actually turned on or off
-by this interface, and in many ThinkPad models, the "dim while on battery"
-functionality will be enabled by the BIOS when this interface is used, and
-cannot be controlled.
-
-The backlight control has eight levels, ranging from 0 to 7.  Some of the
-levels may not be distinct.
-
-There are two interfaces to the firmware for brightness control, EC and CMOS.
-To select which one should be used, use the brightness_mode module parameter:
-brightness_mode=1 selects EC mode, brightness_mode=2 selects CMOS mode,
-brightness_mode=3 selects both EC and CMOS.  The driver tries to autodetect
-which interface to use.
+It has some limitations: the LCD backlight cannot be actually turned on or
+off by this interface, and in many ThinkPad models, the "dim while on
+battery" functionality will be enabled by the BIOS when this interface is
+used, and cannot be controlled.
+
+On IBM (and some of the earlier Lenovo) ThinkPads, the backlight control
+has eight brightness levels, ranging from 0 to 7.  Some of the levels
+may not be distinct.  Later Lenovo models that implement the ACPI
+display backlight brightness control methods have 16 levels, ranging
+from 0 to 15.
+
+There are two interfaces to the firmware for direct brightness control,
+EC and CMOS.  To select which one should be used, use the
+brightness_mode module parameter: brightness_mode=1 selects EC mode,
+brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC
+and CMOS.  The driver tries to autodetect which interface to use.
+
+When display backlight brightness controls are available through the
+standard ACPI interface, it is best to use it instead of this direct
+ThinkPad-specific interface.  The driver will disable its native
+backlight brightness control interface if it detects that the standard
+ACPI interface is available in the ThinkPad.
+
+The brightness_enable module parameter can be used to control whether
+the LCD brightness control feature will be enabled when available.
+brightness_enable=0 forces it to be disabled.  brightness_enable=1
+forces it to be enabled when available, even if the standard ACPI
+interface is also available.
 
 Procfs notes:
 
@@ -947,11 +962,11 @@ Procfs notes:
 
 Sysfs notes:
 
-The interface is implemented through the backlight sysfs class, which is poorly
-documented at this time.
+The interface is implemented through the backlight sysfs class, which is
+poorly documented at this time.
 
-Locate the thinkpad_screen device under /sys/class/backlight, and inside it
-there will be the following attributes:
+Locate the thinkpad_screen device under /sys/class/backlight, and inside
+it there will be the following attributes:
 
 	max_brightness:
 		Reads the maximum brightness the hardware can be set to.
@@ -961,17 +976,19 @@ there will be the following attributes:
 		Reads what brightness the screen is set to at this instant.
 
 	brightness:
-		Writes request the driver to change brightness to the given
-		value.  Reads will tell you what brightness the driver is trying
-		to set the display to when "power" is set to zero and the display
-		has not been dimmed by a kernel power management event.
+		Writes request the driver to change brightness to the
+		given value.  Reads will tell you what brightness the
+		driver is trying to set the display to when "power" is set
+		to zero and the display has not been dimmed by a kernel
+		power management event.
 
 	power:
-		power management mode, where 0 is "display on", and 1 to 3 will
-		dim the display backlight to brightness level 0 because
-		thinkpad-acpi cannot really turn the backlight off.  Kernel
-		power management events can temporarily increase the current
-		power management level, i.e. they can dim the display.
+		power management mode, where 0 is "display on", and 1 to 3
+		will dim the display backlight to brightness level 0
+		because thinkpad-acpi cannot really turn the backlight
+		off.  Kernel power management events can temporarily
+		increase the current power management level, i.e. they can
+		dim the display.
 
 
 Volume control -- /proc/acpi/ibm/volume

arch/x86/kernel/acpi/processor.c

@@ -49,6 +49,9 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c)
 	if (cpu_has(c, X86_FEATURE_EST))
 		buf[2] |= ACPI_PDC_EST_CAPABILITY_SWSMP;
 
+	if (cpu_has(c, X86_FEATURE_ACPI))
+		buf[2] |= ACPI_PDC_T_FFH;
+
 	obj->type = ACPI_TYPE_BUFFER;
 	obj->buffer.length = 12;
 	obj->buffer.pointer = (u8 *) buf;

arch/x86/kernel/acpi/sleep_64.c

@@ -115,6 +115,3 @@ static int __init acpi_sleep_setup(char *str)
 
 __setup("acpi_sleep=", acpi_sleep_setup);
 
-void acpi_pci_link_exit(void)
-{
-}

arch/x86/kernel/io_apic_32.c

@@ -962,7 +962,7 @@ static int EISA_ELCR(unsigned int irq)
 #define default_MCA_trigger(idx)	(1)
 #define default_MCA_polarity(idx)	(0)
 
-static int __init MPBIOS_polarity(int idx)
+static int MPBIOS_polarity(int idx)
 {
 	int bus = mp_irqs[idx].mpc_srcbus;
 	int polarity;
@@ -2830,6 +2830,25 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	return 0;
 }
 
+int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
+{
+	int i;
+
+	if (skip_ioapic_setup)
+		return -1;
+
+	for (i = 0; i < mp_irq_entries; i++)
+		if (mp_irqs[i].mpc_irqtype == mp_INT &&
+		    mp_irqs[i].mpc_srcbusirq == bus_irq)
+			break;
+	if (i >= mp_irq_entries)
+		return -1;
+
+	*trigger = irq_trigger(i);
+	*polarity = irq_polarity(i);
+	return 0;
+}
+
 #endif /* CONFIG_ACPI */
 
 static int __init parse_disable_timer_pin_1(char *arg)

arch/x86/kernel/io_apic_64.c

@@ -546,7 +546,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 #define default_PCI_trigger(idx)	(1)
 #define default_PCI_polarity(idx)	(1)
 
-static int __init MPBIOS_polarity(int idx)
+static int MPBIOS_polarity(int idx)
 {
 	int bus = mp_irqs[idx].mpc_srcbus;
 	int polarity;
@@ -2222,8 +2222,27 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p
 	return 0;
 }
 
-#endif /* CONFIG_ACPI */
 
+int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
+{
+	int i;
+
+	if (skip_ioapic_setup)
+		return -1;
+
+	for (i = 0; i < mp_irq_entries; i++)
+		if (mp_irqs[i].mpc_irqtype == mp_INT &&
+		    mp_irqs[i].mpc_srcbusirq == bus_irq)
+			break;
+	if (i >= mp_irq_entries)
+		return -1;
+
+	*trigger = irq_trigger(i);
+	*polarity = irq_polarity(i);
+	return 0;
+}
+
+#endif /* CONFIG_ACPI */
 
 /*
  * This function currently is only a helper for the i386 smp boot process where
@@ -2260,3 +2279,4 @@ void __init setup_ioapic_dest(void)
 	}
 }
 #endif
+

arch/x86/pci/acpi.c

@@ -13,7 +13,7 @@ static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
 	return 0;
 }
 
-static struct dmi_system_id acpi_pciprobe_dmi_table[] = {
+static struct dmi_system_id acpi_pciprobe_dmi_table[] __devinitdata = {
 /*
  * Systems where PCI IO resource ISA alignment can be skipped
  * when the ISA enable bit in the bridge control is not set

drivers/acpi/Kconfig

@@ -50,7 +50,6 @@ config ACPI_SLEEP
 config ACPI_PROCFS
 	bool "Deprecated /proc/acpi files"
 	depends on PROC_FS
-	default y
 	---help---
 	  For backwards compatibility, this option allows
 	  deprecated /proc/acpi/ files to exist, even when
@@ -61,7 +60,6 @@ config ACPI_PROCFS
 	  /proc/acpi/info (/sys/modules/acpi/parameters/acpica_version)
 	  /proc/acpi/dsdt (/sys/firmware/acpi/tables/DSDT)
 	  /proc/acpi/fadt (/sys/firmware/acpi/tables/FACP)
-	  /proc/acpi/battery (/sys/class/power_supply)
 	  /proc/acpi/debug_layer (/sys/module/acpi/parameters/debug_layer)
 	  /proc/acpi/debug_level (/sys/module/acpi/parameters/debug_level)
 
@@ -69,7 +67,21 @@ config ACPI_PROCFS
 	  and functions which do not yet exist in /sys.
 
 	  Say N to delete /proc/acpi/ files that have moved to /sys/
+config ACPI_PROCFS_POWER
+	bool "Deprecated power /proc/acpi folders"
+	depends on PROC_FS
+	default y
+	---help---
+	  For backwards compatibility, this option allows
+          deprecated power /proc/acpi/ folders to exist, even when
+          they have been replaced by functions in /sys.
+          The deprecated folders (and their replacements) include:
+	  /proc/acpi/battery/* (/sys/class/power_supply/*)
+	  /proc/acpi/ac_adapter/* (sys/class/power_supply/*)
+	  This option has no effect on /proc/acpi/ folders
+	  and functions, which do not yet exist in /sys
 
+	  Say N to delete power /proc/acpi/ folders that have moved to /sys/
 config ACPI_PROC_EVENT
 	bool "Deprecated /proc/acpi/event support"
 	depends on PROC_FS

drivers/acpi/Makefile

@@ -58,6 +58,6 @@ obj-$(CONFIG_ACPI_NUMA)		+= numa.o
 obj-$(CONFIG_ACPI_ASUS)		+= asus_acpi.o
 obj-$(CONFIG_ACPI_TOSHIBA)	+= toshiba_acpi.o
 obj-$(CONFIG_ACPI_HOTPLUG_MEMORY)	+= acpi_memhotplug.o
-obj-y				+= cm_sbs.o
+obj-$(CONFIG_ACPI_PROCFS_POWER)	+= cm_sbs.o
 obj-$(CONFIG_ACPI_SBS)		+= sbs.o
 obj-$(CONFIG_ACPI_SBS)		+= sbshc.o

drivers/acpi/ac.c

@@ -27,7 +27,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/types.h>
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #endif
@@ -51,7 +51,7 @@ MODULE_AUTHOR("Paul Diefenbaugh");
 MODULE_DESCRIPTION("ACPI AC Adapter Driver");
 MODULE_LICENSE("GPL");
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 extern struct proc_dir_entry *acpi_lock_ac_dir(void);
 extern void *acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir);
 static int acpi_ac_open_fs(struct inode *inode, struct file *file);
@@ -86,7 +86,7 @@ struct acpi_ac {
 
 #define to_acpi_ac(x) container_of(x, struct acpi_ac, charger);
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 static const struct file_operations acpi_ac_fops = {
 	.open = acpi_ac_open_fs,
 	.read = seq_read,
@@ -136,7 +136,7 @@ static int acpi_ac_get_state(struct acpi_ac *ac)
 	return 0;
 }
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
@@ -275,7 +275,7 @@ static int acpi_ac_add(struct acpi_device *device)
 	if (result)
 		goto end;
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	result = acpi_ac_add_fs(device);
 #endif
 	if (result)
@@ -300,7 +300,7 @@ static int acpi_ac_add(struct acpi_device *device)
 
       end:
 	if (result) {
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 		acpi_ac_remove_fs(device);
 #endif
 		kfree(ac);
@@ -339,7 +339,7 @@ static int acpi_ac_remove(struct acpi_device *device, int type)
 					    ACPI_ALL_NOTIFY, acpi_ac_notify);
 	if (ac->charger.dev)
 		power_supply_unregister(&ac->charger);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_ac_remove_fs(device);
 #endif
 
@@ -355,7 +355,7 @@ static int __init acpi_ac_init(void)
 	if (acpi_disabled)
 		return -ENODEV;
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_ac_dir = acpi_lock_ac_dir();
 	if (!acpi_ac_dir)
 		return -ENODEV;
@@ -363,7 +363,7 @@ static int __init acpi_ac_init(void)
 
 	result = acpi_bus_register_driver(&acpi_ac_driver);
 	if (result < 0) {
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 		acpi_unlock_ac_dir(acpi_ac_dir);
 #endif
 		return -ENODEV;
@@ -377,7 +377,7 @@ static void __exit acpi_ac_exit(void)
 
 	acpi_bus_unregister_driver(&acpi_ac_driver);
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_unlock_ac_dir(acpi_ac_dir);
 #endif
 

drivers/acpi/battery.c

@@ -31,7 +31,7 @@
 #include <linux/types.h>
 #include <linux/jiffies.h>
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <asm/uaccess.h>
@@ -63,7 +63,7 @@ static unsigned int cache_time = 1000;
 module_param(cache_time, uint, 0644);
 MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 extern struct proc_dir_entry *acpi_lock_battery_dir(void);
 extern void *acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir);
 
@@ -153,6 +153,8 @@ static int acpi_battery_get_property(struct power_supply *psy,
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (battery->state == 0)
 			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
 		break;
 	case POWER_SUPPLY_PROP_PRESENT:
 		val->intval = acpi_battery_present(battery);
@@ -221,7 +223,7 @@ static enum power_supply_property energy_battery_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 inline char *acpi_battery_units(struct acpi_battery *battery)
 {
 	return (battery->power_unit)?"mA":"mW";
@@ -479,7 +481,7 @@ static int acpi_battery_update(struct acpi_battery *battery)
                               FS Interface (/proc)
    -------------------------------------------------------------------------- */
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 static struct proc_dir_entry *acpi_battery_dir;
 
 static int acpi_battery_print_info(struct seq_file *seq, int result)
@@ -786,7 +788,7 @@ static int acpi_battery_add(struct acpi_device *device)
 	acpi_driver_data(device) = battery;
 	mutex_init(&battery->lock);
 	acpi_battery_update(battery);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	result = acpi_battery_add_fs(device);
 	if (result)
 		goto end;
@@ -804,7 +806,7 @@ static int acpi_battery_add(struct acpi_device *device)
 	       device->status.battery_present ? "present" : "absent");
       end:
 	if (result) {
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 		acpi_battery_remove_fs(device);
 #endif
 		kfree(battery);
@@ -823,7 +825,7 @@ static int acpi_battery_remove(struct acpi_device *device, int type)
 	status = acpi_remove_notify_handler(device->handle,
 					    ACPI_ALL_NOTIFY,
 					    acpi_battery_notify);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_battery_remove_fs(device);
 #endif
 	sysfs_remove_battery(battery);
@@ -859,13 +861,13 @@ static int __init acpi_battery_init(void)
 {
 	if (acpi_disabled)
 		return -ENODEV;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_battery_dir = acpi_lock_battery_dir();
 	if (!acpi_battery_dir)
 		return -ENODEV;
 #endif
 	if (acpi_bus_register_driver(&acpi_battery_driver) < 0) {
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 		acpi_unlock_battery_dir(acpi_battery_dir);
 #endif
 		return -ENODEV;
@@ -876,7 +878,7 @@ static int __init acpi_battery_init(void)
 static void __exit acpi_battery_exit(void)
 {
 	acpi_bus_unregister_driver(&acpi_battery_driver);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_unlock_battery_dir(acpi_battery_dir);
 #endif
 }

drivers/acpi/ec.c

@@ -47,6 +47,9 @@
 #undef PREFIX
 #define PREFIX				"ACPI: EC: "
 
+/* Uncomment next line to get verbose print outs*/
+/* #define DEBUG */
+
 /* EC status register */
 #define ACPI_EC_FLAG_OBF	0x01	/* Output buffer full */
 #define ACPI_EC_FLAG_IBF	0x02	/* Input buffer full */
@@ -75,7 +78,10 @@ enum {
 	EC_FLAGS_WAIT_GPE = 0,		/* Don't check status until GPE arrives */
 	EC_FLAGS_QUERY_PENDING,		/* Query is pending */
 	EC_FLAGS_GPE_MODE,		/* Expect GPE to be sent for status change */
-	EC_FLAGS_ONLY_IBF_GPE,		/* Expect GPE only for IBF = 0 event */
+	EC_FLAGS_NO_ADDRESS_GPE,	/* Expect GPE only for non-address event */
+	EC_FLAGS_ADDRESS,		/* Address is being written */
+	EC_FLAGS_NO_WDATA_GPE,		/* Don't expect WDATA GPE event */
+	EC_FLAGS_WDATA,			/* Data is being written */
 };
 
 static int acpi_ec_remove(struct acpi_device *device, int type);
@@ -131,21 +137,27 @@ static struct acpi_ec {
 
 static inline u8 acpi_ec_read_status(struct acpi_ec *ec)
 {
-	return inb(ec->command_addr);
+	u8 x = inb(ec->command_addr);
+	pr_debug(PREFIX "---> status = 0x%2x\n", x);
+	return x;
 }
 
 static inline u8 acpi_ec_read_data(struct acpi_ec *ec)
 {
+	u8 x = inb(ec->data_addr);
+	pr_debug(PREFIX "---> data = 0x%2x\n", x);
 	return inb(ec->data_addr);
 }
 
 static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command)
 {
+	pr_debug(PREFIX "<--- command = 0x%2x\n", command);
 	outb(command, ec->command_addr);
 }
 
 static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data)
 {
+	pr_debug(PREFIX "<--- data = 0x%2x\n", data);
 	outb(data, ec->data_addr);
 }
 
@@ -166,38 +178,54 @@ static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event)
 
 static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
 {
+	int ret = 0;
+	if (unlikely(test_bit(EC_FLAGS_ADDRESS, &ec->flags) &&
+		     test_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags)))
+		force_poll = 1;
+	if (unlikely(test_bit(EC_FLAGS_WDATA, &ec->flags) &&
+		     test_bit(EC_FLAGS_NO_WDATA_GPE, &ec->flags)))
+		force_poll = 1;
 	if (likely(test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) &&
 	    likely(!force_poll)) {
 		if (wait_event_timeout(ec->wait, acpi_ec_check_status(ec, event),
 				       msecs_to_jiffies(ACPI_EC_DELAY)))
-			return 0;
+			goto end;
 		clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
 		if (acpi_ec_check_status(ec, event)) {
-			if (event == ACPI_EC_EVENT_OBF_1) {
-				/* miss OBF = 1 GPE, don't expect it anymore */
-				printk(KERN_INFO PREFIX "missing OBF_1 confirmation,"
-					"switching to degraded mode.\n");
-				set_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags);
+			if (test_bit(EC_FLAGS_ADDRESS, &ec->flags)) {
+				/* miss address GPE, don't expect it anymore */
+				pr_info(PREFIX "missing address confirmation, "
+					"don't expect it any longer.\n");
+				set_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags);
+			} else if (test_bit(EC_FLAGS_WDATA, &ec->flags)) {
+				/* miss write data GPE, don't expect it */
+				pr_info(PREFIX "missing write data confirmation, "
+					"don't expect it any longer.\n");
+				set_bit(EC_FLAGS_NO_WDATA_GPE, &ec->flags);
 			} else {
 				/* missing GPEs, switch back to poll mode */
-				printk(KERN_INFO PREFIX "missing IBF_1 confirmations,"
+				if (printk_ratelimit())
+					pr_info(PREFIX "missing confirmations, "
 						"switch off interrupt mode.\n");
 				clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
 			}
-			return 0;
+			goto end;
 		}
 	} else {
 		unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
 		clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
 		while (time_before(jiffies, delay)) {
 			if (acpi_ec_check_status(ec, event))
-				return 0;
+				goto end;
 		}
 	}
-	printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
+	pr_err(PREFIX "acpi_ec_wait timeout,"
 			       " status = %d, expect_event = %d\n",
 			       acpi_ec_read_status(ec), event);
-	return -ETIME;
+	ret = -ETIME;
+      end:
+	clear_bit(EC_FLAGS_ADDRESS, &ec->flags);
+	return ret;
 }
 
 static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
@@ -208,22 +236,26 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
 	int result = 0;
 	set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
 	acpi_ec_write_cmd(ec, command);
-
+	pr_debug(PREFIX "transaction start\n");
 	for (; wdata_len > 0; --wdata_len) {
 		result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
 		if (result) {
-			printk(KERN_ERR PREFIX
+			pr_err(PREFIX
 			       "write_cmd timeout, command = %d\n", command);
 			goto end;
 		}
+		/* mark the address byte written to EC */
+		if (rdata_len + wdata_len > 1)
+			set_bit(EC_FLAGS_ADDRESS, &ec->flags);
 		set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
 		acpi_ec_write_data(ec, *(wdata++));
 	}
 
 	if (!rdata_len) {
+		set_bit(EC_FLAGS_WDATA, &ec->flags);
 		result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
 		if (result) {
-			printk(KERN_ERR PREFIX
+			pr_err(PREFIX
 			       "finish-write timeout, command = %d\n", command);
 			goto end;
 		}
@@ -231,12 +263,9 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
 		clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
 
 	for (; rdata_len > 0; --rdata_len) {
-		if (test_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags))
-			force_poll = 1;
 		result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll);
 		if (result) {
-			printk(KERN_ERR PREFIX "read timeout, command = %d\n",
-			       command);
+			pr_err(PREFIX "read timeout, command = %d\n", command);
 			goto end;
 		}
 		/* Don't expect GPE after last read */
@@ -245,6 +274,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
 		*(rdata++) = acpi_ec_read_data(ec);
 	}
       end:
+	pr_debug(PREFIX "transaction end\n");
 	return result;
 }
 
@@ -273,8 +303,8 @@ static int acpi_ec_transaction(struct acpi_ec *ec, u8 command,
 
 	status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0);
 	if (status) {
-		printk(KERN_ERR PREFIX
-		       "input buffer is not empty, aborting transaction\n");
+		pr_err(PREFIX "input buffer is not empty, "
+				"aborting transaction\n");
 		goto end;
 	}
 
@@ -488,6 +518,7 @@ static u32 acpi_ec_gpe_handler(void *data)
 	acpi_status status = AE_OK;
 	struct acpi_ec *ec = data;
 
+	pr_debug(PREFIX "~~~> interrupt\n");
 	clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
 	if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))
 		wake_up(&ec->wait);
@@ -498,7 +529,8 @@ static u32 acpi_ec_gpe_handler(void *data)
 				acpi_ec_gpe_query, ec);
 	} else if (unlikely(!test_bit(EC_FLAGS_GPE_MODE, &ec->flags))) {
 		/* this is non-query, must be confirmation */
-		printk(KERN_INFO PREFIX "non-query interrupt received,"
+		if (printk_ratelimit())
+			pr_info(PREFIX "non-query interrupt received,"
 				" switching to interrupt mode\n");
 		set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
 	}
@@ -701,10 +733,10 @@ static void ec_remove_handlers(struct acpi_ec *ec)
 {
 	if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
 				ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
-		printk(KERN_ERR PREFIX "failed to remove space handler\n");
+		pr_err(PREFIX "failed to remove space handler\n");
 	if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe,
 				&acpi_ec_gpe_handler)))
-		printk(KERN_ERR PREFIX "failed to remove gpe handler\n");
+		pr_err(PREFIX "failed to remove gpe handler\n");
 	ec->handlers_installed = 0;
 }
 
@@ -747,9 +779,9 @@ static int acpi_ec_add(struct acpi_device *device)
 		first_ec = ec;
 	acpi_driver_data(device) = ec;
 	acpi_ec_add_fs(device);
-	printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
+	pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
 			  ec->gpe, ec->command_addr, ec->data_addr);
-	printk(KERN_INFO PREFIX "driver started in %s mode\n",
+	pr_info(PREFIX "driver started in %s mode\n",
 		(test_bit(EC_FLAGS_GPE_MODE, &ec->flags))?"interrupt":"poll");
 	return 0;
 }
@@ -875,18 +907,26 @@ int __init acpi_ec_ecdt_probe(void)
 	status = acpi_get_table(ACPI_SIG_ECDT, 1,
 				(struct acpi_table_header **)&ecdt_ptr);
 	if (ACPI_SUCCESS(status)) {
-		printk(KERN_INFO PREFIX "EC description table is found, configuring boot EC\n");
+		pr_info(PREFIX "EC description table is found, configuring boot EC\n");
 		boot_ec->command_addr = ecdt_ptr->control.address;
 		boot_ec->data_addr = ecdt_ptr->data.address;
 		boot_ec->gpe = ecdt_ptr->gpe;
 		boot_ec->handle = ACPI_ROOT_OBJECT;
 	} else {
+		/* This workaround is needed only on some broken machines,
+		 * which require early EC, but fail to provide ECDT */
+		acpi_handle x;
 		printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n");
 		status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device,
 						boot_ec, NULL);
 		/* Check that acpi_get_devices actually find something */
 		if (ACPI_FAILURE(status) || !boot_ec->handle)
 			goto error;
+		/* We really need to limit this workaround, the only ASUS,
+		 * which needs it, has fake EC._INI method, so use it as flag.
+		 */
+		if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &x)))
+			goto error;
 	}
 
 	ret = ec_install_handlers(boot_ec);

drivers/acpi/osl.c

@@ -387,17 +387,14 @@ acpi_status acpi_os_read_port(acpi_io_address port, u32 * value, u32 width)
 	if (!value)
 		value = &dummy;
 
-	switch (width) {
-	case 8:
+	*value = 0;
+	if (width <= 8) {
 		*(u8 *) value = inb(port);
-		break;
-	case 16:
+	} else if (width <= 16) {
 		*(u16 *) value = inw(port);
-		break;
-	case 32:
+	} else if (width <= 32) {
 		*(u32 *) value = inl(port);
-		break;
-	default:
+	} else {
 		BUG();
 	}
 
@@ -408,17 +405,13 @@ EXPORT_SYMBOL(acpi_os_read_port);
 
 acpi_status acpi_os_write_port(acpi_io_address port, u32 value, u32 width)
 {
-	switch (width) {
-	case 8:
+	if (width <= 8) {
 		outb(value, port);
-		break;
-	case 16:
+	} else if (width <= 16) {
 		outw(value, port);
-		break;
-	case 32:
+	} else if (width <= 32) {
 		outl(value, port);
-		break;
-	default:
+	} else {
 		BUG();
 	}
 

drivers/acpi/processor_core.c

@@ -612,12 +612,6 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
 		request_region(pr->throttling.address, 6, "ACPI CPU throttle");
 	}
 
-#ifdef CONFIG_CPU_FREQ
-	acpi_processor_ppc_has_changed(pr);
-#endif
-	acpi_processor_get_throttling_info(pr);
-	acpi_processor_get_limit_info(pr);
-
 	return 0;
 }
 
@@ -647,7 +641,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device)
 	 */
 	if (processor_device_array[pr->id] != NULL &&
 	    processor_device_array[pr->id] != device) {
-		printk(KERN_WARNING "BIOS reported wrong ACPI id"
+		printk(KERN_WARNING "BIOS reported wrong ACPI id "
 			"for the processor\n");
 		return -ENODEV;
 	}
@@ -665,6 +659,12 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device)
 	/* _PDC call should be done before doing anything else (if reqd.). */
 	arch_acpi_processor_init_pdc(pr);
 	acpi_processor_set_pdc(pr);
+#ifdef CONFIG_CPU_FREQ
+	acpi_processor_ppc_has_changed(pr);
+#endif
+	acpi_processor_get_throttling_info(pr);
+	acpi_processor_get_limit_info(pr);
+
 
 	acpi_processor_power_init(pr, device);
 
@@ -684,7 +684,7 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data)
 {
 	struct acpi_processor *pr = data;
 	struct acpi_device *device = NULL;
-
+	int saved;
 
 	if (!pr)
 		return;
@@ -694,7 +694,10 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data)
 
 	switch (event) {
 	case ACPI_PROCESSOR_NOTIFY_PERFORMANCE:
+		saved = pr->performance_platform_limit;
 		acpi_processor_ppc_has_changed(pr);
+		if (saved == pr->performance_platform_limit)
+			break;
 		acpi_bus_generate_proc_event(device, event,
 					pr->performance_platform_limit);
 		acpi_bus_generate_netlink_event(device->pnp.device_class,

drivers/acpi/processor_idle.c

@@ -197,6 +197,19 @@ static inline u32 ticks_elapsed_in_us(u32 t1, u32 t2)
 		return PM_TIMER_TICKS_TO_US((0xFFFFFFFF - t1) + t2);
 }
 
+static void acpi_safe_halt(void)
+{
+	current_thread_info()->status &= ~TS_POLLING;
+	/*
+	 * TS_POLLING-cleared state must be visible before we
+	 * test NEED_RESCHED:
+	 */
+	smp_mb();
+	if (!need_resched())
+		safe_halt();
+	current_thread_info()->status |= TS_POLLING;
+}
+
 #ifndef CONFIG_CPU_IDLE
 
 static void
@@ -239,19 +252,6 @@ acpi_processor_power_activate(struct acpi_processor *pr,
 	return;
 }
 
-static void acpi_safe_halt(void)
-{
-	current_thread_info()->status &= ~TS_POLLING;
-	/*
-	 * TS_POLLING-cleared state must be visible before we
-	 * test NEED_RESCHED:
-	 */
-	smp_mb();
-	if (!need_resched())
-		safe_halt();
-	current_thread_info()->status |= TS_POLLING;
-}
-
 static atomic_t c3_cpu_count;
 
 /* Common C-state entry for C2, C3, .. */
@@ -1373,15 +1373,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
 	if (pr->flags.bm_check)
 		acpi_idle_update_bm_rld(pr, cx);
 
-	current_thread_info()->status &= ~TS_POLLING;
-	/*
-	 * TS_POLLING-cleared state must be visible before we test
-	 * NEED_RESCHED:
-	 */
-	smp_mb();
-	if (!need_resched())
-		safe_halt();
-	current_thread_info()->status |= TS_POLLING;
+	acpi_safe_halt();
 
 	cx->usage++;
 
@@ -1399,6 +1391,8 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 	struct acpi_processor *pr;
 	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
 	u32 t1, t2;
+	int sleep_ticks = 0;
+
 	pr = processors[smp_processor_id()];
 
 	if (unlikely(!pr))
@@ -1428,6 +1422,8 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 		ACPI_FLUSH_CPU_CACHE();
 
 	t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
+	/* Tell the scheduler that we are going deep-idle: */
+	sched_clock_idle_sleep_event();
 	acpi_state_timer_broadcast(pr, cx, 1);
 	acpi_idle_do_entry(cx);
 	t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
@@ -1436,6 +1432,10 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 	/* TSC could halt in idle, so notify users */
 	mark_tsc_unstable("TSC halts in idle");;
 #endif
+	sleep_ticks = ticks_elapsed(t1, t2);
+
+	/* Tell the scheduler how much we idled: */
+	sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
 
 	local_irq_enable();
 	current_thread_info()->status |= TS_POLLING;
@@ -1443,7 +1443,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 	cx->usage++;
 
 	acpi_state_timer_broadcast(pr, cx, 0);
-	cx->time += ticks_elapsed(t1, t2);
+	cx->time += sleep_ticks;
 	return ticks_elapsed_in_us(t1, t2);
 }
 
@@ -1463,6 +1463,8 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 	struct acpi_processor *pr;
 	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
 	u32 t1, t2;
+	int sleep_ticks = 0;
+
 	pr = processors[smp_processor_id()];
 
 	if (unlikely(!pr))
@@ -1471,6 +1473,15 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 	if (acpi_idle_suspend)
 		return(acpi_idle_enter_c1(dev, state));
 
+	if (acpi_idle_bm_check()) {
+		if (dev->safe_state) {
+			return dev->safe_state->enter(dev, dev->safe_state);
+		} else {
+			acpi_safe_halt();
+			return 0;
+		}
+	}
+
 	local_irq_disable();
 	current_thread_info()->status &= ~TS_POLLING;
 	/*
@@ -1485,37 +1496,44 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 		return 0;
 	}
 
+	/* Tell the scheduler that we are going deep-idle: */
+	sched_clock_idle_sleep_event();
 	/*
 	 * Must be done before busmaster disable as we might need to
 	 * access HPET !
 	 */
 	acpi_state_timer_broadcast(pr, cx, 1);
 
-	if (acpi_idle_bm_check()) {
-		cx = pr->power.bm_state;
-
-		acpi_idle_update_bm_rld(pr, cx);
-
-		t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
-		acpi_idle_do_entry(cx);
-		t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
-	} else {
 	acpi_idle_update_bm_rld(pr, cx);
 
+	/*
+	 * disable bus master
+	 * bm_check implies we need ARB_DIS
+	 * !bm_check implies we need cache flush
+	 * bm_control implies whether we can do ARB_DIS
+	 *
+	 * That leaves a case where bm_check is set and bm_control is
+	 * not set. In that case we cannot do much, we enter C3
+	 * without doing anything.
+	 */
+	if (pr->flags.bm_check && pr->flags.bm_control) {
 		spin_lock(&c3_lock);
 		c3_cpu_count++;
 		/* Disable bus master arbitration when all CPUs are in C3 */
 		if (c3_cpu_count == num_online_cpus())
 			acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
 		spin_unlock(&c3_lock);
+	} else if (!pr->flags.bm_check) {
+		ACPI_FLUSH_CPU_CACHE();
+	}
 
 	t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
 	acpi_idle_do_entry(cx);
 	t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
 
-		spin_lock(&c3_lock);
 	/* Re-enable bus master arbitration */
-		if (c3_cpu_count == num_online_cpus())
+	if (pr->flags.bm_check && pr->flags.bm_control) {
+		spin_lock(&c3_lock);
 		acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
 		c3_cpu_count--;
 		spin_unlock(&c3_lock);
@@ -1525,6 +1543,9 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 	/* TSC could halt in idle, so notify users */
 	mark_tsc_unstable("TSC halts in idle");
 #endif
+	sleep_ticks = ticks_elapsed(t1, t2);
+	/* Tell the scheduler how much we idled: */
+	sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
 
 	local_irq_enable();
 	current_thread_info()->status |= TS_POLLING;
@@ -1532,7 +1553,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 	cx->usage++;
 
 	acpi_state_timer_broadcast(pr, cx, 0);
-	cx->time += ticks_elapsed(t1, t2);
+	cx->time += sleep_ticks;
 	return ticks_elapsed_in_us(t1, t2);
 }
 
@@ -1584,12 +1605,14 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
 			case ACPI_STATE_C1:
 			state->flags |= CPUIDLE_FLAG_SHALLOW;
 			state->enter = acpi_idle_enter_c1;
+			dev->safe_state = state;
 			break;
 
 			case ACPI_STATE_C2:
 			state->flags |= CPUIDLE_FLAG_BALANCED;
 			state->flags |= CPUIDLE_FLAG_TIME_VALID;
 			state->enter = acpi_idle_enter_simple;
+			dev->safe_state = state;
 			break;
 
 			case ACPI_STATE_C3:
@@ -1610,14 +1633,6 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
 	if (!count)
 		return -EINVAL;
 
-	/* find the deepest state that can handle active BM */
-	if (pr->flags.bm_check) {
-		for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++)
-			if (pr->power.states[i].type == ACPI_STATE_C3)
-				break;
-		pr->power.bm_state = &pr->power.states[i-1];
-	}
-
 	return 0;
 }
 

drivers/acpi/sbs.c

@@ -29,7 +29,7 @@
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <asm/uaccess.h>
@@ -88,7 +88,7 @@ MODULE_DEVICE_TABLE(acpi, sbs_device_ids);
 struct acpi_battery {
 	struct power_supply bat;
 	struct acpi_sbs *sbs;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	struct proc_dir_entry *proc_entry;
 #endif
 	unsigned long update_time;
@@ -113,6 +113,7 @@ struct acpi_battery {
 	u16 spec;
 	u8 id;
 	u8 present:1;
+	u8 have_sysfs_alarm:1;
 };
 
 #define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
@@ -122,7 +123,7 @@ struct acpi_sbs {
 	struct acpi_device *device;
 	struct acpi_smb_hc *hc;
 	struct mutex lock;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	struct proc_dir_entry *charger_entry;
 #endif
 	struct acpi_battery battery[MAX_SBS_BAT];
@@ -468,7 +469,7 @@ static struct device_attribute alarm_attr = {
                               FS Interface (/proc/acpi)
    -------------------------------------------------------------------------- */
 
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 /* Generic Routines */
 static int
 acpi_sbs_add_fs(struct proc_dir_entry **dir,
@@ -789,7 +790,7 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id)
 		return result;
 
 	sprintf(battery->name, ACPI_BATTERY_DIR_NAME, id);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_sbs_add_fs(&battery->proc_entry, acpi_battery_dir,
 			battery->name, &acpi_battery_info_fops,
 			&acpi_battery_state_fops, &acpi_battery_alarm_fops,
@@ -808,7 +809,13 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id)
 	}
 	battery->bat.get_property = acpi_sbs_battery_get_property;
 	result = power_supply_register(&sbs->device->dev, &battery->bat);
-	device_create_file(battery->bat.dev, &alarm_attr);
+	if (result)
+		goto end;
+	result = device_create_file(battery->bat.dev, &alarm_attr);
+	if (result)
+		goto end;
+	battery->have_sysfs_alarm = 1;
+      end:
 	printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n",
 	       ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device),
 	       battery->name, sbs->battery->present ? "present" : "absent");
@@ -817,14 +824,16 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id)
 
 static void acpi_battery_remove(struct acpi_sbs *sbs, int id)
 {
-	if (sbs->battery[id].bat.dev)
-		device_remove_file(sbs->battery[id].bat.dev, &alarm_attr);
-		power_supply_unregister(&sbs->battery[id].bat);
-#ifdef CONFIG_ACPI_PROCFS
-	if (sbs->battery[id].proc_entry) {
-		acpi_sbs_remove_fs(&(sbs->battery[id].proc_entry),
-				   acpi_battery_dir);
+	struct acpi_battery *battery = &sbs->battery[id];
+
+	if (battery->bat.dev) {
+		if (battery->have_sysfs_alarm)
+			device_remove_file(battery->bat.dev, &alarm_attr);
+		power_supply_unregister(&battery->bat);
 	}
+#ifdef CONFIG_ACPI_PROCFS_POWER
+	if (battery->proc_entry)
+		acpi_sbs_remove_fs(&battery->proc_entry, acpi_battery_dir);
 #endif
 }
 
@@ -835,7 +844,7 @@ static int acpi_charger_add(struct acpi_sbs *sbs)
 	result = acpi_ac_get_present(sbs);
 	if (result)
 		goto end;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	result = acpi_sbs_add_fs(&sbs->charger_entry, acpi_ac_dir,
 				 ACPI_AC_DIR_NAME, NULL,
 				 &acpi_ac_state_fops, NULL, sbs);
@@ -859,7 +868,7 @@ static void acpi_charger_remove(struct acpi_sbs *sbs)
 {
 	if (sbs->charger.dev)
 		power_supply_unregister(&sbs->charger);
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	if (sbs->charger_entry)
 		acpi_sbs_remove_fs(&sbs->charger_entry, acpi_ac_dir);
 #endif
@@ -965,7 +974,7 @@ static int acpi_sbs_remove(struct acpi_device *device, int type)
 
 static void acpi_sbs_rmdirs(void)
 {
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	if (acpi_ac_dir) {
 		acpi_unlock_ac_dir(acpi_ac_dir);
 		acpi_ac_dir = NULL;
@@ -1004,7 +1013,7 @@ static int __init acpi_sbs_init(void)
 
 	if (acpi_disabled)
 		return -ENODEV;
-#ifdef CONFIG_ACPI_PROCFS
+#ifdef CONFIG_ACPI_PROCFS_POWER
 	acpi_ac_dir = acpi_lock_ac_dir();
 	if (!acpi_ac_dir)
 		return -ENODEV;

drivers/acpi/tables/tbutils.c

@@ -449,7 +449,7 @@ acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags)
 			/* XSDT has NULL entry, RSDT is used */
 			address = rsdt_address;
 			table_entry_size = sizeof(u32);
-			ACPI_WARNING((AE_INFO, "BIOS XSDT has NULL entry,"
+			ACPI_WARNING((AE_INFO, "BIOS XSDT has NULL entry, "
 					"using RSDT"));
 		}
 	}

drivers/acpi/video.c

@@ -29,6 +29,7 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/list.h>
+#include <linux/mutex.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/input.h>
@@ -135,8 +136,8 @@ struct acpi_video_bus {
 	u8 attached_count;
 	struct acpi_video_bus_cap cap;
 	struct acpi_video_bus_flags flags;
-	struct semaphore sem;
 	struct list_head video_device_list;
+	struct mutex device_list_lock;	/* protects video_device_list */
 	struct proc_dir_entry *dir;
 	struct input_dev *input;
 	char phys[32];	/* for input device */
@@ -896,7 +897,7 @@ acpi_video_device_write_brightness(struct file *file,
 {
 	struct seq_file *m = file->private_data;
 	struct acpi_video_device *dev = m->private;
-	char str[4] = { 0 };
+	char str[5] = { 0 };
 	unsigned int level = 0;
 	int i;
 
@@ -1436,9 +1437,9 @@ acpi_video_bus_get_one_device(struct acpi_device *device,
 			return -ENODEV;
 		}
 
-		down(&video->sem);
+		mutex_lock(&video->device_list_lock);
 		list_add_tail(&data->entry, &video->video_device_list);
-		up(&video->sem);
+		mutex_unlock(&video->device_list_lock);
 
 		acpi_video_device_add_fs(device);
 
@@ -1462,12 +1463,14 @@ acpi_video_bus_get_one_device(struct acpi_device *device,
 
 static void acpi_video_device_rebind(struct acpi_video_bus *video)
 {
-	struct list_head *node, *next;
-	list_for_each_safe(node, next, &video->video_device_list) {
-		struct acpi_video_device *dev =
-		    container_of(node, struct acpi_video_device, entry);
+	struct acpi_video_device *dev;
+
+	mutex_lock(&video->device_list_lock);
+
+	list_for_each_entry(dev, &video->video_device_list, entry)
 		acpi_video_device_bind(video, dev);
-	}
+
+	mutex_unlock(&video->device_list_lock);
 }
 
 /*
@@ -1592,30 +1595,33 @@ static int acpi_video_device_enumerate(struct acpi_video_bus *video)
 
 static int acpi_video_switch_output(struct acpi_video_bus *video, int event)
 {
-	struct list_head *node, *next;
+	struct list_head *node;
 	struct acpi_video_device *dev = NULL;
 	struct acpi_video_device *dev_next = NULL;
 	struct acpi_video_device *dev_prev = NULL;
 	unsigned long state;
 	int status = 0;
 
+	mutex_lock(&video->device_list_lock);
 
-	list_for_each_safe(node, next, &video->video_device_list) {
+	list_for_each(node, &video->video_device_list) {
 		dev = container_of(node, struct acpi_video_device, entry);
 		status = acpi_video_device_get_state(dev, &state);
 		if (state & 0x2) {
-			dev_next =
-			    container_of(node->next, struct acpi_video_device,
-					 entry);
-			dev_prev =
-			    container_of(node->prev, struct acpi_video_device,
-					 entry);
+			dev_next = container_of(node->next,
+					struct acpi_video_device, entry);
+			dev_prev = container_of(node->prev,
+					struct acpi_video_device, entry);
 			goto out;
 		}
 	}
+
 	dev_next = container_of(node->next, struct acpi_video_device, entry);
 	dev_prev = container_of(node->prev, struct acpi_video_device, entry);
+
  out:
+	mutex_unlock(&video->device_list_lock);
+
 	switch (event) {
 	case ACPI_VIDEO_NOTIFY_CYCLE:
 	case ACPI_VIDEO_NOTIFY_NEXT_OUTPUT:
@@ -1691,24 +1697,17 @@ acpi_video_bus_get_devices(struct acpi_video_bus *video,
 			   struct acpi_device *device)
 {
 	int status = 0;
-	struct list_head *node, *next;
-
+	struct acpi_device *dev;
 
 	acpi_video_device_enumerate(video);
 
-	list_for_each_safe(node, next, &device->children) {
-		struct acpi_device *dev =
-		    list_entry(node, struct acpi_device, node);
-
-		if (!dev)
-			continue;
+	list_for_each_entry(dev, &device->children, node) {
 
 		status = acpi_video_bus_get_one_device(dev, video);
 		if (ACPI_FAILURE(status)) {
 			ACPI_EXCEPTION((AE_INFO, status, "Cant attach device"));
 			continue;
 		}
-
 	}
 	return status;
 }
@@ -1724,9 +1723,6 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device)
 
 	video = device->video;
 
-	down(&video->sem);
-	list_del(&device->entry);
-	up(&video->sem);
 	acpi_video_device_remove_fs(device->dev);
 
 	status = acpi_remove_notify_handler(device->dev->handle,
@@ -1734,31 +1730,33 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device)
 					    acpi_video_device_notify);
 	backlight_device_unregister(device->backlight);
 	video_output_unregister(device->output_dev);
+
 	return 0;
 }
 
 static int acpi_video_bus_put_devices(struct acpi_video_bus *video)
 {
 	int status;
-	struct list_head *node, *next;
+	struct acpi_video_device *dev, *next;
 
+	mutex_lock(&video->device_list_lock);
 
-	list_for_each_safe(node, next, &video->video_device_list) {
-		struct acpi_video_device *data =
-		    list_entry(node, struct acpi_video_device, entry);
-		if (!data)
-			continue;
+	list_for_each_entry_safe(dev, next, &video->video_device_list, entry) {
 
-		status = acpi_video_bus_put_one_device(data);
+		status = acpi_video_bus_put_one_device(dev);
 		if (ACPI_FAILURE(status))
 			printk(KERN_WARNING PREFIX
 			       "hhuuhhuu bug in acpi video driver.\n");
 
-		if (data->brightness)
-			kfree(data->brightness->levels);
-		kfree(data->brightness);
-		kfree(data);
+		if (dev->brightness) {
+			kfree(dev->brightness->levels);
+			kfree(dev->brightness);
 		}
+		list_del(&dev->entry);
+		kfree(dev);
+	}
+
+	mutex_unlock(&video->device_list_lock);
 
 	return 0;
 }
@@ -1782,9 +1780,6 @@ static void acpi_video_bus_notify(acpi_handle handle, u32 event, void *data)
 	struct input_dev *input;
 	int keycode;
 
-
-	printk("video bus notify\n");
-
 	if (!video)
 		return;
 
@@ -1897,14 +1892,10 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)
 static int instance;
 static int acpi_video_bus_add(struct acpi_device *device)
 {
-	int result = 0;
-	acpi_status status = 0;
-	struct acpi_video_bus *video = NULL;
+	acpi_status status;
+	struct acpi_video_bus *video;
 	struct input_dev *input;
-
-
-	if (!device)
-		return -EINVAL;
+	int error;
 
 	video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL);
 	if (!video)
@@ -1923,15 +1914,15 @@ static int acpi_video_bus_add(struct acpi_device *device)
 	acpi_driver_data(device) = video;
 
 	acpi_video_bus_find_cap(video);
-	result = acpi_video_bus_check(video);
-	if (result)
-		goto end;
+	error = acpi_video_bus_check(video);
+	if (error)
+		goto err_free_video;
 
-	result = acpi_video_bus_add_fs(device);
-	if (result)
-		goto end;
+	error = acpi_video_bus_add_fs(device);
+	if (error)
+		goto err_free_video;
 
-	init_MUTEX(&video->sem);
+	mutex_init(&video->device_list_lock);
 	INIT_LIST_HEAD(&video->video_device_list);
 
 	acpi_video_bus_get_devices(video, device);
@@ -1943,16 +1934,15 @@ static int acpi_video_bus_add(struct acpi_device *device)
 	if (ACPI_FAILURE(status)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Error installing notify handler\n"));
-		acpi_video_bus_stop_devices(video);
-		acpi_video_bus_put_devices(video);
-		kfree(video->attached_array);
-		acpi_video_bus_remove_fs(device);
-		result = -ENODEV;
-		goto end;
+		error = -ENODEV;
+		goto err_stop_video;
 	}
 
-
 	video->input = input = input_allocate_device();
+	if (!input) {
+		error = -ENOMEM;
+		goto err_uninstall_notify;
+	}
 
 	snprintf(video->phys, sizeof(video->phys),
 		"%s/video/input0", acpi_device_hid(video->device));
@@ -1961,6 +1951,7 @@ static int acpi_video_bus_add(struct acpi_device *device)
 	input->phys = video->phys;
 	input->id.bustype = BUS_HOST;
 	input->id.product = 0x06;
+	input->dev.parent = &device->dev;
 	input->evbit[0] = BIT(EV_KEY);
 	set_bit(KEY_SWITCHVIDEOMODE, input->keybit);
 	set_bit(KEY_VIDEO_NEXT, input->keybit);
@@ -1971,18 +1962,10 @@ static int acpi_video_bus_add(struct acpi_device *device)
 	set_bit(KEY_BRIGHTNESS_ZERO, input->keybit);
 	set_bit(KEY_DISPLAY_OFF, input->keybit);
 	set_bit(KEY_UNKNOWN, input->keybit);
-	result = input_register_device(input);
-	if (result) {
-		acpi_remove_notify_handler(video->device->handle,
-						ACPI_DEVICE_NOTIFY,
-						acpi_video_bus_notify);
-		acpi_video_bus_stop_devices(video);
-		acpi_video_bus_put_devices(video);
-		kfree(video->attached_array);
-		acpi_video_bus_remove_fs(device);
-		goto end;
-        }
 
+	error = input_register_device(input);
+	if (error)
+		goto err_free_input_dev;
 
 	printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s  rom: %s  post: %s)\n",
 	       ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device),
@@ -1990,11 +1973,23 @@ static int acpi_video_bus_add(struct acpi_device *device)
 	       video->flags.rom ? "yes" : "no",
 	       video->flags.post ? "yes" : "no");
 
-      end:
-	if (result)
+	return 0;
+
+ err_free_input_dev:
+	input_free_device(input);
+ err_uninstall_notify:
+	acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
+				   acpi_video_bus_notify);
+ err_stop_video:
+	acpi_video_bus_stop_devices(video);
+	acpi_video_bus_put_devices(video);
+	kfree(video->attached_array);
+	acpi_video_bus_remove_fs(device);
+ err_free_video:
 	kfree(video);
+	acpi_driver_data(device) = NULL;
 
-	return result;
+	return error;
 }
 
 static int acpi_video_bus_remove(struct acpi_device *device, int type)

drivers/misc/thinkpad_acpi.h

@@ -84,7 +84,7 @@
 
 /* ThinkPad CMOS NVRAM constants */
 #define TP_NVRAM_ADDR_BRIGHTNESS       0x5e
-#define TP_NVRAM_MASK_LEVEL_BRIGHTNESS 0x07
+#define TP_NVRAM_MASK_LEVEL_BRIGHTNESS 0x0f
 #define TP_NVRAM_POS_LEVEL_BRIGHTNESS 0
 
 #define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
@@ -246,6 +246,7 @@ static struct {
 	u32 hotkey_wlsw:1;
 	u32 light:1;
 	u32 light_status:1;
+	u32 bright_16levels:1;
 	u32 wan:1;
 	u32 fan_ctrl_status_undef:1;
 	u32 input_device_registered:1;
@@ -338,6 +339,7 @@ static int bluetooth_write(char *buf);
 static struct backlight_device *ibm_backlight_device;
 static int brightness_offset = 0x31;
 static int brightness_mode;
+static unsigned int brightness_enable;	/* 0 = no, 1 = yes, 2 = auto */
 
 static int brightness_init(struct ibm_init_struct *iibm);
 static void brightness_exit(void);

drivers/pnp/pnpacpi/rsparser.c

@@ -75,6 +75,7 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_resource_table *res,
 {
 	int i = 0;
 	int irq;
+	int p, t;
 
 	if (!valid_IRQ(gsi))
 		return;
@@ -85,15 +86,22 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_resource_table *res,
 	if (i >= PNP_MAX_IRQ)
 		return;
 
-#ifdef CONFIG_X86
-	if (gsi < 16 && (triggering != ACPI_EDGE_SENSITIVE ||
-				polarity != ACPI_ACTIVE_HIGH)) {
-		pnp_warn("BIOS BUG: legacy PNP IRQ %d should be edge trigger, "
-				"active high", gsi);
-		triggering = ACPI_EDGE_SENSITIVE;
-		polarity = ACPI_ACTIVE_HIGH;
+	/*
+	 * in IO-APIC mode, use overrided attribute. Two reasons:
+	 * 1. BIOS bug in DSDT
+	 * 2. BIOS uses IO-APIC mode Interrupt Source Override
+	 */
+	if (!acpi_get_override_irq(gsi, &t, &p)) {
+		t = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
+		p = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
+
+		if (triggering != t || polarity != p) {
+			pnp_warn("IRQ %d override to %s, %s",
+				gsi, t ? "edge":"level", p ? "low":"high");
+			triggering = t;
+			polarity = p;
+		}
 	}
-#endif
 
 	res->irq_resource[i].flags = IORESOURCE_IRQ;	// Also clears _UNSET flag
 	res->irq_resource[i].flags |= irq_flags(triggering, polarity);

include/acpi/processor.h

@@ -78,7 +78,6 @@ struct acpi_processor_cx {
 struct acpi_processor_power {
 	struct cpuidle_device dev;
 	struct acpi_processor_cx *state;
-	struct acpi_processor_cx *bm_state;
 	unsigned long bm_check_timestamp;
 	u32 default_state;
 	u32 bm_activity;

include/linux/acpi.h

@@ -132,6 +132,11 @@ extern unsigned long acpi_realmode_flags;
 int acpi_register_gsi (u32 gsi, int triggering, int polarity);
 int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
 
+#ifdef CONFIG_X86_IO_APIC
+extern int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity);
+#else
+#define acpi_get_override_irq(bus, trigger, polarity) (-1)
+#endif
 /*
  * This function undoes the effect of one call to acpi_register_gsi().
  * If this matches the last registration, any IRQ resources for gsi

include/linux/cpuidle.h

@@ -92,6 +92,7 @@ struct cpuidle_device {
 	struct kobject		kobj;
 	struct completion	kobj_unregister;
 	void			*governor_data;
+	struct cpuidle_state	*safe_state;
 };
 
 DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);