Commit 6d4518d7 authored by Peter Teichmann's avatar Peter Teichmann Committed by Russell King

[ARM] 3346/1: Fix udelay() for HZ values different from 100

Patch from Peter Teichmann

Currently, if the kernels HZ value is greater than 100, delays with the udelay function are too short. This can cause trouble for instance with the zd1201 usb wlan driver.

This patch suggests a solution that keeps the overhead small and maintains (hopefully) sufficient resolution.

Signed-off-by: Peter Teichmann
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 0328ad23
......@@ -9,28 +9,32 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/param.h>
.text
.LC0: .word loops_per_jiffy
.LC1: .word (2199023*HZ)>>11
/*
* 0 <= r0 <= 2000
* r0 <= 2000
* lpj <= 0x01ffffff (max. 3355 bogomips)
* HZ <= 1000
*/
ENTRY(__udelay)
mov r2, #0x6800
orr r2, r2, #0x00db
ldr r2, .LC1
mul r0, r2, r0
ENTRY(__const_udelay) @ 0 <= r0 <= 0x01ffffff
ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06
ldr r2, .LC0
ldr r2, [r2] @ max = 0x0fffffff
mov r0, r0, lsr #11 @ max = 0x00003fff
mov r2, r2, lsr #11 @ max = 0x0003ffff
ldr r2, [r2] @ max = 0x01ffffff
mov r0, r0, lsr #14 @ max = 0x0001ffff
mov r2, r2, lsr #10 @ max = 0x00007fff
mul r0, r2, r0 @ max = 2^32-1
movs r0, r0, lsr #6
RETINSTR(moveq,pc,lr)
/*
* loops = (r0 * 0x10c6 * 100 * loops_per_jiffy) / 2^32
* loops = r0 * HZ * loops_per_jiffy / 1000000
*
* Oh, if only we had a cycle counter...
*/
......
......@@ -6,6 +6,8 @@
#ifndef __ASM_ARM_DELAY_H
#define __ASM_ARM_DELAY_H
#include <asm/param.h> /* HZ */
extern void __delay(int loops);
/*
......@@ -13,7 +15,7 @@ extern void __delay(int loops);
* it, it means that you're calling udelay() with an out of range value.
*
* With currently imposed limits, this means that we support a max delay
* of 2000us and 671 bogomips
* of 2000us. Further limits: HZ<=1000 and bogomips<=3355
*/
extern void __bad_udelay(void);
......@@ -35,7 +37,7 @@ extern void __const_udelay(unsigned long);
#define udelay(n) \
(__builtin_constant_p(n) ? \
((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \
__const_udelay((n) * 0x68dbul)) : \
__const_udelay((n) * ((2199023U*HZ)>>11))) : \
__udelay(n))
#endif /* defined(_ARM_DELAY_H) */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment